Soleus Air PE7-10R-03 User Manual

Portable Air Conditioner with
Evaporative Technology
PE7-10R-03
Operating Instructions
3046364
Model No. PE7-10R-03
© 2012Soleus Air International
For your own records, please attach a copy of your sales receipt to this manual. Also, write the store name/location, date purchased, and serial number below:
Store Name: ____________________________________________________
Location: ______________________________________________________
Date Purchased: _________________________________________________
Serial Number (located on back of unit): ______________________________
IMPORTANT INSTRUCTIONS
Before installing and using your portable air conditioner, please read this owner’s manual carefully. Store this manual in a safe place for future reference.
1) Always place the unit on a level surface.
2) Never use or store gasoline or other flammable vapor or liquid near this unit unless instructed by this manual.
3) Maintain at least 10 inches (25 cm) clearance space around this unit. Do not block or cover air inlet or outlet grilles.
4) The unit must be connected to a correctly grounded power supply.
5) Do not start or stop the unit by inserting or pulling out the power plug.
6) Do not use an adapter plug or extension cord.
7) Do not use the unit in the immediate surroundings of a bath, a shower or a swimming pool.
8) Do not insert anything into the air outlet. Do not obstruct air inlet or outlet grills unless instructed by this manual.
9) Do not let children play near this unit.
10) Always inspect the cord for signs of damage before use. If the power cord is damaged, it must be replaced by the
manufacturer or a qualified service technician.
11) When cleaning the unit, always turn the unit off and unplug the power cord.
12) When the unit is not in use, always remove the venting kit from window.
13) Do Not Mix Old And New Batteries. Do Not Mix Alkaline, Standard (Carbon - Zinc), Or Rechargeable (Nickel -
Cadmium) Batteries.
2
PACKAGE CONTENTS & SPECIFICATIONS
What’s in the Box:
Portable Air Conditioner Exhaust Hoses (1) Hose Adapters (1) Window Kit Adapter (1) Remote Control AAA Batteries (2) Window Kit - 3 Sliding Panels (1 single hose panel, 2 extension panels) Owner’s Manual
SPECIFICATIONS
The cooling capacity is measured at an ambient temperature of DB 86 °F, WB 78 °F.
Noise level is measured at a distance of 3.28 ft away from the front of the unit, when the unit is in cooling mode.
Power consumption is measured when the fan runs at the highest speed setting.
These specifications are for reference only. For actual data, please refer to the rating label on the back of the unit.
If the environment temperature is higher than the max operating temperature or lower than the minimum operating temperature,
the air conditioner may not work properly.
MODEL PE7-10R-03
Cooling Capacity 10,000 BTU/Hr
Cooling Power Consumption 1060 Watts
Dehumidifying Capacity (Pints per day) 48 Pints/Day
Air Flow Volume (CFM) 265 CFM
Power Source 115 V / 60 HZ
Rated Current 9.3 Amps
Sound Pressure Level 45 dB (A)
Product Weight 56.2 lbs
Product Dimensions (W x D x H)
11.75” W x 18.75” D x 24.875” H
Refrigerant R-410A
DISCLAIMER
ALL INFORMATION AND THE TECHNICAL SPECIFICATIONS PRESENTED IN THIS USER’S MANUAL ARE THE PRESENTATION OF THE MANUFACTURER. SOLEUS INTERNATIONAL HAS NOT CONDUCTED INDEPENDENT TEST TO THE INFORMATION AND THE SPECIFICATIONS PRESENTED HEREWITHIN.
3
PRODUCT DIAGRAM
NOTE: Actual product design may differ slightly from images below.
FRONT
A. Control panel B. Vertical air louvers C. Air outlet D. Horizontal air louvers E. Casters F. Power Cord & Plug
BACK
A. Hot air outlet grill B. Lower air inlet grill
ACCESSORIES
Flexible exhaust hose with 2 adapters
• 3-piece set
• stretches from 14 1/4” to 60 5/8” (36cm to 150cm)
Adjustable window slider kit
• 3-piece set
• adjusts 19.7” - 55.5” (50cm to 141cm) Drain tube
4
INSTALLATION
SELECTING THE LOCATION
Place the unit in a flat location where the air out­lets are not obstructed. Place the unit at least 20” (50cm) away from a wall or other obstacle.
MOUNTING THE EXHAUST HOSE
Slide the square end of the exhaust duct over the hot air outlet on the back of the unit.
The exhaust hose should be kept as short and straight as possible. Prevent any sharp bends in the exhaust hose, as this will trap hot exhaust air.
The hot exhaust air can be vented through the wall or out a window. If mounting in the wall, the height of the hole should be 14 1/4” to 60
5/8” (36cm to 150cm)
.
Soleus Air does not provide a venting kit for through the wall ventilation. Venting through the wall requires a custom installation.
5
Loading...
+ 9 hidden pages