Sony Camcorder Wireless Microphone User Manual
by Sony Professional Audio
Systems Configurations for Professional Camcorders
& Video Acquisition Group
-Table of Contents -
Overview of Sony Wireless Guide ………………..………………. 1-4
Configuration #1 WRR-855A/810A UHF Diversity Tune………….... 5
Configuration #2 Single WRR-855A / 810A / 805A UHF Tuner …. 6, 7
Configuration #3 WRR-855A UHF Diversity Tuner ……………..… 7
Configuration #4 WRR-855A UHF Diversity Tuner ………………... 8
Sony Mounting Standards…………………………………….……….. 9
Optional Mounting Hardware & Accessories …………..….……..…... 9
Portable UHF Tuners ……………………………………………..… 10
UHF Body-Pack Transmitters ……………………….……………..... 11
Handheld UHF Transmitters …………………….………………..… 12
Suggested Application Packages ………………….…………….….. 13
Frequency Selection and Coordination Chart …………….…….. 15-18
Wireless Optional Accessories - Sales Models ………….…….. 19-21
Camcorder / Wireless Microphone Configuration Chart ….…….. 22-24
1. Select a suitable wireless receiver for the camcorder.
How to specify a complete wireless system:-Overview
• Use Overview of Camcorders for Wireless as help (Pages 1-4)
• Use Suggested Applications Packages as Guide (Pg. 13)
• Use Camcorder / Wireless Microphone Configuration Chart
as a guide. (Pg. 22-24)
• Select wireless receiver and transmitter using Wireless
Product overview as a guide (Pg. 10-12)
2. Select the required mounting accessories
• Use the Configuration #1 to #4 as guide (Pg. 5-9)
• Select optional accessories using the tables on (Pg. 8, 9, 19-21)
3. Select the channel allocation.
Since wireless use is a secondary use of the spectrum it is necessary to choose operating
frequencies not in (primary) use in a given area. If it is desired to use multiple wireless system
at once, it is recommended that the user consult the Regional Audio Manager for help in
choosing channels.
• Use Frequency Selection and Allocation Chart as first guide. (Pg. 15)
• Use Frequency Selection and Allocation Chart as a more detailed guide
(Pg.16-18)
-I-
Summary of Sony Camcorders and Wireless Capability:
OVERVIEW OF CAMCORDERS FOR WIRELESS:
1A. Sony Digital Camcorders with Built-in Wireless Slot
(Camcorder as shipped - See Page 5 of Wireless Guide for details)
Camcorder Model Wireless Models Second Wireless
DNW-7; DNW-9WS WRR-855A WRR-855A w/BTA-801
DNW-90; DNW-90WS or WRR-810
DNV-5 or WRR-805A
1B. Sony Digital Camcorders with Built-in Wireless Slot
(Camcorders retrofitted (w/QR-SDH) for Anton Bauer Ni-Cad Batteries)
See Page 5 of Wireless Guide for details.
Camcorder Model Wireless Models Second Wireless
DNW-7; DNW-9WS WRR-855A WRR-855A w/BTA-801
DNW-90; DNW-90WS or WRR-810
DNV-5 or WRR-805A
2A. Sony Digital Camcorders
(Camcorders as shipped. - See Page 6 of Wireless Guide for details.)
Camcorder Model Wireless Models Second Wireless
DVW-700; DVW-700WS WRR-855A w/BTA-801 No Provision
DVW-707;DVW-709WS or WRR-810A
DVW-790WS or WRR-805A
HDW-700(A)
HDW-F900
2B. Sony Digital Camcorders
(Camcorders retrofitted (w/QR-SDH) for Anton Bauer Ni-Cad Batteries.)
