SONIQ E32S12A User Manual

32" LED LCD SmartTV

E32S12A-AU

HOTLINE

.

AUSTRALIA : 1300 765 663

.

NEW ZEALAND: 0800 100 236

Printed in China

Table of Contents

IP Terms and Conditions

IP Terms an d Condition s

Table of Contents

Table of Contents..........................................................................................................1

IP Terms and Condi tions.. .………..... ....... ......... ....... ....................................................2-6

Introduction…………………….......................................................................................7-10

Pack age Contents…………..........................................................................................11

Intr oduction…………….…............................................................................................11

Main Unit Control………....…………............................................................................12-13

Fron t Panel…………………….......................................................................................12

Rear P anel……………………........................................................................................13

Connection and Setup…………………………….............................................................14-17

Connecting the Power Cord………………………….................................................. .......14

Connecting HDMI/VGA/PC Signals………….…………………..........................................14

YPbPr Co nnection…………….………………................................................................ ...15

OPTI CAL/Lin e Out Connect ion………………..................................................................15

USB Connection…….………….....................................................................................16

ANT IN Connection…………………...............................................................................16

Ethe rnet/SD /MMC Connec tion……… ............................................................................17

AV Connection………………….……..............................................................................17

Remote Control……………………….............................................................................18-20

Re mote Cont rol Key Fun ctions……………......................................................................18

Remo te contro l for Smart TV... .……………. ......... ....... ....................................................19

Usin g the Remot e Control.. ....... ................................................................................ ...20

Remote Co ntrol………… …………... ......... ....... ......... ....... ...............................................20

No tes on Usin g Batteri es…………………........................................................................20

Smart TVFunction (HOME Menu)……...….....……………...............................................21-36

Accessing HOME menu ……….………………….................................................................21

Wired Netwo rk Connection……….............................................................................22-23

Wireless Network connection……............................................................................24-25

Tips fo r Network S etting... ....... ......... ............................................................................26

Application Program Functions................................................................................27-33

Updating the TV Firmware.......................................................................................34-36

OSD Menu Operation…………………………..................................................................37-44

CHAN NEL MENU ……….……………………………......................................................37-38

PICT URE MENU… .……………………………………....................................................38-39

SOUN D MENU….………………………………..................................................................39

TIME MENU…………………………………………….....................................................39-40

OPTION MENU………………………………………...........................................................40

LOCK M ENU………………………….…...........................................................................41

PVR FUNCTION…………………….……...................................................................41-43

EPG… ………………………………………...................................................................43-44

Specification.............................................................................................................45-46

Troubleshooting........................................................................................................47-48

SONIQ IP TV END USER SOFTWARE LICENCE AGREEMENT ­ IMPORTANT, READ CAREFULLY BEFORE PROCEEDING

This is a licence agreement between You and Soniq granting you a licence to use the Software. By using the Software
you are deemed to have accepted the te rms of t his Agr eemen t. If you do not accept the terms of this Agreement
do not use the Software.

Soniq does not store an individual copy of this Agreement e nt er ed i nt o wi th y ou a nd w e re co mm en d th at You s av e
a local copy of this Agreement for Your own record. A copy of this Agreement can be found at [WEBSITE]. If you
are under 18 years of age you must obtain a parent/guardian's consent before using the Software.

1. Definitions

In this Agreement:
"Agreement" means this licence agreement between You and Soniq comprising th e terms You a cc ep t by u si ng
the Software;
"Authorised Purposes" means the non-commercial use by You of the Software as a platform to access Content;
"Content" means content provided by both Soniq and third parties via the in te rn et t ha t You ac ce ss u si ng t he
Software;
"IPTV" means the television sets produced by Soniq that are capable of connecting to, and downloading content
from, the internet through the use of the Software.
"Software" means the software integrated into Soniq's IPTV sets;

"Soniq" means Quatius Aust Pty Ltd (ACN 130 310 048) trading as Soniq;

"Term" means the period beginning on the date you accept this Agreement an d en di ng o n te rm in at io n of t he
Agreement in accordance with clause 6;
"Third Party Content" means any Content that is created by someone other than Soniq; and
"You" or "You r" m ea ns y ou o r an y us er o f th e So ft wa re .

2. Licence

2.1 Subject to the terms and conditions of this Agreement, Soniq grants to You a non-exclusive and non-transferable
licence during the Term to use the Software for the Authorised Purposes.

