Snapper R8002BE, R5002R, R5002B, R8002B, RT5X User Manual

Parts Manual fo

r

R

E

8

S

LARGE FRAME REAR TINE TILLERS

SERIES 2

MODEL

R5002B
R5002
R8002B

R8002B

RT5

RT5X

RT

RT8

COPYRIGHT ©2006
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.

Revision 5,

McDonough, GA, 30253 U.S.A.

6/20/2006

Manual No. 7006033

TP 400-5202-5-RT-N

s

PAGE GROUP

4
6

8
12
14
18
22
24
26
28
30
32
36
40
42
44
46
48
50

Wheels, Tires, Rims
Handle & Controls
Handle & Controls 8 HP, RT5X
Engine & Drive Parts
Frame (5HP), Traction Drive
Frame (8HP), Traction Drive
Frame Components (Left Side) (5 HP)
Frame Components (Left Side) (RT5X & RT8)
Primary Chain Case
Shift Quadrant
Idler Bracket Assembly
Tiller Head
Main Chain Case
Tine Assembly
Electric Start Components
Decals
Garden Tool Kit (P/N 60559 Hauling Tray Kit)
Garden Tool Accessories (P/N 60730 Harrow Kit)
Garden Tool Accessories (P/N 60731 Hiller Furrower Kit)

Table Of Content

SERIES 2

Manual No. 7006033LARGE FRAME REAR TINE TILLERS

3

TP 400-5202-5-RT-N

Wheels, Tires, Rims

Manual No. 7006033 LARGE FRAME REAR TINE TILLERS
TP 400-5202-5-RT-N

4

SERIES 2

Wheels, Tires, Rims

p

y

Part No Descri

1 7018579 ASSEMBLY, Right Wheel 13 x 5.00 - 6 (RT5) (Includes items 2, 3, & 4)

7018580 ASSEMBLY, Left Wheel 13 x 5.00 - 6 (RT5) (Includes items 2, 3, & 4)
2 7014511 TIRE, 13 x 5.00 x 6 (Chevron Lug)
3 7014512 RIM, 13 x 5 x 6
4 7012234 VALVE, Air (Snap-In)
5 7059646 ASSEMBLY, Left Wheel (8HP & RT5X) (Includes items 4, 6, & 7)

7050730 ASSEMBLY, Right Wheel (8HP & RT5X) (Includes items 4, 6, & 7)
6 TIRE, 16 x 4.80 x 8 (Chevron Lug) (Not Available) Was 12256
7 7017145 RIM, 4.80-4.00 x 8 (3 hole) Was 12162
8 7090244 2 SCREW, 5/16-24 x 1 5/8" Hex Head Cap, Grade 5 (RT5) Was 90359
9 7090391 2 WASHER, 5/16 Internal Tooth Lock (RT5)

10 7091297 2 NUT, 5/16-24 Hex (RT5) Was 90223
11 7091502 6 SCREW, 1/2-20 x 3/4" Hex Head Cap Was 90367 (8HP & RT5X)
12 7092062 6 NUT, 5/16-24 Hex Lock, GR C Was 11201 (8HP & RT5X)
13 7040434 HUB. Wheel Structure (8HP & RT5X)
14 7011035 2 BOLT, 5/16-24 x 1 5/8" Tapered (8HP & RT5X)

tionItem Qt

Note

Footnotes:

Manual No. 7006033LARGE FRAME REAR TINE TILLERS

SERIES 2

5

TP 400-5202-5-RT-N

Handle & Controls

Manual No. 7006033 LARGE FRAME REAR TINE TILLERS
TP 400-5202-5-RT-N

6

SERIES 2

Handle & Controls

p

y

Part No Descri

1 7035206 BAR, Handle Was 35025
2 7014681 2 BUSHING
3 BAIL (Not Available) Was 18577
4 7014682 CLIP, Cable
5 7036061 PANEL, 5 HP
6 LINK, Wire 2.25" (Not Available) Was 14719
7 7091122 2 SCREW, 1/4-20 x 1/2" Self-Tapping Was 90539
8 7014720 CLIP-SNAP
9 7090858 3 SCREW, 5/16-18 x 1/2" Self-Tapping

