Sony Bravia 55EX645, Bravia KDL-60EX645, Bravia 50EX645, Bravia 46EX645, Bravia 46EX641 Operating Instructions Manual

...

4-436-788-11(1)

LCD TV

Operating Instructions

Introducing Your New BRAVIA

Getting Started

Operating the TV

Using Features

Using the Menus

Other Information

Sony Customer Support

U.S.A.: http://www.sony.com/tvsupport Canada: http://www.sony.ca/support

United States

1.800.222.SONY

Canada

1.877.899.SONY

Please Do Not Return the Product to the Store

KDL-60EX645 / 55EX645 / 50EX645 / 46EX645 / 46EX641 / 40EX645

CAUTION

To prevent electric shock and blade exposure, do not use this polarized AC plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted.

❑ Operate the TV only on 110-240 V AC

(USA/Canada 120 V AC).

❑ Avoid operating the TV at temperatures

below 41°F (5°C).

Licensing Information

Macintosh is a trademark of Apple Inc., registered in the U.S. and other countries.

HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries.

Fergason Patent Properties, LLC:

U.S. Patent No. 5,717,422

U.S. Patent No. 6,816,141

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Blu-ray Disc is a trademark.

“BRAVIA” and , BRAVIA Sync, and are trademarks or registered marks of Sony Corporation.

“PlayStation” is a registered trademark and “PS3” is a trademark of Sony Computer Entertainment Inc.

Opera

DLNA

, the DLNA Logo and DLNA CERTIFIED® are trademarks, service marks, or certification marks of the Digital Living Network Alliance.

Cleaning

When cleaning, be sure to unplug the power cord to avoid any chance of electric shock.

• Wipe the LCD screen gently with a soft cloth.

• Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.

• If using a chemically pretreated cloth, please follow the instruction provided on the package.

• Never use strong solvents such as a thinner, alcohol or benzine for cleaning.

• See the supplied Safety Booklet for additional information.

Your BRAVIA TV is ENERGY STAR® qualified in the “Home” mode. It meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency and Department of Energy.

ENERGY STAR is a joint program of these government agencies, designed to promote energy efficient products and practices. Changes to certain features, settings, and functionalities of this TV (i.e. TV Guide, Picture/ Sound, Light Sensor, Power Savings) can increase or change the power consumption. Depending upon such changed settings, the power consumption may exceed the limits required for the ENERGY STAR qualification in the “Home” mode.

Wi-Fi Protected Set-up ™ (WPS) is a mark of the Wi-Fi Alliance.

Wi-Fi Protected Access ™ (WPA) is a mark of the Wi-Fi Alliance.

Owner’s Record

The model and serial numbers are located at the side and rear of the TV. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this TV.

Model Name

Serial No.

The 55 class has a 54.6 inch viewable image size (measured diagonally).

Contents

Introducing Your New BRAVIA

Welcome to the World of BRAVIA® . . . . . . . .4

Experiencing Stunning HD with Your

BRAVIA . . . . . . . . . . . . . . . . . . . . . . . . . . .4

The Four Steps to a Stunning HD

Experience . . . . . . . . . . . . . . . . . . . . . . . . .5

TV Feature Highlights . . . . . . . . . . . . . . . . . . .5

Getting Started

Setting Up Your TV. . . . . . . . . . . . . . . . . . . . .7

Attaching the Table-Top Stand . . . . . . . . . . . .8

Adjusting the viewing angle of the TV

(except KDL-60EX645) . . . . . . . . . . . . . .10

Locating Inputs and Outputs. . . . . . . . . . . . .11

Connecting the TV . . . . . . . . . . . . . . . . . . . .13

Connecting Other Equipment . . . . . . . . . . . .17

When Installing the TV Against a Wall or

Enclosed Area . . . . . . . . . . . . . . . . . . . . .18

Securing the TV . . . . . . . . . . . . . . . . . . . . . .19

Bundling the cables. . . . . . . . . . . . . . . . . . . .21

Running Initial Setup. . . . . . . . . . . . . . . . . . .22

Operating the TV

Using the Remote Control. . . . . . . . . . . . . . .24

Remote Control Button Description . . . . . . .25

TV Controls and Indicators . . . . . . . . . . . . . .28

Using Features

BRAVIA® Sync™ with Control for HDMI. . . .30

Using PIP Feature. . . . . . . . . . . . . . . . . . . . .31

Using PAP feature . . . . . . . . . . . . . . . . . . . .32

Favorites . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Wide Mode . . . . . . . . . . . . . . . . . . . . . . . . . .33

