Sonance VP67 LCR User Manual
Sonance Visual Performance®Series
VP67LCR Home Theater Speaker
Specifications:
Sonance Visual Performance VP67LCR
Tweeter: 1” (25mm) Aluminum dome,
Ferrofluid-cooled
Woofer: Two 6½” (165mm) Coated carbon
fiber cones with rubber surrounds
and extended pole pieces
Frequency Response: 43Hz – 20kHz ±3dB
Impedance: 6 ohms nominal; 4 ohms minimum
Power Handling: 5 watts minimum;
140 Watts maximum
Sensitivity: 90dB SPL (2.83V/1 meter)
Grille Material: Perforated Steel
Adjustments: ±3dB tweeter level
Grille Dimensions (W x H): 16” x 8
3
/
8
” (406mm x 213mm)
Mounting Depth: 3
9
/
16” (91mm)
Cutout Dim (W x H): 14
5
/
8
” x 6
7
/
8
” (371mm x 175mm)
Shipping Weight: 8 lbs. (3.6kg) Each
Features:
• Micro flange steel grille has only 0.20” of ABS trim
for a sleek, modern appearance. Powerful
neodymium magnet grille attachment eases
installation.
• Traditional dual woofer/single tweeter home
theater speaker configuration.
• Visually and sonically matches other Sonance
Visual Performance
®
Series speaker models.
• Dual carbon fiber cone woofers produce deep,
powerful bass and provide high-output
low-distortion music and film dialog.
• Fits standard 16” on-center stud construction.
• Exclusive new FastMount
®
tabs hold the speaker in
the mounting hole during installation, allowing the
installer to let go of the speaker to pick-up tools or
other items.
• The Rotolock
®
mounting system makes installation
quick and easy.
• A three position tweeter adjustment switch lets
you balance the speaker’s high-frequency energy
to better complement the room’s setup and
acoustics.
• Grilles and frames can be painted together, saving
installation time.
VP67LCR
(
WITHOUT
G
RILLE
)
Sonance Visual Performance®Series speakers combine
elegant, modern style with outstanding audio performance.
New micro flange grilles have only 0.20” of trim, giving
these speakers a clean, sleek appearance that seamlessly
integrates into any designed space. The grilles attach via
powerful magnets, for simple, quick installation. A onestep paint process saves time compared to traditional
flanged speakers.
Incorporating the same drivers as the VP67 and VP67R but
in a traditional dual-woofer/single-tweeter home theater
speaker format, the VP67LCR makes an ideal centerchannel counterpart for any Visual Performance series left
and right channel speaker pair in small or medium-sized
home theater systems. And by using the VP67LCR in all
three front-channel positions (left, center and right) and
other Visual Performance series speakers as surround
channels, an exceptionally high-performance home theater
system can be assembled.
Installation is quick and easy thanks to the RotoLock
®
mounting system. Exclusive FastMount®tabs hold the
speaker in the mounting hole during installation, allowing
the installer to let go of it to pick-up tools or other items.
And the VP67LCR is designed to fit between standard 16”
on-center studs (the standard stud spacing in the USA).
212 Avenida Fabricante
San Clemente, CA 92672-7531 USA
(800) 582-7777 or (949) 492-7777
FAX: (949) 361-5151
Technical Support: (800) 582-0772
WWW.SONANCE.COM
®2008 Sonance, All Rights Reserved.
Sonance, Visual Performance, FastMount and RotoLock are trademarks or registered trademarks of Dana Innovations.
Due to continuous product improvement, all features and specifications are subject to change without notice.
For the latest Sonance product information, go to:
www.sonance.com
05/08
16”
(407mm)
14
5
/8”
(371mm)
6
7
/
8
”
(175mm)
3
9
/
16
”
(91mm)
8
3
/
8
”
(213mm)
Dimensions:
Sonance Visual Performance®Series
VP67LCR Home Theater Speaker
Limited Lifetime Warranty:
Sonance warrants to the original retail purchaser only that this
Sonance product will be free from defects in materials and workmanship, provided the product was purchased from a Sonance
Authorized Dealer. For full warranty information, please see the
Instruction Manual.
Loading...