SONIQ E40W13A-AU User Manual

Instruction Manual

40" FullHD LED LCDTV

Safety Instruction

1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated.

2. Retain Instructions - The safety and operating instructions should be retained for future reference.

3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.

4. Follow Instructions - All operating instructions should be followed.

5. Battery - Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

6. Earthing Connection - The apparatus shall be connectsd to a MAINS socket outlet with a protective earthing

connection.

7. Water and Moisture - The appliance should not be used near water.

8. Cart and Stands - The appliance should only be used with a cart or stand that is recommended by the manufacturer.

9. Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the

manufacturer.

10. Ventilation - The appliance should be well situated so that its location or position does not interfere with its proper ventilation.

11. Heat - This appliance should be placed away from heat sources such as radiators, heat registersand stoves.

12. Power Sources - The appliance should only be connected to a power supply as described in the operating

instructions or as marked on the appliance.

13. Grounding or Polarization - Precautions should be taken.

14. Power Cord Protection - Power supply cord should be located so that it is not likely to be walked on, or pinched by

items placed upon it.

15. Cleaning - The appliance should be cleaned only as recommended by the manufacturer.

16. Power Lines - An outdoor antenna should be located away from power lines.

17. Outdoor Antenna Grounding - If an outside anternna is connected to the receiver, the antenna system must be

grounded so as to provide against voltages and built-uo static charges.

18. Non-use Periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long period pf time.

19. Objects and Liquids - Care should be taken so that objects do not fall, and liquids are not spilled into the enclosure through openings.

20. Conditions Requiring Service - The appliance should be serviced by qualified service personnel when: The power-supply cord or the plug has been damaged. Objects have fallen on or liquid has been spilled into the appliance. The appliance has been exposed to rain. The appliance does not appear to operate normally or exhibits a marked change in performance.

21. This appliance should not be exposed to water and no objects filled with liquids such as a vase should be placed on the unit. Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

E40W13A-AU

www.soniq.com.au

Caution

When the product is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet.

Caution

Avoid exposing the main unit to direct sunlight and other sources of heat. Do not position television receiver directly on other products which give off heat.e.g. video cassette players, audio amplifiers. Do not block the ventilation holes in the back cover. Ventilation is essential to prevent electrical failure. Do not squash power supply cord under the main unit.

Caution

The panel used in this product is made of glass. It can break if the product is dropped or if force is applied to the panel. Individuals should execute caution when dealing with broken glass should the panel break.

Exemptions

• SONIQ is not liable for any damage caused by fires, natural disaster(such as thunderstorms, earthquake, etc.), asts by the third parties, accidents, owner’s misuse or use in other improper conditions.

• SONIQ is not liable for incidental damages(such as profit loss or interruption in business, modification or erasure

of record data, etc.) caused by use or inability to use of product.

• SONIQ is not liable for any damage caused by neglect of the instructions described in the owner’s manual.

• SONIQ is not liable for any damage caused by misuse or malfunction through simultaneous use of this product

and the connected equipment.

Printed in China

Warning

High voltages are used in the operation of this product. Do not remove the back cover of the cabinet. Refer servicing to qualified service personnel.

Caution

If the television is placed into a confined space, ensure that the minimum distances are observed as shown. Heat build up can reduce the service life of your television, and can also be dangerous.

Warning

To prevent fire or electrical shock hazard, do not expose the main unit to rain or moisture.

Caution

Never stand on, lean on, push or apply force to the product or its stand. You should pay special attention to children.

Warning

Do not insert foreign objects into the television’s slots or openings. Never spill any kind of liquid on the television receiver.

Caution

Do not place the main unit on an unstable cart stand, sheif or table. Serious injury to an individual, and damage to the television, may result should it fall.

Stand Installation

Before performing work please lay the TV on the stand to prevent it from being damaged. Assemble the stand and unit with (5) screws. To remove the stand, reverse instruction as above.

Black Screws: 4x12BB (x5)

Screws: 5PCS 4x12BB

UNIT

STAN D

Installation finished

Connecting the Power Cord

Conne ct the po wer c ord dir ectly t o the wal l out let.

Introduction

Thank you for purchasing the unit. Your unit will bring you years of high-quality viewing enjoyment. The television is easy to operate and provides exceptionally high quality image. The manual will explain the operation of the unit, including its functions, features and other important features. Before installing or operating your unit, please take the time to thoroughly read this manual, particularly the sections on safety.