Wide Mode with PC . . . . . . . . . . . . . . . . . . .34

Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Playing back Photo/Music/Video via USB. . .35

Home Network . . . . . . . . . . . . . . . . . . . . . . .38

Photo Frame . . . . . . . . . . . . . . . . . . . . . . . . .39

Using Home Network Features. . . . . . . . . . .40

Setting up the Internet Connection . . . . . . . . 41

If You Cannot Connect to the Internet . . . . .43

Adjusting the Server Display Settings. . . . . .44

Browsing Websites . . . . . . . . . . . . . . . . . . . .44

Enjoying Sony Entertainment Network . . . . .45

Enjoying Yahoo! Widgets . . . . . . . . . . . . . . .46

Using the Menus

Navigating through TV Menus . . . . . . . . . . .47

Using the Picture Settings. . . . . . . . . . . . . . .49

Using the Sound Settings . . . . . . . . . . . . . . .51

Using the Screen Settings . . . . . . . . . . . . . .53

Using the Channel Settings . . . . . . . . . . . . .55

Using the Parental Lock Settings . . . . . . . . .56

Using the Setup Settings . . . . . . . . . . . . . . .59

Using the Eco Settings . . . . . . . . . . . . . . . . .65

Other Information

PC Input Signal Reference Chart for

PC and HDMI IN. . . . . . . . . . . . . . . . . . . .66

Using a Wall-Mount Bracket . . . . . . . . . . . . .67

Installing the Wall-Mount Bracket . . . . . . . . .68

Troubleshooting . . . . . . . . . . . . . . . . . . . . . .73

Important Notices . . . . . . . . . . . . . . . . . . . . .80

Specifications . . . . . . . . . . . . . . . . . . . . . . . .82

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85

Customer Support United States http://www.sony.com/tvsupport Canada http://www.sony.ca/support

On-line Registration United States http://productregistration.sony.com Canada http://www.sony.ca/registration

Introducing Your New BRAVIA

Welcome to the World of BRAVIA

Thank you for choosing this Sony

BRAVIA® high-definition television. Use the

documentation listed below to get the most out of your TV.

Experiencing Stunning HD with Your BRAVIA

The quality of the image you see on your BRAVIA

TV is only as good as the quality of the

signal it receives. To experience the stunning detail of your new

BRAVIA

TV, you need

access to HD programming. Your

BRAVIA

TV can receive and display HD programming

from:

• Over-the-air broadcasting via HD-quality antenna

• HD cable subscription

• HD satellite subscription

• Blu-ray Disc™ player or other HD compatible external equipment

Contact your cable, satellite or HD service provider for information on upgrading to HD programming.

Safety Booklet

Contains precautionary measures to keep you and your TV safe. Read this information prior to setting up your TV.

Quick Setup Guide

Provides TV setup information with sample connection diagrams.

Operating Instructions

Provides the most detailed information to operate your TV.

Introducing Your New BRAVIA

The Four Steps to a Stunning HD Experience

Set, Source, Sound, and Setup

Along with your BRAVIA TV set, a complete HD system requires a source of HD programming, an HD sound system, and a proper connection setup. Refer to the Quick Setup Guide, enclosed separately, for connecting optional equipment.

TV Feature Highlights

Your BRAVIA comes with many convenient features, such as:

➢ BRAVIA

Sync™: Allows your BRAVIA TV to communicate with other Sony

equipment supporting the Control for HDMI function (page 30).

➢ Digital Media Accessibility: Use the Photo, Music, and Video icons to

access photo, music, and video files from DLNA Certified™ networked equipment or Sony USB equipment (page 35).

➢ PIP (Picture in Picture): You can work on your PC and watch your favorite TV

program simultaneously (page 31).

➢ PAP (Picture and Picture): You can display two pictures (left and right) on the

screen simultaneously (page 32).

➢ Favorites: Your favorite channels and inputs are at your finger tips for easy

access (page 33).

➢ Auto Wide Mode: Set your TV to automatically adjust the screen based on the

signal resolution (page 33).

➢ Input Selection: Allows you to easily switch between the connected equipment

(page 35).