2.2 Use of the Software signifies Your acceptance of this Agreement.

2.3 Any use of the Software other than as expressly authorised by this Agreement, or any resale or further
distrib ution of the Software by You, const itutes a material breach of this Agreement and may violate applicable
copyright law.

3. Changes to this Ag re em en t

3.1 Soniq is permitted to alter this Agreement from time to time by giving You seven (7) days notice.

3.2 Your c on ti nu ed u se o f th e So ft wa re a ft er t he n ot ic e pe riod ends constitutes your acceptance of the modified
Agreement.

3.3 If You do not accept the modified Agreement you must immediately stop using the Software.

4. Restrictions on use

4.1 You mu st n ot , an d mu st n ot p er mi t an y th ir d pa rt y to :
(a) access or duplicate the Software for any purpose other than as reasonably necessary to use the Software
as contemplated by this Agreement;
(b) publish the Software, or use the Software other than for the Authorised Purpo se s;
(c) except as expressly authorised by law, reve rse engi neer, disassemble, decompile, translate, reconstruct,
transform or extract the Software or any portion of the Software;
(d) except as expressly authorised by law or as permitted using the Software's standard menu option, change,
modify or otherwise alter the Software including by disabling any feature or blocking any advertisement
or message intended to be displayed;

-1-

-2-

IP Terms and Conditions IP Terms and Conditions

(e) transfer, pledge, rent, share or sublicense the Software;
( f ) defeat or circumvent, attempt to defeat or circumvent, or authorize or assist any third party in defeating
or circumventing controls on the use of copies of the Software; or
(g) engage in any conduct or activity that may cause damage to the Software, disrupt access to the Software
or otherwise interfere or affect the performance of the Software.

5. Access and support

5.1 You ar e re sp on si bl e fo r ac cessing and using the Software. Soniq is not obligated to provide You with any
services or technical support in relation to the Software under this Agreement.

5.2 Soniq may at any time and in its sole discretion:
(a) disable or suspend Your access to the Software; or
(b) screen, filter, review, modify, block or refuse access to any Content that may be accessed by the Software,
but is under no obligation to do so.

6. Termination

6.1 Without prejudice to any of its other rights, Soniq shall be entitle d to t er mi na te t he l ic en ce g ra nt ed b y th is
Agreement without liability:
(a) on five (5) days notice to You, at Soniq's sole discretion; or
(b) for cause at any time without notice if You commit a material breach of this Agreement.

6.2 You ma y te rm in at e th is Ag re ement on seven (7) days notice by giving notice to Soniq at [WEBADDRESS/
EMAIL AD DR ES S] o r by p er ma ne nt ly c easing to use the IPTV.

6.3 The termination of this Agreement does not affect any rights, obligations or liabilities that S on iq has accrued
under the Agreement prior to termination.

6.4 On the expiration or termination of this Agreement, Soniq will terminate Your access to the Software.
Sections 4, 7, 10, 12,13, and 14 will survive the expiration or termination of this Agreement.

7.I ntellectual Property

7.1 Content provided by Soniq forms part of Soniq's intellectual property.

7.2 Soniq reserves all rights in the Software not expressly granted by this Agreement. All copyrights, trademarks
and other conceivable intellectual property rights in and to the Software (including, but not limited to, all code,
dat a files, images appearing in the Software and screen displays as well as any and all documentation relating
to the Software) are owned or licensed by Soniq, and are protected by law.

7.3 Third Party Content may be subject to third party intellectual property rights, including but not limited to
copyright, trade mark and design rights.

7.4 The licence granted by this Agreement is a bare licence to us e th e So ft wa re a nd d oe s no t gr an t an y ri gh t in
Soniq's intellectual property or any third party intellectual property displayed or accessed via the Software.

7.5 Soniq does not authorise any act that would infringe Soniq's intellectual property or any third party intellectual
property rights including but not limited to the reproduction, distribution, sale, modification or grant of licence
in any intellectual property owned by a third party.

7.6 You he re by i nd emnify Soniq for all loss and damage suffered by it due to Your breach of any of Soni q' s or a
third party's intellectual property rights.

8. Internet Usage

8.1 Use of the Software requires an internet connection. It is You r re sp on si bi li ty t o ob ta in a nd m ai nt ai n an
internet connection at your cost.

