Sony 560TVL User Manual

Ultimate Sensitivity

Ultra Clear Image 560TVL

SALES NETWORK

•

SAMSUNG TECHWIN CO., LTD.

145-3, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, 462-120, Korea
TEL : [phone]~8158 FAX : [phone]

•

SAMSUNG OPTO-ELECTRONICS UK, LTD.

Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Surrey KT16 OPS
TEL : [phone] FAX : [phone]

www.samsungtechwin.com
www.samsungcctv.com

P/No. : Z6806085401B

VAN 08. 02

Super Vision at Ultra Low Light SHC-745

User’s Manual

Thank you for purchasing a SAMSUNG CCD CAMERA.
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.

ENGLISH

Before operating the camera, confirm the camera model and proper input
power voltage. In order to that you can understand this manual thoroughly,
we'll introduce our model description.

■ SHC-745 SERIES

• NTSC MODELS • PAL MODELS
SHC-745N SHC-745P

SHC-745PH

■ MODEL DESCRIPTION

• SHC-745X X

__

POWER SOURCE

SIGNAL SYSTEM

• SIGNAL SYSTEM
N --> NTSC MODEL
P --> PAL MODEL

• POWER SOURCE

--> DC12V/AC24V

H --> AC 230V~

The lightning flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.

INFORMATION -This equipment has been tested and found to comply with limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.

WARNING : Changes or modifications not expressly approved by the manufacturer

WARNING : To prevent electric shock and risk of fire hazards:

could void the user’s authority to operate the equipment.

Do NOT use power sources other than that specified.

Do NOT expose this appliance to rain or moisture.

This installation should be made by a qualified service person and

should conform to all local codes.

Contents

Features

Precautions

Components and Accessories

Overview

Front View
Side View
Bottom View
Rear View

Installation Procedures

Lens

• When Using Auto Iris Lens

• When Using C/CS Mount Lens
Connecting a Monitor
Connecting Power
Control via RS-485 Interface

6

8

10

11

11
12
13
14

15

15

19
20

21

How to Use the Camera

Function Menu Structure
How to Set up the Functions

LENS
EXPOSURE
WHITE BALANCE
BACKLIGHT
SSNR
DAY/NIGHT
IMAGE ADJ
SPECIAL
EXIT

Troubleshooting

Specifications

22

22
23

24
26
28
29
31
32
34
36
41

42

44

Features

Ultra High Resolution

By adopting a diagonal 8mm(1/3 ) 410,000 pixel
ExView Sony CCD, the camera produces clear picture
quality with a horizontal resolution of 560 TV lines for
color, and 700 TV lines for B/W.

BLC

By adopting a proprietary SV-IV DSP chip, the camera
delivers clear, high quality pictures even in backlight, by
increasing exposure in dark areas while decreasing it in
bright areas; a corrected image with clear details results.

Excellent Sensitivity

By adopting a diagonal 8mm(1/3 ) highly senstive CCD, and
digital signal processing technology, it can clearly
distinguish the outline and color of a subject in an
extremely low luminance environment – even, for example,
under starlight. Since surveillance is possible in places
where the light is poor, the camera is appropriate for day and
night surveillance outdoors or on the outside of buildings.

-

0.05 Lux(Color) / 0.00019 Lux(Color Sens-Up Mode)

- 0.006 Lux(B/W)

SSNR (Samsung Super Noise
Reduction) Function

The high performance SV-IV DSP chip dramatically reduces
the gain noise in digital image processing, producing clear,
sharp images in low lighting environments.

Day & Night

The camera identifies whether it is day or night and
automatically switches to the appropriate mode, depending
on its environment. By day, the camera switches to color
mode in order to maintain optimal color. At night, it switches
to B/W mode so as to obtain better picture definition.

Motion Detection

Since the camera detects motion and generates
signals without any additional external sensors, you
can monitor activity more efficiently by connecting the
camera to an alarm device.

DIS (Digital Image Stabilizer)

The DIS function compensates for any camera
movement, to produce more stable pictures.

Video/DC Drive Lens Support

You can select Video or DC Drive Lens from the menu.

Miscellaneous Functions

HLC(High Light Compensation), SYNC (INT/LL),
SENS-UP, FREEZE, FLIP (H/V-REV), D-ZOOM,
SHARPNESS, MOTION DETECTION and PRIVACY
functions are provided.

RS-485 Communication
Control Support

Remote OSD menu control via an RS-485 interface is
supported.

OSD

The camera control is convenient by using 7 different
foreign language O.S.D.

- NTSC : English, Spanish, Japanese

- PAL : Korean, English, French, German, Spanish,
Italian, Chinese

Samsung Techwin cares for the environment at all product manufacturing
stages to preserve the environment, and is taking a number of steps to
provide customers with more environment-friendly products.The Eco mark
represents Samsung Techwin s will to create environment-friendly products,
and indicates that the product satisfies the EU RoHS Directive.

Warnings & Cautions

This information is provided to ensure your safety and to prevent any losses, financial
or otherwise. Please read it carefully and use the product accordingly.

