Sony Bravia KDL-60LX900, Bravia KDL-52LX900 Operating Instructions Manual
4-187-908-11(1)
LCD
Digital Colour TV
Operating Instructions
Setting Up
Watching TV
Additional Information
KDL-60LX900 / 52LX900
Introduction
Thank you for choosing this Sony product.
Before operating the TV, please read this
manual thoroughly and retain it for future
reference.
~
• The illustrations used in thi s manual may
differ depending on your TV model.
Trademark information
is a registered trademark of the DVB
Project
HDMI, the HDMI Logo, and HighDefinition Multimedia Interface are
trademarks or registered trademarks of
HDMI Licensing LLC in theUnited States
and other countries.
DLNA®, the DLNA Logo and DLNA
CERTIFIED® are trademarks, service
marks, or certification marks of the Digital
Living Network Alliance.
DivX® is a video file compression
technology, developed by DivX, Inc.
DivX, DivX Certified, and associated logos
are trademarks of DivX, Inc. and are used
under license.
ABOUT DIVX VIDEO: DivX® is a digital
video format created by DivX,Inc. This is
an official DivX Certified device that plays
DivX video. Visit www.divx.com for more
information and software tools to convert
your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified® device must be
registered in order to play DivX Video-onDemand (VOD) content. To generate the
registration code, locate the DivX VOD
section in the device setup menu. Go to
vod.divx.com with this code to complete
the registration process and learn more
about DivX VOD.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
“BRAVIA” and are trademarks
of Sony Corporation.
“XMB” and “xross media bar” are
trademarks of Sony Corporation and Sony
Computer Entertainment Inc.
“FACE DETECTION” logo is trademark
of Sony Corporation.
Notes for Australia and
New Zealand model
This product is ENERGY RATING
qualified in the “Home” mode. ENERGY
RATING is a program designed to promote
energy efficient products and practices.
• When the TV is initially set up, it is
designed to meet ENERGY RATING
requirements while maintaining
optimum picture quality.
• Changes to certain features, settings, and
functionalities of this TV (e. g. TV Guide,
Picture/Sound, Eco-Setting) can slightly
change the power consumption.
Depending upon such changed settings
(e.g. “Shop” mode), the power
consumption may vary which possibly
could exceed the stated energy rating.
To reset the TV to ENERGY RATING
qualified settings, select “Home” mode
from the initial set-up procedure in
“Factory Settings” under the “Set-up”
menu.
IMPORTANT
INFORMATION
If a television is not positioned in a
sufficiently stable location, it can be
potentially hazardous due to falling. Many
injuries, particularly to children, can be
avoided by taking simple precautions such
as:
• Using cabinets or stands recommended
by the manufacturer of the television.
• Only using furniture that can safely
support the television.
• Ensuring the television is not
overhanging the edge of the supporting
furniture.
• Not placing the television on tall
furniture (for example, cupboards or
bookcases) without anchoring both the
furniture and the television to a suitable
support.
• Not standing the televisions on cloth or
other materials placed between the
television and supporting furniture.
• Educating children about the dangers of
climbing on furniture to reach the
television or its controls.
Notice for customers in
the South Africa
The Euro/South Africa converter plug
should be fitted as follows.
1 Insert the power
supply or CEE7 plug
in to the converter
plug.
2 Use an appropriate
screwdriver to attach
the screw tightly
without damaging
the screw head.
3 TEST: Grip the
converter plug, and
pull the VDE cord
set/transformer to
ensure it is fully
secure, if not then increase the torque
setting and further tighten.
Re-test.
The converter plug is now ready for
use.
Notice for customers in
Thailand
This telecommunication equipment
conforms to NTC technical requirement.
Complies with IDA
Standards
DB00353
Notice for customers in
India
Attach the supplied plug adaptor.
Location of the
identification label
Labels for Model No. and Power Supply
rating (in accordance with applicable
safety regulation) are located on the rear of
the TV. They can be found by removing
the bottom cover.
GB
2
Table of Contents
Checking the accessories.............................................................................................................. 3
Inserting batteries into the remote................................................................................................. 3
Setting Up
Attaching the Table-Top Stand (KDL-52LX900 only).................................................................... 4
Connecting an antenna (aerial)/cable/VCR................................................................................... 5
Preventing the TV from toppling over............................................................................................6
Bundling the cables ....................................................................................................................... 6
Performing the initial set-up........................................................................................................... 7
Detaching the Table-Top Stand from the TV................................................................................. 7
Watching TV
To watch programmes................................................................................................................... 8
To utilise the TV’s features ............................................................................................................ 8
To use i-Manual............................................................................................................................. 9
To use 3D Glasses...................................................................................................................... 10
Additional Information
Troubleshooting........................................................................................................................... 12
Specifications .............................................................................................................................. 13
Installing the Accessories (Wall-Mount Bracket) ......................................................................... 15
Safety Information ....................................................................................................................... 20
Precautions.................................................................................................................................. 21
• Operating instructions are built into your BRAVIA TV. Refer to “To use i-Manual” for operation (page 9).
• Before operating the TV, please read “Safety Information” (page 20). Retain this manual for future reference.
