1
2
3
4
5 6 7
9 11
3
1
1
8
14
E3 Quick Manual
1. Exam Procedure
Patient / Probe /
Report / Review / End
Exam
2. Standard
Keyboard and
Function Keys
3. Parameter
Adjustment
Baseline / Scale /
Angle / Zoom / Depth
/ Focus
4. User Defined
Keys
P1/ P2
5. Annotation
Body mark / Pointer /
Annotation / Clear
6. Control Center
Trackball / Update /
Left & Right Set
Buttons / Caliper /
Calculation
7. Imaging Mode
B / PW / M
8. Image
Management
Print / Cine / Image
9. Freeze/ Unfreeze
10. Automatic
Parameter
Optimization and
Gain Adjustment
11. Dual Mode
12. TGC
13. Parameter
Knobs
14. Power On
Based on Software Version 5.0.1.12
Please Refer to Basic & Advanced User Manual for More Information
Probe Ports
ECG
Foot Switch
1. Getting Start
Create new patient and get into the Scanning
Mode
1. Press [Patient], to create a new patient with
basic patient and exam information;
2. Scanning
B Mode
1. The default scanning mode is B mode; if you
want to return to B mode while you are operating
other modes, please press the [B] on keyboard;
2. Easily adjust parameters with the six knobs just
under the monitor, press the right button for the
2. A patient ID is necessary and will be assigned
if left empty;
3. Press [Probe] and move the [Trackball] to
choose a probe and an appropriate exam.
1. Press [Dual] or [Quad] to get into 2B/4B
imaging;
2. Press [Dual] or [Quad] to change the activated
image.
3. Easily adjust parameters with the six knobs just
under the monitor, press the right button for the
next page of parameters.
3. Press [Auto] for one key image optimization.
2B/4B Imaging
Please Refer to Basic & Advanced User Manual for More Information
next page of parameters.
Color/DPDI Mode
1. Press [CFM] to enter Color mode;
Based on Software Version 5.0.1.12
2. Move the [Trackball] and Press [Set] to change
the position and size of the ROI;
3. Easily adjust parameters with the keys on the
control panel: Baseline, Scale, Depth, Focus;
4. Easily adjust parameters with the six knobs just
under the monitor, press the right button for the
next page of parameters.
PW/CW Mode
1. Press [PW] to enter PW mode;
2. Move the [Trackball] to change the position of
the sample volume;
3. Press [Set] and then move the [Trackball] to
change the size of the sample volume, and rotate
[Angle] to change the angle of the sample volume
line;
4. Press [Update] to activate the Pulse Wave
Doppler image;
5. CW is only available for phased array probes,
press [CW] on the keyboard to enter CW mode.
6. Easily adjust parameters with the six knobs just
under the monitor, press the right button for the
next page of parameters.
Image Adjustments
Parameters in B Mode: Depth, Focus, Gain,
Frequency, Line Density, Gray Map, Chroma,
μ-Scan, Persist, DR, Power, Focus Area, Sector
Width, Compound, Rotation, TSI;
Parameters in Color Mode: Gain, Baseline, Scale,
Depth, Frequency, Line Density, Color Map,
Rotation, B Reject, Persist, WF, Invert, Power.
3. Measurements, Annotations and Body Marks
Measurements, annotations and body marks are
active both in scanning mode and in frozen mode;
Measurements
1. Press [Caliper] to calculate the distance, area,
volume and angle;
2. Press [Calc] to enter the application
measurements menu;
3. Choose the desired measurement item by
moving the [trackball], use [Set] to choose and
mark the correct position.
4. Press [Clear] to clear all marks on the image.
Annotations
1. Press [Annot] to activate the annotations
dictionary, select from the annotations dictionary
or input the annotation through the keyboard.
2. Move the [Trackball] to change the position of
the annotation.
3. Press [Set] to place the annotation at the
desired position.
Body Marks
1. Press [Body Mark] and choose the desired
body mark.
Based on Software Version 5.0.1.12
Please Refer to Basic & Advanced User Manual for More Information
2. Move the [Trackball] to place the probe marker,
and rotate [Body Mark] to adjust the orientation of
the probe marker.
4. Post Scanning
Save Images and Cine
Press [Image] to save a single frame image, or
press [Cine] to save a cine on the system.
Review Patient File
Press [Review] to review the patient file that is
currently active, then select a certain exam to
review images and cines.
Report and Print
3. Press [Set] to place body mark at the desired
position.
reviewing all measurement results and edit
graphs.
2. Click [Image View] to add images, Click
[Summary] to input a summary for the exam;
3. Click [Prev.Save] to preview the report and
then click [Print] to print the report.
End Exam Press [End Exam] to end the
examination.
1. Press [Report] to enter the report interface for
5. Image Management
1. Press [Patient] in the control panel, then enter
the [Patient List] to open an exam of the desired
patient; or press [Review] and choose the desired
patient.
2. Choose the type of medium, then choose the
type of file you want to export, like
6. User-defined Presets
1. After you change some parameters to optimize
the scanning image, press “S” on the alphabet
keyboard to enter the User Preset Menu;
Start a New Patient by repeating the instructions
above
JPG/BMP/AVI/WMV/PDF;
3. Click [Export] to send the images to the
selected USB.
4. Click [DICOM Send] to upload files to DICOM
service.
Type and Part accordingly; then click [Save];
3. You can also enter [Setup] - [Exam Preset] to
change the order of all exam modes.
2. Name the new exam, and choose the Exam
Please Refer to Basic & Advanced User Manual for More Information
Based on Software Version 5.0.1.12
Based on Software Version 5.0.1.12
Please Refer to Basic & Advanced User Manual for More Information
Loading...