Sony Bravia KDL-52W4500, Bravia KDL-40W4500, Bravia KDL-46W4500 Operating Instructions Manual
LCD Digital Colour TV
Operating Instructions
使用说明书
KDL-52W4500
KDL-46W4500
KDL-40W4500
© 2008 Sony Corporation 4-106-870-11(1)
GB
CS
Introduction
Thank you for choosing this Sony product.
Before operating the TV, please read this
manual thoroughly and retain it for future
reference.
Trademark information
is a registered trademark of the DVB
Project
DLNA and DLNA CERTIFIED are
trademarks and/or service marks o f Digital
Living Network Alliance.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
HDMI, the HDMI logo and HighDefinition Multimedia Interface are
trademarks or registered trademarks of
HDMI Licensing LLC.
“BRAVIA” and are
trademarks of Sony Corporation.
“XMB” and “xross media bar” are
trademarks of Sony Corporation and Sony
Computer Entertainment Inc.
GB
2
Table of Contents
Start-up Guide 4
Safety Information ............................................................................................................................9
Precautions .....................................................................................................................................10
Remote Control and TV Controls/Indicators ................................................................................11
Watching TV
Watching TV ....................................................................................................................................15
Using the Digital Electronic Programme Guide (EPG) .......................................................17
Using the Digital Favourite List ............................................................................................18
Using Optional Equipment
Connecting Optional Equipment ...................................................................................................19
Viewing Pictures from Connected Equipment .............................................................................22
Playing back Photo/Music via USB ...............................................................................................23
Using BRAVIA Sync (Control for HDMI)........................................................................................25
Using Home Network Features
Connecting to the Network ............................................................................................................27
Enjoying Photo/Music Files via the Network................................................................................27
Checking the Network Connection................................................................................................29
Adjusting the Server Display Settings..........................................................................................29
Using MENU Functions
Navigating through TV Home Menu on XMB™ ............................................................................31
TV Settings Menu............................................................................................................................32
Additional Information
Installing the Accessories (Wall-Mount Bracket).........................................................................43
Specifications..................................................................................................................................46
Troubleshooting..............................................................................................................................48
: for digital channels only
Before operating the TV, please read “Safety Information” (page 9). Retain this manual for future reference.
GB
3
GB
Start-up Guide
1: Checking the accessories
AC power cord (1)
Stand (1) and screws (4) (KDL-46W4500/40W4500
only)
Remote RM-GD004 (1)
Size AA batteries (R6 type) (2)
To insert batteries into the remote
Push and lift the cover to open.
~
• Observe the correct polarity when inserting
batteries.
• Do not use different types of batteries together or
mix old and new batteries.
• Dispose of batteries in an environmentally
friendly way. Certain regions may regulate the
disposal of batteries. Please consult your local
authority.
• Handle the remote with care. Do not drop or step
on it, or spill liquid of any kind onto it.
• Do not place the remote in a location near a heat
source, a place subject to direct sunlight, or a
damp room.
2: Attaching the stand (for
KDL-46W4500/40W4500)
1 Place the TV onto the stand by aligning
the screw hole alignment lines over the
stand as shown.
2 Fix the TV to the stand according to the
arrow marks that guide the screw holes
using the supplied screws.
~
• This TV is very heavy, so two or more people
should place the TV on the stand.
• If using an electric screwdriver, set the tightening
torque at approximately 1.5N·m (15kgf·cm).
• When installing the TV onto the wall, follow step
1 to prevent the TV panel from falling over.
GB
4
3: Connecting an antenna/
cable/VCR
Connecting an antenna/cable
Antenna cable (not
supplied)
Connecting an antenna/cable and VCR
Antenna
cable (not
supplied)
S-Video
cable (not
supplied)
4: Preventing the TV from
toppling over
Start-up Guide
1 Install a wood screw (4 mm in diameter,
not supplied) in the TV stand.
2 Install a machine screw (M6 × 12, not
supplied) into the screw hole of the TV.
3 Tie the wood screw and the machine
screw with a strong cord (not supplied).
AV cable
(not
supplied)
VCR
Antenna cable
(not supplied)
GB
5
5: Bundling the cables
6: Performing the initial
set-up
3
~
• Do not bundle the AC power cord together with
other cables.
4
Select “Home” for the best TV settings to
use the TV in the home.
5
Make sure that the antenna is connected.
The TV starts searching for all available
digital channels, followed by all available
analogue channels. This may take some
time, so do not press any buttons on the
TV or remote while proceeding.
GB
6
6
Adjusting the viewing angle
of the TV
This TV can be adjusted within the angles
shown below.
Start-up Guide
If you want to change the order of
analogue channels, follow the steps in
“Programme Sorting” on page 39.
If your TV cannot receive digital
broadcasts, the “Clock Set” menu appears
on the screen (page 36).
7
8
When using the control for HDMI
function, select “Yes” to enable control for
compatible HDMI devices.
9
Adjust the angle left and right (swivel)
Top view
Front
Select “Yes” to display this menu again
next time, otherwise select “No”.
GB
7
Detaching the Table-Top
Stand from the TV
~
• Remove the screws guided by the arrow marks
of the TV.
• Do not remove the Table-Top Stand for any reason
other than listed below.
