SONIQ E32W13A User Manual

Instruction Manual

MD121225-01

www.soniq.com.au

.
.

AUSTRALIA : 1300 765 663
NEW ZEALAND : 0800 100 236

HOTLINE

E32W13A-AU

www.soniq.com.au

Printed in Chin a

Printed in China

32" HD LED LCDTV

Table of Contents

Safety Instruction

IP Terms and Con ditio ns

Table of Conte nts

Safety Instruc tion. ..………... ..... ..... ........ ..... ..... ........ ..... ..... ........ ..... ... . . ..... . ...... . . . . . . . .........

............ ..... ............. ..... ............. ..... ............. ..... ............. .... . . . .... ......... ..... ....

3-5

Introduction …………… ………..... ..... ..... ........ ..... ..... ........ ..... ..... ........ ..... ..... ...... . ......... . .... .....

Introduction

…….........… ….... ............. ..... ............. ..... ............. ..... ............. .... .... . . .... ......... .

Package Conten ts……. ........ ..... ..... ........ ..... ..... ........ ..... ..... ...... ....... . ... ..... ............. ..... .......

Main Unit Contro l………. ...…………. ..... ..... ........ ..... ..... ........ ..... ..... ........ ..... .... . ...... . .... .... ...

7-8

Front Panel……… …………… ........ ..... ..... ........ ..... ..... ........ ..... ..... ........ ..... ...... .... . .... ...... .....

Rear Panel………… …………. ........ ..... ..... ........ ..... ..... ........ ..... ..... ........ ..... ..... ........ ... . . . ..... ..

Connection and S etup… …………………… ……... ..... ........ ..... ..... ........ ..... ............. ..... ..........

9-12

Connecting the P ower Co rd……………… …………. ............. ..... ............. ..... ........... . . . . . . . . . .....

Connecting the U SB Devi ce...... ....… ……….………………….. ..... .............. . .... . . . . . . . . . . .... .. . . . .

Connecting wit h an HDMI t o HDMI cable ….... ............. ..... ............. ..... ............. ..... ...... . ... ....

Connecting VGA Si gnal… ……...... ..... ............. ..... ............. ..... ............. ..... ............. . . . .........

Component Comp onent Video Si gnals . ..... ........ ..... ..... ........ ..... ...... .... . .... .... .... ..... ............

Connecting Ante nna.. ........ ....… ……........... ..... ............. ..... ............. ..... ............. ..... . ........ ..

Connecting Com posit e Video S ignal s…........... ..... ............. ..... ............. ..... ............. ..... .......

Connecting OPT ICAL Signal... ..... ..... ........ ..... ..... ........ ..... ..... ........ ..... ..... ........ ..... ..... ........

Remote Co ntrol …………… ………….... ..... ............. ..... ............. ..... ............. ..... ........ . . . ...... .

13-14

Remote Control K ey Func tions……… ……... ............. ..... ............. ..... ............. ..... ............. ....

Using the Remote C ontro l....... ..... ..... ........ ..... ............. ..... ............. ..... ............. ..... ... .. . ... ...

Batteries... ..... .………………… ….... ..... ........ ..... ..... ........ ..... ..... ........ ..... ..... ........ ..... ..... ......

Notes on Using Bat terie s………………… ..... ............. ..... ............. ..... ............. ..... ............. ....

Menu Operation G uide… ……...... .………… ..... ........ ..... ..... ........ ..... ..... ........ ..... ..... ........ ...

15-28

Source Selecti on... ........ ..... ..... ........ ..... ..... ........ ..... ..... ........ ..... ..... ........ ..... ..... ........ ..... ...

Vol+/Vol-(Volum e Control)..... ..... ............. ..... ............. ..... ............. ..... ............. ..... ............. .

Menu Operation ..... ........ ..... ..... ........ ..... ..... ........ ..... ..... ........ ..... ..... ........ ..... ..... ........ ..... ...

CHANNEL MENU… …….…… …………………… ….... ..... ........ ..... .... . .... ................ ... . ..... ..

17-18

PICTURE MENU…. …………… …………………… ….... ............. ..... ............. ..... ... .... . .... . ... . . .

SOUND MENU….…… …………… ……………... ..... ..... ........ ..... ..... ........ ..... ..... ...... . ...... ........

TIME MENU…… …………… …………………………... ..... ............. ..... ............. ... .... . . . . ... ..... ...

OPTION MENU……… …………… …………………. ..... ..... ........ ..... ..... ........ ..... ......... . . . . ........