* For product inquiries, please contact the retail shop where you bought the camera. The use of equipment such

as an aerial ladder while providing after-sales service shall be at your expense.
* Separate the power plug when thunder crashes or lighting flashes.
* This product is support equipment for surveillance system. Therefore, we can't compensate for material loss

and/or personal injuries by robbery, fire, natural disaster or something like this type.

Warning/Attention/Special Mark Messages

Ignoring this information may
result in material loss and/or
serious personal injuries including
death.

Indicates “Never Allowed.”

Ignoring this information may
result in material loss and/or a
slight injuries.

Indicates “No Disassembling.”

COLOR CCD CAMERA User’s Manual

6

COLOR CCD CAMERA User’s Manual

7

Precautions

Do not install under extreme
temperature conditions.

Use only under temperature conditions
between -10˚C and +50˚C. Provide good
ventilation when using in high temperature
conditions.

Do not install under unstable
lighting conditions.

Severe lighting changes or flickering may
hinder normal camera operation.

Do not install in high humidity
environment.

May lower image quality.

Avoid touching the camera lens.

The lens is the most important component
of the camera. Be careful not to smear it
with fingerprints.

Do not drop the camera or
subject it to physical shock.

May cause a product malfunction.

Do not expose the camera to
rain or other types of liquids.

Wipe dry any liquids. Liquids may contain
minerals that are corrosive to electronic

Never keep the camera face to
strong light directly.

May damage the CCD.

Do not expose the camera to
radioactivity.

Radioactivity exposure may damage the
CCD.

components.

Notes

• Exposure to a spotlight or an object emitting strong light may cause smear or
blooming.

• Ensure that the power source complies with normal specifications before
supplying it to the camera.

COLOR CCD CAMERACOLOR CCD CAMERA User’s ManualUser’s Manual

98

1. Ultra Low Light
Color CCD Camera SHC-745

2. Auto Iris Lens Connector Plug

OverviewComponents and Accessories

Front View

3. C-Mount Adapter

4. Instruction Manual

Tripod Mounting Bracket Screw Hole

Used to fix the Tripod Mounting Bracket to the top of the camera.

C-Mount Lens Adapter

Install this adapter to use a C-Mount Lens.

Back Focus Control Lever

Adjust focus by this Back Focus Lever.

COLOR CCD CAMERACOLOR CCD CAMERA User’s ManualUser’s Manual

1110

Overview

L

Side View

Auto Iris Lens Connector

Used to connect Auto Iris Lens plug.

Bottom View

Tripod Mounting Bracket Screw Hole

Used to fix the camera on a bracket or tripod.
The screw sizes for this hole are as follows:

You can separate the Tripod Mounting Bracket and
install it on the top or bottom of the camera.
Make sure to use the Tripod Mounting Bracket when
fixing the camera to a bracket or tripod. Otherwise the
camera may not be secure, or the internal circuitry of
the camera may be damaged.

COLOR CCD CAMERACOLOR CCD CAMERA User’s ManualUser’s Manual

1312

1/4"-20 UNC (20 THREAD)
L:4.5mm±0.2mm (ISO standard),
or 0.197" (ASA standard)

Overview

Installation Procedures

Rear View

*High Voltage Type

Function Setup Button

SET Button : Displays the menu on the screen. Press this button to confirm

Up and Down Button : Used to move the cursor up or down in the menu

Left and Right Button : Used to move the cursor left or right in the menu

D & N Input Port

You can switch to Day & Night Mode by connecting an external signal to this port.

MD Output Port

Motion detection signals are output through this port.

RS-485 Control Port

You can control SETUP MENU through this port by using external controllers like a

status or after changing a selected item.

screen to select a desired menu item.

screen or to change the value of the selected item.

Remote controller that RS-485 Communication is supported. For details, see page 21.

Video OUT Port

Video signals are output through this port. Connect this port to the Video IN port of a monitor.

Power LED

When power is properly connected, this LED comes on.

Power IN Port

Connect the power as specified for each model here.

(SHC-745PH)

Lens

The lens is not supplied with this camera. Purchase a lens suitable for your
environment. This camera accepts the auto iris lens and both C-and CS-mount lens.

Notes

• It is recommended to use the DC type Auto Iris Lens to effectively enjoy the major
functions of this camera.

• Keep the lens surface clean, since if it is contaminated with dirt or fingerprints the
picture quality suffers.

When Using Auto Iris Lens

1. Strip the insulation of the auto iris lens cable 8mm from the end.

approx. 8mm

2. Strip the insulation of the core of the auto iris lens cable to expose a 2mm length.

approx. 2mm

COLOR CCD CAMERACOLOR CCD CAMERA User’s ManualUser’s Manual

1514

Installation Procedures

3. Remove the cover of the auto iris lens connector plug and solder the lens cable to
the connector pin of the plug.

• For a Video Drive Lens

Pin 1: Red (Power)
Pin 2: NC
Pin 3: White (Video Signal)
Pin 4: Black (Ground)

No. 3 Pin

No. 1 Pin

No. 4 Pin

No. 2 Pin

• For a DC Drive Lens

Pin 1: Damping ­Pin 2: Damping +
Pin 3: Drive +
Pin 4: Drive -

Lens cable

connector

4. Fit the cover of the auto iris lens connector
plug, remove the protective glass cover
from the front of the camera, and fasten
the auto iris lens by turning it clockwise.

