Sony C6902, C6903, C6906, C6943, L39h Service Manual

1278-1384 Rev 5

Sony Mobile Communications AB – Company Internal

Go/No Go Test

C6902/ C6903/ C6906/ C6943/ L39h

Xperia

TM

Z1



Sony Mobile Communications AB – Company Internal

2(8)

Test and Calibration Repair Instruction

CONTENTS

1 Go/No Go Testing ........................................................................... 3

1.1 Antenna Coupler C6902, C6903, C6906, C6943 and L39h no LTE .... 3

1.2 Antenna Coupler C6903 C6906 all bands ........................................... 3

1.3 Attenuation Factors ............................................................................. 5

1.3.1 Loss Values – Antenna Coupler CMU-Z11 ................................................ 5

1.3.2 Loss Values – Antenna Coupler CMW-Z11 ................................................ 6

2 Revision History ............................................................................. 8

C6902 and L39h no LTE is ONLY implemented in SERPII.
C6903, C6906 and C6943 no LTE is implemented in SERPII.
C6903 and C6906 all bands is ONLY implemented in CMWrun

1278-1384 Rev 5



Sony Mobile Communications AB – Company Internal

3(8)

1.1 Antenna Coupler C6902, C6903,

A FEDB C G H I NMLJ K O P Q R

25

15

16

17

18

19

20

21

22

23

24

14

4

5

6

7

8

9

10

11

12

13

1

2

3

A FEDB C G H I NMLJ K O P Q R

25

15

16

17

18

19

20

21

22

23

24

14

4

5

6

7

8

9

10

11

12

13

1

2

3

1.2 Antenna Coupler C6903

Test and Calibration Repair Instruction

1 Go/No Go Testing

This Go/No Go testing has to be carried out with an:

• Antenna Coupler.

For more information on Antenna Coupler and Cable in shield box testing, refer to
1220-1336: Generic Repair Manual – electrical, section ‘Setup Go/NoGo Test’!

For part no’s on the equipment below, refer to the ‘Tools Catalogue/Matrix’!

C6906, C6943 and L39h no LTE

The following equipment has to be used:

• Rohde & Schwartz RF Shield Package

- Rohde & Schwartz RF Shield Box CMU-Z11

- Rohde & Schwartz RF Coupler

- Grid Positioning Holder

• RF Test Cable Flexible 1M

• RF Adapter for RF Shield Box

• Micro USIM Card, instrument specific

GSM-850/900/1800/1900
WCDMA-850/900/1700/1900/2100

Put the grid positioning holder with its reference point in
position F11 and place the phone as shown in the adjacent
picture.

C6906 all bands

The following equipment has to be used:

• Rohde & Schwartz RF Shield Package

- Rohde & Schwartz RF Shield Box

- Rohde & Schwartz RF Coupler CMW-Z11

- Grid Positioning Holder

• RF Test Cable Flexible 1M

• RF Adapter for RF Shield Box

• Micro USIM Card, instrument specific

GSM-850/900/1800/1900
WCDMA-850/900/1700/1900/2100
LTE-Band 1/2/3/4/5/7/8/17/20
Put the grid positioning holder with its reference point in

position i13 and place the phone as shown in the adjacent
picture.

1278-1384 Rev 5