10 BRACKET (Not Available) Was 32284
11 2 PLATE, Tap (Not Available) Was 51462
12 TUBE, Handle Bar Support (Not Available) Was 38066
13 7022295 GRIP, Handle Was 10681
14 7014380 SPRING
15 LATCH (Not Available) Was 40509
16 7010935 WASHER, Flat .77 x 1.13 x .06
17 7090620 2 NUT, 3/4-16 Hex Lock
18 7047854 BRACKET, Latch
19 7090361 6 SCREW, 5/16-18 x 5/8" Self-Tapping
20 7090289 NUT, 3/8-24 Hex Center Lock
21 7091588 4 BOLT, 3/8-16 x 3/4" Hex Flange Lock Was 90612
22 7036106 BRACKET, Handle
23 7090169 SCREW, 3/8-24 x 2 1/2" Hex Head Cap
24 7090864 WASHER, 13/16 Flat
25 7014840 RETAINER, Nut Locking
26 7091809 COTTER-PIN, 5/32 x 1 1/4" Was 90654
27 7015251 SPRING, Traction Cable
28 7018776 CABLE, Traction Control
29 7057415 CABLE, Tine Control (Includes items 6 & 8)
30 7015252 SPRING, Tine Cable
31 7091575 2 NUT, 5/16-18 Hex Lock Was 90184
32 7090188 4 WASHER, 5/16 Flat
33 7091830 2 SCREW, 5/16-18 x 3" Hex Head Cap Was 90553

tionItem Qt

Note

Footnotes:

* NOTE: This part may be available from DPNI 1-800-558-1848 (Todd Graff)

Manual No. 7006033LARGE FRAME REAR TINE TILLERS

SERIES 2

7

TP 400-5202-5-RT-N

Handle & Controls 8 HP, RT5X

Manual No. 7006033 LARGE FRAME REAR TINE TILLERS
TP 400-5202-5-RT-N

8

SERIES 2

Handle & Controls 8 HP, RT5X

p

y

Part No Descri

1 7035206 BAR, Handle Was 35025
2 7014681 2 BUSHING
3 * WIRE, Ground 40" (RT8 Manual Start) (Not Available) Was 14384
4 BAIL (Not Available) Was 18577
5 7011853 SWITCH, Ignition (RT8 Manual Start) Was 15211 (See "Electric Start

6 7011138 KEY, Switch
7 7091084 2 SCREW, 1/4-20 x 3/8" Self-Tapping Was 90302
8 7014368 CONTROL, Throttle (8HP)

7015480 CONTROL, Throttle (RT5X)
9 7090858 9 SCREW, 5/16-18 x 1/2" Self-Tapping

10 7014682 CLIP, Cable
11 7091122 3 SCREW, 1/4-20 x 1/2" Self-Tapping Was 90539
12 7036062 PANEL (8HP)

7036062 PANEL (RT5X) Was 36176

13 TUBE, Handle Bar Support (Not Available) Was 38066
14 2 PLATE, Tap Nut (Not Available) Was 51462
15 7032292 BRACKET, Cable
16 7032291 SLIDE
17 * BRACKET (Not Available) Was 32290
18 7090222 NUT, 5/16-24 Hex Center-Lock
19 7090188 6 WASHER, 5/16 Flat
20 7010023 SPRING
21 7013872 STUD, Shift Was 14415
22 7012659 KNOB, 1.62" DIA 3/8-16
23 7040503 HANDLE, Clutch
24 7090240 SCREW, 5/16-24 x 1 1/4" Hex Head Cap (Grade 2)
25 7090187 WASHER, 5/16 Split Lock
26 7091511 NUT, 5/16-18 Hex Was 90196
27 7090820 2 NUT, 3/4-16 Hex Lock
28 7010935 WASHER, 3/4 Flat
29 LATCH (Not Available) Was 40509
30 7047854 BRACKET, Latch
31 7090289 NUT, 3/8-24 Hex Center-Lock
32 7036106 BRACKET, Handle
33 7014380 SPRING
34 7091588 4 BOLT, 3/8-16 x 3/4" Hex Flange Lock Was 90612
35 7090864 WASHER, 13/16 Flat

tionItem Qt

Note

Components" Illustration & Parts
List)

