d
OPERATING INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MODE D’EMPLOI
CDC-X20M YU
CDC-X15 YU
STEREO CAR CD RECEIVER
RADIO-TOCADISCOS DE CD ESTEREOFONICO PARA
AUTOMOVIL
ENGLISH
ESPAÑOL
FRANÇAIS
c
OWNER’S RECORD
For your convenience, record the model number and
serial number (you will find them on the bottom of your
set) in the space provided below. Please refer to them
when you contact your AIWA dealer in case of difficulty.
Model No. CDC-X20M, CDC-X15
Serial No.
TABLE OF CONTENTS
PRECAUTIONS .................................................................................................................................. 3
DETACHING THE CONTROL PANEL ............................................................................................... 4
CONTROL PANEL .............................................................................................................................. 5
TURNING ON/OFF THE UNIT ........................................................................................................... 6
SELECTING FUNCTION .................................................................................................................... 6
SOUND ADJUSTMENTS ................................................................................................................... 7
RADIO OPERATION .......................................................................................................................... 8
PRESETTING STATIONS ................................................................................................................ 10
CD PLAYBACK ................................................................................................................................. 12
PROGRAM PLAY ............................................................................................................................. 14
SETTING THE CLOCK ..................................................................................................................... 15
CD CHANGER .................................................................................................................................. 16
SPECIFICATIONS ............................................................................................................................ 18
TROUBLESHOOTING ...................................................................................................................... 19
NOTE
FOR USE IN THE U.S.A.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the
equipment and receiver.
–Connect the equipment into an outlet on
circuit different from that to which the receiver
is connected.
–Consult the dealer or an experienced radio/
TV technician for help.
CAUTION
Modifications or adjustments to this product, which
are not expressly approved by the manufacturer,
may void the user’s right or authority to operate
this product.
EN
2
PRECAUTIONS
•Do not attempt to disassemble this unit. Laser
rays from the optical pickup are dangerous to
the eyes.
•Make sure that pins or other foreign objects do
not get inside the unit; they may cause
malfunctioning, or a safety hazard such as
electrical shock or exposure of laser rays.
•When your car is parked under direct sunlight in
summer, there may be a considerable rise in
temperature inside the car. Ensure to let the
ambient temperature cool down before operating
the unit.
• This unit is designed to be operated on a 12 volt
DC negative ground electrical system only.
•When replacing the fuse, be sure to use the fuse
whose amperage rating is identical. Use of a
fuse with higher amperage may cause serious
damage to the unit.
Notes on CDs
•A defective or soiled disc inserted into the unit
can cause sound to drop out during playback.
•Handle the disc by holding its inner and outer
edges.
•Do not touch the surface of the unlabeled side
of the disc.
•Do not stick paper or tape etc. on the surface.
•Do not expose the disc to direct sunlight or
excessive heat.
ENGLISH
•Clean the disc before playback. Wipe the disc
from the center outward with a cleaning cloth.
•Never use solvents such as benzine or alcohol
to clean the disc.
•Smaller 3-inch (8cm) CDs can not be played on
this unit. And do not use adaptor as it may
cause malfunctioning.
EN
3
DETACHING THE CONTROL PANEL
You can detach the control panel from the unit and carry it with you when you leave your car unattended.
1 If a disc is inserted, remove it to prevent possible
damage to the unit.
2 Press PWR to turn the unit off.
2
3 While supporting the control panel with one hand,
% to release one side of the panel. Care must
press
be taken not to drop the panel as it may suddenly
eject at this point.
3
4 When the control panel is lifted from the unit,
remove it by pulling away from the unit.
Note
• Put the control panel inside the supplied carrying case to protect it from being damaged when you carry
it with you.
Attaching the control panel
EN
4
CONTROL PANEL
412 3 5 6
90 @#$%^& *(!
Display window
1 % (detach) button
2 PWR (power) button
3 A.M (auto memory) button
4 DISP (display) button
5 FUNC (function) button
6 Disc compartment
7 BAND button
8 LOAD/EJECT z button
9 AUDIO CTRL +/- (audio control) button
0 MOD/LD (mode/loudness) button
! Preset Station buttons 1 – 6
@ INT (intro) button
# RPT (repeat) button
$ RPT1 (repeat 1) button (CDC-X20M only)
% PROG (program) button
78
PROGRNDMDISC ST INT RPT1 LUD
^ RDM (random) button
& e (play/pause) button
* SEEK r/t button
( TUNE/DISC M/N button (CDC-X20M
only)
TUNE M/N button (CDC-X15 only)
) DISC indicator
- ST (stereo) indicator
= RNDM (random) indicator
q PROG (program) indicator
w INT (intro) indicator
e RPT1 (repeat, repeat 1) indicator
r LUD (loud) indicator
t Main Display section
EN
5
TURNING ON/OFF THE UNIT
To turn on the unit
Press PWR or any other button (except %).
To turn off the unit
Press PWR.
SELECTING FUNCTION
EN
To select the function
Press FUNC repeatedly.
The function changes in the following order.
Radio CD CD changer*
* CMT indicator lights up when ADC-M35 is connected. (CDC-
1
X20M only)
6