LOCK MENU…………… …………… .…...... ..... ..... ........ ..... ..... ........ ..... ..... ........ ..... .... . .... ....

PVR FUNCTION…… …………… ….…….... ..... ..... ........ ..... ..... ........ ..... ... .... . ...... . . ..... .....

Media Play F UNCTI ON…….... ..... ............. ..... ............. ..... ... .... . .... .... . . . ........ . . . . . ........ ..

Troubleshooti ng and Advice........ ..... ............. ..... ............. ..... ............. ..... ............. ..... .....

22-23

24-28

29-30

Specificatio n.... ........ ..... ..... ........ ..... ..... ........ ..... ..... ........ ..... ..... ........ ..... ..... ........ ..... ..... ......

10

10

11

11

12

12

13

14

14

14

15

16

16

19

19

20

21

21

31

IMPO RTANT S AF ET Y IN ST RUCTION S

1

WARNING

6

6

6

7

8

• TO PR EVENT FIRE OR SHOCK H AZ AR D, DO NOT USE AN EXTEN SI ON C ORD,
RECE PTACL E OR O TH ER OUTLET.

• TO PR EVENT FIRE OR SHOCK H AZ AR D, DO NOT EXPOSE THIS APPL IA NC E
TO RA IN OR MOISTUR E.

• TO PR EVENT ELECTRICA L SHOCK, INS ERT THE MAIN PLUG FU LLY INTO
THE SOCKET OUTLE T.

9

9

CAUTION

This l ig htning flas h wi th
arro wh ead symbol in a n
equi la teral trian gl e alerts
user s to t he p resence o f
unin su lated dange ro us
volt ag e within the
prod uc ts enclosur e th at
may be o f su ff ic ient
magn it ude to consti tu te
a risk o f el ec tric shoc k to
pers on s.

This a pp liancesho ul d not be expose d to w ater and no obj ec t filled with l iq uid such as a vas e sh ould be
plac ed o n the unit.

If a television is not positione d in a sufficiently stable locatio n, i t ca n be poten ti al ly h az ar do us due to fa lling.
Many injuries, parti cu la rl y to c hi ld re n, can b e av oi ded by taking simple precautions such as:

• Using cabinets or stands recommend ed b y the manu fa ct ur er o f th e te le vi si on.

• Only using furniture that can safely support the tel ev is io n.

• Ensuring the television is not overhan gi ng t he e dg e of t he s up po rt in g fu rn iture.

• Not placing the television on tall furnitu re (fo r ex am pl e, c up bo ar ds or bo okcases)
without anchoring both the furni tu re a nd t he t el ev is io n to a s ui ta bl e su pport.

• Not standing the televisions on cloth or other mater ia ls p la ce d be tw ee n th e
televisionand suppor ti ng f ur ni tu re .

• Educating children about the dange rs o f cl im bi ng o n fu rn it ur e to r ea ch t he t el evision
or its controls.

War ni ng: To reduce the ris k of
elec tr ic shock, do no t re mo ve
cove r( or back). No us er
serv ic eable parts i ns ide. Refer
serv ic ing to qualif ie d service
pers on nel.

IMPO RTANT I NF OR MATIO N

The ex cl amation mar k
with in a n equilater al
tria ng le alerts use rs
to the p re se nce of
impo rt ant operati ng
and ma in tenance
(ser vi cing) instr uc ti ons
in the l it erature
acco mp anying the
appl ia nce.

-1-

-2-

Safety Instruction

1. Read instructions-All the safety and operating instruction s should be read befo re the appliance is operated.

2. Retain instructions-The safety and operating instructions should be retain ed for future reference.

3. Heed warnings-All warnings on the appl iance an d in the oper ating in structions should be adh ered to.

4. Follow instructions-All operating instructions should be followed.

5. Battery-Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

6. Earthing Connection-The apparatus shall be connec tsd to a MAINS socket outlet with a protective ear thing
conn ection.

7. Water and Moisture- The appliance should not be used near water.

8. Cart and St ands-The appliance should only be used with a cart or stand that is recommended by the
manufacturer.

9. Wall or Ceiling Mounting-The appliance should be mo unted to a wa ll or ceiling only as recomme nded by the
manufacturer.

10. Ventilation-The appliance should be well situated so that its location or position does not interfere with its
proper ventilation.

11. Heat-This appliance should be placed away from heat sources such as radiators, heat registers and stoves.

12. Power Sources-The applian ce shoul d only be con nected to a power sup ply as described in the operating
ins tructions or as marked on the applian ce.

13. Grounding or Polarization-P recautions should be tak en.

14. Power Cord Protection-Power suppl y cord should be loca ted so that it is not like ly to be walk ed on, or pin ched
by items placed upon it .

