Page 1
Wi-Fi Smart Switch
Model:MINI
Input: AC 100-240V 50/60Hz 10A
Output: AC 100-240V 50/60Hz 10A Max
Wi-Fi: IEEE 802.11 b/g/n 2.4GHz
Material：PC V0
Size：42.6x42.6x20mm
Max
Wi-Fi Smart Switch
Please wire the device accor
marking on the cover.
Warning: S1 and S2 can only be connected to the t
wo ends of the wall, and cannot be connected
to strong power such as zero-fire line.
L
Out
L
N
ding to the
Switch
4.1 The wiring diagram to connect the electrical appliance.
L L
N N
Out
Switch
4.2 The wiring diagram to connect the light.
L
When the device is powered on, it is ready to be
paired in the Quick Pairing Mode(Touch), and the
Wi-Fi indicator blinks twice and last for one second.
ning: The antenna has strong internal power and
War
do not break the insulation.
Note: If the device fails to connect to the network or a new
network, please press and hold the configuration
button for 5 seconds until the blue Wi-Fi LED indicator
blinks fast, and then re-pair the device with your
eWeLink account on the app.
L
N
Antenna
Wi-Fi LED(Blue)
Pairing butt
On/Off LED（Red）
Cover
Out
Switch
N
on/Manual switch
Note: Please flip off the main breaker before a
qualified electrician install the device or do the
maintenance. It is not allowed to touch the device
when it is in use.
1. Wat
ch out for electric-shock.
2. Please note the antenna and wire terminal with
strong electricity.
3. Please consult a professional to install.
4. Install the product in a place that is out of reach
during the normal use.
Loading...