5. Set focus of camera using Back Focus Control
Lever of camera side after combining Auto
Iris lens.

Back Focus Control Lever

When Using C/CS Mount Lens

Before installing a lens, identify whether the lens to be installed is a C-Mount or CS-Mount.
This camera is set for a CS-Mount Lens by default. To install a C-Mount Lens, a
simple modification is required.

• When Using a CS Mount Lens

Remove the protective glass cover at the front of this product and turn the CS­Mount Lens clockwise to install it. And set focus of camera using Back Focus
Control Lever of camera side after combining CS-Mount lens.

Notes

• Use the lens connector shown in the following figure. If the dimensions of the
connector are not correct, it may damage the camera, or the lens may not be
installed firmly.

C-Mount Lens: 10mm or less
CS-Mount Lens: 5mm or less

• If the lens is too heavy, the camera becomes unbalanced and there may be
problems. Use a lens that weighs less than 450g.

• When adjusting the Automatic Level Control (ALC) of an auto iris lens, use Av
mode if available. If you use the Pk mode, the picture brightness may change
continuously.

COLOR CCD CAMERACOLOR CCD CAMERA User’s ManualUser’s Manual

1716

Installation Procedures

• When Using a C Mount Lens

1. Remove the protective glass cover at the front of this product and turn the C­Mount Adapter clockwise to install it.

2. Turn the C-Mount lens clockwise to install it.

3. Set focus of camera using Back Focus Control Lever of camera side after combining
C-Mount lens.

Connecting a Monitor

Connect the Video OUT port on the rear panel of the camera to a monitor.

CCD Camera

• Since the connection procedure may differ depending on the type of monitor or
peripheral device to be connected, refer to the User Manual for the device to be
connected.

• Make sure to turn off the device to be connected before making any connections.

• Turn the 75
the switches of any final device to the 75Ω position.

/Hi-Z switches of interim display devices to the Hi-Z position, and

Intermediate End monitor

CCD Camera

Monitor

COLOR CCD CAMERACOLOR CCD CAMERA User’s ManualUser’s Manual

1918

Installation Procedures

Connecting Power

Since power specifications differ depending on the model, make sure to check your
model name and specifications before connecting power.
You can connect power as shown in the following figure.

For AC / DC power

• Since the power specification supports
both AC and DC, connect AC 24V,
500mA Adaptor or DC 12V, 500mA
Adaptor.

High Voltage Type (AC230V, 50Hz)

• Use AC230V, 50Hz power source For
SHC-745PH.

When the resistance value of copper wire is at [20°C(68°F)]

Copper wire size(AWG) #24(0.22mm2) #22(0.33mm2) #20(0.52mm2) #18(0.83mm2)

Resistance value(Ω/m) 0.078 0.050 0.030 0.018

Voltage drop(V/m) 0.028 0.018 0.011 0.006

• As shown in the table above, voltage decreases as the wire gets longer.
Therefore use of an excessively long adaptor output line for connection to the
camera may affect the performance of the camera.

Standard voltage for camera operation : DC 12V±10%, AC 24V±10%
There may be some deviation in voltage drop depending on the type of wire and the manufacturer.

Control via RS-485 Interface

The camera can be controlled by using external controllers like a Remote controller.
(RS-485 Communication)

(1) To control by PC

Connect the RS-485 control port of the camera and the serial cable through an
RS-485 converter.
Example) PC Serial Port (COM1)

RS-485 Control Port

(2) To control using a DVR or System Controller

Connect the RS-485 cable (TRX+, TRX-) to the connection port of the 485 control
board that is connected to the DVR or System Controller.

485 Control Board Connection Port RS-485 Control Port

(+) CONNECTION TERMINAL (TRX+) 485+
(

-)CONNECTION TERMINAL (TRX-) 485-

* RS-485 Communication establishment initial value

Camera ID BAUD RATE UART MODE RET PKT

Item

Initial value

Notes

• To control the camera by constructing an additional controller, use Pelco-D
protocol or STW protocol (Samsung Techwin protocol).

1 9600 8-NONE-1 ENABLE

Serial Cable RS-485 Converter Camera

COLOR CCD CAMERA User’s Manual

20

COLOR CCD CAMERA User’s Manual

21

How to Use the Camera

Function Menu Structure How to Set up the Functions

Setup Menu

LENS • DC • VIDEO • MANUAL

EXPOSURE • SHUTTER • AGC • SENS-UP

• RETURN

WHITE BALANCE • ATW • MANUAL • AWC

• OUTDOOR • INDOOR

BACKLIGHT • OFF • BLC • HLC

SSNR • ON • OFF

DAY/NIGHT • COLOR • B/W • AUTO

• EXTERN

IMAGE ADJUSTMENT • FREEZ • V-REV • H-REV

(IMAGE ADJ.) • D-ZOOM • SHARPNESS

• RETURN

SPECIAL • CAMTITLE • SYNC • MOTION DET

• PRIVACY • DIS • COMM ADJ

• LANGUAGE • RESET • RETURN

EXIT

SET

You can set up functions using the 5 buttons on the rear of the camera.