Footnotes:

* NOTE: This part may be available from DPNI 1-800-558-1848 (Todd Graff)

Manual No. 7006033LARGE FRAME REAR TINE TILLERS

SERIES 2

9

TP 400-5202-5-RT-N

Handle & Controls 8 HP, RT5X

Manual No. 7006033 LARGE FRAME REAR TINE TILLERS
TP 400-5202-5-RT-N

10

SERIES 2

Handle & Controls 8 HP, RT5X

p

y

Part No Descri

36 7090169 SCREW, 3/8-24 x 2 1/2" Hex Head Cap
37 7091809 COTTER-PIN, 5/32 x 1 1/4" Was 90654
38 7023801 GRIP, Handle Release (8HP) Was 11879
39 7012117 BUSHING, 3/8" (8HP)
40 7014840 RETAINER, Nut Locking
41 7014390 E-RING 1/4 ID (8HP)
42 7014455 SPRING (8HP)
43 7018582 ROD, Handle Release (8HP)
44 7015251 SPRING, Traction Cable
45 7018776 CABLE, Traction Control
46 7018777 CABLE, Tine Control
47 7015252 SPRING, Tine Cable
48 7091575 2 NUT, 5/16-18 Hex Lock Was 90184
49 7091830 2 SCREW, 5/16-18 x 3" Hex Head Cap Was 90553

tionItem Qt

Note

Footnotes:

* NOTE: This part may be available from DPNI 1-800-558-1848 (Todd Graff)

Manual No. 7006033LARGE FRAME REAR TINE TILLERS

SERIES 2

11

TP 400-5202-5-RT-N

Engine & Drive Parts

Manual No. 7006033 LARGE FRAME REAR TINE TILLERS
TP 400-5202-5-RT-N

12

SERIES 2

Engine & Drive Parts

p

y

Part No Descri

* ENGINE, 5 HP B&S Manual Start, Model #130902-1151-0 Not shown
* ENGINE, 5 HP Wisconsin Robin Manual Start, Model #WI-

1854-800427
* ENGINE, 8 HP B&S Manual Start, Model #190707-2170-01 Not shown

* ENGINE, 8 HP B&S Electric Start, Model #190702-2136-01 Not shown
1 7091601 5 NUT, 5/16-18 Hex Flange Lock Was 90585
2 7090700 4 BOLT, 5/16-18 x 1 1/2” Hex Flange Lock, Engine Mounting (8HP & 5HP)
3 7091819 3 SCREW, 1/4-20 x 5/8” Self-Tapping Was 90362
4 7014738 1 PULLEY, Drive
5 7014353 1 V-BELT (8 HP) 4L x 62.38” EL Kevlar

7014686 1 V-BELT (5 HP) 4L x 62.0” EL Kevlar

6 7010210 1 KEY, 1/4 x 2” (RT5 & 8HP)

7010783 1 KEY, Hi-Pro #505 (RT5X)

7 7018566 1 PLATE, Drive (RT5 & 8HP)

7018830 1 PLATE, Drive (RT5X)
8A 7090390 1 WASHER, 3/8 Internal Tooth Lock (5HP)
8B 7091301 1 WASHER, 7/18 Split Lock (8HP) Was 90247

9 7090835 1 SCREW, 3/8-24 x 1” Allen-Head Cap (5HP)

7090836 1 SCREW, 7/16-20 x 1” Allen-Head Cap (8HP)

tionItem Qt

Note

Not shown

Footnotes:

Note* Purchase engine parts from engine manufacturer dealer.

