Sonance XBWS, XBW User Manual
Sonance Architectural Series
™
Architectural Series™Woofers
Features:
• Truly flush-mount installation — the plane of the speaker
grille is perfectly aligned with the plane of the wall or
ceiling.
• Available in rectangular (X8W), round (X8WR)
and square (X8WS) geometric forms that discreetly
complement interior design elements.
• 8” long-throw carbon fiber woofer cones deliver deep,
powerful bass.
• ¾”-Thick MDF baffle panels (X8W and X8WS) and cast
aluminum woofer baskets (all models) reduce resonances,
maximizing bass clarity and eliminating “boominess.”
• Available Sonamp
®
A800 power amplifier delivers
150 watts of power.
• Flexible amplifier connections make it easy to integrate
Architectural Series Woofers into any audio system.
• Front-panel amplifier controls (volume, crossover
frequency, phase) let you fine-tune the woofer’s
performance to match a variety of listening environments
and personal preferences.
• Requires the installation of an appropriate Architectural
Series Panel Bracket (available separately).
• Each Architectural Series Woofer model can be used with
any separately available Architectural Series Finish
Component: metal (with or without trim) or cloth (with or
without trim).
S
ONANCE
A
RCHITECTURALSERIES
™ W
OOFERS
:
X8WR (
LEFT
); X8WS (
CENTER
); X8W (
RIGHT
),
SURROUNDING
A800 A
MPLIFIER
Sonance Architectural Series™ speakers are the world’s
first trimless and truly flush-mount speakers — perfectly
aligning the plane of the grille with the plane of the wall
or ceiling.
Architectural Series Woofers are available in all three
Architectural Series geometric forms — rectangular,
round and square — so they can be used to enhance the
bass performance of any Architectural Series speaker
installation while maintaining the interior designer’s
vision for the space.
All three models feature long-throw 8” carbon fiber cones
that deliver the deep, powerful bass more commonly
found in free-standing audiophile speakers. Resonances
are minimized by ¾” MDF baffles (on X8W and X8WS
models) and cast aluminum baskets (all models), so bass
remains clear, without any “boominess.”
All three Woofer models are powered by a Sonamp
®
A800 amplifier (available separately) that delivers
150 watts of power. The amplifier provides flexible
connections for easy integration into any audio system.
Front-panel volume, crossover and phase controls allow
the woofer’s performance to be fine-tuned for a variety of
listening environments and personal preferences.
Each Woofer model requires the installation of an
Architectural Series Panel Bracket (available separately).
All three Architectural Series Woofers can be used with
any style Architectural Series Finish Component — metal
(with or without trim) or cloth (with or without trim).
Architectural Series Finish Components are available
separately.
212 Avenida Fabricante
San Clemente, CA 92672-7531 USA
(800) 582-7777 or (949) 492-7777
FAX: (949) 361-5151
Technical Support: (800) 582-0772
WWW.SONANCE.COM
©2007 Sonance, All Rights Reserved.
Sonance, Architectural Series and Sonamp are trademarks or registered trademarks of Dana Innovations.
Due to continuous product improvement, all features and specifications are subject to change without notice.
For the latest Sonance product information, go to:
www.sonance.com
10/07
Sonance Architectural Series
™
Architectural Series™Woofers
Limited Lifetime Warranty:
Sonance warrants to the original retail purchaser only that
this Sonance product will be free from defects in materials
and workmanship, provided the product was purchased
from a Sonance Authorized Dealer. For full warranty
information, please see Instruction Manual.
Specifications:
X8W
Woofer: 8” (203mm) Long-throw carbon fiber
cone with a rubber surround
Frequency Response: 35Hz – 250Hz
Finished Hole Size: 8
3
/
16” x 14¼” (208mm x 362mm)
Shipping Weight: 13 lbs (5.9kg) each
X8WR
Woofer: 8” (203mm) Long-throw carbon fiber
cone with a rubber surround
Frequency Response: 35Hz – 250Hz
Finished Hole Size: 915/
16”(251mm) Diameter
Shipping Weight: 13 lbs (5.9kg) each
X8WS
Woofer: 8” (203mm) Long-throw carbon fiber
cone with a rubber surround
Frequency Response: 35Hz – 250Hz
Finished Hole Size: 915/
16” x 9
15
/
16” (251mm x 251mm)
Shipping Weight: 13 lbs (5.9kg) each
A800 Amplifier (available separately)
Amplifier Power: 150 watts
Controls: Crossover frequency (50Hz ~ 150Hz);
volume, phase (0°/180°)
Amplifier Dimensions: 16¾” x 4” x 13½”
(W x H x D) (425mm x 102mm x 343mm)
Shipping Weight: 20 lbs (9.1kg) each
Architectural Series
Panel Bracket
• B8 (for X8W)
• B8R (for X8WR)
• B8S (for X8WS)
Architectural Series
Finish Component
• Metal (with trim)
• Metal (without trim)
• Cloth (with trim)
• Cloth (without trim)
Required Accessories (available separately):
Loading...