UP button
SET button

LEFT button

DOWN button
RIGHT button

1. Press the SET button.

• Main setup menu is displayed on the monitor screen.

MAIN SETUP

1.LENS DC

2.EXPOSURE

3.WHITE BAL ATW

4.BACKLIGHT OFF

5.SSNR ON

6.DAY/NIGHT AUTO

7.IMAGE ADJ

8.SPECIAL

9.EXIT

2. Select a desired function using the Up and Down buttons.

• Place the cursor over a desired item.

COLOR CCD CAMERA User’s Manual

22

COLOR CCD CAMERA User’s Manual

23

How to Use the Camera

Select the function using
the UP or DOWN button.

MAIN SETUP

1.LENS DC

2.EXPOSURE

3.WHITE BAL ATW

4.BACKLIGHT OFF

5.SSNR ON

6.DAY/NIGHT AUTO

7.IMAGE ADJ

8.SPECIAL

9.EXIT

Change the status using
the LEFT or RIGHT button.

3. Set up a selected item by using the Left and Right buttons.

4. To finish the setting, select ‘EXIT’ and press the SET button.

Notes

• An item with the icon also has sub menus. To select a sub menu, select an
item with the icon and press the SET button.

• An item with the - - - icon is unavailable due to function settings.

LENS

Using this function, you can control screen brightness.

1. When the SETUP menu screen is displayed, select LENS by using the Up and
Down buttons so that the arrow indicates

2. Select the connected lens type by using the Left and Right buttons.

MAIN SETUP

1.LENS DC

2.EXPOSURE

3.WHITE BAL ATW

LENS .

DC/Video : Select Auto Iris Lens

• When DC is selected, you can control screen brightness. The range of
brightness control is between 1 and 70. Adjust the brightness appropriately
for optimal screen brightness.

Notes

• Some lenses may not work properly, depending on the setting of the
BRIGHTNESS LEVEL.

• When Using a Video-Type Auto Iris Lens

Adjust the ALC adjustment terminal on the lens appropriately. In general, set
it to AV (Average).
It may not work properly depending on the installed lens. Set the Level VR of
the lens to the optimal value.
Set AGC to OFF and adjust the Lens VR to an appropriate brightness.
Adjust the Lens VR, adjust the BRIGHTNESS, and then check if the screen
brightness changes properly. Otherwise, adjust the Lens VR again.

Manual : Select Manual Lens

COLOR CCD CAMERA User’s Manual

24

COLOR CCD CAMERA User’s Manual

25

How to Use the Camera

EXPOSURE

MAIN SETUP

1.LENS DC

2.EXPOSURE

3.WHITE BAL ATW

4.BACKLIGHT OFF

5.SSNR ON

6.DAY/NIGHT AUTO

7.IMAGE ADJ

8.SPECIAL

9.EXIT

1. When the SETUP menu screen is displayed, select EXPOSURE by using the Up
and Down buttons so that the arrow indicates EXPOSURE .

2. Select a desired mode using the Up and Down buttons.

SHUTTER : You can select either auto or manual shutter.

- A.FLK : Select this when you experience picture flicker, which can happen when
there is a clash with the frequency of the installed lighting.

- ESC : Select this to control the shutter speed automatically. If ESC is selected, the

shutter speed is automatically controlled depending on the ambient
illumination of the subject.

- MANUAL : You can control shutter speed manually.

Notes

• When the SHUTTER is set to ESC after selecting the Internal Synchronization
Type, the picture may become unstable if the camera faces a bright fluorescent
light. Therefore, take care when choosing the installation position.

• ESC and MANUAL modes are only available together when the lens is set to
MANUAL.

• When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.

AGC (AUTO GAIN CONTROL):

The higher the gain level, the brighter the screen - but the higher the noise.

- OFF : Deactivates the AGC function.

- LOW : Allows automatic gain control from 0 to 30dB.

- HIGH : Allows automatic gain control from 0 to 42dB.

SENS-UP :
When it is night or dark, the camera
automatically detects the light level and
maintains a clear picture if this mode is
activated.

- OFF : Deactivates the SENS-UP function.

- AUTO : Activates the SENS-UP function.

RETURN :
Select this to save the changes in the EXPOSURE menu and return to the SETUP menu.

Notes

• If you press the SET button in ‘AUTO’ mode, You can adjust brightness by
increasing or decreasing the shutter speed. (X2~X256)

• Note that the higher the zoom level, the brighter the screen, but the more likely it
is that an after-image will appear.