Manual No. 7006033LARGE FRAME REAR TINE TILLERS

SERIES 2

13

TP 400-5202-5-RT-N

Frame (5HP), Traction Drive

Manual No. 7006033 LARGE FRAME REAR TINE TILLERS
TP 400-5202-5-RT-N

14

SERIES 2

Frame (5HP), Traction Drive

p

y

Part No Descri

1 7049751 BAR, Stand-Up Was 49705
2 7035020 FRAME, Right Side
3 7091084 9 SCREW, 1/4-20 x 3/8" Self-Tapping Was 90302
4 ASSEMBLY, Idler Bracket (See "Idler Bracket Assembly"

5 7014208 PULLEY, V-Idler 2.62" OD
6 7090122 WASHER, 3/8" Flat
7 7090118 WASHER, 3/8 Split Lock
8 7091497 SCREW, 3/8-16 x 1 1/2" Hex Head Cap Was 90655

9 7075115 SEAL, Long Was 18570
10 7011037 4 CLAMP, 1-7/8"
11 7014673 WASHER, Thrust
12 7011071 2 WASHER, Thrust (Nylon)
13 7010989 BEARING, Axle Was 70295
14 7091575 2 NUT, 5/16-18 Hex Lock Was 90184
15 7090189 4 WASHER, 5/16 Internal/External Tooth Lock
16 7014658 CAP, Seal L.H. 3/4" Was 10967
17 7010838 GRIP
18 ASSEMBLY, Shift Quadrant (See "Shift Quadrant" Group)
19 7090187 6 WASHER, 5/16 Split Lock
20 7091841 2 SCREW, 5/16-18 x 1" Self-Tapping Was 90369
21 7091297 5 NUT, 5/16-24 Hex Was 90223
22 ROD (Not Available) Was 21873
23 * CLIP, Cable (Not Available) Was 32274
24 * CLIP, Control (Not Available) Was 32273
25 * SPACER, Tiller Head (Not Available) Was 32428
26 7013847 4 RETAINER, Bolt 3/8"
27 7014337 LINK, Short Shift
28 7051379 ASSEMBLY, Primary Chain Case (See "Primary Chain Case"

29 * SPRING (Not Available) Was 14371
30 * LEVER (Not Available) Was 32261
31 7038050 YOKE, Clutch
32 7038212 BRACE
33 7091601 2 NUT, 5/16-18 Hex Flange Lock Was 90585
34 7091609 5 SCREW, 5/16-18 x 1 1/2" Hex Flange Lock Was 90242
35 7011791 5 RETAINER, Bolt 5/16"
36 7035102 FRAME
37 7014979 2 STUD, Weight

tionItem Qt

Note

Group)

Illustration & Parts List)

Footnotes:

* NOTE: This part may be available from DPNI 1-800-558-1848 (Todd Graff)

Manual No. 7006033LARGE FRAME REAR TINE TILLERS

SERIES 2

15

TP 400-5202-5-RT-N

Frame (5HP), Traction Drive

Manual No. 7006033 LARGE FRAME REAR TINE TILLERS
TP 400-5202-5-RT-N

16

SERIES 2

Frame (5HP), Traction Drive

p

y

Part No Descri

38 7015159 BOLT, 5/16-24 x 3" Shoulder
39 7091640 4 BOLT, 3/8-16 x 1" Carriage Was 90747
40 7090858 16 SCREW, 5/16-18 x 1/2" Self-Tapping
41 7015238 BOOT
42 7014662 SEAL, Oil
43 7051377 ASSEMBLY, Left Frame Drive (RT5) (See "Frame Components (Left

* ASSEMBLY, Left Frame Drive (RT8 & 5X)(Not Available) Was 59670 (See "Frame

44 7040517 BELLCRANK, Shift
45 7023676 LINK, Shift 4.5" Was 14346 4.687" Not Available
46 WEIGHT (Not Available) Was 19739 (Approximately 60