You can enjoy crisp, clear images, smooth movement, and high-impact visuals from 1080 HD signals as shown here. When you compare a high-definition signal to a standard analog signal, you will notice a big difference in picture quality. If black bars appear as shown here, press WIDE on the remote control to fill the screen.

➢ Scene Select: Allows you to easily adjust your TV to the most suitable picture

and sound settings based on the scenes for the best quality result for the contents genre you are watching (page 26).

➢ Yahoo! Widgets: Yahoo! TV Widgets bring the best of the Internet to your TV

(page 46). Yahoo! Widgets allow you to access local weather, news and much more.

➢ DLNA: You can enjoy various content (e.g. photo/music/video files) stored on

DLNA Certified™ media servers. The home network feature allows you to enjoy network content in other rooms. (page 38).

➢ Internet Video: Internet Video brings videos, movies and much more from the

Internet to your TV (page 45).

➢ Browser: Allows you easily browse websites.

➢ Photo Frame: You can enjoy the large photo frame display with music.

➢ On Timer: Set timer to wake up TV automatically with preferred setting of input

and volume. You can also wake up with your favorite photo and music through photo frame feature (page 62).

Getting Started

Setting Up Your TV

Some TV models are packaged with a detached Table-Top Stand so you can mount your TV to a wall right away. If you are not mounting the TV to a wall, you will need to attach the Table-Top Stand. You will need a Phillips screwdriver and the supplied screws to complete the task. Look for the attachment instructions provided with the TV. Be sure to consider the following while setting up your TV:

• Disconnect all cables when carrying the TV.

• Carry the TV with the adequate number of people; larger size TVs require two or more people.

• Correct hand placement while carrying the TV is very important for safety and to avoid damage.

• Ensure your TV has adequate ventilation, see page 18.

• For best picture quality, do not expose the screen to direct illumination or sunlight.

• Avoid installing the TV in a room with reflective wall and floor materials.

• Avoid moving the TV from a cold area to a warm area. Sudden room temperature changes may cause moisture condensation. This may cause the TV to show poor picture and/or poor color. Should this occur, allow moisture to evaporate completely before powering the TV on.

Attaching the Table-Top Stand

Refer to the supplied Table-Top Stand leaflet for proper attachment.

• Do not put stress on the LCD panel or the frame around the screen.

• Be careful to not pinch your hands or the AC power cord when you install the TV set to the TableTop Stand.

1 Place the TV set on the Table-Top Stand.

• Align the TV from the top, slide it in until the guide pins cannot be seen.

2 Fix the TV to the Table-Top Stand using the supplied screws. The arrow marks

indicate the location of the screw holes used for securing the Table-Top Stand.

• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.

Guide pins

Getting Started

Detaching the Table-Top Stand from the TV

To detach the Table-Top Stand from the TV, remove the screws fixed in step 2.

• Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV.

• When removing the Table-Top Stand from the TV, lay the display face down on a stable work surface that is larger than the TV.

• To prevent damaging the surface of the LCD display, make sure to place a soft cloth on the work surface.

• When installing the TV on a wall, remove the screws from the rear of the TV. Be sure to store the removed screws in a safe place, keeping them away from children.

• When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the original holes on the rear of the TV.

Adjusting the viewing angle of the TV (except KDL-60EX645)

This TV can be adjusted within the angles as illustrated.

x Angle Adjustment (Swivel)

• When adjusting the angle, hold the stand with one hand to avoid having the stand slip or TV tip over.

* The angle is approximate value.

*15°

Getting Started

Locating Inputs and Outputs

Item Description

1 DIGITAL AUDIO

OUT (OPTICAL)

Connects to the optical audio input of digital audio equipment that is PCM/ Dolby* Digital compatible.

2 PC IN (RGB) Connects to a personal computer’s video and audio output connector. Can

also be connected to other analog RGB equipment. See “PC Input Signal Reference Chart” on page 66 for the signals that can be displayed. For some Apple Macintosh computers, it may be necessary to use an adapter (not supplied). If an adapter is used, connect the adapter to the computer before connecting the HD15-HD15 cable. You may need to adjust the TV settings or your PC’s resolution and timing. See page 16 for information on how to setup your PC to this TV.