See Page 6 of Wireless Guide for details
Camcorder Model Wireless Models Second Wireless
DVW-700; DVW-700WS WRR-855A w/BTA-801 No Provision
HDW-700(A) or WRR-810
HDW-F900 or WRR-805A
-2-
2C. Sony Digital Camcorders
(Camcorders as shipped. - See Page 7 of Wireless Guide for details)
Camcorder Model Wireless Models Second Wireless
DSR-500WS; DSR-300 WRR-855A w/CA-WR855 No Provision
2D. Sony Digital Camcorders
Camcorders retrofitted (w/QR-DSR) for Anton Bauer Ni-Cad Batteries
See Page 9 of Wireless Guide for details
Camcorder Model Wireless Models Second Wireless
DSR-500WS; DSR-300 WRR-855A w/BTA-801 No Provision
3A. Sony Analog Camcorders - BetacamSP
(Camcorder as shipped w/NP-1 battery box , or retro fitted w/BP-90 battery box)
See Page 7 of Wireless Guide for details
Camcorder Model Wireless Models Second Wireless
BVW-D600 / D-600WS WRR-855A w/BTA-801 No Provision
BVW-400(A); BVW-300(A) or WRR-810A
BVW-200; BVV-5 or WRR-805A
UVW-100B; PVV-3
3B. Sony Analog Camcorders - BetacamSP
(Camcorder retrofitted with V-wedge mount (w/BKW-L601) for Li-Ion batteries. )
See Page 6 of Wireless Guide for details
Camcorder Model Wireless Models Second Wireless
BVW-D600 / D-600WS WRR-855A w/BTA-801 No Provision
BVW-400(A); BVW-300A or WRR-810A
BVW-200; BVV-5 or WRR-805A
UVW-100B; PVV-3
3C. Sony Analog Camcorders - BetacamSP
(Camcorders retrofitted (w/QRSP-200A or QRSP-400A) for use with Anton Bauer
Ni-Cad Batteries.)
See Page 6 of Wireless Guide for details.
Camcorder Model Wireless Models Second Wireless
BVW-D600 / D-600WS WRR-855A w/BTA-801 No Provision
BVW-400(A); BVW-300(A) or WRR-810A
BVW-200; BVV-5 or WRR-805A
UVW-100B; PVV-3
-3-
SONY
-Professional Camcorder/Wireless System Configuration Guide-
The following is a comprehensive guide for setting up the right Sony wireless system with
your camcorder. All configurations shown represent all current Sony professional camcorders and all
current Sony wireless microphone models. Here are a few easy steps to configuring the proper
system. Together with the details provided in this guide, these should help you to select the proper
wireless equipment for use with your camcorder.
In general, a diversity system tuner (such as the WRR-855A) is better for more
demanding applications. Especially where distance, or a lot of motion is a consideration,
since it will provide greater freedom from “dropouts” due to multi-path signals.
In most other applications (where the environment is more predictable or where distance is
not a factor), models such as the WRR-810A and WRR-805A will work very well and will
provide a more cost-effective solution.
In any case, the choice of a system is based on the following criteria:
A) Budget
B) Size and weight requirements
C) Application requirements (lavaliere or hand-held microphone) &
D) Working distance (RF output between 5mW and 50mW)
*Note: Any Sony 800MHz transmitter can be used with any model Sony 800MHz
receiver, as long as they are frequency matched (*See Frequency Selection.)
Please use the following as a guideline for determining your system’s requirements:
1) First, look at your camera: Is it a consumer model or broadcast model? What type of
battery mounting system does it have (V-wedge, NP-1, BKW-L601)? Does it have an
accessory DC power output? What type of audio connections does it have?
-This will help you determine which wireless models are directly compatible.
2) What mounting hardware comes with, or is available (optionally) for your camcorder?
-This will determine what (if any) additional hardware or accessories you will need to use
a wireless system with your camcorder.
3) What is your application? (ENG, Broadcast Production, Event Videography, etc…?)
-This will determine which is the right wireless system for you, once you have decided
your overall direction (*See Suggested Application Systems). Certainly, budget may also be a
consideration. That is why Sony has a wide selection of wireless components for every
application and budget.
-4-
(Betacam SX drop-in configuration)
bracket (plus X-0248-167-1 dual plate adapter for WRR-805A).