15. Cleaning-The appliance should be cleaned only as recommended by the manufacturer.

16. Power Lines-An outdoor antenna should be locat ed away from power li nes.

17. Outdoor Antenna Grounding-if an outside anternna is connected to the receiver, the antenna system must be

grounded so as to provide against voltages and built-uo static charges.

18. Non-use Periods-The power cord of the appliance should be unplugged from the outlet when left unused for a

long peri od pf time.

19. Objects and Liquids-Care should be taken so that obje cts do not fa ll, and liquids are not spill ed into the

enclosur e throug h openings.

20. Conditions Requiring Se rvice-The appliance should be se rviced by qualified service personnel

when:
The power-suppl y cord or the plug has bee n damaged.
Objects have fall en on or liqu id has been spilled into the appliance.
The appliance has be en exposed to rain.
The appliance does not appea r to operate normally or exhibits a marked change in performance.

21. This appliance should not be exposed to water and no objects filled with liquids such as a vase should be

placed on the unit.

Safety Instruction

Minim um d ist an ces

3cm

Warning

High voltages are used in the operation of this product.
Do not remove the back cover of the cabinet. Refer
servicing to qualified service personnel.

Warning

To prevent fire or electrical shock hazard, do not expose
the main unit to rain or moisture.

Warning

Do not insert foreign objects into the television’s slots
or openings. Never spill any kind of liquid on the television
receiver.

Caution

If the television is placed into a confined space, ensure
that the minimum distances are observed as shown.
Heat build up can reduce the service life of your
television, and can also be dangerous.

Caution

Never stand on, lean on, push or apply force to the
product or its stand.
You should pay special attention to children.

-3-

-4-

Safety Instruction

Caution

Do not place the main unit on an unstable cart stand,
sheif or table.
Serious injury to an individual, and damage to the
television, may result should it fall.

Caution

When the product is not used for an extended period
of time, it is advisable to disconnect the AC power
cord from the AC outlet.

Caution

Avoid exposing the main unit to direct sunlight and
other sources of heat. Do not position television
receiver directly on other products which give off heat.
e.g. video cassette players, audio amplifiers. Do not
block the ventilation holes in the back cover.
Ventilation is essential to prevent electrical failure.
Do not squash power supply cord under the main unit.

Instruction

Introduction

Thank you for purchasing the unit. Your unit will bring you years of high-quality viewing enjoyment. The television
is easy to operate and provides exceptionally high quality image. The manual will explain the operation of the unit,
including its functions, features and other important features. Before installing or operating your unit, please take
the time to thoroughly read this manual, particularly the sections on safety.

Package Contents

Main U ni t

Stan d

Inst ru ct ion Manua l

Caution

The panel used in this product is made of glass.
It can break if the product is dropped or if force is
applied to the panel. Individuals should execute caution
when dealing with broken glass should the panel break.

Exem pt io ns

• SONI Q is n ot l iable for a ny d am age cause d by f ir es, natur al d is aster (su ch a s th underst or ms ,
eart hq ua ke, etc.) , ac ts b y the third p ar ti es, accid en ts , owner ’s m isuse or us e in o th er

impr op er conditio ns .

• SONI Q is n ot l iable for i nc id ental dam ag es (such as pro fi t lo ss or inter ru pt ion in busi ne ss,
modi fi ca tion or era su re o f record da ta , et c.) cause d by u se o r inabili ty t o us e of produc t.

• SONI Q is n ot l iable for a ny d am age cause d by n eglect of the i ns tr uctions d es cr ibed in the
owne r’s manua l.

• SONI Q is n ot l iable for a ny d am age cause d by m is use or malf un ct ion throu gh s imultaneo us

use of t hi s pr oduct and t he c on nected eq ui pment.

-5-

Remo te C ontrol
AAA Bat te ri es(x2)

Quic k Re fe rence

Scre ws : 4x 12BB(x5 , Bl ac k,
one of t he m fo r spare)

-6-

War ra nty Card

Clea ni ng Cloth

Exte nd ed
War ra nty Cards

Main Unit Control

Front Panel

Main Unit Control

Rear Panel

No.

Name Desc ri ption

Powe r In dicator

Remo te C ontrol
Sens or W in dow

VOL+ /-

CH+/ -

SOUR CE

Flashes re d wh en t he u ni t is p ow ered on;
Lights up red wh en t he u ni t is i n st an dby mode.

Receives the sig nal from the remote con trol. Do not put any
objects in front of the wi ndow in order not to hinder the
reception of sig nals.