Package Contents

StandMain Unit

Instruc ti on Manual

War ranty Card

Connection

AC IN

～220-240V AC, 50Hz

21 3

Wall Ant enna Soc ket

Wal l out let

Pow er cord

Mul ti-fa mily Dw ellin gs/Ap artme nts (Co nnect t o wall an tenna s ocket )

Extende d

War ranty Cards

Remote Co nt rol AAA Batter ie s(x2)

Screws: 4 x1 2BB(x7, B la ck, two of them for s pa re)

USB D evice

Out door Ant enna (VH F, UHF )

RF Co axial W ire (75 o hm)

Sin gle-f amily D welli ngs/H ouses

D-SUB 15-pin cable (VGA cable)

Audio cable

Blu-ray DVD Player

Blue

21 3

Red

AC IN

～220-240V AC, 50Hz

Green

DVD Player

Component Video Cable

Audio (AV) Cable

Red

White

Red

White

Yellow

Composite (AV) Video Cable

Video Game

Connection and Setup

Connecting the USB Device Insert USB device directly to unit.

1. Please do not turn off the TV or unplug the USB device when connected USB storage device is working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged.

2. Please use only a USB storage device which was formatted as a FAT32 file system, NTFS file system provided with the Windows operating system. In case of a storage device formatted as a different utility programmer which is not supported by Windows, it may not be recognized.

3. Please connect power to a USB storage device(over 500ma) which requires an external power supply. If not, the device may not be recognized.

4. If the USB HDD does not have an external power source, the USB device may not be detected. So be sure to connect the external power soruce.

5. The recommended capacity is 1TB or less for a USB external hard disk and 32GB or less for USB memory.

6. Only English is supported in USB mode. Other languages such as Chinese, Japanese, etc. Will not be displayed or display an error.

Remote Control

Remote Control Key Functions

Power button

Toggles the unit between standby and on.

Numerical buttons

Press 0-9 to select a TV channel directly when watching TV. The channel changes after 2 seconds or press “OK” button to change immediately.

Press to return to previous channel.

FAV button

In TV mode, press FAV button to display your favorite programs.

SLEEP button

Press to activate sleep timer.

PAUSE button

Press to pause the current picture, press again to resume.

ASPECT button

Press to change the aspect ratio of the TV display.

MENU button

Press to display the main menu.

SOURCE button

Press to display the Source menu.

EXIT button

Exit most menu to default status directly. Press to quit all menu.

EPG button

Open or close EPG menu.

Navigation keys ( ▲/▼/◄/►/OK)

Allows you to navigate the on screen menus and adjust the system settings to your preference. Press OK in DTV mode to display channel list.

REC button

Press to record program to memory storage.

REPEAT

In media source, press to repeat 1 / All or off.

TSR

Press to delay the process of program broadcasting. Has the function of timeshift under DTV mode.

T/R button

In DTV mode, press to switch between radio and DTV channels.

A-B button

Enables you to repeat a selected section during Media video playback or DTV recording file playback.

GOTO button

MEDIA mode.

Note:

USB/SD/3D/DVD/TITLE/PBC/SETUP/D.DIS/ 　/ are invalid.

MUTE button

Press to mute the sound. Press again or press VOL+/- to resume.

P.MODE button

Press to select preset picture mode.

S.MODE button

Press to select preset sound mode.

SUBTITLE button

In DTV mode, press to change subtitle on / off. Has related functions under MEDIA mode.

I-II / AUDIO button

Press to select sound output mode.

INFO button

Press to display the information of current system programme.

VOL+/-

Press to increase / decrease the sound level.

CH Λ / V

Selects a programme in DTV / ATV mode.

PVR.L

Press to display the recorded program list.

CANCEL button

Only available in interactive application, TEXT menu and Music source.

TEXT button

On / Off the teletext. ►ll button Press to playback or pause the program.

D / A button

Switch directly between ATV and DTV.

REVEAL

Display hidden Text characters.

◄◄ button

Press to fast reverse playback.

SUB. PAGE

Prompt the user to enter a subcode for the Text page.

►► button

Press to fast forward playback.

HOLD button

Stop refurbish Text current page.

button

▀

Press to stop media playback. Under DTV mode, press it to stop program recording.

INDEX button

Teletext index page.

l◄◄ button

Press to return to previous chapter or track.

TXT. Size

Toggles the text size display between half top page, half bottom page and normal.

►►l button

Press to skip to next chapter or track.

Reminder

Your unit has integrated HD digital and analog tuner in the same unit. You can enjoy both digital and analog broadcasting under following set-up easily. The latest news, software, utility, driver, product, manual and Q&A will be found at SONIQ website http://www.soniq.com.au

TV Auto Scan

There are two methods for perfoming an automatic digital TV channel search.

Method 1

Country Selection

Please select your country

Country

Australia

NewZealand

ExitOKSelect ExitOKSelect Exit

Time Zone Selection

Please choose your state or territory

Time Zone

Western Australia

Northern Territory

Sounth Australia

New South Wales/ACT

Victoria

Queensland

Tasmania

Channel Tuning

Please choose your channel tuning mode

Scan Channel

DTV+ATV

DTV

ATV

Select

DTV ATV

1. The Initial Setup window will apear when you begin. This system is available in Australia and New Zealand.

2. Press “OK” button to proceed to the next step.

▲/▼ to choose your location and press “OK” to confirm.

