Sonance Cinema Ultra II LCR User Manual

Sonance Cinema®Series

Cinema Ultra II LCR Cabinet

SPECIFICATIONS

Cinema Ultra II LCR Cabinet

Tweeter 1" (25mm) Silk dome, Ferrofluid-cooled,

shielded magnet

Midrange Two 3” (76mm) One-piece black aluminum

cones, rubber surrounds, shielded magnets

Woofer 8" (203mm) One-piece black aluminum

cone, rubber surround, shielded magnet

Frequency Response 70Hz – 20kHz ±3dB

Impedance 6 Ohms nominal; 4 Ohms minimum

Power Handling 5 watts minimum; 200 Watts maximum

Sensitivity 90dB SPL (2.83V 1 meter)

Baffle & Back Panel Material 1” MDF

Top,Bottom & Side Panel Material Laminate (½” MDF / ½” particle board)

Grille Material Black cloth

Adjustments ±3dB Tweeter level, boundary compensation

Dimensions (W x H x D) 101/8" (257mm) x 183/8" (467mm) x 11½" (292mm)

Shipping Weight 35 lbs. (15.9 KG) each

Sonance Cinema Ultra II®LCR Cabinet Speakers

Sonance Cinema Ultra II® LCR Cabinet speakers offer the
ultimate in cinema performance to those who can’t use Sonance
in-wall speakers. In fact, earning THX® Ultra 2 certification
guarantees that in rooms over 3,000 cubic feet, Cinema Ultra II
LCR Cabinet speakers will reproduce film soundtracks precisely
as their filmmakers intended them to sound.

The new enclosure is a key to the Cinema Ultra II LCR Cabinet
speaker’s superior performance. The 1”-thick MDF baffle and
back panels maintain ultra-high rigidity and banish
resonances. An exclusive laminate made-up of ½” MDF and ½”
particle board maximizes stiffness and reduces resonances in the
top, bottom and side panels.

Sonance Cinema Ultra II LCR Cabinet speakers establish the
benchmark for home entertainment performance, and are ideal
for both multi-channel home theater and music applications.

Features:

• Cabinet configuration offers top-of-the-line Sonance quality
and performance to listeners who can’t use in-wall speakers.

• THX

®

Ultra 2 certification guarantees cinema-quality

performance in even the largest home theater rooms.

• Same drivers and voicing as Cinema Ultra II in-wall speakers
allows mix-and-match between in-wall and cabinet versions
while maintaining character and quality of ‘Sonance sound’.

• Rotating tweeter/midrange array allows horizontal placement.

• Ultra-rigid 1” MDF baffle and back panels minimize resonances.

• Cabinet top, bottom & sides made from an exclusive laminate
of ½” MDF and ½” particle board, for superior stiffness and
resonance damping.

• Extensive cross-bracing maximizes enclosure stiffness.

• Tweeter level control and boundary compensation control
fine-tune performance for a variety of installations.

www.sonance.com

212 Avenida Fabricante
San Clemente, CA 92672-7531 USA
[phone] or [phone]
FAX: [phone]
Technical Support: [phone]

DIMENSIONS

Cinema Ultra II
LCR Cabinet Speaker

©2004 Sonance, All Rights Reserved. Sonance, Sonance Cinema Ultra II and RotoLock are trademarks of Sonance. THX and THX Select are trademarks or registered trademarks of THX, LTD.

All specifications are subject to change without notice. 09/04