• Although Noise, Spots, and Whitish symptoms may occur in SENS-UP operation
when the zoom level is increased, this is normal.

COLOR CCD CAMERA User’s Manual

26

COLOR CCD CAMERA User’s Manual

27

How to Use the Camera

White Balance (White Bal.)

Use the White Balance function to adjust the screen color.

1. When the SETUP menu screen is displayed, select ‘White Bal.’ by using the Up
and Down buttons so that the arrow indicates ‘White Bal.’ .

2. Select a desired mode using the Up and Down buttons.

MAIN SETUP

1.LENS DC

2.EXPOSURE

3.WHITE BAL ATW

4.BACKLIGHT OFF

5.SSNR ON

Select one of the following 5 modes, as appropriate for your purpose.

ATW : Select this when the color temperature is between 1800˚K and 10500˚K
INDOOR :

Select this when the color temperature is between 4500˚K and 8500˚K.

OUTDOOR : Select this when the color temperature is between 1800˚K and

AWC SET :

MANUAL :

10500˚K. (sodium light inclusion)

To find the optimal setting for the current luminance environment in
this mode, set the point the camera towards a sheet of white paper
and press the SET button. If the environment changes, readjust it.

Select this to fine-tune White Balance manually. Set White Balance
first by using the ATW or AWC mode. After that switch to MANUAL
mode, fine-tune the White Balance and then press the SET button.

Notes

• White Balance may not work properly under the following conditions. In this case
select the AWC mode.

When the color temperature of environment surrounding the subject is out of the
control range (e.g. clear sky, or sunset)

When the ambient illumination of the subject is dim.
If the camera is directed towards a fluorescent light or is installed in a place

where illumination changes dramatically, the White Balance operation may
become unstable.

BACKLIGHT

This camera is designed so that it delivers a distinctive subject and background at
the same time, even when the subject is in backlight, unlike conventional cameras,
by adopting a proprietary SV-IV DSP chip.

1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Up
and Down buttons so that the arrow indicates

MAIN SETUP

1.LENS DC

2.EXPOSURE

3.WHITE BAL ATW

4.BACKLIGHT OFF

5.SSNR ON

6.DAY/NIGHT AUTO

7.IMAGE ADJ

8.SPECIAL

9.EXIT

2. Select a desired mode using the Left and Right buttons depending on the camera purpose.

BACKLIGHT .

COLOR CCD CAMERA User’s Manual

28

COLOR CCD CAMERA User’s Manual

29

How to Use the Camera

BLC : Enables a user to directly select a desired area from a picture, and to view

the area more clearly.

BLC ON

HLC (High Light Compensation) :
If there is a high light installed in a limited environment such as an apartment

BLC OFF

parking garage or gas station entrance, removing the high light makes it possible
to view car license plates efficiently.

- DAY : In normal daylight conditions, the HLC is not activated.

- NIGHT : If a high light that is larger than a certain size is present on the
screen, remove the high light to see license plates clearly.

HLC MASKING AREA

HLC ON HLC OFF

OFF : Not being used

3. Select a desired mode using the Left and Right
buttons and press the SET button.

Select ‘BLC’ to adjust the area to be enhanced
and enhancement level.

HLC : Enable a user to select a mask color of

high light area from a picture.

Notes

• Because there can be a difference in the effectiveness of HLC according to the
amount of light area in the screen, optimize the installation angle for the best HLC
performance.

• In a dark environment, the HLC is only activated when a high light that is larger
than a certain area is present.

• The HLC is not activated in light or overly dark conditions.

SSNR

This function reduces the background noise in a low luminance environment.

1. When the SETUP menu screen is displayed, select ’SSNR’ by using the Up and
Down buttons so that the arrow indicates ’SSNR’ .

MAIN SETUP

1.LENS DC

2.EXPOSURE

3.WHITE BAL ATW

4.BACKLIGHT OFF

5.SSNR ON

6.DAY/NIGHT AUTO

2. Select a desired mode using the Left and Right buttons.

OFF : Deactivates SSNR. Noise is not reduced.
ON : Activates SSNR so that noise is reduced.

COLOR CCD CAMERA User’s Manual

30

COLOR CCD CAMERA User’s Manual

31

How to Use the Camera

3. Set the SSNR mode to ‘ON’ and press the SET button. Then you can adjust the
noise reduction level.

Notes

• You cannot set the SSNR to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE
menu is ‘OFF’.

• When adjusting the noise reduction level of the SSNR mode, remember that the
higher the level set, the more the noise level will be reduced but that after image
may also occur.

DAY/NIGHT

You can display pictures in color or black and white.

1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Up
and Down buttons so that the arrow indicates

MAIN SETUP

1.LENS DC

2.EXPOSURE

3.WHITE BAL ATW

4.BACKLIGHT OFF

5.SSNR ON

6.DAY/NIGHT AUTO

7.IMAGE ADJ

DAY/NIGHT .