47 7090500 WASHER, 7/16 Flat
48 7090839 2 NUT, 7/16-14 Hex Lock
49 7090324 4 SCREW, 3/8-16 x 1" Self-Tapping

tionItem Qt

Note

Side)" Group)

Components (Left Side)" Group)

pounds)

Footnotes:

* NOTE: This part may be available from DPNI 1-800-558-1848 (Todd Graff)

Manual No. 7006033LARGE FRAME REAR TINE TILLERS

SERIES 2

17

TP 400-5202-5-RT-N

Frame (8HP), Traction Drive

Manual No. 7006033 LARGE FRAME REAR TINE TILLERS
TP 400-5202-5-RT-N

18

SERIES 2

Frame (8HP), Traction Drive

p

y

Part No Descri

1 7049751 BAR, Stand-Up Was 49705

2 7035020 FRAME, Right Side

3 7091084 9 SCREW, 1/4-20 x 3/8" Self-Tapping Was 90302

4 7011035 2 BOLT, 5/16-24 x 1 5/8" Tapered

5 7040434 2 HUB, Wheel

6 7092062 2 NUT, 5/16-24 Special Hex Lock Was 11201

7 7010838 GRIP

8 7014658 CAP, Seal L.H. 3/4" Was 10967 (Now 14658 +

9 7090189 4 WASHER, 5/16 Internal/External Tooth Lock
10 ASSEMBLY, Shift Quadrant (See "Shift Quadrant" Group)
11 7091575 NUT, 5/16-18 Hex Lock Was 90184
12 7011037 4 CLAMP, 1-7/8"
13 7010989 BEARING, Axle Was 70295
14 7011071 WASHER, Thrust (Nylon)
15 7014673 WASHER, Thrust
16 7075115 SEAL, Long Was 18570
17 ASSEMBLY, Idler Bracket (See "Idler Bracket Assembly"

18 7014208 PULLEY, V-Idler 2.62" OD
19 7090122 WASHER, 3/8" Flat
20 7090118 WASHER, 3/8 Split Lock
21 7091497 SCREW, 3/8-16 x 1 1/2" Hex Head Cap Was 90655
22 7090700 4 BOLT, 5/16-18 x 1 1/2" Hex Head Cap (Engine Mounting)
23 7011791 RETAINER, Bolt 5/16"
24 7035102 FRAME
25 7091297 5 NUT, 5/16-24 Hex Was 90223
26 7091841 2 SCREW, 5/16-18 x 1" Self-Tapping Was 90369
27 * CLIP, Cable (Not Available) Was 32274
28 7090187 6 WASHER, 5/16 Split Lock
29 21873 ROD (Not Available) Was 21873
30 32273 * CLIP, Control (Not Available) Was 32273
31 7040490 CLEVIS PIN, 3/4 X 6-1/16, ZP (Hitch)
32 7011714 PIN, Hair
33 7051379 ASSEMBLY, Primary Chain Case (See "Primary Chain Case"

34 7014337 LINK, Short Shift
35 7038065 CLEVIS
36 * SPRING (Not Available) Was 14371

tionItem Qt

Note

14662 + 12332)

Group)

Illustration & Parts List)

Footnotes:

* NOTE: This part may be available from DPNI 1-800-558-1848 (Todd Graff)

Manual No. 7006033LARGE FRAME REAR TINE TILLERS

SERIES 2

19

TP 400-5202-5-RT-N

Frame (8HP), Traction Drive

Manual No. 7006033 LARGE FRAME REAR TINE TILLERS
TP 400-5202-5-RT-N

20

SERIES 2

Frame (8HP), Traction Drive

p

y

Part No Descri

37 7091601 NUT, 5/16-18 Hex Flange Lock Was 90585
38 32261 * LEVER (Not Available) Was 32261
39 7038050 YOKE, Clutch
40 7090858 16 SCREW, 5/16-18 x 1/2" Self-Tapping
41 7015238 BOOT
42 7014662 SEAL, Oil
43 7090324 8 SCREW, 3/8-16 x 1" Self-Tapping
44 * ASSEMBLY, Left Frame Drive (RT8 & 5X)(Not Available) Was 59670 (See "Frame

