Page 1
Parts Manual for
YARD CRUISER
HYDRO DRIVE
YZ SERIES 3 & 4
MODELS
YZ145333BVE
YZ145383BVE
YZ15334BVE
YZ15384BVE
EYZ15334BVE
TM
CONTENTS
DESCRIPTION PAGE(S) DESCRIPTION PAGE(S)
WHEELS- REAR ..............................................................2
CASTER, FRONT WHEEL & TIRE ASSM’Y....................3
FRONT FRAME & COVER ASSEMBLY ..........................4-5
REAR FRAME ASSEMBLY..............................................6-7
JOYSTICK & OPERATOR’S SEAT..................................8-11
FENDER & TRANSAXLE ASSEMBLY.............................12-15
CLUTCH ASSEMBLY.......................................................16-17
DECK LIFT HANDLE ASSEMBLY...................................18-19
BRAKE/CLUTCH LEVER ASSEMBLY ............................20-21
COPYRIGHT © 2003
SNAPPER PRODUCTS INC.
ALL RIGHTS RESERVED
(Rev. 3, 06/05/03) MANUAL No. 06147
33” MOWER DECK ASSEMBLY.....................................22-25
38” MOWER DECK ASSEMBLY.....................................26-29
33” SPINDLE ASSEMBLY...............................................30
38” SPINDLE ASSEMBLY...............................................31
ENGINE COMPONENTS..................................................32-33
DECALS ...........................................................................34-37
ELECTRICAL COMPONENTS.........................................38-39
ELECTRICAL SCHEMATIC.............................................40
Page 2
WHEELS - REAR
,
ITEM PART NO. DESCRIPTION
1 5-7681 ASSEMBLY, Rear Tire & Rim (2) (Includes Items 2A, 3A, & 7) (33" Models)
-- 5-7682 ASSEMBLY, Rear Tire & Rim (2) (Includes Items 2B, 3B, & 7) (38” Models)
2A 4-6321 TIRE, 18 x 7.00-8, Multi-Trac (33” Models)
2B 4-6322 TIRE, 18 x 8.50-8, Multi-Trac (38” Models)
3A 3-5427 RIM, 18 x 6.50 (33” Models)
3B 3-5562 RIM, 18 x 8.50 (38” Models)
4 1-6561 BUSHING, Machine (2)
5 9-1764 RING, Retaining, External 1” (2)
6 1-1022 CAP, Hub (2)
7 1-2234 STEM, Valve
8 4-2940 KEY, Square M6 x 38mm (2)
MANUAL No. 06147
8
7
2A
2B
3A, 3B
4
5
6
2
Page 3
CASTER, FRONT WHEEL & TIRE ASSEMBLY
8
2
6
7
11
ITEM PART NO. DESCRIPTION
7
10
3
4
12
13
5
13
14
1 5-3980 ASSEMBLY, Front Wheel & Tire (Complete) (2)
(Includes Items 2, thru 5)
2 3-5618 TIRE, 11 x 4.00-5, Smooth Tread
3 2-9122 RIM, Caster Wheel
4 1-4247 FITTING, Lube
5 1-2234 VALVE, Air (Snap-in)
6 1-2709 RING, 1” External Retaining (2)
7 2-3556 BUSHING, Caster (2)
8 1-3864 FITTING, Lube, 3/8” (2)
9 2-9141 BEARING, Flanged 1 x 2 x 5/8” (2)
10 4-1783 CASTER, Pivot Yoke (2)
11 9-0839 NUT, 7/16-14 Hex Center Lock (2)
12 3-5359 TUBE, 5/8 O.D. x 14 Ga. x 4.51 (2)
13 3-5358 BEARING, Ball 5/8 x 1-3/8” (4)
14 9-1772 SCREW, 7/16-14 x 6” Hex Head Cap, Grade 5 (2)
MANUAL No. 06147
3
Page 4
FRONT FRAME & COVER ASSEMBLY
MANUAL No. 06147
13
12
13
12
11
8
7
6
15
5
15
4
3
14
10
9
15
1
2
4
Page 5
FRONT FRAME & COVER ASSEMBLY
ITEM PART NO. DESCRIPTION
1 5-9380 FRAME, Front
2 4-2921 BUMPER, Front
3 9-1058 BOLT, 5/16-18 x 3-3/4” (2)
4 9-1315 WASHER, 5/16” Split Lock (2)
5 9-1070 NUT, 5/16-18 Hex Flange Lock, Grade 5 (2)
6 2-8260 FASTENER, “U” Type 1/4”-20 (2)
7 9-0324 SCREW, 3/8-16 x 1” Hex Self-Tapping (2)
8 9-0517 WASHER, 3/8” Flat (2)
9 3-5375 SPACER, Front Frame Pivot (2)
10 3-5374 PLATE, Front Frame Pivot
11 4-6895 FLOOR, Front Frame
12 9-1890 WASHER, 1/4” Internal/External Lock (4)
13 2-3341 KNOB (4)
14 7-2141 FLOOR MAT (Series 2)
15 4-1818 PAD, Floor Pan (3)
MANUAL No. 06147
5
Page 6
REAR FRAME ASSEMBLY
MANUAL No. 06147
5
6
7
4
38
2
18
34
37
22
3
13
8
12
13
11
10
1
21
20
33
25
23
24
26
19
6
9
17
14
16
15
9
30
31
29
28
32
27
36
35
Series 3 only
Page 7
23
ITEM PART NO. DESCRIPTION
1 4-1782 FRAME, Rear
2 3-5368 CUSHION, Seat Support (2)
3 3-5369 SPRING, Seat Support (2)
4 9-0999 SCREW, 1/4-20 x 5/8” Pan
5 9-0004 BOLT, 5/16-18 x 1/2” Carriage,
Grade 5 (3)
6 3-4959 HINGE, Seat
7 9-1070 NUT, 5/16-18 Hex Flange Lock,
Grade 5 (2)
8 3-3587 BUMPER, Rear
9 9-1506 SCREW, 5/16-18 x 1-1/2” Self Taping (4)
10 9-1587 WASHER, 1/2” Flat (2)
11 9-1316 NUT, 1/2-13 Hex, Grade B (2)
12 4-1793 BRACKET, Battery
13 1-3321 BUSHING (2)
14 9-0238 SCREW, 5/16-24 x 1” Hex (4)
15 1-1791 RETAINER, 5/16 Bolt (4)
16 9-1315 WASHER, 5/16 Split Lock (4)