3, 9

HDMI IN 1/2/3/4

HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital audio/video interface between this TV and any HDMI-equipped audio/video equipment, such as a set-top box, DVD player, and A/V receiver. HDMI supports enhanced, or high-definition video, plus digital audio. Be sure to use only an HDMI cable that bears the HDMI logo. Use the HDMI IN 1 port when connecting DVI equipment. Use a DVI-toHDMI cable or adapter (not supplied). Equipment using a DVI connection also requires an additional audio connection using an audio cable connected to PC/HDMI 1 AUDIO IN of PC IN.

* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are

trademarks of Dolby Laboratories.

Side PanelRear Panel

(Continued)

• An HDMI or Component video (YPBPR) connection is required to view 480i, 480p, 720p, 1080i and 1080p video formats. 1080/24p is available only with HDMI connection.

4 CABLE/

ANTENNA

RF input that connects to your Cable or VHF/UHF antenna.

5 VIDEO IN 1/

COMPONENT IN/R-AUDIO-L (MONO)

This input port can be used as a composite video input (VIDEO 1) or as a component video input (COMPONENT). For composite use, connect the yellow jack to Y for video and use audio L (mono) and R for audio signal. For component connection, use Y, PB, PR for video signals and also connect the audio L (mono) and R for audio signal. This TV can auto detect and switch between the VIDEO 1 and COMPONENT when VIDEO 1 or COMPONENT is connected. To set to auto detection, press HOME, select Settings, and then select the

Setup settings. Select the Video1/Component Selection option in AV Setup then set to Auto.

6 AUDIO OUT Connects to the audio input jack of your analog audio equipment. You can

use this output to listen to your TV’s audio through your stereo system.

7 LAN You can enjoy contents stored in DLNA Certified™ devices via a network

(page 35), and also IPTV, Yahoo! Widgets and Internet Browser are available.

8 USB Connects to USB equipment to access photo, music, and video files.

A standard USB mouse and USB keyboard can also be connected to the USB ports. An USB mouse or USB keyboard can only operate while navigating on the internet browser (page 44).

0 VIDEO IN 2

VIDEO/L (MONO)AUDIO-R

Connects to the composite video output jack of video equipment. If you have mono equipment, connect its audio output port to the TV’s L (MONO) audio input port.

Item Description

Getting Started

Connecting the TV

Cable System or VHF/UHF Antenna System

You can enjoy high-definition and standard-definition digital programming (if available in your area) along with standard-definition analog programming. This TV is capable of receiving unscrambled digital programming for both cable (QAM and 8VSB) and external VHF/UHF antenna (ATSC).

x Cable or VHF/UHF (or VHF only)

• It is strongly recommended that you connect the CABLE/ANTENNA input using a 75-ohm coaxial cable to receive optimum picture quality. A 300-ohm twin lead cable can easily be affected by radio frequency interference, resulting in signal degradation.

Cable System and VHF/UHF Antenna System

Use an optional A-B RF switch (not supplied) to switch between the cable and over-theair antenna programming, as indicated below.

• Be sure to set the Signal Type setting to Cable or Antenna found under the Channel settings for your input signal (page 55).

75-ohm coaxial cable Rear of TV

CABLE/ANTENNA

Cable

Antenna

A/B RF Switch

Rear of TV

CABLE/ANTENNA

HD Cable Box/HD Satellite Box

You can enjoy high-definition programming by subscribing to a high-definition cable service or a high-definition satellite service. For the best possible picture, make sure you connect this equipment to your TV via the HDMI or component video (with audio) input located on the back of your TV.

x Shown with HDMI Connection

x Shown with DVI Connection

Rear of TV

HDMI cable

HD cable box/ HD satellite box

CATV/Satellite antenna cable

Rear of TV

DVI-to-HDMI cable

HD cable box/ HD satellite box

CATV/Satellite antenna cable

Audio cable (stereo mini plugs)

Getting Started

x Shown with Component Connection

• If your equipment has a DVI output and not an HDMI output, connect the DVI output to the HDMI IN 1 (with DVI-to-HDMI cable or adapter) and connect the audio output to the AUDIO IN of PC IN. For details, see page 11.

Rear of TV

CATV/Satellite antenna cable

AUDIO-R (red)

AUDIO-L (white)

Component video cable

Audio cable

(red)

(blue)

Y (green)

HD cable box/ HD satellite box

Use the TV as a monitor for your PC by connecting an HD15-HD15 cable connection as shown below. This TV can also be connected to a PC with a DVI or HDMI output. (Refer to the separate Quick Setup Guide.)

• Connect the PC IN jack to the PC using an HD15-HD15 cable with ferrite core (analog RGB) and audio cable (page 11).