8.2 Soniq uses the Software to promote goods and services offered by Soniq and third parties. These
advertisements will require You to download Cont en t from the Internet and may incur costs from Your
internet service provider.

8.3 Any Content You access via the Software may result in additional downloads and may incur costs from Your
internet service provider.

8.4 You ar e en ti re ly r es po ns ib le for making enquiries with Your Internet Service Provider as to the costs incurred
by using the Software or downloading Content via the Software.

9. Software Usage

9.1 Soniq does not guarantee that Your use of the Software wil l be u ni nt er ru pt ed a nd You r ab il it y to u se t he
Software will be affected by the performance of Your internet which is the responsibility of Your internet
service provider.

9.2 You mu st s up er vi se a nd c on tr ol t he u se o f th e So ft wa re a nd e ns ur e th at a ll u se o f th e So ftware is for the
Authorised Purposes and in accordance with this Agreement.

10. Content

10.1 Soniq does not warrant that any Third Party Content, including any links to third party websites, is safe to
access, free from viruses and malware, correct or reliable. All Third Party Content is entirely the
responsibility of the third party supplier and is accessed at Your risk.

10.2 By using the Software You may be exposed to Third Party Content that You find offensive, indecent,
objectionable or unlawful.

10.3 You a gr ee t ha t So ni q is n ot r es po ns ib le f or e xa mi ni ng o r evalua ting Third Party Co ntent an d So ni q ma ke s
no representations as to the suitability of Third Party Content.

10.4 Soniq does not warrant, guarantee or make any representation:
(a) regarding the accuracy, adequacy, rel ia bi li ty, completeness or timel in es s of t he C on te nt ;
(b) that the Content is free from human or mechanical error, technical inaccu ra ci es o r ot he r typographical
errors or defects; or
(c) that the Content is suitable for Your intended use.

10.5 The use of any Content is at Your own risk.

10.6 All warranties, representations and statutory guarant ee s an d an y li ab il it y wh ic h ma y ar is e in r el at io n to
Your access to the Content is expressly excluded to the maximum extent permi tt ed b y la w.

10.7 If You have any concerns about Content supplied by Soniq accessed through the Software please contact
Soniq at [website/email]. If you have concerns about the Third Party Content, please contact the Australian
Communications and Media Authority on 1300 850 115.

11. Updates

11.1 From time to time, Soniq may (but is not obliged to) create a new, updated or enhanced version of the
Software in which case Soniq may (but is not obliged to) make it available to You. A fee m ay a pp ly.

11.2 If Soniq makes updated Software available to You:
(a) Soniq may require You to use it instead of a superseded version;
(b) changes to the Software or its content cannot be reversed;
(c) information or data provided by You under the superseded ver si on m ay b e cl ea re d an d ma y ne ed t o be
recreated or entered again;
(d) this Agreement will apply unless Soniq specify otherwise; and
(e) Soniq does not guarantee that any superseded version will remain a va il ab le .

12. Liability and Disclaimers

12.1 All Software is provided on an "as is", "as available" basis. You a ck no wl ed ge t ha t th e So ft wa re , du e to i ts
nature, cannot be guaranteed error free and You accept that the existenc e of s uc h er ro rs s ha ll n ot b e
construed as a breach of this Agreement of section 54 of the Australian Consumer Law Schedule to the
Competition and Consumer Act 2010 (Cth) as amended ("ACL").

12.2 You a re s ol el y re sp onsible for ensuring the Software is suitable for Your purposes, including the Approved
Purposes. You have not made known to Soniq any particular purpose for which You require the Software.

12.3 Except as specifically stated herein, or as contained in any express warranty provided in relation to the
Software, the Agreement does not include by implication any other term, condition or warranty in respect
of the quality, merchantability, ac ce pt ab il it y, fitness for purpose, condition, description, assembly,
manufacture, design or performance of the Software or any contractual remedy

12.4 You a ck no wl ed ge t ha t:
(a) You ha ve n ot r el ie d on a ny s er vice involving skill and judgement, or on any advice, recommendation,

for its failure.

-3-

-4-

IP Terms and Conditions IP Terms and Conditions

information or assistance provided by Soniq in relation to the Software or its use or appl ic at io n.
(b) You ha ve n ot m ad e kn ow n eithe r expres sly or by implication, to Soniq any purpose for which You require
the Software and You have the sole responsibility of satisfying Yourse lf t ha t th e So ft wa re i s su it ab le
for Your intended use.

