Soleus Air PE1 09R-30 User Manual

9,000 BTU Portable Air Conditioner

PE1-09R-30

Operating Instructions

Model No. PE I-O9R-30

Thank you for choosing a Soleus Air PE1-09R-30 Portable Air Conditioner. This owner's manual will provide you with valuable information necessary for the proper care and maintenance of your new

product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new Soleus Air Portable Air Conditioner.

For your own records, please attach a copy of your sales receipt to this manual. Also, write the store

name/location, date purchased, and serial number below:

Store Name:

Location:

Date Purchased:

Serial Number (located on back of unit):

IMPORTANT INSTRUCTIONS

Before installing and using your portable air conditioner, please read this owner's manual carefully. Store this manual in a safe place for future reference.

1) Always place the unit on a level surface.

2) Never use or store gasoline or other flammable vapor or liquid near this unit unless instructed by this manual.

3) Maintain at least 10 inches (25 cm) clearance space around this unit. Do not block or cover air inlet or

outlet grilles.

4) The unit must be connected to a correctly grounded power supply.

5) Do not start or stop the unit by inserting or pulling out the power plug.

6) Do not use an adapter plug or extension cord.

7) Do not use the unit in the immediate surroundings of a bath, a shower or a swimming pool.

8) Do not insert anything into the air outlet. Do not obstruct air inlet or outlet grills unless instructed by this manual.

9) Do not let children play near this unit.

10) Always inspect the cord for signs of damage before use. If the power cord is damaged, it must be replaced by the manufacturer or a qualified service technician.

11) When cleaning the unit, always turn the unit offand unplug the power cord.

PACKAGE CONTENTS

Portable Air Conditioner Exhaust Hoses (2)

Hose Adapters (2) Window Kit Adapter (2)

Remote Control AAA Batteries (2)

Window Kit - 3 Sliding Panels (1 dual hose panel, 2 extension panels) Air Intake and Outlet Covers (2)

Owner's Manual

WARNING: This unit has a voltage rating of 115 volts. The cord has a plug as shown in A. An adapter as shown in C is available for connecting three-blade

I;IT,_R fir G_Le4_D

grounding-type plugs to two-slot receptacles. The grounding lug extending from the adapter must be con-

nected to a permanent ground such as a properly

grounded outlet box. The adapter should not be used if

a three-slot grounded receptacle is available.

SPECIFICATIONS

• The cooling capacity is meas-

ured at an ambient temperature of DB 86 °F, WB 78 °F.

• Noise level is measured at a

distance of 3.28 ft away from the front of the unit, when the

unit is in cooling mode.

• Power consumption is meas-

ured when the fan runs at the

highest speed setting.

• These specifications are for

reference only. For actual data, please refer to the rating label

on the back of the unit.

• If the environment temperature

is higher than the max operat- ing temperature or lower than

the minimum operating tem-

perature, the air conditioner

may not work properly.

DO NOT DEFEAT THE SAFETY PURPOSE OF THE GROUNDED PLUG.

MODEL

COOLING CAPACITY HEATING CAPACITY

DEHUMIDIFYING CAPACITY

POWER COOLING

HEATING

AIR FLOW VOLUME

POWER SOURCE

SOUND PRESSURE LEVEL

NET WEIGHT

OPERATING COOLING

TEMPERATURE HEATING

ASSEMBLED

DIMENSIONS

PACKAGE

REFRIGERANT

PE1-09R-30

9,000 BTU/H

1200 Watts

50 pts/Day

980 W

1350W

177 CFM

115V~60 HZ

9/12 AMP

HEATING/COOLING

46 dB(A)

75 Lbs

60.8°F-108°F 23T-89.6_F

17.75" W x 18.25" D x 32.5" H 21" W x 18.5" D x 34.5" H

R22

PRODUCT DIAGRAM

Signal Rece

rn= 11 I

Control Panel

• Back

Filter Compartment

Air Ou

Drain Port

Evaporator Air Intake

Air Intake Hose

PARTS & ASSEMBLY

PARTS

EXHAUSTHOSE

Hose Adapter

WINDOW KIT

Exhaust Hose

Window Kit

Adaptor

ASSEMBLY & INSTALLATION

INSTALLATION

When the unit is operating as an air conditioner or dehumidifier, the unit draws in fresh outdoor air and exhausts hot air out of the room to complete the air exchange. When the unit is operating in fan or heater modes, no outdoor air exchange

takes place. The window kit and exhaust hose do not need to be installed when the unit is used as a fan or heater.

NOTE: The supplied window kit can be installed in sliding windows and sliding glass doors up to 8 ft. long (approximate length).

MOUNTING THE EXHAUST HOSES

• Choose a suitable location, near a grounded electrical outlet and suitable window or door. Remove packaging and locate components.

• Extend both ends of the exhaust hoses approximately 6 inches.

• Screw the window kit adapter onto one end of the exhaust hose clockwise. Screw the hose adapter onto

the other end of the exhaust hose clockwise. Repeat on the other exhaust hose.

• Remove outlet covers from the back of the unit by screwing them counter-clockwise, then lifting up.

• Mount the exhaust hoses onto the back of the unit by locking the hose adapters into place.

+ 9 hidden pages