Sonance VPSUB Specification Sheet

VISUAL PERFORMANCE

IN-WALL SUBWOOFER

VPSUB

Overview

Designed to fit any new construction or retro-fit application
in standard 3 1/2” deep wall cavities, the VPSUB delivers
cabinet-level performance in a discreet in-wall form factor.

Key Features

Aesthetics

• Sleek, low profile design consistent with Sonance
Visual Performance Series

Performance

• Massive re-designed motor structure

• Dual Spider Technology (DST) for up to +/- 13mm of
controlled linear excursion

• 4 1/2” (115mm) precision-aligned voice coil with 1 1/2”
(38mm) winding height

• 1.4 lbs (.64kg) N38SH Neodymium magnet

• Custom-tuned DSP settings when paired with a Sonance
DSP amplifier (sold separately)

VPSUB

Installation

• Designed to fit into a standard 3 1/2” wall cavity with 16”
on-center stud configuration

• Simplified single-step grille painting process

• Spring-loaded speaker wire terminals to accept standard
wire or pin connector

VPSUB Grille

Speaker Terminal

Dimensions

Width: 15” (381mm)
Height: 15” (381mm)
Depth: 3 7/8” (98mm)
Cut Out Width: 12 3/4” (324mm)
Cut Out Height: 12 3/4” (324mm)

Height

VPSUB

Cut Out

Height

Specifications

SKU:

Unit of Measure:

Woofer:

Frequency Response:

Impedance:

Sensitivity:

Power Handling:

Shipping Weight:

Required Amplification:

Width

93353
Each
10” (254mm) laminated carbon
fiber cone with a rubber surround
34Hz - 250Hz ±3dB
8 Ohms nominal
90dB SPL (2.83v/1 meter)
260 Watts
13 lbs (6kg) each
Sonamp DSP 2-150 or
Sonamp DSP 8-130 MKII
(Using two channels bridged)

Depth

Cut Out

Width

Recommeneded Products

Sonamp DSP 2-150 Amplifier

SKU 93093

LIMITED LIFETIME WARRANTY

Sonance warrants to the first end-user purchaser that this Sonance-brand product (“Product”), when purchased from an authorized Sonance Dealer/
Distributor, will be free from defective workmanship and materials for the life of the Product, except for the grille, which is warranted for five (5) years.
Sonance will, at its option and expense, either repair the defect or replace the Product with a new or remanufactured Product or a reasonable equivalent.

Please visit our website and owner’s e-Manual for complete warranty and exclusion information.

©2017 Sonance. All rights reserved. Sonance and Visual Performance are registered trademarks of Dana Innovations.

Due to continuous product improvement, all features and specifications are subject to change without notice.
For the latest Sonance product specification information visit our website: www.sonance.com

SONANCE • 991 Calle Amanecer • San Clemente, CA 92673 USA [phone] • FAX: [phone] • Technical Support: [phone]

www.sonance.com

Sonamp DSP 8-130 MKII Amplifier

SKU 93331

11.09.17