Rear of TV

HD15-HD15 cable (analog RGB)

Audio cable (stereo mini plugs)

Getting Started

Connecting Other Equipment

• Refer to the Quick Setup Guide (supplied) when connecting other equipment to your TV.

Personal computer

Blu-ray Disc Player/“PS3”

DVD player

Digital satellite receiver

Analog audio equipment (A/V Receiver/ HomeTheater)

Digital cable box

Audio system

Digital audio equipment (A/V Receiver/ Home Theater)

Digital recorder

VCR/Game system/ Camcorder

USB

CABLE/ ANTENNA

Router/ Modem

When Installing the TV Against a Wall or Enclosed Area

Make sure that your TV has adequate ventilation. Allow enough space around the TV as shown below. Avoid operating the TV at temperatures below 41 °F (5 °C).

• Inadequate ventilation can lead to overheating of the TV and may cause TV damage or cause a fire.

(30 cm)

inches

(6 cm)

inches

4 inches (10 cm)

Leave at least this much space around the set.

Installed with stand

inches

4 inches (10 cm)

(30 cm)

Installed on the wall

Leave at least this much space around the set.

Never install the TV set as follows:

Air circulation is blocked.

Wall Wall

Getting Started

Securing the TV

Sony strongly recommends taking measures to prevent the TV from toppling over. Unsecured TVs may topple and result in property damage, serious bodily injury or even death.

Preventing the TV from Toppling

❑ Secure the TV to a wall and/or stand. ❑ Do not allow children to play or climb on furniture and TV sets. ❑ Avoid placing or hanging items on the TV. ❑ Never install the TV on:

• Slippery, unstable and/or uneven surfaces.

• Furniture that can easily be used as steps, such as a chest of drawers.

❑ Install the TV where it cannot be pulled, pushed, or knocked over. ❑ Route all AC power cords and connecting cables so that they are not accessible to curious

children.

Recommended Measures to Secure the TV

Consider the following measures when securing your TV to a TV stand (not supplied).

1 Secure the stand for the TV.

Make sure the TV stand can adequately support the weight of the TV. Use two angle braces (not supplied) to secure the stand. For each angle brace use the appropriate hardware to:

• Attach one side of the angle brace to the wall stud.

• Attach the other side to the TV stand.

Angle braces

Stand

(Continued)

2 Secure the TV to the stand.

Use the optional hardware listed below (not supplied):

• M4 machine screw (screwed into the TV’s Table-Top Stand).

• A screw or similar (attach it to the TV stand).

• Rope or chain (strong enough to support the weight of the TV). Make sure that there is no excess slack in the rope or chain.

An alternative way to secure the TV is with an optional Sony Support Belt Kit.

3 Anchor the TV to the wall.

Anchor the TV to the wall by using bolts, wall anchor and chain (or rope).

• Contact Sony Customer Support to obtain the optional Support Belt Kit by providing your TV model name. For United States call: 1-800-488-7669 or visit: www.sony.com/accessories For Canada call: 1-877-899-7669

• Securing the TV to the stand without securing the TV and the stand to the wall provides minimum protection against the TV toppling over. For further protection, be sure to follow the three measures recommended.

Screw hole on the Table-Top Stand

M4 machine screw (not supplied)

Screw (not supplied)

Rope or chain (not supplied)

The length of the M4 machine screw differs depending on the rope or chain diameter. Please refer to right illustration.

6-8 mm

Screw M4 rope or chain

TV’s Table-Top Stand

Wall-mount holes

Anchor bolts (not supplied)

Wall-anchor (not supplied)

Rope or chain (not supplied)

Getting Started

Bundling the cables

Before bundling the cables, remove the cable holder from the AC cover. Reuse the cable holder to bundle the other cables.

• Do not bundle the AC power cord together with other cables.

* When installing on the wall, attach the cable holder under the terminals.

Running Initial Setup

During initial setup, you will perform the following:

• Set the language for the On Screen Display (OSD) text

• Choose your viewing country

• Select the type of use

• Scan for digital and analog channels

• Set the current time

• Set the network setup

• Download the software

Complete your cable connections before beginning the Initial Setup. Refer to the Quick Setup Guide (supplied) for sample connection diagrams.

2 Use the remote control buttons described below to navigate through the Initial

Setup.