2. Select a desired mode using the Left and Right buttons according to the picture
display you want.

COLOR : The picture is always displayed in color.
B/W : The picture is always displayed in black and white.
AUTO : The mode is switched to Color in a

normal environment, but switches to

B/W mode when ambient illumination
is low. To set up the sswitching time or
speed for AUTO mode, press the SET
button.

- DWELL TIME : You can select the duration time about changing the day/night
mode.

- DURATION : You can select brightness of illumination about changing the

5s, 7s, 10s, 15s, 20s, 30s, 40, 60s

day/night mode.

Color B/W B/W Color
Fast 2.5 lux 4 lux
Slow 0.8 lux 6 lux

* The brightness of illumination is changeable

by installed environment.

EXTERN : This mode allows you to apply a desired filter to external signals.

Notes

• When using a Video Auto Iris Lens, if you set the lens level to low, automatic
switching between Color and Black & White may not occur.

•

You cannot control the DAY/NIGHT menu when AGC in the EXPOSURE menu is ‘OFF’.
At this time, the exchange between DAY mode and NIGHT mode operates as like
selecting ‘COLOR’ mode.

• The OSD key does not work for 3 seconds when switching to Color or B/W, to
ensure stable camera operation.

The camera may focus less well under infrared illumination than under normal illumination.

•

• Since the camera may not focus as well under infrared illumination at night as it
does under normal illumination, install an Extra-low Dispersion Lens to obtain
sharp pictures.

COLOR CCD CAMERA User’s Manual

32

COLOR CCD CAMERA User’s Manual

33

How to Use the Camera

IMAGE ADJ.

1. When the SETUP menu screen is displayed, select ‘IMAGE ADJ.’ by using the Up
and Down buttons so that the arrow indicates

MAIN SETUP

1.LENS DC

2.EXPOSURE

3.WHITE BAL ATW

4.BACKLIGHT OFF

5.SSNR ON

6.DAY/NIGHT AUTO

7.IMAGE ADJ

8.SPECIAL

9.EXIT

2. Select a desired mode using the Up and Down buttons.

IMAGE SETUP

1. FREEZE OFF

2. V-REV OFF

3. H-REV OFF

4. D-ZOOM OFF

5. SHARPNESS ON

6. RETURN

FREEZE : You can view still or moving pictures.
V-REV : You can flip the picture vertically on the screen.
H-REV : You can flip the picture horizontally on the screen.

IMAGE ADJ.

D-ZOOM : You can use a digital zoom of x1~x10.

SHARPNESS : As you increase this value, the picture outline becomes stronger

and clearer. Adjust this value appropriately depending on the
sharpness of the picture.

RETURN : Select this to save the settings for the IMAGE ADJ. menu and to

return to the SETUP menu.

Notes

• When H-REV or V-REV is selected, any text in the picture also will be flipped
horizontally or vertically.

• If you increase the SHARPNESS level too high, the picture may become distorted
or noise may appear.

COLOR CCD CAMERA User’s Manual

34

COLOR CCD CAMERA User’s Manual

35

How to Use the Camera

SPECIAL

1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Up and
Down buttons so that the arrow indicates ‘SPECIAL’.

MAIN SETUP

1.LENS DC

2.EXPOSURE

3.WHITE BAL ATW

4.BACKLIGHT OFF

5.SSNR ON

6.DAY/NIGHT AUTO

7.IMAGE ADJ

8.SPECIAL

9.EXIT

2. Select a desired mode using the Up and Down buttons.

SPECIAL

1. CAM TITLE OFF

2. SYNC INT

3. MOTION DET OFF

4. PRIVACY OFF

5. DIS OFF

6. COMM ADJ

7. LANGUAGE ENGLISH

8. RESET

9. RETURN

CAM TITLE : If you enter a title, the title will appear on the monitor.

If the SPECIAL menu screen is displayed, use the Up and Down buttons so
that the arrow indicates ‘CAM TITLE’.

Set it to ‘ON’ by using the Left and Right buttons.

Notes

Notes

• When the CAM TITLE menu is ‘OFF’, no

• When the CAM TITLE menu is ‘OFF’, no
title will be displayed on the monitor

title will be displayed on the monitor
screen even if you enter one.

screen even if you enter one.

SPECIAL

1. CAM TITLE OFF

2. SYNC INT

3. MOTION DET OFF

4. PRIVACY OFF

5. DIS OFF

6. COMM ADJ

7. LANGUAGE ENGLISH

8. RESET

9. RETURN

Press the SET button.

Camera ID

ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz

-.123456789

CLR POS END

Use the 4 direction buttons to move to a desired letter and select the letter by
pressing the SET button. Repeat this to enter multiple letters.
You can enter up to 15 letters.

Notes

• If you move the cursor to CLR and press the SET button, all the letters are
deleted. To edit a letter, change the cursor to the bottom left arrow and press the
SET button. Move the cursor over the letter to be edited, move the cursor to the
letter to be inserted and then press the SET button.