Checking the accessories
AC power cord (mains lead)
Cable holder (1) (KDL-52LX900 only)
Remote (1)
Size AAA batteries (R3 type) (2)
Table-Top Stand (1) (KDL-52LX900 only)
Fixing screws for Table-Top Stand
(M5 × 16) (4) (KDL-52LX900 only)
Stand rear cover (1)*
Bottom cover (1)*
Black spacers (4) (KDL-52LX900 only)
Silver spacers (4) (KDL-60LX900 only)
Screws (M6 × 20) (4) (KDL-60LX900 only)
3D Glasses (battery included) (2)
Pouch for 3D Glasses (2)
*1For KDL-60LX900, the stand rear cover is
factory-attached to the Table-Top Stand.
2
For KDL-60LX900, the bottom cover is factory-
*
attached to the TV.
1
2
Inserting batteries into the remote
1 Remove the protection sheet.
2 Push and slide the cover upward.
GB
3
Setting Up
Attaching the Table-Top Stand (KDL-52LX900 only)
1 Refer to the supplied Table-Top Stand
leaflet for proper attachment for some
TV models.
2 Place the TV set on the Table-Top
Stand.
3 Fix the TV to the Table-Top Stand
according to the arrow marks that
guide the screw holes using the
supplied screws.
Adjusting the viewing angle of
the TV (KDL-52LX900 only)
This TV can be adjusted within the angles
shown below.
6º0º
1
4
~
• If using an electric screwdriver, set the tightening
torque at approximately 1.5 N·m {15 kgf·cm}.
4 After all the screws have been
tightened, attach the supplied stand rear
cover to the Table-Top Stand.
Remove screw as
shown.
2
~
• To return to 0°, reverse the above procedure.
Install screw into
the top screw hole
of the Table-Top
Stand.
3
Slide in.Lift up and tilt.
GB
4
• Ensure that there are no objects in front of the TV.
IR Sensor
3D Sync
Transmitter
Intelligent Presence Sensor
• Do not expose the Intelligent Presence Sensor to
direct sunlight or other strong light, as
malfunction may occur.
• If the TV is brought directly from a cold to a warm
location, or is placed in a very damp room, or is
placed in a room in which heating has just been
turned on, moisture may condense on the surface
or inside the TV. Should this occur, turn off the
TV and leave the TV off until the moisture
evaporates, and then the TV can be used. If you
notice moisture condensation between the glass
panel and the LCD, turn on the TV and the
condensation will evaporate after the TV has
warmed up.
Connecting an antenna (aerial)/cable/VCR
Connecting an antenna (aerial)/cable
and VCR
Setting Up
Antenna (aerial)
cable (not supplied)
AV cable
(not supplied)
Antenna
(aerial) cable
(not supplied)
Connecting an antenna (aerial)/cable
Antenna (aerial) cable
(not supplied)
VCR
~
• When connecting an antenna (aerial) cable (not
supplied), an adaptor (not supplied) may be
required (Australian model and New Zealand
model only).
Detaching the terminal cover
~
• After connecting cables, re-attach the terminal
cover to the TV.
GB
5
Preventing the TV from toppling over
1 Install a wood screw (4 mm in
diameter, not supplied) in the TV stand.
Bundling the cables
~
• A cable holder is available for KDL-52LX900. To
bundle the cables, follow steps 3 to 5.
~
• Do not bundle the AC power cord (mains lead)
together with other cables.
2 Install a machine screw (M4 × 16, not
supplied) into the screw hole of the TV.
3 Tie the wood screw and the machine
screw with a strong cord (not supplied).
z
• An optional Sony support belt kit is used to secure
the TV. Contact your nearest Sony service centre
to purchase a kit. Have your TV model name
ready for reference.
GB
6
Performing the initial set-up
1 Connect the TV to your AC power
outlet (mains socket).
2 Check the ENERGY SAVING
SWITCH setting is on (
z).
3 Press 1 on the TV.
When you switch on the TV for the first
time, the Language menu appears on the
screen.
~
• i-Manual (page 9) is unavailable when you
select Arabic or Persian.
4
Detaching the Table-Top Stand from the TV
~
• Remove the stand rear cover and bottom cover
prior to detaching the Table-Top Stand.
• Remove the screws guided by the arrow marks
of the TV.
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
Setting Up
Follow the instructions on the screen.
Programme Sorting: Changes the order of
analogue channels stored in the TV.
1 Press F/f to select the channel you want
to move to a new position, then press .
2 Press F/f to select the new position for
the channel, then press .
~
• You can also tune channels manually.
GB
7
Watching TV
To watch programmes
Turn on the TV.
1
2
GUIDE
OPTIONS
HOME
3
z
• The number 5, N, PROG + and AUDIO
buttons on the remote have a tactile dot.
Use the tactile dots as a reference when
operating the TV.
1 Switch ENERGY SAVING SWITCH
z).
on (
2 Press 1 on the TV to turn on the TV.
Select a mode (if both digital and
2
analogue signals are available).
Select a TV channel.
3
Using Digital Electronic Programme
Guide (only available for EPG
supported countries/regions)
Press GUIDE in digital mode to display the
programme guide.
To utilise the TV’s features
HOME button
Press to display various operation and setting
screens.
Settings
System Settings
TV
GB
8
OPTIONS button
Press to display convenient functions based
on the current input or content.
Picture
Sound
3D Menu
Add to Favourites
MPEG Noise Reduction
Presence Sensor
Scene Select
Sleep Timer
Headphone Volume
Speakers
System Information
Loading...