17 9-1297 NUT, 5/16-24 Hex, Grade 5 (4)
18 1-1033 GROMMET (2)
19 2-9464 CABLE, Brake/Clutch
20 9-1730 BOLT, 1/2-13 x 5/8” Shoulder
21 5-8728 WELDMENT, Primary Idler Arm
40
41
39
Head, Self-Tapping (6)
24
23
REAR FRAME ASSEMBLY
42
32
27
36
40
24
ITEM PART NO. DESCRIPTION
22 5-8692 SPRING, Extension
23 9-0122 WASHER, 3/8” Flat
24 9-1585 NUT, 3/8-16 Hex Center Lock,
Grade 5
25 2-4344 PULLEY, Idler 3.50
26 9-1725 BOLT, 1/2-13 x 5/8” Shoulder
27 3-4937 BRACKET, Hydraulic Idler
28 4-5168 SPRING, 3/4” Extension
29 9-1553 SCREW, 3/8-16 x 1-3/4” Hex
Head Cap, Grade 5
30 3-9485 CABLE, Hydro Release Valve
31 9-1240 SCREW, #10-32 x 5/8” Hex
Washer Head, Machine (2)
32 1-8574 IDLER, 4.12 Flat
33 9-0376 NUT, #10-32 Hex Nyloc (2)
34 2-2886 SWITCH, Seat
35 9-1585 NUT, 3/8-16 Hex Center Lock
36 3-4938 GUIDE, Belt
37 5-8691 COVER, Spring
38 9-1272 FASTENER, Ratchet (4)
39 7-9832 BOLT, 3/8-16 x 4” Hex, Grade 5
40 4-3858 BUSHING, Flange (2)
41 7-5102 SLEEVE, Idler
42 9-1553 SCREW, 3/8-16 x 1-3/4” Hex
Head Cap, Grade 5
MANUAL No. 06147
7
Page 8
JOYSTICK & OPERATOR’S SEAT (YZ Models)
11
11A
37
MANUAL No. 06147
22
12
17
36
10
9
12
8
23
30
18
15
16
7
5
3
2
21
20
25
24
19
12
13
6
14
4
31
29
27
32
31
33
34
1
24
38
15
26
28
35
12
8
Page 9
JOYSTICK & OPERATOR’S SEAT (YZ Models)
ITEM PART NO. DESCRIPTION
1 3-5483 BRACKET, Right Hand Tank Support
2 4-2637 BRACKET, Joystick
3 3-5533 PIVOT, Joystick Control
4 4-2636 HANDLE, Joystick Control
5 9-1800 BOLT, 5/16-18 x 3/4” Shoulder (4)
6 2-3656 LEVER, Shift Handle
7 9-0844 PIN, 3/16 x 3/4” Roll
8 4-1831 FENDER, Right Hand
9 4-1840 CONSOLE, Right Hand
10 3-5936 BOOT, Joystick, Rubber
11 4-6246 BRACKET, Joystick Stop (Series 1)
11A 4-6494 BRACKET, Joystick Stop (Series 2)
12 9-0999 SCREW, 1/4 x 5/8” Pan Head Self-Tapping (11)
13 3-5481 BRACKET, Left Hand Tank Support
14 3-5482 BRACKET, Brake/Clutch Detent
15 9-1964 BOLT, 1/4-20 x 1/2” Hex Flange Lock (16)
16 4-1884 FENDER, Left Hand
17 4-6230 CONSOLE, Left Hand
18 9-0951 NUT, 5/16-18 Hex Large Flange Center Lock
19 4-4676 BUMPER, Battery
20 4-6561 TETHER, Seat
21 4-4897 SEAT (All Models)
22 9-1525 BOLT, 5/16-18 x 1/2” Hex Flange Lock, Grade 5 (4)
23 4-2968 CUP HOLDER
24 9-1542 SCREW, 5/16-18 x 1/2” Pan Head Self-Tap (Torx) (6)
25 3-3377 BRACKET, Fuel Tank
26 9-1593 COTTER-PIN, 3/8 Self Locking
27 9-1296 WASHER, 11/32 x 11/16” Flat
28 4-4717 CYLINDER, Joystick Control
29 4-4763 BRACKET, Joystick Control
30 9-1954 U-CLIP, 1/4” (14)
31 9-1020 PUSH-NUT, 1/4” (2)
32 4-4702 PIN, Joystick
33 9-1511 NUT, 5/16-18 Hex, Grade 5
34 9-1315 WASHER, 21/64 Split Lock
35 1-4664 BOLT, 5/16-18 x 1-1/32” Shoulder
36 4-4855 ARM REST (2)
37 4-6231 BRACKET, Arm Rest (2)
38 4-6236 BRACKET, Fuel Tank Mount
MANUAL No. 06147
9
Page 10
JOYSTICK & OPERATOR’S SEAT (EYZ Models)
MANUAL No. 06147
5
32
33
37
12
11A
6
7
*
37
4
SEE BELOW
35
36
11
10 9
23
8
3
24
2
1
35
*
32
36
34
22
24
13
12
29
18
14
27
28
17
26
15
30
31
16
25
12
15
10
Page 11
JOYSTICK & OPERATOR’S SEAT (EYZ Models)
ITEM PART NO. DESCRIPTION
1 3-5483 BRACKET, Right Hand Tank Support
2 4-2637 BRACKET, Joystick
3 3-5533 PIVOT, Joystick Control
4 4-3899 WELDMENT, Joystick Handle
5 9-1800 BOLT, 5/16-18 x 3/4” Shoulder (4)
6 2-3656 LEVER, Shift Handle (Grip)
7 9-0844 PIN, 3/16 x 3/4” Roll
8 7-4900 FENDER, Right Hand
9 7-5013 CONSOLE, Right Hand
10 3-5936 BOOT, Joystick, Rubber
11 4-6246 BRACKET, Joystick Stop
11A 4-6494 BRACKET, Joystick Stop
12 9-0999 SCREW, 1/4 x 5/8” Pan Head Self-Tapping (11)
13 3-5481 BRACKET, Left Hand Tank Support
14 3-5482 BRACKET, Brake/Clutch Detent
15 9-1964 BOLT, 1/4-20 x 1/2” Hex Flange Lock (16)
16 7-4952 FENDER, Left Hand
17 4-6230 CONSOLE, Left Hand
18 9-0951 NUT, 5/16-18 Hex Large Flange Center Lock
19 4-4676 BUMPER, Battery (shown on page 8)
20 4-6561 TETHER, Seat (shown on page 8)
21 4-4897 SEAT (All Models) (shown on page 8)
22 9-1525 BOLT, 5/16-18 x 1/2” Hex Flange Lock, Grade 5 (4)
23 4-2968 CUP HOLDER
24 9-1542 SCREW, 5/16-18 x 1/2” Pan Head Self-Tap (Torx) (6)
25 3-3377 BRACKET, Fuel Tank
26 9-1954 U-CLIP, 1/4” (14)
27 4-4855 ARM REST (2)
28 4-6231 BRACKET, Arm Rest (2)
29 4-6236 BRACKET, Fuel Tank Mount
30 9-1047 WASHER, .41 x 1.5 x 11 ga.