– To wall-mount the TV.
– To put the TV in the carton at time of purchase
(KDL-46W4500/KDL-40W4500 only).
GB
8
Safety
Information
Installation/Set-up
Install and use the TV set in accordance with the instructions below
in order to avoid any risk of fire, electrical shock or damage and/or
injuries.
Installation
s The TV set should be installed near an easily accessible AC
power outlet.
s Place the TV set on a stable, level surface to avoid it from
falling down and cause personal injury or damage to the TV.
s Only qualified service personnel should carry out wall
installations.
s For safety reasons, it is strongly recommended that you use
Sony accessories, including:
– Wall-mount bracket SU-WL500
– Wall-mount bracket SU-WL50B
s Be sure to use the screws supplied with the Wall-mount bracket
when attaching the mounting hooks to the TV set. The supplied
screws are designed so that they are 8 mm to 12 mm in length
when measured from the attaching surface of the mounting
hook.
The diameter and length of the screws differ depending on the
Wall-mount bracket model.
Use of screws other than those supplied may result in internal
damage to the TV set or cause it to fall, etc.
8 mm – 12 mm
Screw (supplied with the Wall-mount
bracket)
Mounting Hook
Hook attachment on rear of TV set
Ventilation
s Never cover the ventilation holes or insert anything in the
cabinet.
s Leave space around the TV set as shown below.
s It is strongly recommended that you use a Sony wall-mount
bracket in order to provide adequate air-circulation.
Installed on the wall
30 cm
10 cm
Leave at least this space around the set.
10 cm
10 cm
Installed with stand
30 cm
10 cm 10 cm
Leave at least this space around the set.
s To ensure proper ventilation and prevent the collection of dirt
or dust:
– Do not lay the TV set flat, install upside down, backwards,
or sideways.
– Do not place the TV set on a shelf, rug, bed or in a closet.
– Do not cover the TV set with a cloth, such as curtains, or
items such as newspapers, etc.
– Do not install the TV set as shown below.
Air circulation is blocked.
6 cm
Transporting
s Before transporting the TV set,
disconnect all cables.
s Two or three people are needed
to transport a large TV set.
s When transporting the TV set
by hand, hold it as shown on
the right. Do not put stress on
the LCD panel and the frame
around the screen.
s When lifting or moving the TV
set, hold it firmly from the
bottom.
s When transporting the TV set,
do not subject it to jolts or
excessive vibration.
s When transporting the TV set
for repairs or when moving,
pack it using the original
carton and packing material.
Be sure to hold the
bottom of the panel,
not the front part.
Wall Wall
AC power cord
Handle the AC power cord and outlet as follows in order to avoid
any risk of fire, electrical shock or damage and/or injuries:
– Use only Sony supplied AC power cords, not those of other
brands.
– Insert the plug fully into the AC power outlet.
– Operate the TV set on a 220 – 240 V AC supply only.
– When wiring cables, be sure to unplug the AC power cord for
your safety and take care not to catch your feet on the cables.
– Disconnect the AC power cord from the AC power outlet before
working on or moving the TV set.
– Keep the AC power cord away from heat sources.
– Unplug the AC power plug and clean it regularly. If the plug is
covered with dust and it picks up moisture, its insulation may
deteriorate, which could result in a fire.
(Continued)
GB
9
Notes
s Do not use the supplied AC power cord on any other equipment.
s Do not pinch, bend, or twist the AC power cord excessively.
The core conductors may be exposed or broken.
s Do not modify the AC power cord.
s Do not put anything heavy on the AC power cord.
s Do not pull on the AC power cord itself when dis connecting the
AC power cord.
s Do not connect too many appliances to the same AC power
outlet.
s Do not use a poor fitting AC power outlet.
Prohibited Usage
Do not install/use the TV set in locations, environments or
situations such as those listed below, or t he TV set may malfunction
and cause a fire, electrical shock, damage and/or injuries.
Location:
Outdoors (in direct sunlight), at the seashore, on a ship or other
vessel, inside a vehicle, in medical institutions, unstable locations,
near water, rain, moisture or smoke.
Environment:
Places that are hot, humid, or excessively dusty; where insects may
enter; where it might be exposed to mechanical vibration, near
flammable objects (candles, etc). The TV set shall not be exposed
to dripping or splashing and no objects filled with liquids, such as
vases, shall be placed on the TV.
Situation:
Do not use when your hands are wet, with the cabinet removed, or
with attachments not recommended by the manufacturer.
Disconnect the TV set from AC power outlet and antenna during
lightning storms.
Broken pieces:
s Do not throw anything at the TV set. The screen glass may
break by the impact and cause serious injury.
s If the surface of the TV set cracks, do not touch it until you have
unplugged the AC power cord. Otherwise electric shock may
result.
When not in use
s If you will not be using the TV set for several days, the TV set
should be disconnected from the AC power for environmental
and safety reasons.
s As the TV set is not disconnected from the AC power when the
TV set is just turned off, pull the plug from the AC power outlet
to disconnect the TV set completely.
s However, some TV sets may have features that require the TV
set to be left in standby to work correctly.
For children
s Do not allow children to climb on the TV set.
s Keep small accessories out of the reach of children, so that they
are not mistakenly swallowed.
