SONIQ E46Z11A User Manual
E46Z11A-AU
46” FullHD LED TV
2-5
7-8
9-10
11-17
11
12
13-14
15-16
17
18-24
18
19
20
21
22
23
24
24
25-28
25
26-28
29-40
29
30-31
32-33
34
35-36
37
38-10
41-50
41
42
42-50
42
44
45
48
49-50
51-52
53
1
6
7
8
Table of Contents-------------------------------------------------------------------------------------------------Safety Instruction----------------------------------------------------------------------------------------------Accessories--------------------------------------------------------------------------------------------------------Introduction-------------------------------------------------------------------------------------------------------
Features----------------------------------------------------------------------------------------------------------
Specifications---------------------------------------------------------------------------------------------------
Stand and wall-mounting instructions (optional)--------------------------------------------------General Description
Overview of
-----------------------------------------------------------------------------------------
back panel--------------------------------------------------------------------------------------
Overview of front panel--------------------------------------------------------------------------------------
Overview of remote control---------------------------------------------------------------------------- Teletext -----------------------------------------------------------------------------------------------------
Installing Batteries in the Remote Control--------------------------------------------------------------
External Connection--------------------------------------------------------------------------------------- Connecting VCR ----------------------------------------------------------------------------------------------
Connecting a Camcorder------------------------------------------------------------------------------------
Connecting a DVD Player/Set-Top Box ----------------------------------------------------------------
Connecting a DVD Player/Set-Top Box via DVI ------------------------------------------------------
Connecting DVD Player/Set-Top Box via HDMI ------------------------------------------------------
Connecting Digital Audio System-------------------------------------------------------------------------
Connecting PC
-----------------------------------------------------------------------------------------------
Supporting signals ----------------------------------------------------------------------------------------------
Basic operation-----------------------------------------------------------------------------------------------
Turning the TV on and off----------------------------------------------------------------------------------
Menu operation ------------------------------------------------------------------------------------------
Menu system instruction--------------------------------------------------------------------------------- Picture-----------------------------------------------------------------------------------------------------------
Sound-------------------------------------------------------------------------------------------------------
Channel-----------------------------------------------------------------------------------------------------
Time--------------------------------------------------------------------------------------------------------------
Option------------------------------------------------------------------------------------------------------ Function-------------------------------------------------------------------------------------------------------- PVR---------------------------------------------------------------------------------------------------------Digital Media Player ----------------------------------------------------------------------------------------
Introduction
---------------------------------------------------------------------------------------------------- Device and File Management
USB Support Character
Photo
Music
Movie
Te xt
--------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------
---------------------------------------------------------------------------------
My Disk------------------------------------------------------------------------------------------------------
Troubleshooting ---------------------------------------------------------------------------------------------
Picture defects and the reason------------------------------------------------------------------------------
-1-
-2-
-3-
-4-
-5-
Accessories
Please make sure the following items are included with your LED TV. If any items are missing, contact your
dealer.
POWER
INPUT
123
6
45
789
RECALL
INFO
0
FREEZE SLEEP
MENU
T
F
S
AV
LI
.
H
C
OK/
REC LIST
G
UIDE
EXIT
USB
DTV HDMI
ASPECT
MUTE
VOL PROG
AUDIO LANG
BLUE
RED GREEN
YELLOW
INDEX
TEXT
SIZE
HOLD
SUBTITLE
REVEAL CANCEL
MIX
PgUp PgDn
SUBCODE
SOUND
TIME
PICTURE
Remote Control
Batteryx2
CAUTION:
Do not dispose of batteries in a fire. Do not short circuit,
disassemble or overheat the batteries. Danger of explosion
if battery is incorrectly replaced, please observe polarity.
Replace only with the same or equivalent type.
Owner’s
Instructions
Stand(1 Piece)
M8X10,4 Pieces-see rear panel of TV.