3 Auto Program will scan for available channels from the signal source directly

connected to the TV’s CABLE/ANTENNA input. Follow the help text provided on the screen to run the Auto Program.

1 Turn on the TV.

The Initial Setup screen will appear.

V/v/B/b buttons:

Allow you to navigate and highlight options where applicable.

button:

Allows you to select the highlighted option and advance to the next screen.

ConfirmConfirm

Please select your language:

English

Español

Français

Initial Setup

Getting Started

• If you cancel the Auto Program, any channels you have

selected are not registered. To rescan for available channels, run Auto Program.

• Connect either your cable or antenna to the TV (you can connect both using an A-B RF switch (not supplied)); for more details see page 13.

• When promoted to select Retail or Home, be sure to select Home for ENERGY STAR compliant mode.

4 Set the current date and time.

Please select the type of use for this TV.

"Home" optimizes the picture for normal home use and is ENERGY

STAR qualified.

"Retail" optimizes the picture for store display.

Location

ConfirmConfirm

Back

RETURN

Home

Retail

Operating the TV

Using the Remote Control

To Insert Batteries into the Remote Control

Insert two size AAA batteries (supplied) by matching e and E on the batteries to the diagram inside the battery compartment of the remote control.

Guidelines to follow

• Point your remote control directly at the IR sensor located on your TV.

• Make sure that no objects are blocking the path between the remote control and the IR sensor on your TV.

• Fluorescent lamps can interfere with your remote control; try turning off the fluorescent lamps.

• If you are having problems with the remote control, reinsert or replace your batteries and make sure that they are correctly inserted.

• Ensure that there are no objects in front of the TV.

IR Sensor

Operating the TV

Remote Control Button Description

• The 5, N and CH + buttons have a tactile dot. Use them as a reference when operating the TV.

Button Description

1 INPUT Press to display the list of External Inputs and TV

mode. Press repeatedly to toggle through the inputs. See page 35.

2 WIDE Press repeatedly to cycle through the available

Wide Mode settings. See page 33.

3 Equipment

Control

These buttons are used to control the equipment connected to the TV by using the Control for

HDMI function (not available on all Control for HDMI equipment). Some other buttons on the remote control may also operate BRAVIA

Sync™ equipment.

(PREV): Press to replay the current program

from the previous chapter mark.

X (PAUSE): Press to pause playback. x (STOP): Press to stop playback. > (NEXT): Press to advance forward to the

next chapter mark. m (fast reverse): Press to play a program in fast rewind mode. N (PLAY): Press to play a program at a normal speed. M (fast forward): Press to play a program in fast forward mode.

4 Colored

buttons

When the colored buttons are available, an operation guide appears on the screen.

1 2

qs qd

7 8

4 5 6

qg qh

qj qk

ws wd

(Continued)

• When you set Scene Select to Photo, Music, Cinema, Game or Sports, Sound Mode is automatically set to Standard.

• The scene select function is not compliant with USB/DLNA-Photo, -Music, -Video, IPTV, Yahoo! Widgets and Internet Browser.

Button Description

5 PHOTO

FRAME

Press to display the Photo Frame. See page 39.

6 SCENE Optimizes picture and sound quality by selecting

the following items. Auto: Automatically optimizes picture and sound quality according to the input source. General: No optimized picture and sound quality for any scene. Photo: Reproduces the texture and color of a printed photo. Music: Lets you experience dynamic and clear sound just like at a concert. Cinema: Delivers picture and sound just like in a theater. Game: Broadens your game-playing experience with superb picture and sound quality. Graphics: Eases prolonged monitor viewing with clearer detailed pictures. Sports: Presents realistic pictures and sound just like in a stadium.

7 RETURN Press to go back to the previous screen or exit

from the screen when displaying menu items and settings.

8 HOME/

Press to display the menu with TV functions and settings. See “Using the Menus” on page 47.

9 NETFLIX Press to display the NETFLIX menu. 0 0-9 Press 0-9 to select a channel. qa Use with 0-9 to select digital channels.

For example, to enter 2.1, press , , and

qs MUTING Press to mute the sound. Press again or press

VOL + to restore the sound.

qd VOL (2)

+/–

Press to adjust the volume.

qf POWER

"/1

Press to turn on and off the TV.

