Sony Bluetooth Enabled Car Kit User Manual

OPERATING MANUAL

Bluetooth Enabled Car Kit

Version 3.5

OVERVIEW

This unit uses Bluetooth technology that allows wireless communication among devices such as cellular phones. This is designed to be a totally wireless hands-free Car Kit. This will enable the user to communicate freely while driving, without holding the phone. This unit will work on all Bluetooth cellular phones provided that they respect the Bluetooth protocol.

1 – Multi-function Button - Answer/Hang-up/Pairing/Voice Recognition) / Indicator lights / Timer (See page 3). 2 – Cigarette Lighter Plug - Specially designed to fit into the cigarette lighter jack with a swivel mount up to 120°. 3 – Speaker - Allows the user to hear the voice of the other party. 4 – Volume Control - This rotary control will adjust the audio volume of the speaker.

A. OPERATIONS

Before use, the Car Kit must be paired with the phone. This car kit requires either of two pairing modes (Handsfree or Headset mode) which you will select depending on your cellular phone. Pairing is done only once. After being paired, the phone and the Car Kit becomes connected. You can answer or make a call using the car kit instead of your phone. (For the instructions, please refer to Car Kit Operations for Popular Cell Phones on page 6).

B. INSTALLING THE MICROPHONE

1. Put two (2) "AAA" Alkaline batteries in the wireless microphone. The negative polarity of the batteries must be in the spring side. Note: Microphone battery life is more than 500 calls (if 3 calls/day, battery life = more than 5 months).

2. It is highly recommended that you attach your microphone to the sun visor(See figure

3). Please make sure that it does not hide the microphone otherwise your voice will be attenuated.

3. Turn "ON" the microphone by using the power switch.

Figure 1

Note:

Recommended Function Controls

• Wireless Microphone Illustration

Figure 4.

Figure 2

Figure 3

REMARKS:

§ If microphone is not “ON” during a communication, the sound on the speaker will be attenuated.

§ In standby mode, the microphone will still have a small consumption (less than 1.8 microwatts).

§ On some versions, the indicator light will only turn ON for 2 seconds after the microphone is switched ON. If the light is red, this indicates low battery.

§ The microphone is activated by the Hands-Free Car Kit base and can remain in “ON” position even if not used. But in order to extend battery life, it is recommended to switch “OFF” your microphone when you won’t use it for a long time.

C. FUNCTION CONTROLS

Adjust the Function Controls as recommended:

1. Tone Control

“H” for High Tone

“L” for Low Tone.

2. ASP Control

ON = Echo and Feedback Canceller OFF = Echo Reducer only

3. Adjustable Microphone Gain (MIC) Control

“H” for high gain; “L” for low gain.

"L" is necessary in noisy background. Control Switches

The Microphone gain must be adjusted to match with your cell phone model. If the gain is too high, it can cause feedback (whistling sound), echo or background noise during calls on some cell phones.

Setting (Working on all models):

MIC = L ASP = ON TONE = H

On high background environment, If you experience audio level fluctuation, turn ASP ‘’ OFF ’’.

D. SETTING THE VOLUME

There are two volume controls. One is on the main unit. See (4) on figure 1. The other is the volume key of your cell phone. Use the volume control of the Car Kit and the volume keys of your cell phone. Note: If the volume set is too high, it can cause feedback (whistling sound), echo or background noise during calls on some cell phones.

E. ANSWERING/RECEIVING A CALL

When the phone is receiving a call, the phone ring tone will be heard on the Car Kit. Just press the multi-function button (1) on the main unit to answer the call. Pressing the button again will hang-up and terminate the call. (Please refer to Car Kit Operations for Popular Cell Phones section on page 4 for additional information).

F. MAKING A CALL

(Refer to Car Kit Operations For Popular Cell Phones section on page 4).

Important Remarks:

• On some versions of Nokia’s software, the Car Kit will not connect automatically to the cell phone. You will need to press the multi-function button once to connect it to the cell phone.

• If disconnection problem will be encountered on some Nokia cell phones, kindly turn off the keypad tone of your cell phone.

CAR KIT OPERATIONS FOR POPULAR

CELL PHONES

Note 1: If your phone is not included in the following list of this manual, kindly refer to the manual of your phone.

Note 2: Softwares and menus could be modified by the cell phone’s manufacturers without prior notice. If the manual does not match with your cell phone operations, kindly refer to the manual of your cell phone.

Note 3: Multi-pairing is now possible.