Mounting screws
YPbPr cable(1to3)
and
AV cable(1to3)
M4X10(5 Pieces)
Stand screws
-6-
Features
l TV adopts 46”/55” TFT display screen
l Zero X radiation complies to green environment protection requirement
l Connect to computer directly to realize TV/monitor combo.
l 16:9 wide screen
Auto tuning and fine tuning
l
l HDMI input
l Component Compatible (480i; 480P; 576i; 576P; 720P; 1080i; 1080P)
l PC-RGB
l Programmable sleep timer
l Wide range voltage input
l No-signal automatic power off
Input terminals used for external equipment connection
1 x ANTENNA jack 4 x HDMI inputs
x computer PC-RGB input
1
2 x COMPONENT input
2 x AV inputs 1 x SPDIF output
1 x Headphone output
LED
2 x USB inputs
1 x AV output
-7-
Specifications
Model
Display size
LED panel resolution
Speaker output power
Power supply
TV receive system
Frequency range
Video in
Power consumption
Standby consumption
Antenna Input
Controller power
E46Z11A-AU
46” Diagonal
1920X1080
≥5X2W
~110-240V, 50/60Hz
Digital: DVB-T
Analog: PAL: BG, I, DK,
SECAM: BG, D/K
Analog: Antenna:
46.25MHz-855.25MHz
Digital:5-12, 21-69
PAL / NTSC / SECAM
125W
<1W
75 ohms, unbalanced
DC 3V
(Two AAA size batteries)
(max.)
1109X290X748mm
1109X48X694mm
18.5Kg
15.5Kg
Work Temperature
oo
0C-40C
Note:
- Design and specifications are subject to change without notice.
- Weight and Dimension shown are approximate.
-8-
Stand and wall-mounting instructions (optional)
How to assemble the stand
If you need to remove or assemble the stand please read the following instructions.
-Before attaching/detaching the stand, make sure to turn off the TV.
-Before performing work, spread cushioning over the base area to lay the LED TV on. This will prevent it f
rom being damaged.
Assembling instruction:
1) Assemble the stand and the unit together with five M4*12 screws.
- To disconnect the stand from the TV, perform the above steps in reverse order.
Screws(5-M4X10)
(Figure 1)
Figure 1
Securing the TV Stand
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do
not hang over or destabilize the TV; doing so may cause
all safety precautions For added stability, install the anti-fall device for safety purposes,
as follows.
ALTERNATIVELY
To secure the TV to the wall:
1- Put the screws into the clamps and firmly fasten them onto the wall. Confirm
installed onto the wall.
- You may need additional material such as an anchor depending on the type of wall.
- Since the necessary clamps, screws, and string are not supplied, please purchase them
separately.
2 - Remove the screws from the center back
onto the TV again.
at he start of this manual.
of the TV, put the screws into the clamps, and then fasten the screws
the TV to tip over, causing serious injuries or death. Follow
that the screws have been firmly
-9-
Stand and wall-mounting instructions (optional)
3 - Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong cable.
- Install the TV near to the wall so that it does not fall backwards.
- It is safe to connect the string so that the clamps fixed on the wall
fixed on the TV.
- Remove the cable before moving the TV.
4 - Verify all connections are properly secured. Periodically check connections for any sign of fatigue for
failure. If you have any doubt about the security of your connections, contact
Wall
are equal to or lower than the clamps
a professional installer.
Wall mounting instructions
Your LED TV is able to accommodate wall mounting with the use of a wall mount bracket (not supplied with
LED TV, please contact your local hardware store) and the mounting holes on the back of the unit. We recommend
removing the TV stand prior to wall
How to mount the LED TV on the wall
1.After detaching the stand, fasten 4 mounting screws (Not supplied! Please contact your local hardware store) into
the 4 screw holes on the rear cover, see the figure below.
2.Fasten wall mounting bracket (Not supplied with LED TV,
the wall.
3.Carefully check for the strength before releasing the LED TV.
NOTE: For more detailed instructions please refer to your “after market” wall mounting instruction book.
(optional)
mounting the TV. Please
see previous page for instructions on removing the stand.
please contact your local hardware store) with screws on
Thread hole size – M6 x 10 depth (TV mounting screw size) on the
-10-
TV.
General Description
Overview of back panel
You can connect the TV with video devices such as DVD/VCD player, VCR and video camera to enjoy
the high quality picture.