Precautions
Viewing the TV
s View the TV in moderate light, as viewing the TV in poor light
or during long period of time, strains your eyes.
s When using headphones, adjust the volume so as to avoid
excessive levels, as hearing damage may result.
LCD Screen
s Although the LCD screen is made with high-precision
technology and 99.99% or more of the pixels are effective,
black dots may appear or bright points of light (red, blue, or
green) may appear constantly on the LCD screen. This is a
structural property of the LCD screen and is not a malfunction.
s Do not push or scratch the front filter, or place objects on top of
this TV set. The image may be uneven or the LCD screen may
be damaged.
s If this TV set is used in a cold place, a smear may occur in the
picture or the picture may become dark. This does not indicate
a failure. These phenomena disappear as the temperature rises.
s Ghosting may occur when still pictures are displayed
continuously. It may disappear after a few moments.
s The screen and cabinet get warm when this TV set is in use.
This is not a malfunction.
s The LCD screen contains a small amount of liquid crystal.
Mercury is sometimes contained depending on the kind of
fluorescent tubes. Follow your local ordinances and regulations
for disposal.
Handling and cleaning the screen surface/
cabinet of the TV set
Be sure to unplug the AC power cord connected to the TV set from
AC power outlet before cleaning.
To avoid material degradation or screen coating degradation,
observe the following precautions.
s To remove dust from the screen surface/cabinet, wipe gently
with a soft cloth. If dust is persistent, wipe with a soft cloth
slightly moistened with a diluted mild detergent solution.
s Never use any type of abrasive pad, alkaline/acid cleaner,
scouring powder, or volatile solvent, such as alcohol, benzene,
thinner or insecticide. Using such materials or maintaining
prolonged contact with rubber or vinyl materials may result in
damage to the screen surface and cabinet material.
s Periodic vacuuming of the ventilation openings is
recommended to ensure to proper ventilation.
s When adjusting the angle of the TV set, move it slowly so as to
prevent the TV set from moving or slipping off from its table
stand.
Optional Equipment
Keep optional components or any equipment emitting
electromagnetic radiation away from the TV set. Otherwise picture
distortion and/or noisy sound may occur.
If the following problems occur...
Turn off the TV set and unplug the AC power cord immediately if
any of the following problems occur.
Ask your dealer or Sony service centre to have it checked by
qualified service personnel.
When:
– AC power cord is damaged.
– Poor fitting of AC power outlet.
– TV set is damaged by being dropped, hit or having something
thrown at it.
– Any liquid or solid object falls through openings in the cabinet.
GB
10
Remote Control and TV Controls/Indicators
Remote control and TV controls
*
*
Buttons on the TV will work the same as those on the remote
control.
*In TV menu, these buttons will work as F/f/G/g/.
z
•The number 5, N, PROG + and AUDIO buttons have a tactile dot.
Use the tactile dots as a reference when operating the TV.
*
Button Description
1 "/1
— TV
standby
2 1
— Power
3 — Picture
freeze
Press to turn the TV on and off from standby
mode.
Press to turn the TV on or off.
~
• To disconnect the TV completely, turn off the
TV, then unplug the AC power cord from the
AC power.
Press to freeze the TV picture. The frozen picture
is displayed in full size, and a moving picture is
displayed in the small screen.
To remove the small screen, press once. To return
to single picture mode, press again.
~
• This function is not available for a PC input
source.
4 AUDIO In analogue mode: Press to change the dual sound
mode (page 34).
In digital mode: Press to change the language to
be used for the programme currently being
viewed (page 41).
(Continued)
11
GB
5
— Wide
Mode
6 BRAVIA
Sync
Press to change the Wide Mode (page 16).
m/N/X/M/x: You can operate the
BRAVIA Sync-compatible equipment or
DIGITAL MEDIA PORT-compatible equipment
that is connected to the TV.
SYNC MENU: Displays the menu of connected
HDMI equipment. While viewing other input
screens or TV programmes, “HDMI Device
Selection” is displayed when the button is
pressed.
THEATRE: You can set Theatre Mode on or off.
When Theatre Mode is set to on, the optimum
audio output (if the TV is connected with an
audio system using an HDMI cable) and picture
quality for film-based contents are automatically
set.
z
• If you turn the TV off, Theatre Mode is also
turned off.
~
• Control for HDMI (BRAVIA Sync) is only
available with the connected Sony equipment
that has the BRAVIA Sync logo or is
compatible with control for HDMI.
7 /
— Input
select/Text
hold
F/f/G/g/ Press F/f/G/g to move the on-screen cursor.
8
9 OPTIONS Enables you to access various viewing options
0 HOME Press to display the TV Home menu (page 31).
qa Coloured
buttons
qs Number
buttons
qd
— Favourite
In TV mode: Press to display a list of equipment
connected to the TV (page 22).
In Text mode: Press to hold the current page.
Press to select/confirm the highlighted item.
When playing a photo file: Press to pause/start
a slideshow. Press F/G to select the previous file.
Press f/g to select the next file.
When playing a music file: Press to pause/
start the playback. Press and hold G/g to fast
forward/fast reverse, then release the button at the
point where you want to resume playback. Press
F to start playback from the beginning of the
current file. Press f to go to the next file.
and change/make adjustments according to the
source and wide mode.