45 7038212 2 BRACE
46 7015159 BOLT, 5/16-24 x 3" Shoulder
47 7040517 BELLCRANK, Shift
48 7014979 2 STUD, Weight
49 7023676 LINK, Shift 4.5" Was 14346 4.687" Not Available
50 WEIGHT (Not Available) Was 19739 (Approximately 60

51 7090500 2 WASHER, 7/16 Flat
52 7090839 2 NUT, 7/16-14 Hex Lock

tionItem Qt

Note

Components (Left Side)" Group)

pounds)

Footnotes:

* NOTE: This part may be available from DPNI 1-800-558-1848 (Todd Graff)

Manual No. 7006033LARGE FRAME REAR TINE TILLERS

SERIES 2

21

TP 400-5202-5-RT-N

Frame Components (Left Side) (5 HP)

Manual No. 7006033 LARGE FRAME REAR TINE TILLERS
TP 400-5202-5-RT-N

22

SERIES 2

Frame Components (Left Side) (5 HP)

p

y

Part No Descri

7051377 1 * ASSEMBLY, Drive (5 HP Units)
1 7035021 1 FRAME, Left Side
2 7021870 1 SHAFT
3 7011071 3 WASHER, Thrust
4 7051378 1 ASSEMBLY, Cluster Gear (Includes items 5, 6, 7, & 8)
5 7018564 1 GEAR, 63 Tooth
6 7021868 1 GEAR, 16 Tooth
7 7021872 1 TUBE, Hex
8 7014369 1 BEARING, Hex
9 7018563 1 GASKET (Not Available) Was 18563

10 7090303 2 NUT, 1/4-28 Hex Top-Lock
11 7036038 1 COVER
12 7090819 1 NUT, 1/2-20 Hex Center-Lock
13 7075115 1 SEAL, Short Was 18569
14 1 RETAINER, Boot (Not Available) Was 32260
15 7090822 5 SCREW, #10-32 x 1/4” Self-Tapping
16 7011024 1 PLUG
17 7010988 1 WASHER, Plastic
18 7014331 1 SPACER
19 7014330 1 BEARING, Axle
20 7051365 1 ASSEMBLY, Tube Drive
21 7014673 1 WASHER, Thrust
22 7047852 1 STRUCTURE, Axle
23 7090099 2 SCREW, 1/4-28 x 1/2” Hex Head Cap, Grade 5
24 7091122 14 SCREW, 1/4-20 x 1/2” Self-Tapping Was 90539
25 1 SCREW, 1/2-20 x 1 7/8” Hex Head Cap (Not Available) Was 90821

tionItem Qt

Note

Footnotes:

* NOTE: Drive assembly will fit RT5X and 8 HP units but has faster shaft output.

Manual No. 7006033LARGE FRAME REAR TINE TILLERS

SERIES 2

23

TP 400-5202-5-RT-N

Frame Components (Left Side) (RT5X & RT8)

Manual No. 7006033 LARGE FRAME REAR TINE TILLERS
TP 400-5202-5-RT-N

24

SERIES 2

Frame Components (Left Side) (RT5X & RT8)

p

y

Part No Descri

1 * ASSEMBLY, Drive (RT5X & 8 HP Units) (Not Available) Was 59670
1 7035021 1 FRAME, Left Side
2 7022000 1 SHAFT, Hex Gear
3 7090949 2 WASHER, Thrust
4 7057400 1 ASSEMBLY, Gear Cluster (Includes items 5 & 6)
5 7057400 1 ASSEMBLY, Hex Gear (15 Tooth) Was 51649
6 7018761 1 GEAR (64 Tooth)
7 7018563 1 GASKET
8 7090303 2 NUT, 1/4-28 Hex Top-Lock
9 7036038 1 COVER

