Snapper YZ20485BVE, YZ18425BVE, YZ20486BVE, YZ18426BVE User Manual

Parts Manual fo

r

Z

E

E

E

E

SCRAMBLER 42" & 48" HYDRO DRIVE Y

SERIES 5 & 6

MODEL

YZ18425BV
YZ18426BV
YZ20485BV
YZ20486BV

COPYRIGHT © 2005
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.

Revision 3,

McDonough, GA, 30253 U.S.A.

7/26/2005

Manual No. 7006176

TP 400-5008-3-HZ-N

s

PAGE GROUP

4
6

8
10
12
16
18
20
24
26
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60

CASTER, FRONT WHEEL & TIRE ASSEMBLY
WHEELS- REAR
42" FRONT FRAME & COVER ASSEMBLY
48" FRONT FRAME & COVER ASSEMBLY
REAR FRAME ASSEMBLY
JOYSTICK & OPERATOR SEAT ( Par t 1)
JOYSTICK & OPERATOR SEAT ( Par t 2)
FENDER & TRANSAXLE ASSEMBLY
BRAKE/CLUTCH LEVER ASSEMBLY
ENGINE COMPONENTS
CLUTCH ASSEMBLY
42" DECK LIFT HANDLE ASSEMBLY
48" DECK LIFT HANDLE ASSEMBLY
42" MOW ER DECK ASSEMBLY (Part 1)
42" MOW ER DECK ASSEMBLY (Part 2)
42" MOW ER DECK ASSEMBLY (Part 3)
48" MOW ER DECK ASSEMBLY (Part 1)
48" MOW ER DECK ASSEMBLY (Part 2)
42" SPINDLE ASSEMBLY
48" SPINDLE ASSEMBLY
DECALS (Part 1)
DECALS (Part 2)
ELECTRICAL COMPONENTS (Par t 1)
ELECTRICAL COMPONENTS (Par t 2)
WIRING SCHEMATIC (18 hp engine)
WIRING SCHEMATIC (20 hp engine)

Table Of Content

SERIES 5 & 6

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

3

TP 400-5008-3-HZ-N

CASTER, FRONT WHEEL & TIRE ASSEMBLY

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

4

SERIES 5 & 6

CASTER, FRONT WHEEL & TIRE ASSEMBLY

p

y

Part No Descri

1 7059090 2 ASSEMBLY, Front Wheel & Tire (Complete) (Includes Items 2

thru 5)
2 7035618 1 TIRE, 11 x 4.00-5, Smooth Tread per front wheel & tire assembly
3 7039477 1 RIM, 5.00 Dia. x 3.00 per front wheel & tire assembly
4 7076998 1 LUBE FITTING, 1/4-28 Thread Forming Was 29275, per front wheel &

5 7012234 1 VALVE STEM, Air (Snap-in) per front wheel & tire assembly
6 7012709 2 RING, 1” External Retaining
7 7023556 4 BUSHING, Caster Was 46626
8 7013864 2 LUBE FITTING, Straight (press-fit for .187 dia. Hole)
9 7041783 2 WELDMENT, Pivot Yoke, Caster

10 7090839 2 NUT, 7/16-14 Hex Center Lock, GR5 or B
11 7035359 2 TUBE, 5/8 O.D. x 14 Ga x 4.51
12 7035358 4 BEARING, Ball, 5/8 x 1-3/8”
13 7091772 2 SCREW, 7/16-14 x 6” Hex Head Cap, GR5

tionItem Qt

Note

tire assembly

Footnotes:

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

5

TP 400-5008-3-HZ-N

WHEELS- REAR

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

6

SERIES 5 & 6

WHEELS- REAR

p

y

Part No Descri

1 7058959 2 ASSEMBLY, Rear Tire & Rim, 18 x 9.50-8, Multi-Trac ( Incl. 2A,

3A & 7)

7058948 2 ASSEMBLY, Rear Tire & Rim (Includes items 2B, 3B & 7) used on 42” Deck Models

2A 7072706 1 TIRE, 18 x 9.50-8, Multi-Trac Was 46339, per rear wheel &

2B 7046322 1 TIRE, 18 x 8.50-8, Multi-Trac per rear wheel & tire assembly
3A 7039468 1 RIM, 18 x 8.50 Wheel w/25mm Hub I. D. per rear wheel & tire assembly
3B 7039468 1 RIM, 18 x 8.50 w/25mm Hub per rear wheel & tire assembly

4 7072028 2 WASHER, 1.56 x 1.054 x .047 Flat
5 7091764 2 KLIPRING, 1” External (Waldes Truarc 5304-100)
6 7011022 2 HUB CAP
7 7012234 1 VALVE STEM, Air (Snap-in) per rear wheel & tire assembly
8 7042940 2 KEY, Square M6 x 38mm

tionItem Qt

Note

used on 48” Deck Models

tire assembly

Footnotes:

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

7

TP 400-5008-3-HZ-N

42" FRONT FRAME & COVER ASSEMBLY

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

8

SERIES 5 & 6

42" FRONT FRAME & COVER ASSEMBLY

p

y

Part No Descri

1 7059380 1 WELDMENT, Front Frame Series 3
2 7075910 1 PLATE, Footrest Support
3 7090595 6 BOLT, 5/16-18 x 3/4” Hex Flange Lock
4 7091601 5 NUT, 5/16-18 Hex Flange Lock, GR5 Was 91070
5 7028260 2 FASTENER, “U” Type
6 7090324 2 SCREW, 3/8-16 x 1” Hex Washer Self-tap
7 7090517 2 WASHER, 3/8” FLAT (wide)
8 7035375 2 SPACER, Front Frame Pivot
9 7035374 1 PLATE, Front Frame Slip

10 7075841 1 FLOOR PAN, HOZ
11 7075219 1 FOOTREST, HOZ
12 7091890 4 WASHER, 1/4” Internal/External Lock
13 7023341 2 KNOB (1/4-20 thread)
14 7075885 1 MAT, Floor
15 7041818 3 PAD, Floor Board Support
16 7075993 1 DECAL, Warning, Read Manuals & Instructions see decal page
17 7046426 1 DECAL, Deck Height see decal page
18 7071916 1 DECAL, SNAPPER (14.56” long)

tionItem Qt

Note

Footnotes:

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

9

TP 400-5008-3-HZ-N

48" FRONT FRAME & COVER ASSEMBLY

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

10

SERIES 5 & 6

48" FRONT FRAME & COVER ASSEMBLY

p

y

Part No Descri

1 7059380 1 WELDMENT, Front Frame Series 3
2 7075910 1 PLATE, Footrest Support
3 7090595 6 BOLT, 5/16-18 x 3/4” Hex Flange Lock
4 7091601 5 NUT, 5/16-18 Hex Flange Lock, GR5 Was 91070
5 7028260 2 FASTENER, “U” Type
6 7090324 2 SCREW, 3/8-16 x 1” Hex Washer Self-tap
7 7090517 2 WASHER, 3/8” FLAT (wide)
8 7035375 2 SPACER, Front Frame Pivot
9 7035374 1 PLATE, Front Frame Slip

10 7075841 1 FLOOR PAN, HOZ
11 7075219 1 FOOTREST, HOZ
12 7091890 4 WASHER, 1/4” Internal/External Lock
13 7023341 2 KNOB (1/4-20 thread)
14 7075885 1 MAT, Floor
15 7041818 3 PAD, Floor Board Support
16 7075993 1 DECAL, Warning, Read Manuals & Instructions see decal page
17 7046426 1 DECAL, Deck Height see decal page
18 7071916 1 DECAL, SNAPPER (14.56” long)
19 7047099 2 BRACKET, Saddle
20 7091573 4 BOLT, 1/4-20 x 5/8” Short Square Neck Carriage Was 90551
21 7091584 6 NUT, 1/4-20 Hex Flange Lock Was 90583
22 7059240 1 WELDMENT, Front Lift, 48
23 7022717 1 ROD, Deck Support
24 7017847 1 RING, .438 External Retaining
25 7047060 1 WELDMENT, Rear Lift
26 7074256 1 TIMING ROD, 48 (1/2-13 thread)
27 7091598 1 PIN, 1/8 x 1” Cotter Was 90041
28 7090667 1 WASHER, 1/2 SAE Flat
29 7046599 1 SWIVEL, .50 Thru Hole
30 7091894 1 NUT, 1/2-13 Hex Center Lock, GR5 or B
31 7091947 1 HAIR PIN, 1/8 x 1/2”
32 7090250 2 WASHER, 1/2” SAE Flat

tionItem Qt

Note

Footnotes:

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

11

TP 400-5008-3-HZ-N

REAR FRAME ASSEMBLY

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

12

SERIES 5 & 6

REAR FRAME ASSEMBLY

p

y

Part No Descri

1 7041782 1 WELDMENT, Rear Frame
2 7035368 2 CUSHION, Seat Support
3 7035369 2 SPRING, Seat Support
4 7090999 2 SCREW, 1/4-20 x 5/8” Pan Head Self-Tap (Torx)
5 7090731 2 BOLT, 5/16-18 x 1/2” Short Neck Carriage, GR5 Was 90004
6 7075630 1 HINGE, Seat
7 7091601 2 NUT, 5/16-18 Hex Flange Lock, GR5 Was 91070
8 7033587 1 BUMPER, Rear
9 7091506 4 SCREW, 5/16-18 x 1-1/2” Hex Washer Self-Tap

10 7091587 1 WASHER, .531 x 1.062 x .121 SAE Flat

11 7090975 1 NUT, 1/2-13 Hex Center Lock, GR5 or B
12A 7041793 1 WELDMENT, Battery Bracket
12B 7058238 1 WELDMENT, Battery Bracket used on 48” Deck Model only

13 7013321 2 BUSHING, Tie Rod

14 7090238 4 SCREW, 5/16-24 x 1” Hex Head Cap, GR5

15 7011791 4 RETAINER, 5/16” Bolt

16 7091315 4 WASHER, .32 x .58 x .08 Split Lock

17 7091297 4 NUT, 5/16-24 Hex, GR5 or B

18 7011033 2 GROMMET

19 7029464 1 ASSEMBLY, Brake/Clutch Cable

20 7091730 1 BOLT, 1/2-13 Hex Shoulder

21 7058728 1 WELDMENT, Idler Arm, Primary

22 7058692 1 SPRING, Extension- 5” long

23 7090122 3 WASHER, 3/8” SAE Flat

24 7091585 2 NUT, 3/8-16 Hex Center Lock, GR5 or B

25 7024344 1 PULLEY, Idler, V 3.30 HA

26 7079832 1 BOLT, 3/8-16 x 4” Hex Head Cap, GR5

27 7034937 1 BRACKET, Hydro Idler

28 7045168 1 SPRING, Extension, Hydro Idler

29 7091553 1 SCREW, 3/8-16 x 1-3/4” Hex Head Cap, GR5

30 7039485 1 CABLE, Hydro Release Valve

31 7091240 2 SCREW, #10-32 x 5/8” Hex Washer Head Machine

32 7018574 1 IDLER, 4.12” Outside Diameter, Flat

33 7090376 2 NUT, #10-32 Hex Nyloc

34 7022886 1 SWITCH, Seat (NO/NC) Snap-In also shown on electronic

35 7075102 1 SLEEVE, Idler

36 7034938 1 GUIDE, Belt

tionItem Qt

Note

components page

Footnotes:

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

13

TP 400-5008-3-HZ-N

REAR FRAME ASSEMBLY

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

14

SERIES 5 & 6

REAR FRAME ASSEMBLY

p

y

Part No Descri

37 7058691 1 COVER-Spring

38 7091272 4 FASTENER, Ratchet

39 7043858 2 BUSHING, Flange, .64 x .75 x .5

tionItem Qt

Note

Footnotes:

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

15

TP 400-5008-3-HZ-N

JOYSTICK & OPERATOR SEAT (Part 1)

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

16

SERIES 5 & 6

JOYSTICK & OPERATOR SEAT (Part 1)

p

y

Part No Descri

1 7035483 1 BRACKET, R.H. Tank Support
2 7042637 1 WELDMENT, Bracket, Joystick
3 7035533 1 PIVOT, Joystick Control
4 7042636 1 WELDMENT, Handle, Joystick Control
5 7091800 4 BOLT, 5/16-18 Shoulder, w/Nylon Patch
6 7023656 1 LEVER, Shift Handle (grip)
7 7090844 1 ROLL PIN, 3/16 x 3/4”
8 7058531 1 ASSEMBLY, R.H. Fender