31 9-0368 SCREW, 5/16-18 x 3/4” Hex Washer Head Self-Tap
32 1-5753 BALL JOINT, 1/4-28 (2)
33 7-4911 ROD, Control R.H.
34 7-4893 ROD, Control, L.H.
35 9-1812 NUT, 1/4-28 Hex Nyloc (2)
36 9-1294 WASHER, 1/4” Flat (2)
37 9-1594 COTTER PIN, 1/2” Self-Lock (2)
MANUAL No. 06147
11
Page 12
FENDER & TRANSAXLE ASSEMBLY (YZ Models)
33
37
32
30
36
30
31
29
33
5
39
6
36
4
38
7
3
9
8
34
10
33
26
27
31
28
2
40
25
24
11
17
41
1
43
42
20
MANUAL No. 06147
22
14
19
16
9
20
21
L.H. FENDER
SHOWN
17
12
17
18
12
Page 13
FENDER & TRANSAXLE ASSEMBLY (YZ Models)
ITEM PART NO. DESCRIPTION
1 2-9128 TRANSAXLE, Hydro L.H. (Eaton Model X778-005)
2 2-9129 TRANSAXLE, Hydro w/o Manifold R.H. (Eaton Model X778-011)
3 1-5894 KEY, #605 Woodruff (2)
4 9-0539 SCREW, 1/4-20 x 1/2” Self-Tapping (8)
5 3-5337 FAN, 6” O.D., 10 Blade (2)
6 3-5336 PULLEY, Hydro Input (2)
7 9-1771 RING, Retaining (2)
8 4-1823 V-BELT, Hydro Drive
9 3-4915 BRACKET, Fender Support (2)
10 3-4916 BRACKET, Hydro Support
11 9-0362 SCREW, 1/4-20 Hex Washer Head, Self-Tapping (4)
12 3-4909 FENDER, L.H.
13 3-4908 FENDER, R.H. (Not Shown)
14 3-4917 BRACKET, Deck Support L.H.
15 3-5424 BRACKET, Deck Support R.H. (Not Shown)
16 9-1000 SCREW, 5/16-18 x 7/8” Pan Head, Self-Tapping (4)
17 9-0368 SCREW, 5/16-18 x 3/4” Hex Washer Head, Self-Tapping (26)
18 9-0324 SCREW, 3/8-16 x 1” Hex Washer Head, Self-Tapping (8)
19 3-4922 BRACKET, Hydro Control Cable (2)
20 2-9147 ROD END, #10-32 w/Stud (4)
21 9-1801 NUT, #10-32 Hex Center Lock (4)
22 2-9170 CABLE, L.H. Hydraulic Control
23 2-9169 CABLE, R.H. Hydraulic Control (Not Shown)
24 3-9484 BRACKET, Hydro Release Cable
25 9-0361 SCREW, 5/16-18 x 5/8” Hex Washer Head, Self-Tapping (2)
26 3-9483 BRACKET, Hydro Release Actuator (2)
27 1-2114 BUSHING, (2)
28 9-1841 SCREW, 5/16-18 x 1” Hex Washer Head, Self-Tapping (2)
29 3-4913 ARM, Brake (2)
30 9-1165 BOLT, 1/4-28 x 5/8” Hex Head, Grade 8 (4)
31 9-0746 WASHER, 1/4 Belleville (4)
32 3-4914 ARM, Brake (2)
33 9-1514 WASHER, 3/8 Flat (6)
34 2-9284 ROD, R.H. Brake
35 2-9142 ROD, L.H. Brake (Not Shown)
36 2-4874 COTTER-PIN, 1/2 Self-Locking (4)
37 2-4586 LINK, Swivel Brake (2)
38 7-4511 SPRING, Brake Compression (2)
39 9-1299 NUT, 3/8-16 Nyloc (2)
40 3-9485 CABLE, Hydro Release Valve
41 4-4767 DECAL, Hydro Reservoir (2)
42 9-0011 WASHER, #10 Internal Tooth Lock (2)
43 9-0013 NUT, #10-32 Hex (2)
NOTE: MOBIL 1 DTE 26 OIL FOR HYDRO TRANSAXLE
MANUAL No. 06147
13
Page 14
FENDER & TRANSAXLE ASSEMBLY (EYZ Models)
6
34
7
8
33
39
EUROPEAN
RETURN TO
NEUTRAL
COMPONENTS
57
36
41
53
33
38
37
59
56
30
31
29
36
5
4
3
2
1
25
40
24
11
10
13
9
58
19
9
MANUAL No. 06147
55
54
51
52
14
16
L.H. FENDER
SHOWN
17
18
14
Page 15
FENDER & TRANSAXLE ASSEMBLY (EYZ Models)
45
23
44
ITEM PART NO. DESCRIPTION
1 7-4904 TRANSAXLE, Hydro L.H. (similar
to Eaton Model X778-005)
2 7-4905 TRANSAXLE, Hydro R.H. (similar
to Eaton X778-011)
3 1-5894 KEY, #605 Woodruff (2)
4 9-0539 SCREW, 1/4-20x1/2” Self-Tap(8)
5 3-5337 FAN, 6” O.D., 10 Blade (2)
6 3-5336 PULLEY, Hydro Input (2)
7 9-1771 RING, Retaining (2)
8 4-1823 V-BELT, Hydro Drive
9 3-4915 BRACKET, Fender Support (2)
10 3-4916 BRACKET, Hydro Support
11 9-0362 SCREW, 1/4-20x5/8”, Self-Tap (4)
12 7-4903 FENDER, R.H.