COLOR CCD CAMERA User’s Manual

36

COLOR CCD CAMERA User’s Manual

37

How to Use the Camera

to Locate, then SETto Locate, then SETto Locate, then SET

Enter a title, move the cursor to ’POS’ and
press the SET button. The entered title

FRONT DOOR

appears on the screen. Select the position to
display the title on the screen by using the 4
direction buttons and press the SET button.
When the position is determined, select
’END’ and press the SET button to return to
the SPECIAL menu.

SYNC :

In areas where the supply is at 60Hz, you can
synchronize the output phase of multiple
cameras using the power synchronization
function (Line-Lock) without using a
synchronization signal generator.

- INT : Internal Synchronization Type

- L/L : Power Synchronization Type, Line-lock

• Press the SET button.

• You can select a desired phase from 0 to 359 when select 'phase'.

• You can decide the synchronization between luminance and color signal when
select the 'mode'.

Notes

•

When using AC power at 60Hz frequency, you can use the L/L type synchronization.

• When the power is DC 12V, the SYNC. menu is fixed to the ‘INT’ mode.

MOTION DET:
If you connect an alarm device to this camera, you
can monitor activity more efficiently, because a
signal is generated by the camera whenever
motion is detected. The motion detection signal is
output through the MD OUT port.

When the SPECIAL menu screen is displayed, press the Up and Down buttons
so that the arrow indicates

MOTION DET .

Set up the mode using the 4 direction buttons.

- SENSITIVITY : You can select up to 8 MD areas.When SENSITIVITY number is high,
motion detection sensitivity is increased to recognize even small movement.

- AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.

- SEL POS : Determines which of the 4 vertices of each MD area is to be used.

- YPOS : Determines the coordinate of the vertical axis for SEL POS.

- XPOS : Determines the coordinate of the horizontal axis for SEL POS.

- FILL

SET : Fills in a selected MD area. Fills in a selected MD area. The color of filling is

sequentially selected as brown, orange, blue, cyan, yellowish green, yellow
and red.

- RETURN : Select this to save the MOTION DET menu settings and return to the SPECIAL

menu.

Notes

•

MD areas show only MOTION DET menu. Therefore, MD areas don’t display on the
monitor screen.

PRIVACY : Hide an area you want to hide on the

screen.

When the SPECIAL menu screen is displayed,
press the Up and Down buttons so that the
arrow indicates ‘PRIVACY’.

Set up the mode using the 4 direction buttons.

- AREA SEL : You can select up to 8 MD areas.

- AREA MODE :
Determines whether to use the area selected in
the AREA SEL, and the size and position of the
area.

COLOR CCD CAMERA User’s Manual

38

COLOR CCD CAMERA User’s Manual

39

How to Use the Camera

- MASK COLOR : Determine area color. You can select Gray, Green, Red, Blue, Black,
White.

- TRANSP : Determine the transparency of selected area as controlling number from 0 to 3.

- RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL

menu.

DIS (Digital Image Stabilizer) :

This function mitigates any picture movement due to external factors such as wind.

Notes

•

The chance of resolution decrease is existed because DIS function uses the digital zoom.

•

DIS doesn’t operate when background illumination is too low.

•

DIS doesn’t operate when object pattern is monotonic as like sky or white wall.

COMM ADJ (Communication Adjustment) :

This function sets up the camera communication status when controlling the
camera through an external control device.

When the SPECIAL menu screen is displayed, press the Up and Down buttons
so that the arrow indicates ‘COMM ADJ’.

Set up the mode using the 4 direction buttons.

- CAM ID : Determines the camera's identification number (between 0 and 25).

- BAUD RATE : You can select 2400/4800/9600/19200/38400/57600 bps.

- UART MODE : You can select NONE, EVEN or ODD for the parity bits.

- RET PKT : Determines whether to send a command back to the controller device
when a communication control command is sent to the camera.

- DISP CAM ID : Display camera title on top left corner of the screen.

LANGUAGE : You can select the menu language according to your requirements.

RESET : Resets the camera settings to the factory defaults.

RETURN : Select this to save the SPECIAL menu settings and return to the SPECIAL

menu.

EXIT

Press the SET button in the EXIT menu to save the current settings and exit the SET menu.

COLOR CCD CAMERA User’s Manual

40

COLOR CCD CAMERA User’s Manual

41

Troubleshooting

If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an authorized
technician.

Problem

Nothing appears on
the screen.

• Check that the power cord and line connection
between the camera and monitor are fixed properly.

Solution

• Check that you have properly connected VIDEO
cable to the camera VIDEO output jack.

• Check that the lens type is VIDEO lens or DC lens.

The image on the
screen is dim.

• Is lens stained with dirt? Clean your lens with soft,
clean cloth.

• Set the monitor to proper condition.

• If the camera is exposed to too strong light, change
the camera position.

The image on the
screen is dark.

• Adjust the contrast feature of the monitor.

• If you have an intermediate device, set the 75Ω / Hi-z
properly.

The camera is not working
properly, and the surface
of the camera is hot.

The DAY/NIGHT menu
does not work.

The SENS-UP function
does not work.

• Check that you have properly connected the camera
to an appropriate power source.