When the coloured buttons are available, an
operation guide appears on the screen. Follow the
operation guide to perform a selected operation.
In TV mode: Press to select channels. For
channel numbers 10 and above, press the next
digit quickly.
In Text mode: Press to enter a page number.
Press to display the Digital Favourite List that
you have specified (page 18).
12
GB
qf
— Previous
channel
qg % — Mute Press to mute the sound. Press again to restore the
qh 2 +/–
— Volume
qj PROG +/–//In TV mode: Press to select the next (+) or
qk /
— Text
ql RETURN Press to return to the previous screen of the
w; GUIDE /
— EPG
wa DIGITAL/
ANALOG
ws
— Twin
Picture/PIP
wd /
— Info/Text
reveal
Press to return to the channel that was last viewed
(for more than five seconds).
sound.
z
• In standby mode, if you want to turn on the TV
without sound, press this button.
Press to adjust the volume.
previous (–) channel.
In Text mode: Press to select the next ( ) or
previous ( ) page.
Press to display text information (page 15).
displayed menu.
When playing a photo/music file: Press to stop
the playback. (The display returns to the file or
folder list.)
Press to display the Digital Electronic
Programme Guide (EPG) (page 17).
Switches between digital and analogue modes.
Displays two pictures simultaneously (page 22,
23).
In digital mode: Displays details of the current
and next programme one by one.
In analogue mode: Displays information. Press
once to display the current channel number and
screen mode. Press again to display clock
information. Press a third time to remove the
display from the screen.
In Text mode (page 15): Reveals hidden
information (e.g. answers to a quiz).
(Continued)
13
GB
Indicators
Indicator Description
1 Light sensor Do not put anything over the sensor, as its function may be affected (page 34).
2 — Picture
Off/Timer
3 1 — Standby Lights up in red when the TV is in standby mode.
4 " — Power Lights up in green when the TV is on.
5 Remote control
sensor
Lights up in green when you select “Picture Off” (page 34).
Lights up in orange when you set the timer (page 17, 36).
Receives IR signals from the remote.
Do not put anything over the sensor. The sensor may not operate properly.
~
• Make sure that the TV is completely turned off before unplugging the AC power cord. Unplugging the AC
power cord while the TV is turned on may cause the indicator to remain lit or may cause the TV to
malfunction.
About the operation guide on the TV screen
Operation Guide
Example: Press or RETURN (see 8 on page 12 or ql on page 13).
The operation guide provides help on how to operate the TV using the remote, and is displayed at
the bottom of the screen. Use the remote buttons shown on the operation guide.
GB
14
Watching TV
Watching TV
1
BRAVIA Sync
SYNC MENU
2
GUIDE
RETURN
1 Press 1 on the TV to turn on the TV.
When the TV is in standby mode (the 1
(standby) indicator on the TV front panel
is red), press "/1 on the remote to turn on
the TV.
2 Press DIGITAL/ANALOG to switch
between digital and analogue modes.
The available channels vary depending on
the mode.
THEATRE
AUDIO
3
3
3 Press the number buttons or PROG +/– to
select a TV channel.
To select channel numbers 10 and above
using the number buttons, enter the next
digit quickly.
To select a digital programme using the
Digital Electronic Programme Guide
(EPG), see page 17.
In digital mode, an information banner
appears briefly. Each time you press
/ , the banner changes cyclically as
follows:
Current programme information t Next
programme information t No banner
The following icons may be indicated on
the banner.
: Radio service
: Scrambled/Subscription service
: Subtitles available
: Subtitles available for the hearing
impaired
: Multiple audio languages available
: Recommended minimum age for
current programme (ages from 4 to
18)
: Parental Lock
To access Text
Press /. Each time you press /, the display
changes cyclically as follows:
Tex t t Text over the TV picture (mix mode)
t No Text (exit the Text service)
To select a page, press the number buttons or
/.
To hold a page, press
To reveal hidden information, press
z
• When four coloured items appear at the bottom of
the Text page, you can access pages quickly and
easily (Fast Text). Press the corresponding
coloured button to access the page.
/ .
/ .
~
• Text language displays can be either English,
Persian or French depending on your broadcast
signal.
Watching TV
(Continued)
15
GB
To change the Wide Mode manually
Press repeatedly to select the desired Wide
Mode.
Wide Zoom*
Enlarges the centre
portion of the picture. The
left and right edges of the
picture are stretched to fill
the 16:9 screen.
Normal
Displays the 4:3 picture in
its original size. Side bars
are shown to fill the 16:9
screen.
Full
Stretches the 4:3 picture
horizontally, to fill the
16:9 screen.
Zoom*
Displays the cinemasc opic
(letter box format) picture
in the correct proportion.
Option Description
Surround See page 33.
Intelligent Picture (in
analogue mode only)
MPEG Noise
Reduction
Speaker See page 38.
Motionflow See page 35.
Subtitle Setting (in
digital mode only)
Sleep Timer See page 36.
Power Saving See page 34.
System Information
(in digital mode only)
See page 39.
See page 33.
See page 41.
See page 42.
* Parts of the top and bottom of the picture may be cut off.