13 7-4902 FENDER, L.H.
14 3-4917 BRACKET, Deck Support L.H.
15 3-5424 BRACKET, Deck Support R.H.
16 9-1000 SCREW, 5/16-18 x 7/8” Pan
Head, Self-Tapping (4)
17 9-0368 SCR, 5/16-18x3/4”, Self-Tap (26)
18 9-0324 SCREW, 3/8-16 x 1” Hex Washer
Head, Self-Tapping (8)
19 1-3874 BUSHING (4)
20 2-7344 WASHER, 5/8” SAE (3)
21 1-3550 ROLL PIN, 3/16 x 1” (2)
22 7-4898 SHAFT, Control
23 9-0872 BOLT, 1/4-20 x 1-1/8” Hex
Flange Lock (2)
24 3-9484 BRACKET, Hydro Release Cable
25 9-0361 SCR., 5/16-18x5/8”, Self-Tap (2)
26 3-9483 BRACKET, Hydro Release
Actuator (2)
27 1-2114 BUSHING, (2)
28 9-1841 SCR., 5/16-18x1”, Self-Tap (2)
49
33
21
19
17
36
46
17
42
43
33
22
21
16
15
EUROPEAN
36
RETURN TO NEUTRAL
COMPONENTS
12
R.H. FENDER
SHOWN
19
33
44
36
20
48
23
ITEM PART NO. DESCRIPTION
29 7-4739 ARM, Control (2)
30 9-1165 BOLT, 1/4-28 x 5/8” Hex, Gr. 8 (4)
31 9-0746 WASHER, 1/4 Belleville (4)
32 3-4914 ARM, Brake (2)
33 9-0122 WASHER, 3/8 Flat (6)
34 2-9284 ROD, R.H. Brake
35 2-9142 ROD, L.H. Brake (Not Shown)
36 2-4874 COTTER-PIN, 1/2 Self-Lock (4)
37 2-4586 LINK, Swivel Brake (2)
38 7-4511 SPRING, Brake Compression (2)
39 9-1299 NUT, 3/8-16 Nyloc (2)
40 3-9485 CABLE, Hydro Release Valve
41 4-4767 DECAL, Hydro Reservoir (2)
42 7-4947 BRACKET, Fender Mount
43 9-1070 NUT, 5/16-18 Hex Fl. Lock (13)
44 9-1099 NUT, 1/4-20 Hex Center Lock (2)
45 7-4894 BRACKET, Control
46 7-4896 ROD, Transfer, R.H.
47 9-1099 NUT, 1/4-20 Hex Center Lock (2)
48 7-4912 LEVER, Control, L.H.
49 7-4895 LEVER, Control, R.H.
50 7-4897 ROD, Transfer, L.H.
51 7-4732 PLATE, Return (2)
52 1-4155 BOLT, 5/16-24 x 1-1/8” Round
Head Rib Necked (4)
53 7-4891 SPACER (2)
54 7-5216 SPACER, Adjusting (2)
55 7-4890 SPRING, Return (2)
56 9-1825 SCREW, 1/4-20 x 1” Self-Tap (4)
57 7-4892 WASHER, Adjustment (2)
58 9-0480 NUT, 5/16-24 Hex Fl. Lock (4)
59 9-0250 WASHER, 1/2” SAE (2)
50
36
33
15
Page 16
CLUTCH ASSEMBLY
MANUAL No. 06147
5
4 8
4
7
11
2
3
21
12
9
9
17
18
3
19
20
16
10
16
6
7
13
1
22B
22A
2
14
15
Page 17
CLUTCH ASSEMBLY
ITEM PART NO. DESCRIPTION
1 9-1735 SCREW, 7/16-20 x 8” Hex Head Cap, Grade 5
2 2-9138 WASHER, 7/16 x 1” O.D. Flat (2)
3 2-9136 BEARING, 6305 w/Snap-Ring (2)
4 9-1070 NUT, 5/16-18, Grade 5 (6)
5 2-9117 V-BELT, Drive 5L Cogged, 50.170” nominal effective length
6 2-9107 PULLEY, Jackshaft
7 9-1829 SCREW, 1/4-20 x 1/2” Set w/Patch (2)
8 6-3269 SUPPORT, Jackshaft
9 9-1508 BOLT, 5/16-18 x 3/4 Carriage, Grade 5 (6)
10 2-9135 JACKSHAFT
11 1-3250 KEY, 1/4 x 1” Square (2) (Qty. 1 on 38” units)
12 7-4573 BRACKET, Anti-Rotate (Ogura) (33” units)
13 2-9232 CLUTCH, Electric (Ogura) (33” units)
-- 7-4022 CLUTCH, Electric (Warner) (38” units)
14 9-1301 WASHER, 7/16” Split Lock
15 9-0460 NUT, 7/16-20, Grade B
16 9-1527 SCREW, 5/16-18 x 1-1/4”, Hex Head Cap, Grade 5
17 2-9704 BUMPER, Electric Clutch
18 3-4448 WASHER, Rectangular Steel
19 9-1315 WASHER, 5/16” Split Lock
20 9-1511 NUT, 5/16-18, Grade 5
21 1-2652 CLIP, Wire, 7/16
22A 2-9137 SPACER, 1.010 I. D. x 1.312 O. D.