9 7075612 1 BRACKET, R.H. Console
10 7035936 1 BOOT, Joystick, Rubber
11 7046246 1 BRACKET, Joystick Boot
12 7046494 1 STOP, Joystick
13 7090999 9 SCREW, 1/4-20 x 5/8” Pan Head Self-Tap (Torx)
14 7075811 1 DECAL, Ignition Switch see decal page
15 7075760 1 DECAL, SNAPPER
16 7034817 1 DECAL, SCRAMBLER
17 7091593 1 PIN, 3/8 Self Locking Cotter
18 7090188 3 WASHER, .34 x .69 x .08 Flat
19 7044717 1 CYLINDER, Joystick Control
20 7044763 1 WELDMENT, U-Bracket
21 7091020 2 PUSHNUT, 1/4”
22 7044702 1 PIN, Joystick
23 7091511 1 NUT, 5/16-18 Hex, GR5 or B
24 7091315 1 WASHER, .32 x .58 x .08 Split Lock
25 7014664 1 BOLT, 5/16-18 x .530” Shoulder
26 7075617 1 ARM REST, HOZ
27 7091908 2 SCREW, 5/16-18 x 1-3/4” Hex Head Cap, GR5
28 7091298 2 NUT, 5/16-18 Hex Nyloc
29 7075610 1 FENDER, R.H. Lower
30 7091542 4 SCREW, 5/16-18 x 1/2” Pan Head Self-Tap (Torx)
31 7026343 1 SWITCH, Ignition (After-fire Solenoid) also shown on electronic

32 7091819 7 SCREW, 1/4-20 x 5/8” Hex Washer Self-Tap Was 90362
33 7058513 1 WELDMENT, Fender Support
34 7090361 4 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap

tionItem Qt

Note

components page

Footnotes:

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

17

TP 400-5008-3-HZ-N

JOYSTICK & OPERATOR SEAT (Part 2)

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

18

SERIES 5 & 6

JOYSTICK & OPERATOR SEAT (Part 2)

p

y

Part No Descri

1 7035481 1 BRACKET, L.H. Tank Support

2 7075629 1 BRACKET, Brake/Clutch Detent

3 7075609 1 FENDER, L.H. Lower

4 7023355 1 SWITCH, Park Brake (NC/NO) also shown on electronic

5 7090913 2 SCREW, #10-24 x 1/2" Hex Washer Self-Tap (Torx) (Torx)
6A 7075611 1 BRACKET, L.H. Console series 5
6B 7038601 1 BRACKET, L.H. Console YZ18426BVE

6C 7078034 1 BRACKET, L.H. Console YZ20486BVE

7 7075884 1 SWITCH, PTO E.C. (Delta Part No. 6201-219) also shown on electronic

8A 7072517 1 CONTROL, Throttle/Choke, Dual Lever series 5
8B 7028564 1 CONTROL, Throttle series 6 (not shown)

9 7058511 1 WELDMENT, Fuel Tank Support
10 7058530 1 ASSEMBLY, Fuel Tank/Left Hand Fender includes fuel cap (75748),

11 7075748 1 GAS CAP w/Screw Vent
12 7074835 1 FITTING, Dapco Dapco part number #11492
13 7090999 6 SCREW, 1/4-20 x 5/8” Pan Head Self-Tap (Torx)
14 7012337 1 GROMMET
15 7075760 1 DECAL, SNAPPER
16 7075708 1 DIP TUBE
17 7071683 1 DECAL, Hydro Release see decal page
18 7090188 2 WASHER, .34 x .69 x .08 Flat
19 7075812 1 DECAL, Park Brake see decal page
20 7075810 1 DECAL, Operating Instructions see decal page
21 7044897 1 SEAT, Milsco High Back
22 7046561 1 TETHER, Seat
23 7075628 1 HEAT SHIELD, Engine
24 7090858 4 SCREW, 5/16-18 x 1/2” Hex Washer Self-Tap
25 7023655 1 LEVER, Throttle Control series 6
26 7075617 1 ARM REST, HOZ
27 7091908 2 SCREW, 5/16-18 x 1-3/4” Hex Head Cap, GR 5
28 7091298 2 NUT, 5/16-18 Hex Nyloc
29 7071921 1 RIVET, Plastic Snap series 6
30 7091542 4 SCREW, 5/16-18 x 1/2” Pan Head Self-Tap (Torx)
32 7091819 3 SCREW, 1/4-20 x 5/8” Hex Washer Self-Tap Was 90362
34 7090361 2 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap

tionItem Qt

Note

components page

components page

grommet (12337), fitting (74835)
& tube (75708)

Footnotes:

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

19

TP 400-5008-3-HZ-N

FENDER & TRANSAXLE ASSEMBLY

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

20

SERIES 5 & 6

FENDER & TRANSAXLE ASSEMBLY

p

y

Part No Descri

1 7029128 1 TRANSAXLE, Hydro Eaton Model X778-005

2 7029129 1 TRANSAXLE, Hydro w/o Manifold R.H. Eaton Model X778-011

3 7015894 2 KEY, #605 Woodruff

4 7091122 8 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap Was 90539

5 7035337 2 FAN, 6” O.D., 10 Blade

6 7035336 2 PULLEY, Hydro Input

7 7091771 2 RING, RR3100-66 External Retaining

8 7041823 1 V-BELT, HA Sect. 42.00” effective length Hydro Drive

9 7034915 2 BRACKET, Support, Fender
10 7034916 1 BRACKET, Support, Hydro
11 7091819 4 SCREW, 1/4-20 x 5/8” Hex Washer Self-Tap Was 90362
12 7034909 1 FENDER, Rear Frame, Left Hand
13 7034908 1 FENDER, Rear Frame, Right Hand
14 7034917 1 BRACKET, Deck Support, Left Rear
15 7035424 1 BRACKET, Deck Support, Right Rear
17 7091541 26 SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap Was 90368
18 7090324 8 SCREW, 3/8-16 x 1” Hex Washer Self-tap
19 7034922 2 BRACKET, Control Cable, Hydro
20 7029147 4 ROD END, #10-32 w/Stud
21 7091801 4 NUT, #10-32 Hex Center Lock
22 7029170 1 CABLE, L.H. Hydraulic Control (45.5” long)
23 7029169 1 CABLE, R.H. Hydraulic Control (35.0” long)
24 7039484 1 BRACKET, Cable, Hydro Release Valve
25 7090361 2 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
26 7039483 2 BRACKET, Actuator, Hydro Release Valve
27 7012114 2 BUSHING, Differential Link, Powdered Metal
28 7091841 2 SCREW, 5/16-18 x 1” Hex Washer Self-Tap, GR 5
29 7034913 2 ARM, Directional Control
30 7091165 4 BOLT, 1/4-28 x 5/8” w/Nyloc Patch, GR 8
31 7090746 4 WASHER, 1/4” Belleville
32 7034914 2 ARM, Brake
33 7090122 6 WASHER, 3/8" Flat Was 91514
34 7029284 1 ROD, Brake, R.H.
35 7029142 1 ROD, Brake, L.H.
36 7091594 2 COTTER-PIN, 1/16" x 1.42" Self-Locking Was 24874
37 7024586 2 SWIVEL, Brake Link- PM

tionItem Qt

Note

Footnotes:

NOTE: Use Mobil 1 DTE 26 oil for hydro transaxle.

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

21

TP 400-5008-3-HZ-N

FENDER & TRANSAXLE ASSEMBLY

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

22

SERIES 5 & 6

FENDER & TRANSAXLE ASSEMBLY

p

y

Part No Descri

38 7074511 2 SPRING, Brake Compression
39 7091299 2 NUT, 3/8-16 Hex Nyloc
40 7039485 1 CABLE, Hydro Release Valve
41 7044767 1 DECAL, Hydro Reservoir see decal page
42 7090011 2 WASHER, #10, Internal Tooth Lock
43 7090013 3 NUT, #10-32, Hex

tionItem Qt

Note

Footnotes:

NOTE: Use Mobil 1 DTE 26 oil for hydro transaxle.

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

23

TP 400-5008-3-HZ-N

BRAKE/CLUTCH LEVER ASSEMBLY

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

24

SERIES 5 & 6

BRAKE/CLUTCH LEVER ASSEMBLY

p

y

Part No Descri

1 7023801 1 GRIP, 5/16 x 2-1/2” Vinyl Was 29383

2 7035945 1 GRIP, Brake/Clutch Handle

3 7075527 1 ROD, Park Brake 36” arc radius (replaces 35479

4 7035946 1 SPRING, Clutch/Brake Release

5 7035485 1 ARM, Brake/Clutch Lever

6 7035484 1 PIVOT, Brake/Clutch Lever

7 7091084 1 SCREW, 1/4-20 x 3/8” Hex Washer Self-Tap Was 91293

8 7075528 1 TUBE, Clutch/Brake Lever 35.99” arc radius (replaces

9 7010694 1 BUSHING, Nylon
10 7029207 1 ROD, Clutch/Brake
11 7052431 2 ASSEMBLY, Foot Shaft Pivot weldment with grease fitting,

12 7090841 3 PIN, 3/16 x 1-1/2” Roll
13 7029208 1 ARM, Brake/Clutch
14 7042614 1 WELDMENT, Brake/Clutch Arm

tionItem Qt

Note

& 58542)

58541)

13864

Footnotes:

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

25

TP 400-5008-3-HZ-N

ENGINE COMPONENTS

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

26

SERIES 5 & 6

ENGINE COMPONENTS

p

y

Part No Descri

1 -- 1 ENGINE, 18 HP Briggs Intek Mod 31H777, Type 0115, Trim

-- -- 1 ENGINE, 18 HP Briggs Intek Mod 31H777, Type 0117, Trim

2 7010210 1 KEY, 1/4” Square x 2”

3A 7015352 2 GASKET, Exhaust (18 HP) 1.25” I.D. Hole; mat'l graphite
3B 7014509 1 GASKET, Exhaust (20 HP) 1.18” I.D. Hole; mat'l graphite
3C 7063283 1 GASKET, 20 HP Intec 1.00” I.D. Hole

4 7027972 1 ASSEMBLY, Oil Valve

5 7035362 1 GUIDE, Engine Belt

6 7036389 1 PLATE, Engine

7 7041822 1 PULLEY, Engine series 5 (bottom pulley 4.25

-- 7040706 1 PULLEY, Engine series 6 (bottom pulley 4.75

8 7090324 4 SCREW, 3/8-16 x 1” Hex Washer Self-tap engine mounting bolts

9 7091301 1 WASHER, 7/16 Split Lock
10 7091763 1 SCREW, 7/16-20 x 1-1/2” Hex Head Cap, GR 5
11 7091807 1 WASHER, .468 x 1.38 x .25 Flat (special)
12 7029900 4 HOSE CLAMP, .490 x .31 or 12222
13 7024161 2 BOLT, 5/16-18 x 4” Shoulder
14 7024566 1 SCREW LOCK
15 7041537 1 DEFLECTOR, Muffler
16 7071756 1 ADAPTER, Muffler Briggs part no. 695766
17 7074826 1 MUFFLER, 14.5HP B&S Engine Nelson part no. 25482D
18 7091581 3 SCREW, #8-18 x 1/2” Hex Head Sheet Metal
19 7044824 1 HEAT SHIELD, Muffler- 17HP B&S Intek series 5

-- 7041340 1 HEAT SHIELD, Muffler- B&S series 6
20 7029982 1 HOSE, Fuel, 1/4 I.D. x 14” long
21 7016325 1 VALVE, Fuel
22 7012638 1 HOSE, Fuel, 12-1/2” long Was 12912

23A 7072517 1 CONTROL, Throttle/Choke, Dual Lever series 5
23B 7028564 1 CONTROL, Throttle series 6

24 7091122 3 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap Was 90539
25 7090606 1 BOLT, 5/16-18 x 5/8” Hex Flange Lock, GR 5 Was 91510
26 7015861 1 HARNESS CLIP (vinyl covered)
27 7071760 1 HEAT SHIELD
28 7076272 2 HOSE, Fuel, 1/4 I.D. x 8-1/2” long used on 20 HP Engine
29 7071756 1 HEAT SHIELD, Muffler, V-Twin used on 48” deck only
30 7024241 1 MUFFLER, B&S 16HP used on 20 HP engine; Briggs

31 7026778 1 DEFLECTOR, Direct Out used with muffler 24241

tionItem Qt

Note

E1 (series 5)

E1 (series 6)

O.D.)