USB2
USB1
PC (HDMI-output)
PC
Home theatre system
with digital input
Camcorder
DVD player
PC
PC (HDMI-output)
Blu-ray disc player
Audio system
DVD player with
component output
Video game equipment
DVD player
VCR
-11-
General Description
Overview of front panel
The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the
more advanced features, you must use the remote control.
6
7
8
PROG
45
Standby button
Press button to toggle between
normal and standby mode.
PROG
Press to change programs.
In the on-screen menu, use the
PROG buttons as up/down
arrow buttons.
PROG
3
2
Press to display on-screen menu
7
POWER INDICATOR
Red:In standby mode.
Green: In power on mode.
8
1
-12-
General Description
Overview of Remote Control
8
0
MENU
OK /
REC LI ST
MUTE
AUDIO LANG
HOLD
MIX
PICTURE
POWER
6
9
RECALL
SLEEP
F
AV
EXIT
USB
ASPECT
PROG
BLUE
YELLOW
TEXT
SIZE
REVEAL CANCEL
PgUp PgDn
SUBCODE
TIME
INPUT
12 3
45
7
INFO
FREEZE
CH.LIST
G
UIDE
DTV HDMI
VOL
RED GREEN
INDEX
SUBTITLE
SOUND
1. INPUT: This button is used to switch among
different sources: DTV,ATV, AV1, AV2, Component1,
Component2, PC-RGB, HDMI1, HDMI2, HDMI3,
HDMI4, USB.
Select a source and press OK button to confirm.
2. POWER: Press this button to switch to standby
mode,
and press it again to turn TV on.
3. Digital buttons(0~9): To select channel with
digital buttons.
4. INFO: This button is used to start the "Current
Service Banner" application that provides
information about the current service.
5. RECALL: Switch to the previous program.
6. FREEZE:
MENU: Press this button to display main menu or
7.
exit
can press it to return the main menu.
Press this button to freeze the image.
the menu. When you are in the submenu, you
8. SLEEP: TV will be switched off automatically at
preset sleep time if you have set sleep timer. Use
your remote control to set the sleep timer.
Press SLEEP button on the remote control, then
press this button again to set sleep time: off, 10,
20,30, 60,90,120,180, 240 min.
After you have set sleep timer, press SLEEP button
again, you will see the Remaining time.
Notes: The sleep timer you have set will be
Cancelled when
the TV turns off or if a power
failure occurs.
9. CH.LIST: Press it to show channel list on screen.
10. FAV: Press it to display favorite list.
Arrow buttons: Press these buttons to move
11.
cursor up/down/left/right for menu.
OK/REC LIST: Press this button to display a list
12.
of recorded programs. In main
menu and submenu
it is a validation button.
13.
GUIDE: In DTV source, this button is used to
start the EPG application.
EXIT: Exit the menu.
14.
15.
DTV: Switch
to DTV mode.
16. HDMI: Switch to HDMI1 mode directly, press
twice to switch to HDMI2, press three times to
switch to HDMI3, press four times to switch to
HDMI4.
-13-
General Description
Overview of Remote Control
8
0
MENU
OK/
REC LIST
MUTE
AUDIO LANG
HOLD SIZE
MIX
PICTURE
POWER
6
9
RECALL
SLEEP
F
AV
EXIT
USB
ASPECT
BLUE
YELLOW
TEXT
REVEAL CANCEL
PgUp PgDn
SUBCODE
TIME
INPUT
12 3
45
7
INFO
FREEZE
T
IS
CH.L
G
UIDE
DTV HDMI
VOL PROG
RED GREEN
INDEX
SUBTITLE
SOUND
17. USB: Switch to USB mode directly or call the
control menu in USB mode. Please see the
details in “Digital Media Player” on
18. ASPECT
: Press this button to switch the screen
Page40 to Page49.
mode.
VOL and VOL: Press these buttons
19.
to
adjust TV volume.
20. PROGand PROG: Press these buttons to
change channel upward or downward.
In the teletext, these buttons are used to
display the next page and previous page.