22B 7-5110 SPACER, 1.010 I. D. x 1.625 O. D. (Ogura)
17
MANUAL No. 06147
Page 18
DECK LIFT HANDLE ASSEMBLY
7
17
PIVOT BRACKET
(PART OF FRONT FRAME
WELDMENT, P/N 4-2471)
MANUAL No. 06147
1
3
5
2
18
4
10
13
6
19
9
8
11
16
9
10
14
9
15
12
7
6
18
Page 19
DECK LIFT HANDLE ASSEMBLY
ITEM PART NO. DESCRIPTION
1 4-1924 HANDLE, Deck Lift
2 4-1925 BRACKET, Pivot Support
3 5-8090 LEVER, Deck Lift/Handle Release (Series 2)
4 2-9040 WASHER, Slipper
5 4-6489 SPRING, Torsion (Deck Position)
6 9-0072 SCREW, 1/4-20 x 5/8” Hex head Cap, Gr. 5 (2)
7 9-0583 NUT, 1/4-20 Hex Flange Lock (3)
8 3-5489 BAR, Deck Lift
9 9-1514 WASHER, 3/8” Flat (3)
10 9-1503 HAIRPIN, 3/32 x 1-1/2” (2)
11 4-6392 PIN, 3/8 x 7/8” Large Head Clevis
12 5-8077 PLATE, Detent (Series 2)
13 9-1318 SCREW, 5/16-18 x 3/4” Hex Cap, Gr.5
14 9-1070 NUT, 5/16-18 Hex Flange Lock, Gr.5
15 4-6457 DECAL, Deck Position
16 9-1887 PIN, 3/8 x 1/2” Expanded Head Clevis
17 4-6491 PIN, 3/8 x 1-5/8” Clevis
18 4-6490 SPACER
19 9-1597 PIN, 3/32" x 3/4" Cotter
MANUAL No. 06147
19
Page 20
BRAKE/CLUTCH LEVER ASSEMBLY
MANUAL No. 06147
1
16
15
11
12
13
same part
2
REAR FRAME
RIGHT SIDE WALL
16
17
3
12
14
10
17
4
8
6
7
12
9
11
5
20
Page 21
BRAKE/CLUTCH LEVER ASSEMBLY
ITEM PART NO. DESCRIPTION
1 2-9383 GRIP, 5/16 x 2-1/2” Vinyl
2 3-5945 GRIP, Brake/Clutch Handle
3 3-5479 ROD, Park Brake (16.30” Arc Radius)
-- 5-8542 ROD, Park Brake (10” Arc Radius)
4 3-5946 SPRING, Brake/Clutch Release
5 3-5485 ARM, Brake/Clutch Lever
6 3-5484 PIVOT, Brake/Clutch Lever
7 9-1293 SCREW, 1/4-20 x 3/8” Hex Self-Tapping
8 5-8541 TUBE, Brake/Clutch Lever
9 1-0694 BUSHING, Nylon
10 2-9207 ROD, Brake/Clutch
11 5-2431* PIVOT, Foot Shaft Assembly (2)
12 9-0841 ROLL-PIN, 3/16 x 1-1/2” (3)
13 2-9208 ARM, Brake/Clutch
14 4-2614 ARM, Brake/Clutch
15 7-4948 STOP, Deck
16 9-1000 SCREW, 5/16-18 x 7/8” Pan Head Self-Tap (Torx) (4)
17 9-1070 NUT, 5/16-18 Hex Flange Lock (4)
*NOTE: Includes Grease Fitting, Part No. 1-3864
MANUAL No. 06147
21
Page 22
33” MOWER DECK ASSEMBLY
(page 1 of 4)
MANUAL No. 06147
30
1
31
5
36
3
30
36
4
31
31
31
*
2
*
18
29
27
25
17
35
34
33
*
26
22
8
19
24
28
16
16
17
23
15
31
36
8
6
7
31
2
21
20
5
31
3
30
*NOTE: The heads of indicated fasteners
are located underneath the deck.
30
22
Page 23
ITEM PART NO. DESCRIPTION
1 6-1956* DECK, 33” Replacement
2 3-4866 BRACKET, Deck Lift Slotted (2)
3 3-4867 BRACKET, Deck Lift (2)
4 3-3570 BRACKET, Anti-Scalp Adj. Front
5 3-3571 BRKT., Anti-Scalp Adj. Side (2)
6 3-6579 BAR, Weight Rear
7 9-0747 BOLT, 3/8-16 x 1” Carriage (2)
8 9-0546 NUT, 3/8-16 Hex Center Lock (6)
9 4-2586 ARM, Front Lift (weldment)
10 1-0935 WASHER, 3/4” (4)
11 1-5447 ECCENTRIC, Leveling
(3/8-24 thread)
12 9-0390 WASHER, 3/8” Internal Tooth Lk.
13 3-4815 ARM, Front Lift
14 9-0163 SCREW, 3/8-24 x 1-1/4” Hex
Head Cap
15 3-8018 BRACE, Spindle
16 9-1588 BOLT, 3/8-16 x 3/4” Hex Flange
Lock, Grade 5 (7)
17 9-0613 NUT, 3/8-16 Hex Flange Lock (4)
18 3-4168 BLADE, 33” High Lift
-- 1-9523 BLADE (Model EYZ15334BVE)
19 9-0392 SCREW, 1/2-20 x 1” Hex Head
Cap, Grade 5 (2)
20 9-0509 WASHER, 1/2” Internal Tooth
Lock (2)
43
37
10
11
*NOTE: 6-1956 is a painted deck with decals 2-2991, 2-6831 and 4-6720.