3. Use

▲/▼ to choose the scan type, then press “OK” button to start channel tuning.

Use

Channel Tuning

ATV : 0 Programme(s)

DTV : 0 Programme(s)

Radio : 0 Programme(s)

6 %.... VHF CH 11 (DTV)

EXIT

EXITSKIP

Method 2

Press MENU button to enter the CHANNEL page as follows:

A. Auto Tuning

1. Auto Tuning will be highlighted on entering this screen. Press “OK” button to continue.

▲/▼ to select country, Press “OK” button to continue.

Auto Tuning

DTV Manual Tuni ng

ATV Manual Tuning

Programme Ed it Signal Infor mation

Back

Country Selection

Please select your country

Country

Australia

NewZealand

Back

Input Source

DTV

ATV

YPbPr

VGA

HDMI 1

HDMI 2

HDMI 3

MEDIA

Select

2. Press

▲/▼ to select your location and press “OK” to continue.

3. Press Then use

▲/▼ to choose the tuning type.

4. Press “OK” to start auto search.

Time Zone Selection

Please choose your state or territory

Time Zone

Western Australia

Northern Territory

Sounth Australia

New South Wales/ACT

Victoria

Queensland

Tasmania

Back

Select

Channel Tuning

Please choose your channel tuning mode

Scan Channel

DTV+ATV

DTV

ATV

Back

Select

DTV ATV

1. Press SOURCE button on remote control to display Input Source.

▲/▼ button to highlight TV and press “OK” button to confirm.

2. Use

Channel Tuning

ATV : 0 Programme(s)

DTV : 0 Programme(s)

Radio : 0 Programme(s)

6 %.... VHF CH 11 (DTV)

EXIT

EXITSKIP

Supported PC Input Signal

Your unit can use as PC monitor, it supports below RGB-PC, HDMI mode INPUT.

RGB-PC, HDMI mode INPUT SPEC

VGA / HDMI1 / HDMI 2 / HDMI3 Input

Input

Format

Resolution

640 x 480

720 x 400

800 x 600

832 x 624

1024 x 768

1152 x 870

1280 x 800

1280 x 960

1360 x 768

1280 x 1024

1440 x 900

1680 x 1050

1920 x 1080(RGB-PC)

1920 x 1080(HDMI-PC)

Horizontal frequency(KHz)

31.5

37.861

37.5

31.5

37.9

48.077

46.9

49.7

48.4

68.68

47.8

60.0

47.7

63.595

55.9

65.3

66.587

67.5

Vertical frequency(Hz)

Specification

Operating Voltage

Power Consumption

Video Format Supporting

Digital TV

Analog TV

Panel Spec

Input & Output

Audio Power

Unit Dimension

Weight

Design and specifications are subject to change without prior notice.

~220-240V AC, 50Hz

100W, < 1W(Standby)

COMPONENT

HDMI

Programme Coverage

Channel Bandwidth

Video Decode

Audio

TV System

Active Area

Pixel Format

Luminance White

Contrast Ratio

Color Depth

Expected Life Time

ANT IN

HDMI input

USB input

YPbPr input

VGA input

VGA AUDIO input

VIDEO input

DIGTAL AUDIO OUT OPTICAL

8W + 8W

929(L) x 228(W) x 613(H)mm

Net: 9.3kgs Gross: 11.4kgs

Standard

72.809

72.19

59.8

59.9

59.93

VGA

VESA

VGA-T

VESA Guidelines

VESA

Mac

VESA Guidelines

VESA

Mac

───

VESA

───

VESA

480i, 480p, 576i, 576p, 720p (50Hz/60Hz),

1080i (50Hz/60Hz),1080p(50Hz/60Hz).

480p, 576p, 720p (50Hz/60Hz),

1080i (50Hz/60Hz),1080p (50Hz/60Hz).

Australia

VHF-H: 177.5 to 226.5MHz

UHF: 522.5MHz to 816.5MHz

7MHZ

1080i, 720p, 576p, 576i

MPEG -1; MPEG-2; AC-3

PAL B/G; D/K; I

885.6mm x 498.15mm

40 Inch(102cm)

1920horiz.by1080vert

pixels RGB Horizontal Stripe arrangement

240cd/m²

4000:1

8bit(D), 16,7M colors

about 50,000 hours

ANT IN x 1

HDMI x 3

USB x 1

YPbPr x 1

VGA x 1

VGA AUDIO x 1

VIDEO x 1

DIGTAL AUDIO OUT OPTICAL x 1

• AUSTRALIA : 1300 765 663

• NEW ZEALAND : 0800 100 235

HOTLINE