O.D.)

p/n 394151

Footnotes:

NOTE: Purchase engine parts from engine manufacturer dealer.

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

27

TP 400-5008-3-HZ-N

ENGINE COMPONENTS

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

28

SERIES 5 & 6

ENGINE COMPONENTS

p

y

Part No Descri

32 7092025 4 WASHER, M8 Split Lock
33 7040000 1 MANIFOLD, 20 HP Intec
34 7091579 1 SCREW, 1/4-20 x 1/2” Hex Flange Lock, GR 5
35 7091738 2 SCREW, 5/16-18 x 3/4” Socket Head Cap, GR 8
36 7091584 3 NUT, 1/4-20 Hex Flange Lock, GR 5
37 7023655 1 LEVER, Throttle Control series 6
38 7071921 1 RIVET, Plastic Snap series 6
39 7091240 2 SCREW, #10-32 x 5/8” Hex Washer Head Machine series 6
40 7090376 2 NUT, #10-32 Hex Nyloc series 6
41 7063252 1 CONTROL, Choke
42 7090390 1 WASHER, 3/8” Internal Tooth Lock
43 7091630 1 NUT, 3/8-24 Hex Was 90155

tionItem Qt

Note

Footnotes:

NOTE: Purchase engine parts from engine manufacturer dealer.

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

29

TP 400-5008-3-HZ-N

CLUTCH ASSEMBLY

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

30

SERIES 5 & 6

CLUTCH ASSEMBLY

p

y

Part No Descri

1 7091735 1 BOLT, 7/16-20 x 8” Hex Head, GR 5
2 7029138 2 WASHER, .468 I.D. x 1.50 O.D. x .188 Flat
3 7029136 2 BEARING, 6305 w/Snap Ring
4 7091601 6 NUT, 5/16-18 Hex Flange Lock, GR 5 Was 91070
5 7029117 1 V-BELT, 5L Sect. Cog, 50.170” effective length Primary Drive 42” Deck (Dayco

-- 7046997 1 V-BELT, 5L Sect. Cog, 49.44” eff. Length- 48” Deck Primary Drive 48” Deck

6 7029107 1 PULLEY, Jackshaft used on 42” Deck Models

-- 7046892 1 PULLEY, Jackshaft used on 48” Deck Models

7 7091829 2 SCREW, 1/4-20 x 1/2” Set w/Patch
8 7063269 1 SUPPORT, Jackshaft- TG 2000

9 7091508 6 BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR 5
10 7029135 1 JACKSHAFT
11 7013250 2 KEY, 1/4” Square x 1” qty. 1 on 38” units
12 7063248 1 BRACKET, Anti-Rotation- TG-2000 used on 33” units
13 7063246 1 CLUTCH, Warner TG-2000 (12V)
14 7091301 1 WASHER, 7/16” Split Lock
15 7090460 1 NUT, 7/16-20 Hex, GR 5 or B
16 7012652 1 WIRE CLIP 7/16”, Vinyl Covered
17 7063247 1 SPACER, Jackshaft, Warner Clutch

tionItem Qt

Note

#46-0364)

Footnotes:

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

31

TP 400-5008-3-HZ-N

42" DECK LIFT HANDLE ASSEMBLY

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

32

SERIES 5 & 6

42" DECK LIFT HANDLE ASSEMBLY

p

y

Part No Descri

1 7041924 1 HANDLE, Deck Lift

2 7041925 1 BRACKET, Pivot Support

3 7058090 1 WELDMENT, Deck Lift Handle

4 7029040 1 WASHER - Slipper

5 7046489 1 SPRING, Torsion

6 7090072 2 SCREW, 1/4-20 x 5/8” Hex Head Cap, GR5

7 7091584 3 NUT, 1/4-20 Hex Flange Lock Was 90583

8 7035489 1 BAR, Deck Lift

9 7090122 3 WASHER, 3/8” SAE Flat
10 7091503 2 HAIR PIN, 3/32 x 1-1/2”
11 7013996 1 PIN, 3/8 x 2” Clevis
12 7058077 1 DETENT, Lift Handle
13 7091318 1 SCREW, 5/16-18 x 3/4” Hex Head Cap, GR5
14 7091601 1 NUT, 5/16-18 Hex Flange Lock, GR5 Was 91070
15 7046457 1 DECAL, Deck Position
16 7091887 1 PIN.38 x .5 Large Head Clevis
17 7046491 1 PIN, 3/8 x 1-5/8” Clevis
18 7046490 1 SPACER, Deck Lift
19 7091597 1 PIN, 3/32 x 3/4” Cotter
20 7091530 1 BOLT, 1/4-20 x 3/4 Short Neck Carriage, GR5
21 7074768 2 GRIP, Deck Lift

tionItem Qt

Note

Footnotes:

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

33

TP 400-5008-3-HZ-N

48" DECK LIFT HANDLE ASSEMBLY

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

34

SERIES 5 & 6

48" DECK LIFT HANDLE ASSEMBLY

p

y

Part No Descri

1 7041924 1 HANDLE, Deck Lift

2 7041925 1 BRACKET, Pivot Support

3 7058090 1 WELDMENT, Deck Lift Handle

4 7029040 1 WASHER - Slipper

5 7046489 1 SPRING, Torsion

6 7090072 2 SCREW, 1/4-20 x 5/8” Hex Head Cap, GR5

7 7091584 2 NUT, 1/4-20 Hex Flange Lock Was 90583

8 7047066 1 LINK, Connector

9 7090122 5 WASHER, 3/8” SAE Flat
10 7091503 2 HAIR PIN, 3/32 x 1-1/2”
11 7090667 2 WASHER, 1/2” SAE Flat
12 7058077 1 DETENT, Lift Handle
13 7091318 1 SCREW, 5/16-18 x 3/4” Hex Head Cap, GR5
14 7091601 1 NUT, 5/16-18 Hex Flange Lock, GR5 Was 91070
15 7046457 1 DECAL, Deck Position
16 7091887 1 PIN, .38 x .5 Large Head Clevis
17 7046491 1 PIN, 3/8 x 1-5/8” Clevis
18 7046490 1 SPACER, Deck Lift
19 7091597 2 PIN, 3/32 x 3/4” Cotter
20 7047067 1 PLATE, Connector Arm
21 7091948 2 PIN, 1/2 x .725 Clevis
22 7091598 2 PIN, 1/8 x 1” Cotter Was 90041
23 7013996 1 PIN, 3/8 x 2” Clevis
24 7074768 2 GRIP, Deck Lift
25 7091530 1 BOLT, 1/4-20 x 3/4 Short Neck Carriage, GR5

tionItem Qt

Note

Footnotes:

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

35

TP 400-5008-3-HZ-N

42" MOWER DECK ASSEMBLY (Part 1)

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

36

SERIES 5 & 6

42" MOWER DECK ASSEMBLY (Part 1)

p

y

Part No Descri

1 7061958 1 * DECK, 42” Replacement

2 7051914 2 ASSEMBLY, Spindle Brake Was 59723

3 7091588 14 BOLT, 3/8-16 x 3/4” Hex Flange Lock, GR5 Was 90612

4 7091619 18 NUT, 3/8-16 Hex Flange Lock Was 90613

5 7014407 2 WASHER, Spindle

6 7026691 2 BLADE, 21 Inch Standard Lift

7 7012063 5 WASHER, Cone

8 7090824 2 SCREW, 3/8-24 x 1-1/4” Hex Head Cap, GR5

9 7033366 2 BRACE, Spindle
10 7027198 2 BOLT, 3/8-16 x 1” Hex Flange Lock
11 7051747 2 ASSEMBLY, Spindle Lock (press fit)
12 7044651 1 WELDMENT, Stationary Idler
13 7042811 1 REINFORCEMENT, Right Hand
14 7042812 1 REINFORCEMENT, Left Hand
15 7091547 4 BOLT, 3/8-16 x 3/4” Short Neck Carriage Was 90850
16 7035982 1 BRACKET, Right Front Deck Lift
17 7035983 1 BRACKET, Left Front Deck Lift
18 7035985 1 BRACKET, Left Rear DeckLift
19 7036437 2 PULLEY, 5-1/4”
20 7074467 2 NUT, 3/4-16 Hex Jam, GR 8
21 7090872 1 BOLT, 1/4-20 x 1-1/8” Hex Flange Lock, GR5
22 7010916 1 SPACER, .26 x .375
23 7090372 1 NUT, 1/4 - 20 Hex Center Lock (replaces 91099)
24 7091526 1 BOLT, 3/8-24 x .62 Shoulder
25 7091587 1 WASHER, .531 x 1.062 x .121 SAE Flat
26 7042650 1 WELDMENT, Idler Arm
27 7090122 2 WASHER, 3/8” SAE Flat
28 7090289 1 NUT, 3/8-24 Hex Center Lock
29 7014241 1 WASHER, .27 x 1.0 x .065 Flat

tionItem Qt

Note

Footnotes:

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

37

TP 400-5008-3-HZ-N

42" MOWER DECK ASSEMBLY (Part 2)

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

38

SERIES 5 & 6

42" MOWER DECK ASSEMBLY (Part 2)

p

y

Part No Descri

27 7090122 2 WASHER, 3/8” SAE Flat
28 7090289 1 NUT, 3/8-24 Hex Center Lock shown on previous page only
29 7014241 1 WASHER, .27 x 1.0 x .065 Flat shown on previous page only
30 7042586 1 WELDMENT, Lift Arm, Front
31 7034815 1 LIFT ARM, Front
32 7010935 4 WASHER, 3/4” Flat
33 7015447 1 ECCENTRIC, Leveling
34 7090390 1 WASHER, 3/8” Internal Tooth Lock
35 7090163 1 SCREW, 3/8-24 x 1-1/4” Hex Head Cap w/Nylon Patch, GR5
36 7035495 1 ROD, Cutter Deck Timing (3/8-16 thread)
37 7042585 1 WELDMENT, Lift Arm, Rear
38 7032028 2 WASHER, .781 x 1.5 x .132 Flat
39 7024586 1 SWIVEL, Brake Link- PM
40 7091310 1 HAIR PIN, #13 replaces 16231
41 7021815 1 SPACER, .391 I.D. x .531 long
42 7091585 1 NUT, 3/8-16 Hex Center Lock Was 90546

tionItem Qt

Note

Footnotes:

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

39

TP 400-5008-3-HZ-N

42" MOWER DECK ASSEMBLY (Part 3)

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

40

SERIES 5 & 6

42" MOWER DECK ASSEMBLY (Part 3)

p

y

Part No Descri

43 7035835 4 POST, Anti-Scalp
44 7091328 8 SCREW, 3/8-16 x 1-1/4 Hex Head Cap, GR5
45 7091619 8 NUT, 3/8-16 Hex Flange Lock Was 90613
46 7029265 4 BOLT, 3/8-16 x 2-5/8” Shoulder for gage wheel
47 7091585 6 NUT, 3/8-16 Hex Center Lock, GR5 or B
48 7029264 4 WHEEL, Gage
49 7022717 1 ROD, Deck Support
50 7017847 1 RING, .438 External Retaining
51 7075235 1 BELT, HA Section, (94.5” nom. effective length)
52 7028728 2 ADJUSTER, Chain (5/16-18 thread)
53 7028200 2 SWIVEL, Adjustment
54 7090122 5 WASHER, 3/8” SAE Flat replaces 91514, 91296
55 7091503 3 HAIR PIN, 3/32 x 1-1/2”
56 7024910 1 DECAL, 42 Inch see decal page
57 7035969 1 SPRING, Extension 1.03 Dia. X 6.8” long
58 7036561 1 BELT GUIDE, 38/42 Idler
59 7012063 2 WASHER, Cone
60 7075707 1 IDLER, Flat (4.00 O.D.)
61 7091553 2 SCREW, 3/8-16 x 1-3/4” Hex Head Cap, GR5
62 7018574 1 IDLER, 4.12” Outside Diameter, Flat
63 7090799 2 BOLT, 5/16-18 x 5/8” Short Neck Carriage, GR5
64 7011791 2 RETAINER, 5/16” Bolt
65 7091315 2 WASHER, .32 x .58 x .08 Split Lock
66 7091537 2 WING LOCKNUT, 5/16-18
67 7091303 2 BOLT, 5/16-18 x 1” Short Neck Carriage, GR5
68 7051401 1 ASSEMBLY, Chute & Decal includes items 69 & 70
69 7051401 1 WELDMENT, Side Chute Was 40497
70 7013010 1 DECAL, Danger, Cut Finger (CPSC)
71 7091601 2 NUT, 5/16-18 Hex Flange Lock, GR5
72 7023606 2 CAP, Vinyl
73 7046720 1 DECAL, Chute/Deflector

tionItem Qt

Note

Footnotes:

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

41

TP 400-5008-3-HZ-N

48" MOWER DECK ASSEMBLY (Part 1)

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

42

SERIES 5 & 6

48" MOWER DECK ASSEMBLY (Part 1)

p

y

Part No Descri

1 7013847 3 RETAINER, 3/8” Bolt

2 7034321 1 STIFFENER, 48” Deck, HOZ

3 7044848 1 WELDMENT, 48” Deck

4 7047047 1 HANGER Rear R.H.