9
13
10
42
33” MOWER DECK ASSEMBLY
(page 2 of 4)
41
40
28
12
10
32
14
ITEM PART NO. DESCRIPTION
21 9-0559 NUT, 1/2-20 Hex Jam (2)
22 5-2917 ASSEMBLY, Spindle
23 1-2670 RING, 2” Tolerance
24 1-0740 RING, 2” Retaining (2)
25 4-2587 ARM, Idler (weldment)
26 1-4407 WASHER, Spindle
27 2-6558 PULLEY, Spindle
28 3-2028 WASHER, 25/32” Flat (4)
29 7-4467 NUT, 3/4-16 Hex Jam,
Grade 8
30 9-0595 BOLT, 5/16-18 x 3/4” Hex
Flange Lock (8)
31 9-0585 NUT, 5/16-18 Hex Fl. Lock (14)
32 4-2585 ARM, Rear Lift (weldment)
33 9-0700 BOLT, 5/16-18 x 1-1/2” Hex
Flange Lock, Grade 5
34 2-8620 SPACER, 11/32”
35 9-1067 NUT, 5/16-18 Hex Lock
36 9-0004 BOLT, 5/16-18 x 1/2” Short
Neck Carriage (6)
37 3-5495 ROD, Cutting Deck Timing
38 2-4586 SWIVEL, Brake Link PM
39 2-1815 SPACER, 25/64”
40 9-0122 WASHER, 3/8”
41 1-6231 HAIRPIN, #13
42 2-2717 ROD, Deck Support
43 1-7847 RING, 7/16” Snap
8
39
38
10 28
MANUAL No. 06147
23
Page 24
33” MOWER DECK ASSEMBLY (page 3 of 4)
67
65
MANUAL No. 06147
49
46
66
52
44
50
58
68
45
56
47
53
59
69
48
62
57
55
58
57
57
63
51
62
71
54
60
64
69
72
61
46
45
44
24
Page 25
33” MOWER DECK ASSEMBLY
(page 4 of 4)
ITEM PART NO. DESCRIPTION
44 9-1532 SCREW, 3/8-24 X 3/4” Hex Head Cap, Grade 5 (3)
45 1-5272 SPACER, 3” Long (3)
46 1-9190 WHEEL, Gage (3)
47 5-2555 ASSEMBLY, 28” & 33” Discharge Chute (includes 48 thru 53)
48 1-6341 SPRING, Hinge
49 2-6233 CHUTE, Discharge
50 2-6234 ROD, Chute
51 2-6483 WASHER, Palnut (for 1/4” rod)
52 2-6831 DECAL, CPSC
53 3-3780 HINGE, Plastic Side Chute
54 9-1811 BOLT, 5/16-18 x 5/8” Hex Flange Lock, Grade 5 (3)
55 9-1601 NUT, 5/16-18 Hex Flange Lock, Grade 5 (3)
56 2-7717 IDLER, 4” Outside Diameter Flat
57 9-1514 WASHER, 11/32” Flat (4)
58 9-1585 NUT, 3/8-16 Hex Center Lock
59 3-5969 SPRING, External
60 3-5389 V-BELT, HA Section, 55.2” Effective Length
61 2-8021 COVER, Chain (2)
62 9-1503 HAIRPIN, 3/32 x 1-1/2” (3)
63 2-8728 ADJUSTER, Chain (2)
64 2-8200 SWIVEL, Adjustable (2)
65 9-1508 BOLT, 5/16-18 x 3/4” Short Neck Carriage, Grade 5
66 9-1296 WASHER, 11/32” Flat
67 9-0492 NUT, 5/16-18 Wing
68 9-1528 WASHER, 3/8” Flat
69 9-1600 NUT, 3/8-24 Hex Center Lock (3)
70 1-4852 DECAL, Caution
71 1-6973 DECAL, Caution
72 2-2991 DECAL, Hi-Vac
25
MANUAL No. 06147
Page 26
38” MOWER DECK ASSEMBLY (page 1 of 4)
30
MANUAL No. 06147
24
*NOTE: The heads of indicated fasteners
are located underneath the deck.
1
31
30
18
9
30
19
31
23
30
27
39
37
12
2
11
13
22
34
21
71
30
17
26
35
26
33
31
13
14
23
9
22
20
34
16
36
30
30
31
31
15
30
2
19
Page 27
38” MOWER DECK ASSEMBLY
8
ITEM PART NO. DESCRIPTION
1 6-1957* DECK, 38” Replacement
2 5-4513 ASSEMBLY, Spindle (see page
23 for breakdown) (2)
3 1-5447 ECCENTRIC, Leveling (3/8-24
thread)
4 3-4815 LIFT ARM, Front
5 9-0390 WASHER, 3/8” Internal Tooth Lk.
6 9-0163 SCREW, 3/8-24 x 1-1/4” Hex
Head Cap, Grade 5
7 4-2586 LIFT ARM, Front (weldment)
8 1-0935 WASHER, 3/4” x1-1/8” Flat (4)
9 2-9213 PULLEY, 4-1/2” O. D., A/B
Groove (2)
10 3-5495 ROD, Cutter Deck Timing(3/8-16)
11 5-8440 ASS’Y, Idler Arm (incl. 12-14)
12 5-8439 WELDMENT, Idler Arm
13 1-1016 BUSHING, 1/2” Nylon (2)
14 1-3864 LUBE FITTING, 3/16” Press Fit
15 3-3756 BRACKET, Gage Wheel
16 3-3891 BRACKET, Left Hand Wheel
17 3-4861 BRK’T, 38” Deck Lift, LH Front
18 3-4863 BRK’T, 38” Deck Lift, RH Front
19 9-0636 SCREW, 5/16-18 x 1” Hex Head
Cap, Grade 5 (6)
20 3-5566 BRK’T, Left Hand Rear Lift Arm
21 9-1575 NUT, 5/16-18 Hex Center Lock
Grade 5 (2)
10
*NOTE: 6-1957 is a painted deck with decals 2-6154, 2-6831 and 4-6720.
3
4
7
5
8
38
52
38
25
8
6
ITEM PART NO. DESCRIPTION
22 9-0613 NUT, 3/8-16 Hex Flange Lock (3)
23 9-1006 NUT, 5/8-18 Hex Nyloc (2)
24 3-5494 BRACKET, Gage Wheel
25 4-2585 TIMING ARM, Rear (weldment)
26 4-2964 STUD, Idler (5/16-24 thread)
27 4-4648 BRACKET, Stationary Idler
28 2-4586 SWIVEL, Brake Link
29 1-6231 HAIR PIN, #13
30 9-0585 NUT, 5/16-18 Hex Flange Lock,
Grade 5 (19)
31 9-1026 BOLT, 5/16-18 x 5/8” Short Neck
Carriage, Grade 5 (13)
32 9-0546 NUT, 3/8-16 Hex Center Lock,
Grade 5
33 1-1201 NUT, 5/16-24 Hex Center Lock
34 9-1547 BOLT, 3/8-16 x 3/4” Short Neck
Carriage, Grade 5 (3)
35 9-1587 WASHER, 1/2” x 1-1/16” Flat (3)
36 9-1082 COTTER-PIN, 3/32 x 3/4”
37 9-0958 BOLT, 5/16-18 x 1-1/2” Short
Neck Carriage, Grade 5
38 3-2028 WASHER, 3/4” x 1-1/2” Flat (2)
39 2-8620 SPACER, .340 I. D. x .630 O. D.
x .310 Thick
40 2-1815 SPACER, .391 I. D. x .520 O. D.
x .531 Thick
8
(page 2 of 4)
29
32
40
28
MANUAL No. 06147
27
Page 28
38” MOWER DECK ASSEMBLY
(page 3 of 4)
43
*NOTE: The heads of indicated fasteners
are located underneath the deck.
MANUAL No. 06147
60
46
42
61
59
52
21
22
64
63
52
57
62
58
70
68
69
66
45
65
67
66
54
47
55
67
52
65
52
66
52
56
42
48
51
50
58
44
NOTE: Item 54 mounts
beneath Item 12.