Ericsson T39m ………………………………….……………………… 8 Sony Ericsson T68/T68i ……………………………….………………………… 9 Sony Ericsson P800 / P900 ………………………………….……………………… 12 Sony Ericsson T610 ………………………………….……………………… 14 Sony Ericsson T628 ………………………………….……………………… 15 Sony Ericsson Z600 ………………………………….……………………… 17 Sony Ericsson K700i ………………………………….……………………… 18 Motorola E398 ………………………………….……………………… 20 Motorola V80 ………………………………….……………………… 22 Motorola V600 ………………………………….……………………… 23 Nokia 6310/6310i ………………………………….……………………… 25 Nokia 8910 ………………………………….……………………… 27 Nokia 8910i ………………………………….……………………… 29 Nokia 3650 ………………………………….……………………… 31 Nokia 6230 ………………………………….……………………… 33 Nokia 6650 ………………………………….……………………… 34 Nokia 6600 ………………………………….……………………… 36 Panasonic X70 ………………………………….……………………… 38 Qtek 2020 ………………………………….……………………… 40 Sharp GX32 ………………………………….……………………… 41 Siemens S55 ………………………………….……………………… 42

Suggested Pairing Modes

Cell Phone Models

Ericsson T39m Sony Ericsson T68 Sony Ericsson T68i (R6 and below) Sony Ericsson T68i (R7) Sony Ericsson P800 / P900 Sony Ericsson T610 Sony Ericsson T628 Sony Ericsson Z600 Sony Ericsson K700i Motorola E398 Motorola V80 Motorola V600 Nokia 6310/6310i Nokia 8910 Nokia 8910i Nokia 3650 Nokia 6230 Nokia 6650 Nokia 6600 Panasonic X70 Qtek2020 Sharp GX32 Siemens S55

Pairing Mode

Handsfree Headset

The Car Kit turns on automatically when the engine is turned on. The

ON state is designated by the Bluetooth indicator LED flashing “Blue”.

Note 1: Handsfree Pairing Mode

From the ON state, press the multi-function button for 10 seconds or

until a distinctive three-tone sound will be heard and at the same time, the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue. This indicates that the unit is now ready for Handsfree Pairing.

Note 2: Headset Pairing Mode

From the ON state, press the multi-function button for 10 seconds or

until a distinctive three-tone sound will be heard and at the same time, the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue.

Press the multi-function button again for a short time to access

Headset Pairing Mode.

USING WITH SONY ERICSSON T39m

a. ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between

your mobile phone and other Bluetooth devices.

1. Press Menu Key. Scroll to Extras and press YES. Select Operation mode, YES. On, YES.

2. Continue pressing NO to exit.

QUICK ACCESS: Press Menu followed by the sequence of numbers below.

Extras Blue tooth Operation mode

T39m 5 6 4

b. PAIRING TO THE CELLULAR PHONE

1. Bring the cellular phone at about 20 cm from the Car Kit.

2. From the ON state, press the multi-function button for 10 seconds or until a distinctive three-tone sound will be heard and at the same time, the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue. This indicates that the unit is now ready for pairing.

3. Press the multi-function button once again for a short time, to access headset pairing mode.

4. Press Menu Key. Scroll to Extras, YES. Select Bluetooth, YES. Select Paired devices, YES. Add device, YES. Choose Phone initiates, YES. Choose Headset, YES. The phone will then search the device to be added. After the device is found, press YES.

QUICK ACCESS (for step 4):

Press Menu then follow the sequence of numbers below:

T39m 5 6 2 Yes 1 2

5. Enter “0000” as the passkey. If the pairing is successful, the alternating red/blue lights will stop. Press YES to confirm the name of the device. If pairing is unsuccessful, the steps above may be repeated.

6. Continue pressing NO to exit from Menu.

The unit is now ready to link calls from the phone directly to the Car Kit.

c. ANSWERING/RECEIVING A CALL

When the phone is receiving a call, a ring tone will be heard on the Car Kit.

1. Press the multi-function button once to answer the call. Note: Pressing the button again

will hang-up and terminate the call.

2. If you wish to answer the call on the cellular phone, just press YES and audio will be heard on the phone. If you press once on the multi-function button, audio will be transferred to the Car Kit.