You can adjust the vertical position of the picture. Press
F/f to move the picture up or down (e.g. to read
subtitles).
~
• When you select “Wide Zoom”, some characters
and/or letters at the top and the bottom of the
picture may not be visible. In such a case, adjust
“Vertical Size” in the “Screen Settings” menu
(page 37).
z
• When “Auto Wide” (page 36) is set to “On”, the
TV automatically selects the best mode to suit the
input from an external equipment.
• If 720p, 1080i or 1080p source pictures are
displayed with black borders on the screen edges,
select “Wide Zoom” or “Zoom” to adjust the
pictures.
Using the Options menu
Press OPTIONS to display the following
options when viewing a TV programme.
Option Description
Picture Mode See page 32.
Sound Mode See page 33.
16
GB
Using the Digital Electronic Programme Guide (EPG) *
1 In digital mode, press GUIDE.
2 Perform the desired operation as shown in
the following table or displayed on the
screen.
* This function may not be available in some regions.
Digital Electronic Programme Guide (EPG)
To Do this
View a programme Press F/f/G/g to select a programme, then press .
Turn off the EPG Press GUIDE.
Sort programme information by
category
– Category list
Set a programme to be displayed
automatically on the screen when it
starts
– Reminder
1 Press the blue button.
2 Press F/f to select a category, then press .
1 Press F/f/G/g to select a future programme you want to display,
then press / .
2 Press F/f to select “Reminder”, then press .
A c symbol appears next to the programme’s information. The
indicator on the TV front panel lights up in orange.
~
• If you switch the TV to standby mode, the TV will automatically
turn on when the programme starts.
Cancel a reminder – Timer list
1 Press / .
2 Press F/f to select “Timer list”, then press .
3 Press F/f to select the programme you want to cancel, then
press .
4 Press to select “Cancel Timer”.
A display appears to confirm that you want to cancel the
programme.
5 Press G/g to select “Yes”, then press .
Watching TV
17
GB
Using the Digital Favourite List *
You can specify up to four of your favourite
channel lists.
1 In digital mode, press .
2 Perform the desired operation as shown in
the following table or displayed on the
screen.
Digital Favourite List
To Do this
Create a Favourite list for the first
time
1 Press the yellow button to select the Favourite list.
2 Press F/f/G/g to select the channel you want to add, then press
.
A symbol appears next to channels that you have stored in
the Favourite list.
* This function may not be available in some regions.
Watch a channel
1 Press the yellow button to select a Favourite list.
2 Press F/f to select a channel, then press .
Turn off the Favourite list Press RETURN.
Add or remove channels in a
Favourite list
1 Press the blue button.
2 Press the yellow button to select the Favourite list to edit.
3 Press F/f to select the channel to add or remove, then press .
Remove all channels from a Favourite
list
1 Press the blue button.
2 Press the yellow button to select the Favourite list to edit.
3 Press the blue button.
4 Press G/g to select “Yes”, then press .
18
GB
Using Optional Equipment
Connecting Optional Equipment
You can connect a wide range of optional equipment to your TV.
For service use only
Digital still camera
Camcorder
USB storage media
Camcorder
Headphones
Audio system
DVD player
PC (HDMI-output)
Blu-ray disc player
Camcorder
Broadband
router
PC
Using Optional Equipment
Video game
equipment
DVD player
VCR
DVD player with
component output
DVD recorder
VCR
DIGITAL MEDIA
PORT adaptor
Hi-Fi audio
equipment
Home theatre system
with digital input
(Continued)
19
GB
Connect to Input symbol on
screen
1 USB You can enjoy photo/music files stored in a Sony digital still
2 HDMI IN 2
HDMI IN 1 or 3
HDMI 2
HDMI 1 or
HDMI 3
Description
camera or camcorder through a USB cable or USB storage
device on your TV (page 23).
The digital video and audio signals are input from the
equipment.
In addition, when you connect the equipment that is
compatible with control for HDMI, communication with the
connected equipment is supported. Refer to page 38 to set up
this communication.
If the equipment has a DVI jack, connect the DVI jack to the
HDMI IN 3 jack through a DVI-HDMI adaptor interface (not
supplied), and connect the equipment’s audio out jack to the
audio in jack in the HDMI IN 3 jacks.
~
• The HDMI jacks only support the following video inputs:
480i, 480p, 576i, 576p, 720p, 1080i, 1080p and 1080/24p.
• Be sure to use only an authorised HDMI cable bearing the
HDMI logo. We recommend that you use a Sony HDMI
cable (high speed type).
• When connecting an audio system with HDMI jack, be sure
to also connect to the audio output jacks to listen to the
sound from the TV on audio system.
3 2, and 2 Video 2 If you connect mono equipment, connect to the 2 L jack.
4 iHeadphones You can listen to sound from the TV on headphones.
5 1 or 1 or
3, and 1 or 3
6 / Use to record the analogue video and sound from TV to a
Video 1 or
Video 3
To avoid picture noise, do not connect the camcorder to the
video jack 1 and the S video jack 1 at the same time.
If you connect mono equipment, connect to the L(MONO)
jack 1 or 3.
DVD recorder or VCR. To turn off the sound of the TV
speakers, set “Speaker” to “Audio System” (page 38). If you
connect mono equipment, connect to the L jack .