5 7047048 1 HANGER Rear L.H.

6 7047049 1 BRACKET, Pulley Mounting

7 7074230 1 BRACKET, Front Lift L.H.

8 7074231 1 BRACKET, Front Lift R.H.

9 7059240 1 WELDMENT, Front Lift, 48 Ref: Item 22 on 48” FRONT

10 7091619 6 NUT, 3/8-16 Hex Flange Lock
11 7058076 1 ASSEMBLY, Idler Arm/Lube Fitting incl. 46706, Idler Arm Weldment

12 7013864 1 LUBE FITTING, Straight (press-fit for .187 dia. Hole)
13 7074951 1 BRACKET, Hinge, 48” Deck
14 7071698 1 SPACER, Pivot Collar, 48 HOZ
15 7091888 1 BOLT, 3/8-16 x 4” Square Neck Carriage, GR 5
16 7090799 12 BOLT, 5/16-18 x 5/8” Short Neck Carriage, GR 5
17 7091923 4 BOLT, 3/8-16 x 3/4” Short Neck Carriage, GR 5
18 7091601 19 NUT, 5/16-18 Hex Flange Lock, GR 5
19 7090122 2 WASHER, 3/8” SAE Flat replaces 91514, 91296
20 7091593 2 PIN, 3/8 Self Locking Cotter
21 7044801 4 WELDMENT, Caster Bracket
22 7091169 4 BOLT, 5/16-18X1-1/8” Short Neck Carriage, GR 5
23 7091923 2 BOLT, 3/8-16 x 3/4” Short Neck Carriage, GR 5
24 7075587 1 BRACKET, Stationary Idler
25 7027168 3 SCREW, 5/16-18 x 1” Hex Head Cap, GR 5 Was 90636

tionItem Qt

Note

FRAME & COVER ASSEMBLY
page

& one item 12

Footnotes:

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

43

TP 400-5008-3-HZ-N

48" MOWER DECK ASSEMBLY (Part 2)

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

44

SERIES 5 & 6

48" MOWER DECK ASSEMBLY (Part 2)

p

y

Part No Descri

26 7013010 1 DECAL, Danger, Cut Finger (CPSC) see decal page
27 7035813 1 SPRING, Torsion
28 7058508 1 SPRING, Extension, 48” HOZ
29 7029425 1 DISCHARGE CHUTE, Hi Impact Co-Polymer
30 7075092 1 V-BELT, HA Sect. (120.722” effective length)
31 7043858 8 BUSHING, Flange, .64 x .75 x .5
32 7046301 4 SLEEVE, Caster Wheel
33 7046302 4 WELDMENT, Pivot Yoke, Caster
34 7046720 1 DECAL, Chute/Deflector see decal page
35 7047093 1 BELT COVER, LH
36 7047094 1 BELT COVER, RH
37 7090667 2 WASHER, 1/2” Flat
38 7058524 3 ASSEMBLY, 48” Spindle ref: 48” Spindle Assembly page
39 7072319 1 PULLEY, 3-1/4” Dia. Flat Idler New Hampshire p/n FH-5220-14
40 -- 1 *ASSEMBLY, 48” Painted Mower Deck see previous two pages
41 7058086 2 LINK, Leveling (3/8-16 thread)
42 7058087 2 SWIVEL, Support (3/8-16 internal thread)
43 7072044 1 HINGE PIN
44 7091810 2 BOLT, 3/8-16 x 1-3/4” Short Neck Carriage, GR 5 Was 91158
45 7076436 8 SPACER, Blade
46 7073142 4 ROLLER, Low Density Polyethylene Was 79226
47 7091503 6 HAIR PIN, 3/32 x 1-1/2”
48 7091084 4 SCREW, 1/4-20 x 3/8” Hex Washer Self Tap Was 90302
49 7091585 3 NUT, 3/8-16 Hex Center Lock Was 90546
50 7090993 4 SCREW, 1/2-20 x 4-1/2” Hex Head Cap, GR 5
51 7090122 5 WASHER, 3/8” SAE Flat replaces 91514, 91296
52 7090266 4 NUT, 1/2-20 Hex Center Lock, GR 5 or B
53 7091628 4 WASHER, .64 x .99 x .05 Flat
54 7014341 2 RING, .392 External Retaining Waldes #5133-50
55 7018574 1 IDLER, 4.12” Outside Diameter, Flat
56 7024431 1 DECAL, 48” Deck see decal page
57 7034422 1 PULLEY, 5” x .375 Flat Idler (Belt Clutch) Myers part no. AM888
58 7044813 3 PULLEY, Driven, 4.50” O.D.
59 7074467 3 NUT, 3/4-16 Hex Jam, GR 8
60 7014407 3 WASHER, Spindle also shown on 48” SPINDLE

tionItem Qt

Note

ASSEMBLY page

Footnotes:

*NOTE: Deck Ass'y 58522 consists of items 2-9, 11, 13, 14, 21, 24, 38, 58 & 60 assembled with appropriate fasteners.

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

45

TP 400-5008-3-HZ-N

42" SPINDLE ASSEMBLY

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

46

SERIES 5 & 6

42" SPINDLE ASSEMBLY

p

y

Part No Descri

1 7051914 2 ASSEMBLY, 42” Spindle Was 59723 (Includes 2 thru 7)

2 7012491 2 RING, 1-3/4” External Retaining Ring Truarc part no. N-5000-175

3 7013313 2 BALL BEARING, 3/4” I.D.