• Check that AGC of EXPOSURE SETUP menu is
‘OFF’.

• Check that AGC of EXPOSURE SETUP menu is
‘OFF’.

• Check that SHUTTER of EXPOSURE SETUP menu is
‘A.FLK’ or ‘MANUAL’.

Problem

The Motion Detection
function does not
work.

Color is not correct.

The screen flickers
continually.

RS-485
communication fails.

Solution

• Check that MOTION DEF of SPECIAL SETUP menu
is ‘OFF’.

• Check the setting of WHITE BAL SETUP menu .

• Check that direction of camera turns toward the
Sun.

• Check the polarity between RS-485 Control Port
and RS-485 cable.

485 Control Board Connection Port RS-485 Control Port

(+) CONNECTION TERMINAL (TRX+) 485+
(- ) CONNECTION TERMINAL (TRX-) 485-

• Check the RS-485 Communication establishment
initial value

* RS-485 Communication establishment initial value

Item

Camera ID BAUD RATE UART MODE RET PKT

Initial value

1 9600 8-NONE-1 ENABLE

• We recommend that you make ground connect
between camera and controller in order to maintain
safety communication control.

COLOR CCD CAMERA User’s Manual

42

COLOR CCD CAMERA User’s Manual

43

Specifications

Input Voltage

POWER

Power Consumption
Size

CCD

Total Pixels
Effective Pixels
Scanning System
Synchronization

Sync

Frequency

O.S.D

Back-light Comp.
Resolution
S/N (Y signal)
Min. Illumination
White Balance
Electronic Shutter

E

Speed

L

Sens-up

E

Gain Control

C

SSNR

T
R

Motion Detection

I

PRIVACY

C

V-REV

A

H-REV

L

FREEZE
SHARPNESS
IRIS Control
Day & Night
DIS
Digital Zoom
Blemish Compensation

Communication

Lens Mount

Back Focus Adjustment
Operating temperature / Humidity
Storing Temperature / Humidity
Dimension(mm)
Weight

Horizontal : 15.734 KHz,

Vertical : 59.94 Hz

Korean, English, Japanese, Spanish

0.05 Lux (Color), 0.00019 Lux (Color Sens-Up Mode), 0.006 Lux (B/W)
ATW / AWC / Manual / Outdoor / Indoor (1800˚K ~10,500˚K)

1/60 ~ 1/120,000 sec 1/50 ~ 1/120,000 sec

RS-485 (2400, 4800, 9600, 19200, 38400, 57600 bps selectable)

SHC-745P SHC-745PHSHC-745N

AC24V / DC12V AC230V

Diagonal 8mm (1/2 ) Sony Exview HAD CCD

Color : 560 TV Lines

256 point (Even 128 Point, Odd 128 Point)

(STW Protocol, Pelco-D Protocol available)

(C Mount is mountable by using adaptor)

65.8(W)X60.6(H)X101.9(D) 65.8(W)X60.6(H)X115(D)

4.0W

811(H) X 508(V)
768(H) X 494(V)

2:1 Interlace

Internal / Line Lock

Horizontal : 15.625 KHz, Vertical : 50.00 Hz

English, French, Germany, Spanish,

Italy, Chinese

BLC/HLC/OFF

B/W : 700 TV Lines

52 dB (AGC Off, Weight ON)

AUTO / OFF (Selectable x2 ~ x256)

LOW / HIGH / OFF

ON / OFF (1~32 Level)

ON / OFF (8 Zone, ALARM Output)

ON/OFF (8 Zone)

ON / OFF
ON / OFF
ON / OFF

ON/OFF (Level Adjustable)

DC / Video

COLOR / Black& White/AUTO/EXT

ON / OFF

ON / OFF (x10)

CS Mount (Easy Focus type)

Manual

-10˚C to +50˚C / 30% to 80% RH

-20˚C to +60˚C / 20% to 90% RH

315g 535g

DECLARATION OF CONFORMITY

Application of Council Directive(s) 89 / 336 / EEC

Manufacturer's Name SAMSUNG TECHWIN CO., LTD

Manufacturer's Address SAMSUNG TECHWIN CO., LTD

42, SUNGJU-DONG CHANGWON-CITY,

KYUNGNAM, KOREA, 641-716

European Representative Name

European Representative Address

Equipment Type/Environment CCTV Camera

Model Name SHC-745

Beginning Serial NO. S7090001

Year of Manufacture 2008. 02. 01

Conformance to EN 50081-1 : 1992

EMC-Directive 89/336 EEC and 92/31/EEC

EN 50130-4 : 1996

We, the undersigned, hereby declare that the equipment specified above conforms

to the above Directive(s).

Manufacturer SAMSUNG TECHWIN CO., LTD

Signature Signature

Full Name HAN SEUG KIM Full Name

Position QUALITY CONTROL MANAGER Position

Place CHANGWON, KOREA Place

Date 2008. 02. 01 Date

Legal Representative in Europe

COLOR CCD CAMERA User’s Manual

44

MEMO