Socket Mobile D740, D760 User Manual
DURASCAN
®
socketmobile.com
Bluetooth® wireless technology
Model D740/D760
D740/D760 USERGUIDE
barcode scanner
www.socketmobile.com
Package Contents 4
TABLE OF CONTENTS
Product Information 5
How to Charge the Battery 7
Optional Charging Accessories 8
Powering on/off 9
Scanning Barcodes 10
Bluetooth Connection Modes 11
How to setup your scanner:
Download our Companion App for Apple® and Android Device 13
Can’t use Companion App?
How to setup your scanner in Basic Mode
• Basic Mode 14
How to setup your scanner in Application Mode:
• Apple® 15
• Android 17-18
• Windows (option 1) or Android 17
• Windows (option 2) or Android 7.0 and lower 19
Auto Scan Mode 20
Bluetooth Unpairing 22
Factory Reset 23
Restore Method 24
Bluetooth Reconnection 25
TABLE OF CONTENTS
Status Indicators 26-29
Product Specifications 30-31
Helpful Resources 32
Battery Warning, Safety, Compliance, Warranty 33-43
Command Barcodes 44-49
PACKAGE CONTENTS
YOUR BARCODE SCANNER
Set up your scanner with
Socket Mobile Companion App
More at: socketmobile.com/companion
GET STARTED WITH
Download for Free!
DuraScan
Lanyard
Charging Cable
Insert Card
D740/D760
Thank you for choosing Socket Mobile!
Let’s get started!
© 2018 Socket Mobile, Inc. All rights reserved. Socket®, the Socket Mobile logo, SocketScan®,
DuraScan®, Battery Friendly® are registered trademarks or trademarks of Socket Mobile, Inc. Microsoft® is a registered trademark of Microsoft Corporation in the United States and other countries.
Apple®, iPad®, iPad Mini®, iPhone®, iPod Touch®, and Mac iOS® are registered trademarks of Apple,
Inc., registered in the U.S. and other countries. The Bluetooth® Technology word mark and logos are
registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Socket Mobile,
Inc. is under license. Other trademarks and trade names are those of their respective owners.
PRODUCT INFORMATION
Scanner head
Scan Indicator Light
Bluetooth Light (Blue)
Battery Light (Green/Yellow/Red)
Scan button
Power button*
Power Connector
Made with antimicrobial additives for protection against harmful microbes.
Socket Mobile’s barcodes scanners can be wiped clean with a cloth dampened with isopropyl
alcohol or water. Or, the barcode scanners can be wiped clean with a Sani-Cloth.
Warning: DO NOT IMMERSE IN WATER (scanner’s mechanics could be damaged)
DO NOT USE BLEACH FOR CLEANING (scanner’s material property may be affected)
Product label
Stand Attachment
Lanyard Eyelet
Charging pins
*Also used to display the on-screen keyboard in Basic Mode (iOS only).
5
How to Attach the Lanyard (optional)
ATTACH LANYARD
1. Detach the string loop of the tether from the lanyard.
2. Feed the string loop through the eyelet.
3. Pull tight so the string loop is secure.
4. Reattach the string loop to the tether from the lanyard.
6
HOW TO CHARGE THE BATTERY
“Beep Beep”
Rubber Flap
To open
The scanner must be fully charged before rst use. Please allow 6 hours
uninterrupted charging for the initial battery charge.The scanner will
stop charging once the battery is full (no overcharging occurs).
Lift the rubber ap to access the power connector.
• Yellow/Amber Light = Charging
• Green Light = Fully charged
Important:
Charging from a computer USB port is not recommended.
7
Available separately
OPTIONAL CHARGING ACCESSORIES
Available separately
Charging Cradle Charging Stand
Charging Dock
For all optional accessories visit our Socket Store.
For all optional accessories visit our Socket Store.
AC Power Supply
International Adapters
available
8
POWERING ON/OFF
Power button
Powering On:
Press and hold down the small
power button until the Battery
light turns on and the scanner
beeps twice (low-high).
Powering Off/ Disconnecting:
Press and hold down the small
power button until the scanner
beeps twice (high-low) and lights
turn off.
