Sony 540TV Lines, 540TVL Instruction Manual

Eyeball IR Fixed Dome

540TV Lines

Super High Resolution Color Camera

INSTRUCTION MANUAL

Power sou rce
Power con sumptio n
Image sen sor
Number of p ixels
Scannin g system
Scannin g frequen cy
Sync. sys tem
Electro nic shutt er
Resolut ion
Min. illu minatio n

Video outp ut

Power in put

AGC

Lens moun t

2:1 interlace

15.734KHz(H) x 59.94Hz(V)
Internal

1/60 ~ 1/100,000 sec.

540 TV lines (Color)

1.0 lux(COLOR), 0 lux(BW at IR ON) @ F1.2, 50 IRE

More then 50dB (AGC off)

F3.6mm Fixed mount

752(H) x 582(V)

DC Jack

Fixed mount

540TVL (NTSC)

2.0 Watts (IR LED ON)

768(H) x 494(V)

MODEL

S/N ratio
BLC

White Bal ance

Power

15.625KHz(H) x 50Hz(V)

1/50 ~ 1/100,000 sec.

Lens

Connect or

&

etc.

540TVL (PAL)

Video out put

Operati ng Temperature

1.0 Vp-p (75 ohm, composite)

ATW

BNC Connector

]

-10°C ~ +50°C [14° F ~ 122° F

General

ON

Operati ng humidi ty

0 ~ 96% (non-condencing)

1/3" SONY Super HAD CCD

ON

Day / Night

Auto

IR LED / SENS OR
LED Light ing Dista nce

IR LED 24EA(850nm/70 degree),SENSOR 1EA

10M

* Use the power consumption 3W over.

Uni t: mm

EXTERNAL DIMENSION

2 3

540TV Lines
Super High Resolution Color Camera

PRINTED IN KOREA

50302650A

SPECIFICATIONS

Protect ionType

IP67

BASE INSTALLATION

To avoid the scratch, please install as followed.

6. Fix ring to the base.

1.Make mounting holes and cable hole in the place(ceiling) to which this camera is installed
using the supplied template sheet

2. Fix the base firmly with supplied mounting screw, plastic anchor

3. Connect BNC cable and communication lines

4. Attach the camera and tall ring

5. Adjust desired focus and scene by turning and moving the sphere by hand

7. Lock the camera with set screw, wrench

Ceiling / Wall

Template Sheet (1x)

Plastic Anchors (4x)

BASE

BTS1 3.5x25 Mounting Screws (4x)

Camera

Tall Ring

Hex socket screw (M2.5xL3)
Fix Ring

.

Ø

6

8 5

Ø93.0

45.5

80.0

To avoid the diffused reflection when IR LED ON, please install as followed.

1. Remove the object near the camera (under 0.5M)

2. Adjust the camera view angle to avoid the diffused reflection by the tall ring.

WARNINGS AND CAUTIONS:

CAUTION:

CAUTIONCAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the product.

Should any liquid or solid object fall into the cabinet,
unplug the unit and have it checked by the qualified
personnel before operating it any further.

Unplug the unit from the wall oulet if it is not going to
be used for several days or more. To disconnect the
cord, pull it out by the plug. Never pull the cord itself.

Allow adequate air circulation to prevent internal heat
build-up. Do not place the unit on surfaces (rugs,
blankets, etc.) or near materials(curtains, draperies)
that may block the ventilation holes.

Height and vertical linearity controls located at the
rear panel are for special adjustments by qualified
personnel only.

Do not install the unit in an extremely hot or
humid place or in a place subject to excessive
dust, mechanical vibration.

Clean the unit with a slightly damp soft cloth.
Use a mild household detergent. Never use
strong solvents such as thinner or benzine as
they might damage the finish of the unit.

Retain the original carton and packing
materials for safe transport of this unit in the
future.

Safety ----------------------------------------- Installation -----------------------------------

Cleaning --------------------------------------

PRECAUTIONS

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR
OTHER OPENINGS ON THE EQUIPMENT.

ii

FCC INFORMATION : THIS EQUIPMENT HAS BEEN TESTED

AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL
DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE
LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION
AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS
OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT
GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY
ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH
THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE
TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN
A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL
INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

CAUTION : CHANGES OR MODIFICATIONS NOT EXPRESSLY

APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE
COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN
ICES-003.

NORME NMB-003 DU CANADA.

WARNING

This is a Class A product. In a domestic environment this product
may cause radio interference in which case the user may be required
to take adequate measures.

CE COMPLIANCE STATEMENT

FCC COMPLIANCE STATEMENT

iii

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
product heat..

9. Do not defeat the safety purpose of the polarized or grounding-type
Plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where

exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Unplug this apparatus during lightning storms or when unused for
long periods of time.

13. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.

14. CAUTION - THESE SERVICING INSTRUCTIONS ARE FOR USE
BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE
RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING
OTHER THAN THAT CONTAINED IN THE OPERATING
INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.

15. Use Certified/Listed Class 2 power source only.

thy

IMPORTANT SAFEGUARDS

iv 1

INTRODUCTION

The Camera provides high-quality using SONY CCD technology especially designed
for closed-cicuit television(CCTV) and security surveillance applications.

Features:

High resolution and high performance 1/3" SONY Super HAD CCD Technology
Excellent picture quality
540 lines(Color) of resolution

1.0 lux(Color), 0 lux(BW at IR ON) @ F.1.2 Sensitivity
Auto electronic shutter [1/60(1/50) ~ 1/100,000]
Auto trace white balance mode
BLC (Black Light Compensation)
AGC (Auto Gain Control)
Video Out (BNC)

3.6mm Fixed Lens
Operates in 12VDC
Use Certified / Listed Class 2 power supply only
Camera Mount : camera mount directly to the wall or ceiling