~
• The monitor output jacks cannot support HD/DVD, HDMI
and PC signals source pictures, also digital audio signal for
sound.
7 / 1 or 2 HD/DVD 1 or
HD/DVD 2
8 DMPORT DMPORT You can play audio or video (optional cable required) of a
For better picture quality, component connection is
recommended if your DVD player has a component video
output.
portable audio player that is connected to the TV using a
DIGITAL MEDIA PORT (DMPORT) adaptor.
Depending on the connected DIGITAL MEDIA PORT
adaptor, you can operate the connected equipment using the
TV as follows;
– Using the remote of the TV: F/f/G/g, , RETURN, N/
x/X/m/M.
– Using the Options menu function: Press OPTIONS, and select
“Control Panel” or “Device Control (Menu)”.
~
• Do not connect or disconnect a DIGITAL MEDIA PORT
adaptor while the TV is turned on.
• The connected equipment is not powered when the TV is
turned off or in standby mode.
GB
20
Connect to Input symbol on
screen
9 DIGITAL
Description
Use an optical audio cable (not supplied).
AUDIO OUT
(OPTICAL)
0 You can listen to the sound from the TV on Hi-Fi audio
equipment. To turn off the sound of the TV speakers, set
“Speaker” to “Audio System” (page 38).
qa PC IN
PC Use a PC cable (not supplied).
(RGB)/
qs You can enjoy contents stored in DLNA-compatible devices
via a network (page 27).
Using Optional Equipment
21
GB
Viewing Pictures from
Connected Equipment
Turn on the connected equipment, then press
/ to display a list of connected
equipment. Press F/f to select the desired
input source, then press .
The highlighted item is automatically selected
if you do not perform any operation for two
seconds after pressing F/f.
If you have set an input source to “Skip” in the
“Video Labels” menu (page 37), that input
source does not appear in the list.
Option Description
Control Panel (in
DIGITAL MEDIA
PORT mode only)
Device Control (in
HDMI mode only)
See page 20.
See page 25.
To view two pictures simultaneously
– Twin Picture
You can view two pictures (external input and
TV programme) on the screen simultaneously.
Connect an optional equipment (page 19), and
make sure that images from the equipment
appear on the screen (page 22).
For a USB device
See page 23.
For a Network device
See page 27.
z
• To return to normal TV mode, press DIGITAL/
ANALOG.
Using the Options menu
Press OPTIONS to display the following
options when viewing pictures from connected
equipment.
Option Description
Picture Mode (except
PC input mode)
Display Mode (in PC
input mode only)
Sound Mode See page 33.
Surround See page 33.
MPEG Noise
Reduction (except PC
input mode)
Speaker See page 38.
Motionflow See page 35.
Auto Adjustment (in
PC input mode only)
Horizontal Shift (in
PC input mode only)
Sleep Timer (except
PC input mode)
Power Saving See page 34.
Device Control
(Menu) (in DIGITAL
MEDIA PORT mode
only)
See page 32.
See page 32.
See page 33.
See page 37.
See page 37.
See page 36.
See page 20.
~
• This function is not available for a PC input or
DIGITAL MEDIA PORT input.
• You cannot change the size of the pictures.
• The analogue TV video in the TV programme
picture will not appear while displaying Video 1,
Video 2 or Video 3 in the external input picture.
1 Press .
2 Press the number buttons or PROG +/– to
select the TV channel.
To return to single picture mode
Press RETURN.
z
• The highlighted picture is audible. You can switch
the audible picture by pressing G/g.
22
GB
To view two pictures simultaneously
– PIP (Picture in Picture)
You can view two pictures (PC input and TV
programme) on the screen simultaneously.
Connect a PC (page 19), and make sure that
images from the PC appear on the screen.
~
• “Power Management” (page 37) is not available in
PIP mode.
1 Press .
The picture from the connected PC is
displayed in full size, and the TV
programme is displayed in the small
screen.
You can use F/f/G/g to change the
position of the TV programme screen.
2 Press the number buttons or PROG +/– to
select a TV channel.
To return to single picture mode
Press RETURN.
z
• You can switch the audible picture by selecting
“Audio Swap” from the Options menu.
Playing back Photo/Music
via USB
You can enjoy photo/music files stored in a
Sony digital still camera or camcorder through
a USB cable or USB storage device on your
TV.
1 Connect a supported USB device to the
TV.
2 Press HOME.
3 Press G/g to select “Photo” or “Music”.
4 Press F/f to select a USB device, then
press .
In “Music”, “List View” appears. In
“Photo”, “Thumbnail View” appears.
You can switch the view mode between
“List View” and “Thumbnail View” by
pressing the yellow button.
5 Press F/f/G/g to select a file or folder,
then press .
When you select a folder, select a file,
then press .
Playback starts.
Using Optional Equipment
Photo Playback Auto Start
The TV automatically starts photo playback
when the TV is turned on and a digital still
camera or other device storing photo files is
connected to the USB port and then turned on
(page 34).
(Photo) Available OPTIONS
Option Description
Picture Mode See page 32.
Sound Mode See page 33.
Surround See page 33.
Cropping Crops a photograph.