Configuration # 1: WRR-855A/810A UHF Diversity Tuners
-5Fig. 1
Fig.2
Fig.4
Models:
DNW-7
DNW-9WS
DNW-90
DNW-90WS
DNV-5 (dockable VTR)
SONY
Fig. 3
DNW-9WS, shown with
WRR-855A (above) in
breakaway. BPL-60 battery is
mounted via “V”-mount to rear
of camera. WRR-855A power
and audio connections are
automatically made via multi-
pin connector inside camera
Typical Package:
Required part: Qty
WRR-855A (tuner) 1
Transmitter 1
Option ( for 2nd tuner)
A8278-057-A bracket
WRR-855A 1
BTA-801 (ADAPTER) 1
Transmitter 1
1
The A8278-057-A bracket
Is supplied with all Digital Betacam
and HDW-700A camcorders, as well
as with the Optional BKW-L601
1
1
DNW-9WS, shown
with WRR-855A in same
configuration (installed-rear angle
view)
(shown) and audio via 12” XLR to
*SX camcorder shown with internally
mounted WRR-855A and WRR-810A
mounted externally with the optional
Note: As below in configuration # 2, an Anton Bauer battery adapter,
with their optional ABWMKKIT bracket, may be added for mounting
of an additional tuner with the above listed models. WRR-810A or
WRR-805A may also be used as a second tuner with the existing
DNW-9WS, shown with one
WRR-855A installed in same
configuration, plus a second
WRR-855A mounted to rear with
A-8278-057-A mount and BTA-
801A adapter. WRR-855A power
is via 4-pin DC connector
(supplied with BTA-801) to
camera accessory power jack
XLR connection (user supplied).
A-8278-057-A bracket.
Works with: Camcorders equipped with a NP-1 box, BP-90 (DC-500 box) BKW-L601 bracket -or- Anton Bauer battery
Configuration #2: Single WRR-855A / 810A / 805A UHF Tuners
adapter
This configuration applies to the following models:
Digital Betacam: Has Integrated Li-Ion Battery Mount (Vmount)
(Supplied w/ A8278-057-A bracket)
• Option: DC-L1 and DC-L90 Sony NiCad Box w/ V-wedge
Mounts
• Option: Anton Bauer QR-SDH Battery Mount w/
ABWMKKIT wireless adapter plate
Models:
DVW-700
DVW-700WS
DVW-707
DVW-709WS
DVW-790WS
HD-CAM: Has Integrated LiIon Battery Mount (V-mount)
(Supplied w/ A8278-057-A bracket)
• Option: DC-L1 and DC-L90 Sony Ni-Cad Mounts
• Option: Anton Bauer QR-SDH Battery Mount with
ABWMKKIT wireless adapter plate
Models:
HDW-700
HDW-700A
HDW-F900
* A-8278-057-A may be required for some models. See Configuration Chart.
This configuration applies to the following models:
Betacam/Betacam SP: Supplied with NP-1 box
• Option: BKW-L601 Li-Ion Battery Bracket
(Includes A8278-057-A wireless bracket)
• Option: Anton Bauer QRSP-200/400A Battery Mount
with ABWMKKIT wireless adapter plate (*see below)
Models:
BVW-300/300A* (QRSP-200A w/ ABWMKKIT)
BVW-400/400A* (QRSP-400A w/ ABWMKKIT)
BVW-D600 (QRSP-400A w/ ABWMKKIT)
BVW-D600WS (QRSP-400A w/ ABWMKKIT)
UVW-100B (QRSP-200A w/ ABWMKKIT)
DXC-D30/PVV-3* (QRSP-200A w/ ABWMKKIT)
DXC-D35/PVV-3 (QRSP-200A w/ ABWMKKIT)
BVV-5 (QRSP-200A w/ ABWMKKIT)
(*discontinued models)
Fig. 5
WRR-855A shown inserted in
BTA-801A adapter mounted to
BVW-D600 or BVW-600WS
(fitted with a BKW-L601 and
supplied A-8278-057-A
bracket). Battery is BPL-90.
Power via camcorder 4 pin DC
connector. (Supplied w/BTA-
801). Audio connection is via
user supplied 12” XLR-XLR
cable.
Fig. 6
WRR-810A shown
mounted to BVW-600WS
with A-8278-057-A
bracket. Battery is BPL-
60. Power via WRR-810A
internal “AA” batteries.
Audio is via XLR
connector to camcorder
audio input (user
supplied).
WRR-805A shown mounted to
BVW-600WS with supplied case
on A-8278-057-A bracket and
Power via WRR-805A internal
optional K-1334 XLR connector
Fig. 7
optional X-0248-167-1 plate
adapter. Battery is BPL-60.
“AA” batteries. Audio is via
to camcorder audio input.
-6-
Loading...