4 7051918 1 WELDMENT, Spindle Housing Was 47917

5 7032294 1 HOLDER, Blade

6 7014407 1 WASHER, Spindle

7 7027668 1 SHAFT, Blade Spindle (3.47 shank length)

8 7010817 1 FITTING, Lube, Press-In (for .187 dia. Hole)

tionItem Qt

Note

Footnotes:

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

47

TP 400-5008-3-HZ-N

48" SPINDLE ASSEMBLY

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

48

SERIES 5 & 6

48" SPINDLE ASSEMBLY

p

y

Part No Descri

1 7058524 3 ASSEMBLY, 48” Spindle includes items 2 thru 10

2 7012491 2 RING, 1-3/4” External Retaining Truarc part no. N-5000-175

3 7013313 2 BALL BEARING, 3/4” I.D.

4 7010817 1 LUBE FITTING, Press-In (for .187 dia. Hole)

5 7073405 1 SHAFT, Spindle (7.81” long)

6 7044798 1 WELDMENT, 48” Spindle Housing

7 7014407 2 WASHER, Spindle

8 7016440 2 WASHER, .656 Belleville

9 7090658 1 NUT, 5/8-18 Hex Jam
10 7075588 1 BLADE, 16-1/2” Low Inertia
11 7027168 6 SCREW, 5/16-18 x 1” Hex Head Cap, GR 5 Was 90636 (not part of 58524

12 7091601 6 NUT, 5/16-18 Hex Flange Lock, GR 5 Was 91070 (not part of 58524

tionItem Qt

Note

assembly)

assembly)

Footnotes:

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

49

TP 400-5008-3-HZ-N

DECALS (Part 1)

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

50

SERIES 5 & 6

DECALS (Part 1)

p

y

Part No Descri

1 7075760 2 DECAL, SNAPPER

2 7034817 1 DECAL, SCRAMBLER

3 7075812 1 DECAL, Park Brake

4 7046426 1 DECAL, Deck Height

5 7075811 1 DECAL, Ignition Switch

6 7075713 1 DECAL, Engine, 18 HP OHV B&S Simplicity part no. 275124

7 7044767 1 DECAL, Hydro Reservoir

8 7046457 1 DECAL, Deck Position

9 7024910 1 DECAL, 42” Deck
10 7024431 1 DECAL, 48” Deck

tionItem Qt

Note

Footnotes:

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

51

TP 400-5008-3-HZ-N

DECALS (Part 2)

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

52

SERIES 5 & 6

DECALS (Part 2)

p

y

Part No Descri

11 7075993 1 DECAL, Warning, Read Manuals & Instructions
12 7075810 1 DECAL, Operating Instructions
13 7071683 1 DECAL, Hydro Release
14 7046720 1 DECAL, Chute/Deflector
15 7013010 1 DECAL, Danger, Cut Finger (CPSC)
16 7073335 1 DECAL OPEI Ride-On
17 7075635 1 DECAL, Service Parts, HOZ Domestic
18 7029113 1 DECAL, Caution, Fuel (English)
19 7078049 1 DECAL, Throttle/Choke Control

tionItem Qt

Note

Footnotes:

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

53

TP 400-5008-3-HZ-N

ELECTRICAL COMPONENTS (Part 1)

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

54

SERIES 5 & 6

ELECTRICAL COMPONENTS (Part 1)

p

y

Part No Descri

1A 7075497 1 WIRING HARNESS, 18 HP Briggs
1B 7047041 1 WIRING HARNESS, 14.5 HP Briggs used on 20 hp engine

tionItem Qt

Note

Footnotes:

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

55

TP 400-5008-3-HZ-N

ELECTRICAL COMPONENTS (Part 2)

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

56

SERIES 5 & 6

ELECTRICAL COMPONENTS (Part 2)

p

y

Part No Descri

1 7028570 1 RELAY, OPC, Electric Clutch

2 7090411 2 SCREW, #10-24 x 1/2” Hex Head Cap

3 7012688 2 NUT, #10-24 Hex Twin “Whiz” Lock

4 7035926 1 WIRE HARNESS, Warner Clutch

5 7016835 1 WIRE, Positive, 13” long

6 7042956 1 WIRE, Negative, 14” long

7 7071694 2 COVER, Battery Cable

8 7090977 2 NUT, 1/4-20 Hex Jam, GR 5 or B

9 7022886 1 SWITCH, Seat (NO/NC) Snap-In
10 7075884 1 SWITCH, PTO E.C. Delta part no. 6201-219
11 7023355 1 SWITCH, Park Brake (NC/NO)
12 7090913 3 SCREW, #10-24 x 1/2" Hex Washer Self-Tap (Torx) (Torx)
13 7029130 1 BATTERY, 12V, 3 Amp, 190 Cold Cranking Amp includes drain tube
14 7026343 1 SWITCH, Ignition (After-fire Solenoid)
15 7035661 1 SPACER, PTO Switch not shown
16 7023506 1 BEZEL
17 7075622 1 SOLENOID - Super Trombetta- 2 Terminal
18 7090071 2 SCREW, 1/4-20 x 1/2” Hex Head Cap, GR 5
19 7091584 3 NUT, 1/4-20 Hex Flange Lock
20 7090053 3 WASHER, 1/4” Internal Tooth Lock Was 91314

tionItem Qt

Note

Footnotes:

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

57

TP 400-5008-3-HZ-N

WIRING SCHEMATIC (18 hp engine)

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

58

SERIES 5 & 6

WIRING SCHEMATIC (18 hp engine)

p

y

Part No Descri

* 1 * Wiring Schematic includes harness # 75497

tionItem Qt

Note

Footnotes:

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

59

TP 400-5008-3-HZ-N

WIRING SCHEMATIC (20 hp engine)

Manual No. 7006176 SCRAMBLER 42" & 48" HYDRO DRIVE YZ
TP 400-5008-3-HZ-N

60

SERIES 5 & 6

WIRING SCHEMATIC (20 hp engine)

p

y

Part No Descri

* 1 * Wiring Schematic includes harness # 47041

tionItem Qt

Note

Footnotes:

Manual No. 7006176SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

61

TP 400-5008-3-HZ-N

Parts Manual fo

r

SCRAMBLER 42" & 48" HYDRO DRIVE YZ

SERIES 5 & 6

RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS

COPYRIGHT © 2005

SNAPPER PRODUCTS, INC.

ALL RIGHTS RESERVED.

IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS

WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE

AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE

SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.

McDonough, GA, 30253 U.S.A.

Revision 3,

7/26/2005

Manual No. 7006176

TP 400-5008-3-HZ-N