3. Pressing the multi-function button once again will terminate the call.

d. MAKING A CALL with the Car Kit on Normal dialing

1. Enter the contact number and press YES. Audio can be heard on the Car Kit.

2. Press the multi-function button to hang-up and terminate the call.

Extras Blue tooth

Simultaneously, a question “Retrieve call in phone?” will be displayed. Ignoring or pressing No, will retain the call to the Car Kit. Pressing Yes will transfer the audio to the cell phone.

Paired

devices

Add

device

Phone

initiates

Headset

Voice dialing

Refer to step f and g for the procedure when activating and recording for voice dialing.

1. Press the multi-function button once to activate the voice dialing.

2. A beep will then be heard on the Car Kit prompting the user to say the name of the person to call.

3. Say the name. The name will be played back to you. The phone will then place the call automatically. In case the cell phone does not recognize the name spoken, the steps above may be repeated.

4. Press the multi-function button once again to terminate the call.

e. AUDIO TRANSFER

Audio Transfer can be done by pressing the multi-function button or accessing the cell phone’s menu during ongoing calls.

f. ACTIVATING THE VOICE DIALING

Use your phone when recording for voice dialing. Before voice dialing, you must first turn on the name dialing function and record your voice. To turn voice dialing on and record number types:

1. Press Menu Key. Scroll to Settings, YES. Voice control, YES.

2. Voice settings, YES. Voice dialing, YES. Select On, YES.

3. Continue pressing NO to exit.

QUICK ACCESS:

Press Menu followed by the sequence of numbers below.

Settings Voice control Voice settings Voice dialing On

T39m 4 9 1 1 1

g. RECORDING FOR VOICE DIALING

1. Press Menu Key. Scroll to Settings, YES. Voice control, YES. Voice Commands, YES. Select Contacts, YES. Add voice, YES.

2. Find a contact name and follow the instructions in the display. An icon will appear next to a contact name which has a voice command.

3. Continue pressing NO to exit.

QUICK ACCESS:

Press Menu followed by the sequence of numbers below.

T39m 4 9 2 4

Note: Noisy environment may affect voice recognition. Record your voice in a quiet environment.

Settings Voice control Voice commands Contacts

USING WITH SONY ERICSSON T68/T68i

a. ACTIVATING THE BLUETOOTH

You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices.

1. Go to Menu by pressing the joystick. Scroll to Connect, YES. Select Bluetooth, YES. Select Options, YES. Operation mode, YES. On, YES.

2. Continue pressing NO to exit.

QUICK ACCESS: Press Menu followed by the sequence of numbers below.

Connect Blue tooth Options Operation mode

T68 8 3 - 2

T68i 8 4 (or 3 for T68i R7) 4 1

b. PAIRING TO THE CELLULAR PHONE

1. Bring the cellular phone at about 20 cm from the Car Kit.

3. For T68 and T68i older versions, R6 and below, press the multi-function button once again for a short time, to access headset pairing mode.

4. Go to Menu by pressing the joystick. Scroll to Connect, YES. Select Bluetooth, YES.

5. Select Paired devices, YES. Add device, YES. Choose Phone initiates, YES. Choose Headset/Handsfree, YES. The phone will then search the device to be added. After the device is found, press YES.

QUICK ACCESS (for steps 4 and 5):

Press Menu then follow the sequence of numbers below:

T68 8 3 2 Yes 1 2

T68i 8 4 (or 3 for T68i R7) 2 Yes 1 2

6. Enter “0000” as the passkey. If pairing is successful, the alternating red/blue lights will

7. Continue pressing NO to exit from menu.

The unit is now ready to link calls from the phone directly to the Car Kit. An icon, will appear during the standby mode indicating that the Car Kit is linked with the phone.

c. ANSWERING/RECEIVING A CALL

When the phone is receiving a call, a ring tone will be heard on the Car Kit.

1. Just press the multi-function button once to answer the call. Pressing the button again

2. If you wish to answer the call on the cellular phone, just press YES and the call will be

3. To terminate the call, press the multi-function button again.

d. MAKING A CALL with the Car Kit on Normal dialing

Voice dialing

Connect Blue tooth

stop. Press YES to confirm the name of the device. If pairing is unsuccessful, the steps above may be repeated.

will hang-up and terminate the call. heard on the phone. Pressing the multi-function button will transfer the call to the Car

Kit.

1. Enter the contact number and press YES. Audio will be heard on the Car Kit. Simultaneously, a question “Retrieve call in phone?” will be displayed. Ignoring or pressing No, will retain the audio to the Car Kit. Pressing Yes, will transfer the audio to the cell phone.