12.5 If You are a consumer as defined in the ACL, nothing in this Agreement restricts , li mi ts o r mo di fi es You r
rights or remedies against Soniq for failure of a statutory guarantee provided under the ACL.

12.6 If clause 12.5 does not apply, then other than as stated in the Agreement or any written warranty
statement, Soniq is not liable to You in any way howsoever arising under or in connection with the sale,
licence, installation, use of, storage or any other dealings with the Software by You or any third pa rt y.

12.7 For clarity, except to the extent of any liability imposed by the ACL:

(a) Soniq will not be liable to any party in any way for any injury, loss or damage arising out of or related to
the use (or the inability to use) the Software,
(b) Soniq will not be liable for any direct, indirect, incidental, special or consequential loss or damage,
including loss of programs or data, corrupted programs or data, deleted programs or data, or the cost
of servicing or replacing equipment.

12.8 Nothing in this Agreement is to be interpreted as exclud ing, restricting or modifying the effect or application
of any legislation that cannot be so excluded, restricted or modifie d.

13. Privacy and Security

13.1 Any personal information provided by You to Soniq via the Software will be held on a database maintained
by or on behalf of Soniq.

13.2 The information on this database may be used, stored and transmitted by Soniq in accordance with the
Online Privacy Policy. For example, Soniq may use this information for marketing, planning, product
development, research and other commercial purposes. Fo r fu rt he r de ta il s, p le as e re fe r to S on iq 's
Online Privacy Policy [LINK].

15.2 Soniq is under no obligation to respond or act on to any such comments or suggestion s, b ut You g ra nt
Soniq a perpetual, irrevocable, fully paid-up, royalty-free, worldwide right and licence under your
intellectual property rights (if any) to implement Your comments and suggestions in the Software and any
other products and services offered by Soniq, its affiliates, and their respective licensors, licensees,
successors and assigns.

14. Miscellaneous

14.1 Notice. Soniq may deliver any notice to You via pop-u p wi nd ow, d ia lo g bo x or o th er m ea ns , ev en t ho ug h
you may not receive the notice unless and until You launch the Softwar e. An y su ch n ot ic e wi ll b e de em ed
delivered on the date Soniq first makes it available through the Software, irrespective of when You actually
receive it.

14.2 Complete Agreement. This Agreement constitutes the complete Agreement between the You and Soniq
and supersedes all previous communications and representations or agreements, either oral or written,
with respect to the Software.

14.3 Wa iv er. An y fa il ur e by So niq to insist up on or en force strict performance of any provision of this Agreement
shall not be construed as a waiver of any such provision or right. Any waiver is only valid if in writing and
only to the extent set out in the waiver.

14.4 Severability. If a pr ov is io n is u ne nf or ce ab le i t mu st b e re ad d ow n to be enforceable or, if it cannot be read
down, the provision must be severed from the Agreement, without affecting the enforceability of the
remaining provisions.

14.5 Governing Law. This Agreement will be governed by the laws of the State of Victoria, Australia.

14.6 No Third Party Beneficiaries. This Agreement is intended solely for the benefit of You a nd S on iq . No
person not a party to this Agreement may bring a c au se o f action pursuant to this Agreement as a third
party beneficiary hereof.

14.7 Spam. The publication of Soniq's email addresses in this Agreement is to facilitate communications
relating to the Software supplied by Soniq. It must not be inferred as consent by Soniq to receive
unsolicited commercial electronic messages.

15. Customer Comments and Improvements.

15.1 Soniq welcomes your comments concerning the Software, including notice that You have experienced a
Software failure, error or other malfunction and suggestions for additional o r di ff er en t fe at ur es a nd
functions. Please send Soniq Your comments and suggestions to [EMAIL ADD RE SS ] or b y us in g th e
web form located at [WEB ADDRESS].

-5-

-6-

Safety Instruction

Safety Instruction

IMPORTANT SAFETY INSTRUCTIONS

WARNI NG

TO PREVENT FI RE O R SH OC K HA ZA RD ,D O NO T USE AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET.
TO PREVENT FIRE OR SHOCK HAZARD,DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
TO PREVENT ELECTRICAL SHOCK,INSERT THE MAIN PLUG FULLY INTO
THE SOCKET OUTLET.