2 1

Operating the TV

Button Description

qg SYNC

Press to display the BRAVIA Sync Menu and then select connected HDMI equipment from

HDMI

Device Selection

qh SEN Enables selection of content from the online

service “SEN” (Sony Entertainment Network). If “SEN” is unavailable, the “SEN” category is not displayed.

qj DISPLAY Press once to display the banner with channel/

program information you are watching. The banner will time out in a few seconds or press again to exit.

qk V/v/B/b Press V/v/B/b to move focus/highlight. Press

to select/confirm an item.

ql OPTIONS Press to display a list of convenient functions and

menu shortcuts. The options menu items vary based on current input and content.

w; INTERNET

APPS

Press to display the Yahoo! Widgets.

wa CC/

SUBTITLE

Press to cycle through the available settings for

Closed Captions (CC) : On, Off, and On when Muting.

ws JUMP Press to jump back and forth between two

channels and external inputs. The TV alternates between the current/last channel or external input selected.

wd CH +/– Press to scan through channels. To scan quickly

through channels, press and hold down either CH +/–.

TV Controls and Indicators

Item Description

1 Light sensor

(IR) Infrared Receiver

Senses room light level and adjusts the screen brightness accordingly. Do not put anything over the sensor, doing so may affect its function. Receives IR signal from the remote control.

2 (Picture

Off)/ (Timer) LED

Lights up in orange when the On Timer/Sleep Timer/Photo Frame is set. If you set to On Timer, lights up in orange while the TV is also in standby mode. Lights up in green when the Power Saving is set to Picture Off.

3 1 (Standby)

LED

Lights up in red when the TV is in standby mode.

4 " (Power) LED Lights up in green when the TV is turned on. 5 "/1 (Power) Press to turn on and off the TV. 6 – CH + Press to scan through channels. To scan quickly through channels, press and

hold down either CH –/+. In the menu screen, these buttons serve as up/down buttons.

7 – 2 +Press to adjust the volume. In the menu screen, these buttons serve as left/

right buttons.

t (Input)

Press to display the list of external inputs. Press repeatedly to toggle through the inputs.

In the menu screen, this button serves as confirming the selection or setting.

9 HOME Press to display menu with TV functions and settings (see “Using the Menus”

on page 47).

Operating the TV

• For more information about setting up the external inputs labels, see page 62.

• The CH + button has a tactile dot. Use it as a reference when operating the TV.

• Make sure that the TV is completely switched off before unplugging the power cord.

Using Features

BRAVIA® Sync™ with Control for HDMI

With the Control for HDMI function, BRAVIA Sync helps to communicate with BRAVIA Sync-compatible equipment

using HDMI CEC (Consumer Electronics Control). Use the following settings and tips to help unify control of your connected equipment.

1 Press HOME and select Settings,

then select the Setup settings.

2 Select the HDMI Settings, then

highlight Control for HDMI, and set to On.

x Controlling BRAVIA Sync-

Compatible Equipment

To control the equipment by using the remote control, press SYNC MENU and select the desired equipment from HDMI Device Selection.

x BD/DVD Player

• Automatically turns the BRAVIA Synccompatible equipment on and switches the input to that equipment when you select it from the Sync Menu.

• Automatically turns the TV on and switches the input to the connected equipment when the equipment starts to play.

• Automatically turns the connected equipment off when you switch the TV to standby mode.

x AV Amplifier

• Automatically turns the connected AV amplifier on and switches the sound output from the TV speaker to the audio system when you turn the TV on.

• Automatically switches the sound output to the AV amplifier by turning the AV amplifier on when the TV is turned on.

• Automatically turns the connected AV amplifier off when you switch the TV to standby mode.

• Adjusts the volume (VOL +/-) and mutes the sound (MUTING) of the connected AV amplifier through the TV’s remote control.

x Video Camera

• Automatically turns the TV on and switches the input to the connected video camera when the connected video camera is turned on.

• Automatically turns the connected video camera off when you switch the TV to standby mode.

• Control for HDMI (BRAVIA Sync) is only available for the connected Sony equipment that has the BRAVIA Sync or is compatible with Control for HDMI.

• The Control for HDMI settings must be set on both the TV and connected equipment. For settings on the connected equipment, refer to their instruction manuals.

• When specific Sony equipment compatible with Control for HDMI (BRAVIA Sync) is connected, BRAVIA sync is automatically activated on the equipment.

Sync Menu

HDMI 1

HDMI Device Selection

Device Control

Speakers

TV Control

Return to TV

Exit

RETURN

+ 101 hidden pages