The scanner will power off automatically if device is not connected within 5 minutes. Scanner
connected to a device will power
off within 2 hours if idle/inactive.
9
D740/D760
SCANNING BARCODES
2D/1D Barcode
Aim at the center.
Scan button
D760 only
Passport
Aim at the center.
Scanning Barcodes
1. Hold the scanner a few inches from the barcode.
2. Aim, press and hold the scan button.
By default, the scanner will beep, vibrate, and the scan indicator will
ash green to conrm a successful scan. The D760 default is setup to
scan 2-line passports.
Caution: Do not stare directly into the scanner light beam.
10
Connect your scanner using one of the following Bluetooth connection
BLUETOOTH CONNECTION MODES
modes:
Bluetooth Connection Proles
Bluetooth Mode Description
Basic Mode (HID)
(Default)*
Human Interface
Device Prole
Application Mode
(SPP)
Serial Port Prole
Application Mode
(MFi-SPP)
Apple Specic
Serial Prole
• NO software installation required
• Connects to most devices
• Good for barcodes containing small amounts of
data
• Scanner interacts with host device like a keyboard
For Android or Windows
• Software installation is required
• More efcient and reliable data communications
for barcodes containing lots of data
• If you have an application that supports Socket
Mobile Scanners this is the mode recommended
For iOS Devices
• Must use with an App developed to work with
iOS devices
• Software installation is required
• If you have an iOS application that supports
Socket Mobile Scanners this is the mode you want
to use
*By default, the scanner is set to Basic Mode (HID).
11
Operating System Connection Options
BLUETOOTH CONNECTION MODES
Bluetooth
Operating
Systems
(OS)
Android
Apple iOS
Windows PC Windows 7, 8, 10 Yes Yes N/A
Mac OS
Note: To switch from one mode to the other you must remove the
pairing information from both devices - host computer and the scanner.
(see unpairing procedure on page 22)
Devices
Android 4.0.3 &
later
iPod, iPhone, &
iPad
Mac OS X 10.4 to
10.X
Mac Books, Mac
Mini, & iMac
Bluetooth
HID
Support
Yes Yes N/A
Yes N/A Yes
Yes No N/A
Bluetooth
SPP
Support
Apple
Serial
Specic
(MFi Mode)
12
To assist in scanner setup & conguration
COMPANION APP
Download the Companion App for free!
Socket Mobile’s Companion App will help you
congure and check the status of your
Socket Mobile barcode scanners.
• Easy to follow instructions for pairing scanners
in Application Mode
• Verify scanner status
• Check warranty and register scanners
Learn more about Application Mode.
Scan this QR code with your mobile
device to download our new app!
Scan this QR code with your mobile
device to download our new app!
13
BASIC MODE
Connect Device in Basic Mode
In this mode the scanner functions and communicates similar to a
keyboard. Therefore, the scanner will work with Notes, and any other
application that supports an active cursor.
1. Power on the scanner. Make sure the scanner is
discoverable (unpaired).
2. Go to Settings | Bluetooth.
3. Make sure the device has Bluetooth “On” and scan for devices.
4. In the list of found devices, tap D740 or D760 [xxxxxx] to Pair.
5. The scanner will connect to the host device.
6. The scanner will beep once after it has connected.
*If you have trouble connecting or pairing with host device, turn host
device’s Bluetooh off/on, and/or perform factory reset on the scanner
(see page 50).
Now you are ready to scan barcodes!
14
APPLICATION MODE
Connect Apple iOS device in Application Mode
Please check with your scanner application vendor or visit
www.socketmobile.com/appstore to conrm your scanner-enabled
application supports the scanner.
If you are using the scanner with an Apple iOS device and a
scanner-enabled Application that does not provide instructions how to
connect your scanner, please use the following steps.
1. Power on the scanner. Make sure the scanner is discoverable
(unpaired).
2. To change the prole to Application Mode scan this barcode. The
scanner will beep 3 times.
Use with iPad, iPod touch, and iPhones.
(Scanning this barcode changes the connection mode)
3. Go to Settings | Bluetooth.
4. Make sure the device has Bluetooth “On” and scan for devices.
15
Loading...