49
52
53
42
43
43
28
Page 29
38” MOWER DECK ASSEMBLY
(page 4 of 4)
ITEM PART NO. DESCRIPTION
42 2-6122 WHEEL, 4 x 1-1/2” Offset (3)
43 9-1526 SHOULDER BOLT, 3/8-24 (3)
44 2-6831 DECAL, CPSC- Heavy Adhesive
45 2-2717 ROD, Deck Suppo rt
46 1-7847 RING, .438 External Retaining
47 2-9308 V-BELT, HA Section 89.8” Effective Length
48 2-8021 COVER, Chain (2)
49 2-8728 ADJUSTER, Chain (2)
50 2-8200 SWIVEL, Adjustable (2)
51 9-1503 HAIR PIN, 3/32 x 1-1/2” (3)
52 9-1514 WASHER, 3/8” I. D. x 13/16” O. D. Flat (13)
53 2-6154 DECAL, 38” Deck
54 3-6561 BELT GUIDE, 38/42” Decks
55 3-5969 SPRING, Extension
56 2-4452 IDLER, 4” O. D. Flat
57 7-2319 IDLER, 4-1/8” O. D. Flat
58 1-2063 WASHER, Cone (2)
59 2-9425 CHUTE, Discharge
60 3-5502 ROD, Pivot, Side Discharge
61 9-1508 BOLT, 5/16-18 x 3/4” Short Neck Carriage, Grade 5
62 3-5503 ROD, Mounting, Side Discharge
63 3-5813 SPRING, Torsion- Side Discharge
64 3-6543 TEENUT, 5/16-18 Thread
65 9-1560 SCREW, 3/8-16 x 2-1/4” Hex Head Cap, Grade 5
66 9-0289 NUT, 3/8-24 Hex Center Lock, Grade 5 (3)
67 9-1585 NUT, 3/8-16 Hex Center Lock, Grade 5 (2)
68 9-1833 SCREW, 5/16-18 x 5/8” Pan Head
69 4-6720 DECAL, Chute/Deflector Warning
70 9-1296 WASHER, 5/16” I. D. x 11/16” O. D.
71 9-1528 WASHER, 3/8” I. D. x 7/8” O. D. Flat
29
MANUAL No. 06147
Page 30
33” SPINDLE ASSEMBLY
4
9
10
4
3
1
9
7
10
5
8
6
2
ITEM PART NO. DESCRIPTION
1 4-7962 HOUSING, Spindle
2 2-4687 SPINDLE, Shaft (7.54” Long)
3 1-4407 WASHER
4 1-3313 BEARING, Spindle (2)
5 3-7751 HOLDER, Blade
6 1-2491 RING, 1-3/4” External Retaining (2)
7 1-0817 FITTING, Lube
8 9-0356 NUT, 5/8-18 Hex Center Lock Jam
9 9-0392 SCREW, 1/2-20 x 1” Hex Head Cap (2)
10 9-0559 NUT, 1/2-20 Hex Jam (2)
MANUAL No. 06147
30
Page 31
ITEM PART NO. DESCRIPTION
9
3
6
7
8
38” SPINDLE ASSEMBLY
2
3
2
4
5
10
1
-- 5-8357 ASSEMBLY, Spindle Housing, 38” Cutting Deck
(Includes items 2 thru 9)
1 1-0817 FITTING, Lube
2 1-2491 RING, Retaining (2)
3 1-3313 BEARING, Spindle (2)
4 5-9378 HOUSING, Spindle (weldment)
5 7-2537 SHAFT, Spindle (7.155” Long)
6 7-2109 WASHER, Spindle
7 2-4467 WASHER, Belleville, 19/32” I.D. x 1-3/4” O.D. (2)
8 9-1633 NUT, 9/16-18 Hex Jam
9 4-2998 BLADE, 19”
10 7-2440 SPACER, Pulley (.655” ID x 1.755” OD x .28” Thick)
MANUAL No. 06147
31
Page 32
ENGINE COMPONENTS
** PURCHASE ENGINE AND
ENGINE PARTS OTHER THAN
THOSE LISTED FROM ENGINE
SERVICE OUTLETS.
MANUAL No. 06147
1
2
10
12
14
16
17
15
31
20
5
22
30
8
4
21
20
3
9
11
6
7
13
28
32
18
23
ASSEMBLY
26
27
29
25
24
22
19
Page 33
ENGINE COMPONENTS
ITEM PART NO. DESCRIPTION
1 -- ENGINE, 14.5 HP Briggs (Model 287707, Type 1236, Trim E1)
- -- ENGINE, 15 HP Briggs (Model 281H07, Type 0111, Trim E1)
- -- ENGINE, 15 HP Briggs (Model 281H07, Type 0113, Trim E1 Euro)
2 1-2652 WIRE CLIP, 7/16”
3 2-7972 ASSEMBLY, Oil Valve
4 4-6259 CONTROL, Engine Control
5 2-3655 LEVER, Engine Control
6 9-1240 SCREW, #10-32 x 5/8” Hex Washer Head, Grade 5 (2)
7 9-0376 NUT, #10-32 Hex Nyloc (2)
8 9-1017 SCREW, #8-32 x 3/8” Cross Recess Fillister Head Machine
9 9-1018 NUT, #8-32 Hex
10 3-6389 PLATE, Engine
11 9-0324 SCREW, 3/8-16 x 1” Hex Washer Head (Briggs) (4)
12 3-5362 GUIDE, Belt
13 4-1822 PULLEY, Engine (Small Pulley- Down)
14 1-0210 KEY, 1/4” x 2” Square
15 9-1807 SPACER, Clutch
16 9-1301 WASHER, 7/16” Split Lock
17 9-1763 SCREW, 7/16-20 x 1-1/2” Hex Head Cap, Grade 5
18 7-4453 MUFFLER, (14.5 HP Briggs)
19 1-5352 GASKET, Exhaust
20 9-0290 SCREW, 1/4-20 x 3/4” Self-Tapping Grade 5 (2)
21 3-2015 HOSE, Fuel 1/4” I.D. x 7” long
22 2-9900 CLAMP, Fuel Hose (2)
23 5-1905 ASSEMBLY, Fuel Tank (Includes tank & cap)
24 ** TANK, Fuel (not sold separately)
25 1-2515 CAP, Fuel
26 9-1738 SCREW, 5/16-18 x 3/4” Socket Head Cap Grade 8 (2)
27 9-1627 WASHER, 1/4” Lock Split (2)
28 2-4356 GUARD, Muffler
29 7-4965 HEAT SHIELD, Muffler
30 9-0052 WASHER, 1/4” Split Lock
31 9-1016 SCREW, 1/4-20 x 5/8” Hex Head Self-Tap (2)
33
MANUAL No. 06147