Press VOL+ to incr ea se v ol ume, or VOL - to decrease.
At the OSD menu, pre ss t he se b ut to ns to move the selection
focus left and rig ht t o ch an ge s ettings.

Press th es e bu ttons to sequen ti al ly select chann el s.
When the O SD m en u is on, press these bu tt on s to move the
select io n fo cus up or down to cha ng e se tt ings.

Pre ss to display all possible input signal sources.
Pre ss to cycle through various sources.

1

2

USB( RE C)

HDMI 1/ HDMI2/HDM 3

3

4

5

6

AUDI O IN

1

YPbP r

ANT IN

VGA

2

Connect for media files playback and program recording.

Conn ec t th e HDMI sign al .

Conn ec t th e PC VGA signa l ou tput of your pe rs on al comput er.

Conn ec t th e compone nt v ideo signal .

Conn ec t to e xternal a nt enna.

DVI or P C VG A aud io input.

3

4

2

7

5 6

8 9

MENU

STANDBY

Pre ss th is button to display the OSD menu.
Whe n the OSD menu is on, press this butt on to exit the menu.

Pr es s this bu tton to t ur n the u ni t on when i t is in sta ndby mo de .
Pr es s this bu tton on ce m ore to pu t it to s ta ndby mo de .

-7-

7

8

DIGI TAL AUD IO O UT

9

AUDI O IN

VIDE O IN

OPTI CA L

Co nnect t he audi o outpu t of your AV eq uipme nt to the u nit .

Conn ec t th e video out pu t of your AV equipment to t he u ni t.

Conn ec t th e OPTICAL to t he Audio Ampl if ier using a opt ic al cable.

-8-

Connection and setup

Connecting the Power Cord

Conn ec t th e power cor d di rectly to the w al l outlet.

Wal l out le t

Power c or d

The product must be operated only from the type of power source indicated on the marking label (220-240 ~ 50Hz).

Connection and setup

Connecting with an HDMI to HDMI cable

Conn ec t th e HDMI outp ut t er minal of yo ur H DM I device to t he H DM I input ter mi na l on the unit u si ng a n
HDMI c ab le.

HDMI c ab le HDMI c ab le

PS3

Blu- Ra y DVD Player

If the unit will not be used for a long period of time, it should be unplugged from the wall outlet.

Connecting the USB Device

In s ert USB de v ice dir e ctly to th e u n it.

1. Please do not turn off the TV or unplug the USB device when the connected USB storage device is
working. When such device is suddenly separated or unplugged, the stored files or the USB storage

device may be damaged.

2. Please use only a USB storage device which was fo rmatted as a FAT32 file system, NTFS file system
provided with the Windows operating system. In case of a storage de vice formatted as a different utility
programmer which is not supported by Windows, it may not be recognized.

3. Please connect po wer to a USB storage device(over 500mA ) which requires an externa lpower supply.

If not, the device may not be recognized.

4. If the USB HDD does not have an extern al power source, th e USB device may noy be detected.
So be sure to connect the external power source.

5. The recommended capacity is 1TB or less for a USB external hard disk and 32GB or less

for USB memory.

6. Only English is supported in USB mode. Other languages such as Chinese, Japanese, etc.

will not be displayed or display an error.

Connecting VGA Signal

Conn ec t PC video outp ut t o th e VGA IN input t er mi nal using M in i D-SUB 15-Pi n ca ble.
Conn ec t th e audio out pu t of your PC to the u ni t VG A AUDIO IN inpu t te rm inal usin g an a pp ropriat e ca ble.

1. If th e in pu t signal re so lu tion is hig he r th an the defa ul t display res ol ution, the sc re en may be unabl e to
disp la y im age detai ls c learly.

2. Cer ta in P C models ca nn ot be connect ed t o th e unit.

3. The compu te r in the illust ra tion is shown o nl y for referen ce ; yo ur equipm en t may vary.

4. Addi ti onal equipm en t shown in the il lu stration is n ot p rovided.

5. Do no t se t th e compute r’s horiz on tal and verti ca l scanning fr eq uencies les s th en or greater t ha n the
freq ue nc y range of th e un it . (refer to s up po rted PC Inp ut S ig nal)

6. If yo u re qu ire more in fo rm ation on ho w to c on nect your e qu ip ment, ple as e re fer to the ma nu al f or
the pi ec e of e quipmen t yo u wi sh to attac h.

Aud io cabl e

USB De vi ce

-9-

D-SUB 1 5-pin c ab le
(VG A cab le)

PC

-10-