10 7090559 2 NUT, 1/2-20 Hex Center-Lock
11 7018569 1 SEAL, Short
12 7032260 1 RETAINER, Boot
13 7090822 5 SCREW, #10-32 x 1/4” Self-Tapping
14 7011024 1 PLUG
15 7010988 1 WASHER, Plastic
16 7051578 1 ASSEMBLY, Tube Drive
17 7014331 1 SPACER
18 7011071 1 WASHER, Thrust
19 7014330 1 BEARING, Axle
20 7014673 1 WASHER, Thrust
21 7047891 1 WELDMENT, Axle & Gear
22 7090099 2 SCREW, 1/4-28 x 1/2” Hex Head Cap, Grade 5
23 7091122 14 SCREW, 1/4-20 x 1/2” Self-Tapping Was 90539

tionItem Qt

Note

Footnotes:

* NOTE: If need component isn't available use 5 HP version but has faster shaft output.

Manual No. 7006033LARGE FRAME REAR TINE TILLERS

SERIES 2

25

TP 400-5202-5-RT-N

Primary Chain Case

Manual No. 7006033 LARGE FRAME REAR TINE TILLERS
TP 400-5202-5-RT-N

26

SERIES 2

Primary Chain Case

p

y

Part No Descri

7051379 ASSEMBLY, Primary Chain Case (Includes items 1 thru 17)
1 7039779 COVER (Left Hand)
2 7090913 10 SCREW, #10-24 x 1/2" Hex Washer Self-Tap (Torx) Was 90307
3 7028761 GASKET Was 18059
4 7010942 2 BEARING, Needle
5 7011086 2 WASHER, Thrust
6 7040355 HUB SPROCKET
7 7010756 2 BEARING, Ball
8 7010690 4 WASHER, Shim
9 7010940 SPROCKET - SHAFT

10 7010941 CHAIN #35
11 7047811 SPROCKET CASE (Right Hand)
12 7020908 ROLLER
13 7010776 RING, Retaining 1/2"
14 7010614 KEY, Woodruff
15 7011121 2 WASHER, Belleville .64 x 1.125 x .028
16 7020911 HUB
17 7090356 NUT, 5/16-18 Hex Center-Lock
18 7090731 3 BOLT, 5/16-18 x 1/2" Short Neck Carriage, Grade 5
19 7018782 DISC, Driven Was 10765
20 7091601 3 NUT, 5/16-18 Hex Flange Lock Was 90585
21 7011024 PLUG

tionItem Qt

Note

Footnotes:

Manual No. 7006033LARGE FRAME REAR TINE TILLERS

SERIES 2

27

TP 400-5202-5-RT-N

Shift Quadrant

Manual No. 7006033 LARGE FRAME REAR TINE TILLERS
TP 400-5202-5-RT-N

28

SERIES 2

Shift Quadrant

p

y

Part No Descri

ASSEMBLY, Shift Quadrant (Not Available) Was 57354
1 7047853 SHIFT QUADRANT, Structure
2 7040507 HANDLE, Shift
3 7031036 2 WASHER, Thrust
4 7010754 SPRING, Tension
5 7040508 ARM, Structure
6 7012758 LUBE FITTING, 90 Deg. 1/4-28
7 7011021 CLEVIS PIN, 1/4X1-1/4
8 7091597 COTTER-PIN, 3/32 x 3/4" Was 90037
9 7010838 GRIP, Shift Handle

tionItem Qt

Note

Footnotes:

Manual No. 7006033LARGE FRAME REAR TINE TILLERS

SERIES 2

29

TP 400-5202-5-RT-N

Idler Bracket Assembly

Manual No. 7006033 LARGE FRAME REAR TINE TILLERS
TP 400-5202-5-RT-N

30

SERIES 2

Idler Bracket Assembly

p

y

Part No Descri

ASSEMBLY, Idler Bracket (Not Available) Was 57376
1 BRACKET, Idler (Not Available) Was 47868
2 7014206 SPACER, .632 OD x .328 ID x .21 Long
3 7051464 ARM, Idler
4 7014666 WASHER, 11/32 Flat
5 7014340 IDLER, 2.5" Flat
6 7090187 WASHER, 5/16 Split Lock
7 7091297 NUT, 5/16-24 Hex Head Was 90223
8 7014454 GUIDE, Belt
9 7090118 WASHER, 3/8 Split Lock