Page 34
DECALS
1
4
8
2
3
5
6
7
9
10
MANUAL No. 06147
12
11
34
Page 35
ITEM PART NO. DESCRIPTION
1 3-5848 DECAL, SNAPPER Z Rider
2 4-6350 DECAL, Yard Cruiser
-- 4-5359 DECAL, Yard Cruiser
3 4-4767 DECAL, Hydro Reservoir
4 7-1683 DECAL, Hydro Release
5 4-5167 DECAL, Parking Brake
6 1-6973 DECAL, Caution
7 1-4852 DECAL, Caution
8 4-6366 DECAL, Engine Control
9 4-6426 DECAL, Deck Height
10 4-6443 DECAL, Ignition Switch
11 2-2991 DECAL, 33” Hi-Vac
12 2-6154 DECAL, 38 Inch
13 4-5173 DECAL, Operation
14 4-6457 DECAL, Deck Position
15 2-6831 DECAL, CPSC
16 4-6441 DECAL, Safety Instruction
17 2-9113 DECAL, Caution Fuel
18 7-3335 DECAL, OPEI
19 4-6720 DECAL, Warning Chute/Deflector
18
17
13
15
19
DECALS
14
16
MANUAL No. 06147
35
Page 36
EUROPEAN DECALS
ITEM PART NO. DESCRIPTION
1 2-2841 DECAL, Warning, International Symbol
2 2-9784 DECAL, Deck Chute, International Warning
3 6-3280 DECAL, Safety Symbols
4 2-8700 DECAL, Chute/Read Manual
5 6-3279 DECAL, Deck Adjust
MANUAL No. 06147
1
3
2
4
5
36
Page 37
6 4-6304 DECAL, Park Brake (Euro)
7 7-4135 DECAL, Sound 100
8 2-9776 DECAL, Euro Community (CE)
9 7-5378 DECAL, 2003 Year of Manufacture
10 2-9113 DECAL, Caution, Fuel (English)
11 2-9114 DECAL, Caution, Fuel (Dutch)
12 2-9345 DECAL, Caution, Fuel (French)
13 2-9346 DECAL, Caution, Fuel (German)
14 7-3199 DECAL, Caution, Fuel (Italian)
15 7-3200 DECAL, Caution, Fuel (Spanish)
6
7
10
12
14
37
EUROPEAN DECALS
11
8
9
13
15
MANUAL No. 06147
Page 38
ELECTRICAL COMPONENTS
K.
N.
GROUND
(ENGINE BOLT)
11
BLACK
O.
P.
FUSE
12
9
G.
F.
10
1
E.
D.
H.
C.
7
ON BATTERY END
OF ITEM 5
8
D.
(ITEM 1)
4
A.
F.
B.
PLUG
5
20
17
2
P.
18
19
16
15
14
21
3
I.
GROUND (CHASSIS)
D.
6
13
J.
MANUAL No. 06147
DRAIN TUBE
38
Page 39
ELECTRICAL COMPONENTS
ITEM PART NO. DESCRIPTION
1 7-5047 WIRING HARNESS (14.5 & 15HP Briggs) (38" Deck Series 3 & 4)
-- 4-7041 WIRING HARNESS (14.5 & 15HP Briggs) (33" Deck Series 3 & 4)
2 9-0977 NUT, 1/4-20 Hex Jam (2)
3 9-0411 SCREW, #10-24 x 1/2” Hex Head Cap (2)
4 3-5926 WIRING HARNESS, Warner Clutch (38” units)
5 1-6835 WIRE, Positive, 13"
6 4-2956 WIRE, Negative, 14”
7 7-1694 COVER, Battery Cable
8 2-8570 RELAY, Operator Presence Control (for 13 HP Briggs)
-- 5-8211 RELAY, Operator Presence Control (with bracket) (for 14.5 & 15 HP Briggs)
9 2-2886 SWITCH, Seat (NC/NO)
10 2-8542 SWITCH, PTO Electric Clutch
11 2-3355 SWITCH, Park Break (NC/NO)
12 9-0913 SCREW, #10-24 x 1/2” Hex Washer Head, Self-Tapping (3)
13 2-9130 BATTERY, 12 Volt, 14 Amp, 190 Cold Cranking Amp
(Includes Drain Tube)
14 2-6343 SWITCH, Ignition (Includes #1-1138 Keys)
15 2-9714 SPACER
16 2-3506 BEZEL
17 7-5622 SOLENOID, 12 Volt (Was 18604)
18 9-0071 SCREW, 1/4-20 x 1/2” Hex Head Cap, Grade 5 (2)
19 9-1584 NUT, 1/4-20 Hex Flange Lock, Grade 5 (2)
20 9-1314 WASHER, 1/4 Internal Tooth Lock (3)
21 1-2688 NUT, #10-24 Hex Twin “Whiz” Lock (2)
22 3-5661 SPACER, PTO Switch (Not Shown)
PLUG CONNECTS TO:
A. Brake Switch
B. PTO Switch
C. Seat Switch
D. Electric Clutch
E. Relay
F. Solenoid Battery Terminal
G. Solenoid Starter Terminal
H. Ignition Switch
I. Battery, Positive Terminal
J. Battery, Negative Terminal
K. Alternator
L. Ignition Ground
M. Anti-After Fire
N. Start Engine
O. Solenoid “Spade” Terminal
P. Solenoid “Spade” Terminal
Q. Ground at Solenoid
MANUAL No. 06147
39
Page 40
WIRING SCHEMATIC
MANUAL No. 06147
Part No. 4-7041 for YZ145333BVE, YZ15334BVE, YZ145383BVE, YZ15384BVE and EYZ15334BVE
40
Page 41
NOTES
41
Page 42
NOTES
42
Page 43
NOTES
43
Page 44
Parts Manual for
TM
YARD CRUISER
HYDRO DRIVE
YZ SERIES 3 & 4
IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND
PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD
IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH
CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.
COPYRIGHT © 2003
SNAPPER PRODUCTS INC.
ALL RIGHTS RESERVED
MANUAL No. 06147 (Rev. 3, 06/05/03) PRINTED IN U.S.A.
44
Loading...