2. Press the multi-function button to terminate the call.

Refer to step g and h for the procedure when activating and recording for voice dialing.

1. Press the multi-function button once to activate the voice dialing.

Paired

devices

Add

device

Phone

initiates

Headset/

Handsfree

2. A beep will then be heard on the Car Kit prompting the user to say the name of the person to call.

3. Say the name. The name will be played back to you. The phone will then place the call automatically. In case the cell phone does not recognize the name spoken, the steps above may be repeated.

4. Press the button again to terminate the call.

Redialing

For T68i R6 and R7, press twice quickly the multi-function button. Call is automatically transferred to the Car Kit.

e. AUDIO TRANSFER

Audio Transfer can be done by pressing the multi-function button or accessing the cell phone’s menu during ongoing calls.

f. REJECTING A CALL

For T68i R6 and R7, press the multi-function button twice to reject the incoming call.

g. ACTIVATING THE VOICE DIALING

Use your phone when recording for voice dialing. Before voice dialing, you must first turn on the name dialing function and record your voice. To turn voice dialing on and record number types:

Using T68 Sony Ericsson

1. Go to Menu by pressing the joystick. Scroll to Settings, YES. Voice control, YES.

2. Voice settings, YES. Voice dialing, YES. Select On, YES.

3. Continue pressing NO to exit

Using T68i Sony Ericsson

1. Go to Menu by pressing the joystick. Scroll to Settings, YES. Voice control, YES. Voice dialing, YES.

2. Select On, YES.

3. Continue pressing NO to exit

QUICK ACCESS:

Press Menu followed by the sequence of numbers below.

Settings

T68 5 8 1 1 1

T68i 5 6 - 1 1

h. RECORDING FOR VOICE DIALING

Using T68 Sony Ericsson

1. Go to Menu by pressing the joystick. Scroll to Settings and press YES. Choose Voice control, YES. Voice Commands, YES. Select a contact, YES. Add voice,

YES.

2. Follow the instructions in the display. An icon will appear next to a contact name which has a voice command.

3. Continue pressing NO to exit.

Using T68i Sony Ericsson

1. Go to Menu by pressing the joystick. Scroll to Settings and press YES. Choose Voice control, YES then go to Voice dialing, YES. Edit name, YES. Add voice,

YES.

2. Select a contact, YES.

Voice

control

Voice

settings

Voice

dialing

3. Follow the instructions in the display. An icon will appear next to a contact name which has a voice command.

4. Continue pressing NO to exit.

QUICK ACCESS:

Press Menu followed by the sequence of numbers below.

T68 5 8 2 4

T68i 5 6 1 2

Note: Record your voice command in a quiet place so that only your voice will be recorded on the phone.

Settings Voice control Voice commands Contacts

Settings Voice control Voice dialing Edit names

USING WITH SONY ERICSSON P800 / P900

a. ACTIVATING THE BLUETOOTH

You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices.

1. Flip to open mode. On the phone’s Applications window, scroll to Control Panel and tap it using the “stylus”. On the lower portion, tap Connections index. Tap Bluetooth.Tap Settings index. On the Operation mode, tap On.

2. Tap to exit and return to the Applications window.

b. PAIRING TO THE CELLULAR PHONE

1. Bring the cellular phone at about 20 cm from the Car Kit.

3. Press the multi-function button once again for a short time, to access headset pairing mode.

4. Flip to open mode. On the phone’s Applications window, scroll to Control Panel and tap it. On the lower portion, tap Connections index. Tap Bluetooth. Tap Devices index. Bluetooth devices is displayed as sub-title. Tap Add. The phone is now searching for pairable devices.

5. Devices found are then displayed. Tap the device you want to pair with your phone. Bonding in progress will be displayed on screen and simultaneously, the phone will ask for the pass key.

6. On the lower left corner of the screen, tap . Enter “0000” as the passkey then tap Done. Also tap Done under the sub-title, “Secure Connection.” If pairing is successful,

the alternating red/blue lights will stop.

7. Tap to exit and return to the Applications window. If the pairing is unsuccessful, the steps above may be repeated.

The unit is now ready to link calls from the phone directly to the Car Kit. An icon will appear during the standby mode indicating that the Car Kit is linked with the phone.

c. ANSWERING/RECEIVING A CALL

When the phone is receiving a call, a ring tone will be heard on the Car Kit.

1. Press the multi-function button once to answer the call. Pressing the button again will hang-up and terminate the call.

