SOMFY 1810643, Telis 1 RTS Patio, 1810632, Telis 1 RTS Pure, 1810633, Telis 5 RTS Pure, 1810645, Telis 5 RTS Patio, 1810639, Telis 1 RTS Silver Operating Instructions Manual
...
SOMFY
TELIS RTS REMOTES
SINGLE & FIVE CHANNEL
Part #’s
1810632 Telis 1 RTS Pure
1810633 Telis 5 RTS Pure
1810639 Telis 1 RTS Silver
1810641 Telis 5 RTS Silver
1810650 Telis 1 RTS Lounge
1810652 Telis 5 RTS Lounge
1810643 Telis 1 RTS Patio
1810645 Telis 5 RTS Patio
OPERATING INSTRUCTIONS
UP
STOP
DOWN
Indicator
LED
Light
my
Single Channel
Version
UP
STOP
DOWN
LED Lights
Channel
Selector
my
Version
Programming
Button
BACK
BACKFive Channel
1. Select the shade to operate by
pressing the Channel Select Button.
The small LED lights will light up each
time the Channel Select Button
is pressed to show what channel
is being operated.
3. To lower your window shade or
extend your awning, simply press
the down ( ) button.
2. To raise your window shade
or retract your awning, simply
my
my
LED Lights
Channel
Selector
press the up ( ) button.
4. If you want to stop your shade
or awning while it is moving, press
the center ( ) button.
my
SETTING FAVORITE POSITION
1. Select the shade to operate by
pressing the Channel Select Button.
The small lights will light up each
time the Channel Select Button
is pressed to show what channel
is being operated. The fifth
channel is activated when all 4
lights illuminate.
© SOMFY SYSTEMS, INC. 7/2009
2. Using the up or down buttons,
bring the shade or awning to
your favorite position, for example
mymy
halfway down or out. Press The
center button to stop the shade
or awning.
Channel
Selector
SETTING FAVORITE POSITION...cont’d
3. Press and hold the center ( )
my
button for 2 seconds to record
the position.
ADDING A NEW REMOTE
1. With your current remote, select
the shade to operate by pressing
the Channel Select Button. The
small LED lights will light up each
time the Channel Select Button
is pressed to show what channel
is being operated.
4. To reach your favorite position,
press the center ( ) button
my
whenever the shade is already
stopped. The shade or awning
will automatically go to that
position.
2. Using a paper clip or pen,
press and hold the programming
button on the back of the remote
until your window shade jogs
mymy
Channel
Selector
up then down.
Programming
Button
BACKBACK
3. Get the new remote and select
the new channel.
REPLACING THE BATTERY
1. Using a small screwdriver loosen the
screws on the reverse side of the remote
control and remove the back cover.
4. Using a paper clip or pen, press
mymy
and hold the programming button
on the back. The window shade
will jog. This remote will now
operate your shade or awning.
Programming
Button
BACKBACK
2. Replace the battery with one
2430 Lithium 3V battery.
NOTE: IN CASE OF A LOST TRANSMITTER, PROFESSIONAL
PROGRAMMING ASSISTANCE IS REQUIRED. PLEASE CONTACT
SOMFY AT somfytech@somfy.com OR YOUR LOCAL DEALER
AT www.somfysystems.com/en-us/home/where-to-buy.html
© SOMFY SYSTEMS, INC. 7/2009
dealerlocator.
TI N
B Y
Loading...