Show Options Allows you to set
Photo Set-up Sets how playback
repeat/shuffle for photo
playback.
should be performed
and what effects to use
during slideshows.
(Continued)
23
GB
Option Description
Rotate and Save Rotates and saves
Speaker See page 38.
Picture Frame
Image
Information Displays information
unprotected files.
Allows you to select a
photograph to be
displayed as a picture
Frame.
about the device,
folders, and files.
(Music) Available OPTIONS
Option Description
Sound Mode See page 33.
Surround See page 33.
Add to Slideshow Registers the
background music to be
played during a
slideshow using
(Photo).
Omit from
Slideshow
Playback Options Allows music options to
Speaker See page 38.
Information Displays information
Cancels the registered
background music.
be set for repeat,
shuffle, or regular
playback.
about the device,
folders, and files.
~
• Picture quality may appear coarse when using
(Photo) because images may be enlarged
depending on the file. Also, images may not fill
the entire screen depending on the image size and
aspect ratio.
• Some photo files may take some time to be
displayed when using (Photo).
• While the TV is accessing the data on the USB
device, observe the following:
– Do not turn off the TV or connected USB
device.
– Do not disconnect the USB cable.
– Do not remove the USB device.
The data on the USB device may be damaged.
• Sony will not be held liable for any damage to, or
loss of, data on the recording media due to a
malfunction of any connected devices or the TV.
• Playback does not start automatically if the TV is
turned on after connecting the digital still camera
or other device to the USB port.
• USB playback is supported for the following
photo file formats:
– JPEG (JPEG format files with the extension
“.jpg” and conforming to DCF 2.0 or Exif 2.21)
– RAW (ARW/ARW 2.0 format files with the
extension “.arw”. For preview only.)
• USB playback is supported for the following
music file formats:
– MP3 (files with the extension “.mp3” that have
not been copyrighted)
• When you connect a Sony digital still camera, set
the camera’s USB connection mode to Auto or
“Mass Storage”. For more information about USB
connection mode, refer to the instructions supplied
with your digital camera.
• USB Photo Viewer supports FAT12, FAT16 and
FAT32 file systems.
• Depending on the exact file specifications, some
files, including those modified on a PC, cannot be
played even if the file format is supported.
• The file name and folder name support only
English.
• Check the website below for updated information
about compatible USB devices.
http://www.sony-asia.com/bravia/flash.html
To display a photograph
— Picture Frame
You can display a photograph on the screen for
a selected period of time. After that period, the
TV automatically switches itself into standby
mode.
1 Select a photograph.
You can select a photograph from the
connected USB device or preset picture
folder. For details on selecting a
photograph, see page 23.
2 Press OPTIONS while the selected
photograph is displayed, then press F/f to
select “Picture Frame Image” and press
.
3 Press RETURN repeatedly to return to
the Home Menu.
4 Press F/f/G/g to select “Photo”, then
select “Picture Frame” and press .
The TV is switched to Picture Frame
mode, and the selected photograph is
displayed on the screen.
24
GB
To set the duration of displaying a
photograph
Press OPTIONS, then select “Duration”
and press . Then, select the duration,
and press .
The counter appears on the screen.
To return to the XMB™
Press RETURN.
~
• If the photograph is selected from a USB device, it
must remain connected to the TV.
• If “Sleep Timer” is activated, the TV
automatically will switch into standby mode.
Using BRAVIA Sync
(Control for HDMI)
The control for HDMI function enables the TV
to communicate with the connected equipment
that is compatible with the function, using
HDMI CEC (Consumer Electronics Control).
For example, by connecting Sony equipment
that is compatible with control for HDMI
(with HDMI cables), you can control them
together.
Be sure to connect the equipment correctly,
and make the necessary settings.
Control for HDMI
• Automatically turns the connected
equipment off when you switch the TV to
standby mode using the remote.
• Automatically turns the TV on and
switches the input to the connected
equipment when the equipment starts to
play.
• If you turn on a connected audio system
while the TV is on, the sound output
switches from the TV speaker to the audio
system.
• Adjusts the volume (2 +/–) and mutes the
sound (%) of a connected audio system.
• You can operate the connected Sony
equipment that has the BRAVIA Sync logo
by the TV remote by pressing:
– N/x/X/m/M to operate the connected
equipment directly.
– SYNC MENU to display the menu of the connected
HDMI equipment on the screen.
After displaying the menu, you can operate the
menu screen by using F/f/G/g and .
– OPTIONS to display “Device Control”, then select
options from “Menu”, “Options”, and “Content
List” to operate the equipment.
– Refer to the instruction manual of the equipment for
available control.
Using Optional Equipment
(Continued)
25
GB
To connect the equipment that is
compatible with control for HDMI
Connect the compatible equipment and the TV
with an HDMI cable. When connecting an
audio system, be sure to also connect the
DIGITAL AUDIO OUT (OPTICAL) jack of
the TV and the audio system using an optical
audio cable. For details, see page 19.
To make the control for HDMI settings
The control for HDMI settings must be set on
both the TV side and connected equipment
side. See “HDMI Set-up” on page 38 for the
TV side settings. For settings on the connected
equipment, refer to the operating instructions
for that equipment.