2. If you wish to answer the call on the cellular phone, just press ok key and audio will be heard on the phone. Pressing the multi-function button will transfer the audio to the Car Kit.

3. To terminate the call, press the multi-function button again.

d. MAKING A CALL with the Car Kit on

Normal dialing

1. Enter the contact number and press OK. Sound is automatically transferred to the

Car Kit.

2. Press the multi-function button to hang-up and terminate the call.

Voice dialing

Refer to step f and g for the procedure when activating and recording for voice dialing.

1. Press the multi-function button once to activate the voice dialing. Sound is

automatically transferred to the Car Kit.

2. A beep will then be heard on the Car Kit prompting the user to say the name of

the person to call.

3. Say the name. The name will be played back to you. The phone will then place

the call automatically. In case the cell phone does not recognize the name spoken, the steps above may be repeated.

4. Press the button again to terminate the call.

e. AUDIO TRANSFER

Audio Transfer can be done by pressing the multi-function button or accessing the cell phone’s menu during ongoing calls.

f. ACTIVATING THE VOICE DIALING

Use your phone when recording for the voice dialing. Before voice dialing, you must first turn on the name dialing function and record your voice. To turn voice dialing on:

1. On the Applications window (flip open mode), tap Phone.

2. Tap Edit then tap Preferences. A list of features will appear.

3. Tap Voice Control then tap the box aligned to Voice dialing to check and activate the voice dialing feature. Tap the box aligned to Play caller name so that the name will be played back to you.

4. Tap Done on the on screen button when finished.

5. On the Preferences mode, tap Done again.

6. Tap to exit and return to the Applications mode.

g. RECORDING FOR VOICE DIALING

The voice dialing feature is only applicable to contacts saved to phone memory.

1. On the Applications window (flip open mode), tap Contacts.

2. Tap the contact where you want to add a voice dialing feature. Tap Edit. Scroll to Edit

Contact. Tap on the on-screen buttons.

3. Tap Record. Speak after tone will be displayed on the screen.

4. Record your voice. To check if your recording is of good quality, tap Play. If not, tap

Record again. Press Done when finished.

5. Tap to make another record and repeat the steps above. To return to the

Applications window, tap button.

Note: Noisy environment may affect voice recognition. Record your voice in a quiet environment.

USING WITH SONY ERICSSON T610

a. ACTIVATING THE BLUETOOTH

You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices.

1. Go to Menu by pressing the joystick. Scroll to Connectivity, SELECT. Select Bluetooth, SELECT. Turn On, SELECT.

2. Continue pressing to exit.

b. PAIRING TO THE CELLULAR PHONE

1. Bring the cellular phone at about 20 cm from the Car Kit.

3. Go to Menu by pressing the joystick. Scroll to Connectivity, SELECT. Select Bluetooth, SELECT.

4. Scroll to My devices, SELECT. New device, ADD. The phone is now searching for pairable devices to be added. Select the device you want to pair with your cell phone.

Press SELECT.

5. Enter “0000” as the passkey then press OK. If the pairing is successful, the alternating red/blue lights will stop.

6. Continue pressing to exit.

The unit is now ready to link calls from the phone directly to the Car Kit. An icon will appear during the standby mode indicating that the Car Kit is linked with the phone.

c. ANSWERING/RECEIVING A CALL

When the phone is receiving a call, a ring tone will be heard on the Car Kit.

1. Just press the multi-function button down once to answer the call. Pressing the button again will hang-up and terminate the call.

2. If you wish to answer a call on the cellular phone, just press YES and the call is automatically transferred to the phone. Pressing the multi-function button transfers the call on the Car Kit.

3. To terminate the call, press the multi-function button again.

d. MAKING A CALL with the Car Kit on

Normal dialing

1. Enter the contact number and press CALL button. Audio is automatically

transferred to the Car Kit.

2. Press the multi-function button to hang-up and terminate the call.

Voice dialing

Refer to step g and h for the procedure when activating and recording for voice dialing.

1. Press the multi-function button once to activate the voice dialing.

2. A beep will then be heard on the Car Kit prompting the user to say the name of

the person to call.

3. Say the name. The name will be played back to you. The phone will then place

the call automatically. In case the cell phone does not recognize the name spoken, the steps above may be repeated.