CAUTION

This lightning flash with
arrowhead symbol in an
equilateral triangle alerts
users to the presence of
uninsulated dangerous
voltage within the
products enclosure that
may be of sufficient
magnitude to constitute
a risk of electric shock to
persons.

This applianceshould not be exposed to water and no object filled w it h li qu id s uc h as a v as e sh ou ld b e pl ac ed o n
the unit.

IMPORTANT INFORMATION

If a television is not positioned in a sufficie nt ly s table location,it can be potentially hazardous due to falling.
Many injuries,particularly to children,can be avoided by taking simple precautions such as:
Using cabinets or stands recommended by the manufacturer of the television.
Only using fu rn iture that can sa fe ly s upport the television.
Ensuring th e te levision is not ove rhanging the edge of the supporting furniture.
Not placing t he t elevision on tall furniture (for example,cupboards or bookcases)
without anchoring both the furniture and the television to a suitable support.
Not standin g th e televisions on cloth or other materials placed between the
televisionand supporting furniture.
Educating c hildren about the dangers of climbing on furniture to reach the television
or its cont ro ls .

War ni ng :To re du ce t he r is k of
electric shock,do not remove
cover(or back).No user
serviceable parts inside.Refer
servicing to qualified service
personnel.

The exclamation mark
within an equilateral
triangle alerts users
to the presence of
important operating
and maintenance
(servicing)instructions
in the literature
accompanying the
appliance.

1. Read instructions-All the safety and operating instructions should be read before the appliance is operated.

2. Retain instructions-The safety and operating instructions should be retained for future reference.

3. Heed warnings-All warnings on the appliance and in the operating instructions should be adhered to.

4. Follow instructions-All operating instructions should be followed.

5. Battery-Batteries shall not be exposed to excessive heat such as sunshine,fire or the like.

6. Earthing Connection-The apparatus shall be connectsd to a MAINS socket outlet with a protective earthing
connection.

7. Water and Moisture-The appliance should not be used near water.

8. Cart and Stands-The appliance should only be used with a cart or stand that is recommended by the
manufacturer.

9. Wall or Ceiling Mounting-The appliance should be mounted to a wall or ceiling only as recommended by the
manufacturer.

10. Ventilation-The appliance should be well situated so that its location or position does not interfere with its proper
ventilation.

11. Heat-This appliance should be placed away from heat sources such as radiators, heat registers and stoves.

12. Power Sources-The appliance should only be connected to a power supply as described in the operating
instructions or as marked on the appliance.

13. Grounding or Polarization-Precautions should be taken.

14. Power Cord Protection-Power supply cord should be located so that it is not likely to be walked on, or pinched by
items placed upon it .

15. Cleaning-The appliance should be cleaned only as recommended by the manufacturer.

16. Power Lines-An outdoor antenna should be located away from power lines.

17. Outdoor Antenna Grounding-if an outside anternna is connected to the receiver,the antenna system must be
grounded so as to provide against voltages and built-uo static charges.

18. Non-use Periods-The power cord of the appliance should be unplugged from the outle t when left unused for a
long period pf time.

19. Objects and Liquids-Care should be taken so that objects do not fall,and liquids are not spilled into the
enclosure through openings.

20. Conditions Requiring Service-The appliance should be serviced by qualified service personnel
when:
The power-supply cord or the plug has been damaged.
Objects have fallen on or liquid has been spilled into the appliance.
The appliance has been exposed to rain.
The appliance does not appear to operate normally or exhibits a marked change in performance.

21. This appliance should not be exposed to water and no objects filled with liquids such as a vase should be placed
on the unit.

-7-

-8-

Safety InstructionSafety Instruction

Warning

High voltages are used in the operation of this product.
Do not remove the back cover of the cabinet. Refer servicing
to qualified service personnel.

Warning

To prevent fire or electrical shock hazard, do not expose the
main unit to rain or moisture.

Warning

Do not insert foreign objects into the television’s slots
or openings. Never spill any kind of liquid on the television
receiver.

Caution

Do not place the main unit on an unstable cart stand,
sheif or table.
Serious injury to an individual, and damage to the
television, may result should it fall.

Caution

When the product is not used for an extended period
of time, it is advisable to disconnect the AC power
cord from the AC outlet.

Caution

Avoid exposing the main unit to direct sunlight and
other sources of heat. Do not position television
receiver directly on other products which give off heat.
e.g. video cassette players, audio amplifiers. Do not
block the ventilation holes in the back cover.
Ventilation is essential to prevent electrical failure.
Do not squash power supply cord under the main unit.