21. MUTE: Press this button to shut
off sound of the
TV, press again to restore TV sound.
22. Button/Audio Lang: source
In ATV , the button
is used to set NICAM sound system.
In DTV , the button is used to set the audio
source
language.
source,the button is used to make language
In USB
soundtrack switch(video).
23. Red/Green/Yellow/Blue Command: These four
buttons are used to request linked buttons with the
current menu/page.
24. TELETEXT buttons: Detail operation please refer to
"Teletext “ in the next page.
Digital media player control button:
25. Including
play/pause, stop, previous file, next file, page up,
page down, back, forward, is used to control in
USB mode.
Please refer to
relevant
instructions in the section
of multimedia player.
26. SOUND: This button is used to select the sound
mode.
Music-Movie-Sports-User-Standard
27. PICTURE: This button is used to adjust user
picture mode, press this button repeatedly and
select one of four settings.
Standard" Mild" Bright" User " Sports
MIX ( ): Teletext buttons for mix function, please
28.
refer to page 15. It is also used for recording function
when TV is on DTV mode, please refer to page 39.
-14-
General Description
Teletext
13
INPUT
POWER
12 3
45
8
7
INFO
FREEZE
CH.LIST
GUIDE
DTV HDMI
VOL
RED GREEN
INDEX
SUBTITLE
SOUND
OK/
REC LIST
AUDIO LANG
HOLD
MIX
PICTURE
0
MENU
USB
MUTE
YELLOW
SIZE
REVEAL CANCEL
PgUp PgDn
TIME
RECALL
SLEEP
PROG
6
9
FAV
X
E
ASPECT
BLUE
TEXT
SUBCODE
Teletext is an information system broadcast by certain
channels which be consulted like a newspaper.
It also offers to subtitles for viewers with hearing
problems or who are not familiar with the transmission
language.
You can press these buttons to operate the teletext:
TEXT
Press TEXT button to
enter or exit teletext mode.
HOLD
Press HOLD button to toggle Hold function on or
off. When Hold is switched on, the page acquisition
is stopped. When Hold is switched off, the page
acquisition is started.
SIZE
Press SIZE button one time to display the upper
half of the screen in double height, press the SIZE
IT
button two times to
display the lower half of the
screen in double height, press three times to
display the full screen in normal size.
Red/Green/Yellow/Blue Command
These four buttons are used for quick access to
different pages as numbered at the bottom of the
screen.
INDEX
Press INDEX button, then index page displays.
REVEAL
Pressing this
button will reveal any hidden data
(answers to quizzes for example).Press the REVEAL
button again to return to normal screen.
-15-
General Description
Tele text
13
INPUT
POWER
12 3
45
8
7
INFO
FREEZE
H.LIST
C
OK/
REC LIST
GUIDE
DTV HDMI
VOL PROG
AUDIO LANG
RED GREEN
INDEX
HOLD
SUBTITLE
MIX
SOUND
PICTURE
0
MENU
USB
MUTE
YELLOW
SIZE
REVEAL CANCEL
PgUp PgDn
TIME
RECALL
SLEEP
6
9
F
AV
XIT
E
ASPECT
BLUE
TEXT
SUBCODE
CANCEL
The CANCEL button will exit from any Teletext on
the display. Press CANCEL
button again to exit
Teletext and return to live TV broadcast.
SUBTITLE
Turning the Teletext subtitles on or off.
Subtitles is a separate mode with only a few
buttons available. There will be no OSD visible
other than the Teletext Subtitles.
SUBCODE
Subcode mode gives the
possibility to select
certain subcode pages of a Teletext page.
Entry of digits within the range 0...9 for current
subcode entry. If the digit completes the entry,
a page request is started.
Press PgUp/PgDn buttons to change the
subcode pages.
TIME
This button is used to show the time of the
Teletext.
Digital buttons(0~9)
You can press them to enter the number of the
Page required.
PgUp/PgDn
Yo u can press them to change page upward or
downward.
13
MIX
Press MIX botton, the teletext page changes
transparent, TV content and teletext page
content will display at the same time.
Press MIX button again to exit MIX mode.
-16-
Loading...