4. Press the multi-function button again to terminate the call.

Redialing

Press quickly the multi-function button twice to redial the last number.

e. AUDIO TRANSFER

Audio Transfer can be done by pressing the multi-function button or accessing the cell phone’s menu during ongoing calls.

f. REJECTING A CALL

Press the multi-function button twice to reject the incoming call.

g. ACTIVATING THE VOICE DIALING

Use your phone when recording for the voice dialing. Before voice dialing, you must first turn on the name dialing function and record your voice. To turn voice dialing on and record number types:

1. Go to Menu by pressing the joystick. Scroll to Settings, SELECT. Voice control,

SELECT. Voice dialing, SELECT.

2. Choose On, SELECT.

3. Continue pressing to exit.

h. RECORDING FOR VOICE DIALING

1. Go to Menu by pressing the joystick. Scroll to Settings and press SELECT. Choose Voice control, SELECT then go to Voice dialing, SELECT. Edit names, SELECT. New voice, ADD.

2. Find a contact then press SELECT.

3. Follow the instructions that are displayed. Voice is automatically saved on the phone. An icon will appear next to a contact name which has a voice command.

4. Continue pressing to exit.

Note: Noisy environment may affect voice recognition. Record your voice in a quiet environment.

USING WITH SONY ERICSSON T628

a. ACTIVATING THE BLUE TOOTH

You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices.

1. Go to Menu by pressing the joystick. Scroll to Connectivity, SELECT. Select Bluetooth, SELECT. Turn On, SELECT.

2. Continue pressing to exit.

b. SETTING TO LOW POWER MODE

1. Press Menu Key. Scroll to Connectivity, SELECT. Bluetooth, SELECT.

2. Scroll to Handsfree, SELECT. Choose Car handsfree, SELECT.

3. Choose Power Save, SELECT.

4. Continue pressing to exit.

c. PAIRING TO THE CELLULAR PHONE

1. Bring the cellular phone at about 20 cm from the Car Kit.

3. Go to Menu by pressing the joystick. Scroll to Connectivity, SELECT. Select Bluetooth, SELECT.

4. Scroll to My devices, SELECT. New device, ADD. The phone is now searching for pairable devices to be added. Select the device you want to pair with your cell phone.

Press SELECT.

5. Enter “0000” as the passkey then press OK. If the pairing is successful, the alternating red/blue lights will stop.

6. Continue pressing to exit from Menu.

The unit is now ready to link calls from the phone directly to the Car Kit. An icon, will appear during the standby mode indicating that the Car Kit is linked with the phone.

d. ANSWERING/RECEIVING A CALL

When the phone is receiving a call, a ring tone will be heard on the Car Kit.

1. Just press the multi-function button down once to answer the call. Pressing the button again will hang-up and terminate the call.

2. If you wish to answer a call on the cellular phone, just press YES and audio will be heard on the phone. Pressing the multi-function button will transfer the call on the Car Kit.

3. To terminate the call, press the multi-function button again.

e. MAKING A CALL with the Car Kit on

Normal dialing

1. Enter the contact number and press CALL button. Audio is automatically

transferred to the Car Kit.

2. Press the multi-function button to hang-up and terminate the call.

Voice dialing

Refer to step g and h for the procedure when activating and recording for voice dialing.

1. Press the multi-function button once to activate the voice dialing.

2. A beep will then be heard on the Car Kit prompting the user to say the name of

the person to call.

3. Say the name. The name will be played back to you. The phone will then place

the call automatically. In case the cell phone does not recognize the name spoken, the steps above may be repeated.

4. Press the multi-function button again to terminate the call.

f. AUDIO TRANSFER

Audio Transfer can be done by pressing the multi-function button or accessing the cell phone’s menu during ongoing calls.

g. ACTIVATING THE VOICE DIALING

Use your phone when recording for voice dialing. Before voice dialing, you must first turn on the name dialing function and record your voice. To turn voice dialing on and record number types:

1. Go to Menu by pressing the joystick. Scroll to Settings, SELECT. Voice control, SELECT. Voice dialing, SELECT.

2. Choose On, SELECT.

3. Continue pressing to exit.

h. RECORDING FOR VOICE DIALING

1. Go to Menu by pressing the joystick. Scroll to Settings and press SELECT. Choose Voice control, SELECT then go to Voice dialing, SELECT. Edit names, SELECT. New voice, ADD.

2. Find a contact then press SELECT.

3. Follow the instructions that are displayed. Voice is automatically saved on the phone. An icon will appear next to a contact name which has a voice command.

4. Continue pressing to exit.

Note: Noisy environment may affect voice recognition. Record your voice in a quiet environment.

+ 32 hidden pages