3cm

Caution

If the television is placed into a confined space, ensure
that the minimum distances are observed as shown.
Heat build up can reduce the service life of your
television, and can also be dangerous.

Caution

Never stand on, lean on, push or apply force to the
product or its stand.
You should pay special attention to children.

-9-

Caution

The panel used in this product is made of glass.
It can break if the product is dropped or if force is
applied to the panel. Individuals should execute caution
when dealing with broken glass should the panel break.

Exemptions

SONIQ is not liable for any damage caused by fires,natural dis as te r (s uc h as t hu nd er st or ms ,
earthquake,etc.),acts by the third parties,accidents,owner’s mis us e or u se i n ot he r
improper conditions.
SONIQ is not liable for incidental damages (such as profit loss or interruption in business,
modification or erasure of record data,etc.)caused by use or inab il it y to u se of product.
SONIQ is not liable for any damage caused by neglect of the instructions described in the
owner’s manual.
SONIQ is not liable for any damage caused by misuse or malfunc tion through simultaneous
use of this product and the connected equipment.

-10-

Instruction

Introduction

Thank you for purchasing the unit. Your unit will bring you years of high-quality viewing enjoyment. The television is
easy to operate and provides exceptionally high quality image. The manual will explain the operation of the unit,
including its functions, features and other important features. Before installing or operating your unit, please take the
time to thoroughly read this manual, particularly the sections on safety.

Package Contents

Main Unit Control

Main Unit

War ra nt y Ca rd

Screws: 4x10mm BM(x6, Black,
one of them for spare)

Stand

Extended
Warranty Cards

Cleaning Cloth

Instruction Manual

Remote Control
AAA Batteries(x2)

AV CableYPbPr Cable

No.

Name Description

Remote Control
Sensor Window

Power Indicator

VOL+/-

CH+/-

SOURCE

MENU

STANDBY

Receives the signal from the remote control. Do not put any
objects in front of the window in order not to hinder the
reception of signals.

Flashes red when th e un it i s powered on;
Lights up red when the unit is in standby mode.

Press VOL+ to inc re as e vo lume,or VOL - to decrease.
At the OSD menu, pr es s th ese buttons to move the s el ec ti on
focus left and ri gh t to c hange settings.

Press these buttons to sequentially select channels.
When the OSD menu is on, press these bu tt on s to m ov e th e
selection focus up or down to change se tt in gs .

Press to display all possible input signal sources.
Press to cycle through various sources.

Press this button to display the OSD menu.
When the OSD menu is on, press this button to exit the menu.

Pr es s th is button to tu rn t he u nit on when i t is i n standby mode.
Pr es s th is button onc e mo re t o put it to sta nd by m ode.

-11-

-12-

Main Unit Control

Rear Panel

1234567

Connection and setup

Connecting the Power Cord

Connect the power cord directly to the wall outlet.

Wall outlet

8 8

HDMI1/HDMI2
/HDMI3

YPbPr

R-L-VIDEO VIDEO 1 IN

DIGITAL AUDIO OUT
OPTICAL

LINE OUT

8

9

ANT IN

9 10 11 12 13

USB

Connect the HDMI signal.

Connect the PC VGA signal output of your personal compute r.

DVI or PC VGA audio input.

Connect the component video signal .

Connect the audio and video output of your AV equipment to the
unit using the AV cable included in the spare part.

Connect the OPTICAL to th e Aud io Am pl if ie r us in g a op ti ca l ca bl e.

Connect to the LINE IN of the Audio Amplifier.

Connect USB device,such as USB Disk,USB Wi-Fi Dongle, HID and so on.

Connect to external antenna.

HDMI/VGA/PC Connection

HDMI
Cable

Power c ord

Audio Cable

VGA

10

11

12

13

ETHERNET

SD/MMC

VIDEO 2

AUDIO(R L)

Connect it to the home network.

SD/MMC card reader slot.

Connect the video output jack of AV equipment to the unit

Connect the audio output jack of AV equipment to the unit.

-13-

Blue- Ray D VD or HD ST B

VGA Cable

To ensure the highest quality, we recommend users use our 5.1 blu-ray home theatre system ( SONIQ H10 0)

and HDMI ca bl e ( AAC -HD15 0) .

-14-