26
GB
Using Home Network Features
With this TV, you can enjoy contents stored in
DLNA-compatible devices on the home
network.
Devices that store and provide contents, such
as photo/music files, are called “server”. The
TV receives the photo/music files from the
server via the network, and you can enjoy
them on the TV even in other rooms.
To enjoy the home network, a DLNAcompatible device (VAIO, Cyber-shot, etc.) is
necessary as a server.
Connecting to the Network
TV
Network cable
(not supplied)
Enjoying Photo/Music Files
via the Network
You can enjoy photo/music files on the server
easily by selecting an icon on the Home Menu
of the TV.
1 Press HOME.
2 Press G/g to select “Photo” or “Music”.
3 Press F/f to select a server, then press .
In “Music”, “List View” appears. In
“Photo”, “Thumbnail View” appears.
You can switch the view mode between
“List View” and “Thumbnail View” by
pressing the yellow button.
When the server cannot be found
See “Checking the Network Connection”
(page 29) and “Adjusting the Server
Display Settings” (page 29).
4 Press F/f/G/g to select a file or folder,
then press .
When you select a folder, select a file,
then press .
Playback starts.
Using Home Network Features
Broadband router
To network devices
Network cable
(not supplied)
DSL modem/
Cable modem
Internet
~
• Depending on the network device, it may be
necessary to register the TV with the network
device.
• Picture quality may appear coarse when using
(Photo) because images may be enlarged
depending on the file. Also, images may not fill
the entire screen depending on the image size and
aspect ratio.
• Some photo files may take some time to be
displayed when using (Photo).
• The file name and folder name support only
English.
• To play files that are received from a network
device, they need to conform to one of the
following file formats.
– Still images: JPEG format
– Music: MP3 format or linear PCM format
Depending on the network device, the file format
may be converted before transfer. In such cases,
the file format resulting after conversion is used
for playback. For details, see the instruction
manual for the network device being used.
Even files conforming to one of the file formats
given above cannot be played in some cases.
(Continued)
27
GB
To enjoy photographs and music on the
TV screen by operating devices
– Renderer
Renderer is a feature for playing photo files
and music files stored in network devices
(digital still cameras, mobile phones, etc.) on
the TV by operating the controller device in
question. To use this feature, a renderercompatible device such as a digital still camera
or mobile phone is required as the controller.
Refer as well to the instruction manual
supplied with the controller.
1 Set “Renderer Function”, “Renderer
Access Control” and “Renderer Set-up” in
“Network Settings” if necessary
(page 42).
2 Play the file selected using the controller
on the TV.
The file is played on the TV over the
connected network.
Use the controller or TV’s remote to
perform operations during playback.
(Music) Available OPTIONS
Option Description
Sound Mode See page 33.
Surround See page 33.
Add to Slideshow Registers the background
music to be played during
a slideshow using
(Photo).
Omit from Slideshow Cancels the registered
background music.
Playback Options Allows music options to
be set for repeat, shuffle,
or regular playback.
Speaker See page 38.
Information Displays information
about the device, folder,
and files.
(Photo) Available OPTIONS
Option Description
Picture Mode See page 32.
Sound Mode See page 33.
Surround See page 33.
Cropping Crops a photograph.
Show Options Allows you to set repeat/
Photo Set-up Sets how playback should
Rotate Rotates files.
Speaker See page 38.
Information Displays information
shuffle for photo
playback.
be performed and what
effects to use during
slideshows.
about the device, folders,
and files.
28
GB
Checking the Network
Connection
Adjusting the Server
Display Settings
Enter the respective (alphanumeric) values for
your router. The items that need to be set may
differ, depending on the Internet service
provider or the router. For details, refer to the
instruction manuals that have been provided
by your Internet service provider or supplied
with the router.
1 Press HOME.
2 Press G to select “Settings”.
3 Press F/f to select “Network Settings”,
then press .
4 Select “Network”, then press .
5 Select “IP Address Settings”, then press
.
6 Select an item, and press .
When you select “DHCP”
Go to step 7.
When you select “Manual”
Set the following items using F/f/g and
the number buttons.
• IP Address
• Subnet Mask
• Default Gateway
7 Press .
8 Select “Test”, then press .
9 Select “Yes”, then press .
The network diagnostic starts.
When the message “Connection
successful.” appears, press RETURN
repeatedly to exit.
You can select home network servers to be
displayed on the Home Menu. Up to 10 servers
can be displayed on the Home Menu
automatically.
1 Set the server to allow connections from
the TV.
For details on settings on the server, refer
to the Operating Instructions supplied
with the server.
2 Press HOME.
3 Press G/g to select “Settings”.
4 Press F/f to select “Network Settings”,
then press .
5 Select “Server Display Settings”, then
press .
6 Select the server you want to display on
the Home Menu, then press .
7 Select “Yes”, then press .
To set the server not to be displayed on
the Home Menu
In step 7, press F/f to select “No”, then press
.
Available OPTIONS (on the connected
server settings display)
Option Description
Delete All Deletes all connected
servers.
Update List Updates the server list to
the latest information.
Using Home Network Features
Information Displays information
about the connected server
currently selected.
Delete Deletes the connected
server currently selected.
(Continued)
29
GB
Loading...