Sony CAM-90 Installation Manual
3
Digital Day&Night Color Camera
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
Do NOT use power sources other than that specified.
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
4
Digital Day&Night Color Camera
5
Digital Day&Night Color Camera
Features
Warning
Horizontal Resolution 540 TV
Lines
Clear image quality has been achieved by
employing a SONY CCD with 410,000
(effective) pixels, which provides a
horizontal resolution of 540 TV lines.
DAY & NIGHT
This camera has a function that automatically selects the mode that is
appropriate for daytime or night-time
conditions. The COLOR mode operates in
daytime conditions to provide optimum
colors, and BW mode operates in nighttime conditions to enhance the definition
of the image.
Electronic IRIS
The electronic IRIS function enables
continuous automatic control of the
shutter between 1/60~1/120,000 seconds.
PRIVACY Function
The PRIVACY function conceals the
areas you do not wish to appear on
the screen.
VIDEO/DC Drive Lens
The video drive lens and the DC drive lens
can be selected by the touch of a switch.
High Sensitivity
The built-in high sensitivity SONY COLOR
CCD enables a clear image even in
0.3Lux(0.1Lux B/W) or as low as 0.002Lux
with SENS-UP.
DNR (Digital Noise Reduction)
The amount of low illuminance noise
has been significantly reduced, and the
signal-to-noise ratio (S/N ratio) as well as
horizontal resolution have been improved,
resulting in a clear and sharp image
display even in the dark.
Controlled by OSD Menu
The camera can be controlled by
selecting text displayed on the monitor
screen.
Additional Functions
SENS-UP, MOTION DETECTION,
MIRROR, SHARPNESS and SYNC
(INT/LL) functions are also available.
The camera needs periodic inspection.
Contact an authorized technician for inspection.
Stop using your camera when you find a malfunction.
If you use your camera around smoke or unusual heat for a long time,
fire may be caused.
Do not Install the camera on a surface that can not support it.
Unless the surface is suitable, it could cause falling or other hazards.
Do not hold plug with wet hands.
It could cause an electric shock.
Do not disassemble the camera.
It may result in fire, electric shock or other hazards.
Do not use the camera close to a gas or oil leak.
It may result in fire or other hazards.
6
Digital Day&Night Color Camera
7
Digital Day&Night Color Camera
Contents
Features
Warnings and precautions
Names and functions of parts
Installation
Front
Bottom
Back
4
5
11
14
11
12
13
Lens
Using auto iris
Using C/CS mount lens
Connecting to a monitor
Connecting to power
14
17
17
Components
10
Camera operation
Troubleshooting
Menu
Settings
• LENS (selection)
• SHUTTER (condition and speed control)
• WHITE BALANCE control
• BACKLIGHT (Backlight Compensation)
• AGC (Auto gain compensation)
• DNR (Digital Noise Reduction)
• SENS-UP
• SPECIAL
• EXIT
18
34
18
19
20
22
23
24
25
26
26
28
33
Specifications
36
Warranty
37
9
Digital Day&Night Color Camera
8
Digital Day&Night Color Camera
Precautions
Only use the camera under conditions
where temperatures are between
-10°C and +50°C. Be especially
careful to provide ventilation when
operating under high temperatures.
It can cause the image quality to be
poor.
Severe lighting change or flicker can
cause the camera to work improperly.
It is one of the most important parts of
the camera. Be careful not to be
stained by fingerprint.
It can cause malfunctions to occur.
If it gets wet, wipe it dry immediately.
Liquids can contain minerals that
corrode the electronic components.
If it is exposed to radioactivity,
For heated CCD, it will be out of
order.
It can damage the CCD.
Do not install the camera in
extreme temperature conditions.
Do not install or use the camera in an
environment where the humidity is high.
Do not install the camera under
unstable lighting conditions.
Do not touch the front lens of the
camera.
Do not expose the camera to rain
or spill beverage on it.
Do not expose the camera to
radioactivity.
Never keep the camera face to
strong light directly.
Do not drop the camera or subject
it to physical shocks.
Note
• If the camera is exposed to spotlight or object reflecting strong light,
smear or blooming may occur.
• Please check that the power satisfies the normal specification before
connecting the camera.
11
Digital Day&Night Color Camera
Names and Functions of Parts
10
Digital Day&Night Color Camera
Components
1. COLOR DOME CAMERA
2.
Auto iris lens connection plug
3. L-Wrench
3. C-Mount adaptor
4. Instruction manual
Front
Lens protection cap
Please cover the lens when not using it.
CS-Mount lens adaptor
Please attach the CS-Mount lens here.
Back Focus clamp screw
Please loosen the clamp screw with a screwdriver before adjusting
the Back Focal length.
13
Digital Day&Night Color Camera
Names and Functions of Parts
12
Digital Day&Night Color Camera
Names and Functions of Parts
(u
Bottom Back
Mounting bracket screw hole
Please use the screw hole when fixing the
camera onto the mounting bracket. Please use
the clamp screw as specified picture.
Auto iris lens connector
This is the connection terminal for the auto iris lens.
Auto iris lens selection switch
Please change the mode to DC or VIDEO depending on the type of
auto iris lens being used.
Video output terminal
Sends video signals and connects to the video input terminal of the
monitor.
Power lamp
Lights up when the correct power is supplied to the camera.
Setting button
SETUP button
: Used for the menu display. This button can be used
to confirm settings after changing the value of the selected function or
current conditions.
UP & DOWN buttons :
Used for selecting items by moving the
cursor up or down on the menu screen.
LEFT & RIGHT buttons :
Used when changing item values, by
moving the cursor to the left or right on the menu screen.
Power input terminal
SETUP button :
Connects to the power appropriate to each power requirement.
L
Loading...