10 7091630 NUT, 3/8-24 Hex Head Was 90155
11 7028725 SCREW, 5/16-24 x 2" Hex Head Cap, Grade 5 Was 90245

tionItem Qt

Note

Footnotes:

Manual No. 7006033LARGE FRAME REAR TINE TILLERS

SERIES 2

31

TP 400-5202-5-RT-N

Tiller Head

Manual No. 7006033 LARGE FRAME REAR TINE TILLERS
TP 400-5202-5-RT-N

32

SERIES 2

Tiller Head

p

y

Part No Descri

1 * SPACER Was 32263 (Used on 5HP Only)
2 BRACKET, Mounting Was 47866 (Used on 8HP Only)
32* STUD Was 14381
4 7090187 2 WASHER, 5/16 Split Lock
5 7091511 2 NUT, 5/16-18 Hex Was 90196
6* SHIELD Was 38068
7 7090358 8 SCREW, 5/16-24 x 2 1/2" Hex Head Cap (Gr.8)
8 7014334 10 SPACER, .625 OD x .388 ID x .801 Long
9 7090815 8 SCREW, 3/8-16 x 1/2" Self Tapping (8HP) Was 90506

10 7036058 BRACKET, Mtg. Left (8HP)

7036033 BRACKET, Mtg. Left (5HP)

11 7036057 BRACKET, Mtg. Right (8HP)

7036034 BRACKET, Mtg. Right (5HP)
12 7092062 8 NUT, 5/16-24 Hex Lock Was 11201
13 7090799 6 BOLT, 5/16-18 x 5/8" Short Neck Carriage
14 7035060 COVER, TINE
15 7035063 PLATE, Right Side
16 * MOULDING, Trim Was 14422
17 7090122 6 WASHER, 3/8" Flat
18 7090134 3 SCREW, 3/8-16 x 3/4" Hex Head Cap (Gr.2)
19 7091302 3 NUT, 3/8-16 Hex Was 90130
20 7036036 1 GUARD, Splash
21 7091619 2 NUT, 3/8-16 Flange Lock (5HP only) Was 90613
22 7013633 GRIP, Depth Bar
23 7047808 STRUCTURE, Depth Bar
24 7091601 16 NUT, 5/16-18 Hex Flange Lock Was 90585
25 7021866 SPACER, .5 OD x .33 ID x .4 Long
26 7051375 ASSEMBLY, Tiller Chain Case (See "Main Chain Case"

27 7090209 SCREW, 5/16-18 x 1" Hex Head Cap
28 7090289 2 NUT, 3/8-24 Hex Center Lock
29 7014586 2 BOLT, 3/8-24 x 2 1/4" Shear
30 ASSEMBLY, Tine 13" (8HP)(See Tine Assembly Group) Was 51513 and 60687

ASSEMBLY, Tine 11.5" (5HP)(See Tine Assembly Group) Was 51579 and 60749
31 7090188 3 WASHER, 5/16 Flat (3)
32 7091841 2 SCREW, 5/16-18 x 1" Self Tapping Was 90369
33 7014875 FINGER, Belt
34 7011714 PIN, Hair 2.25" (8HP)

tionItem Qt

Note

Illustration & Parts List)

Footnotes:

* NOTE: This part may be available from DPNI 1-800-558-1848 (Todd Graff)

Manual No. 7006033LARGE FRAME REAR TINE TILLERS

SERIES 2

33

TP 400-5202-5-RT-N

Tiller Head

Manual No. 7006033 LARGE FRAME REAR TINE TILLERS
TP 400-5202-5-RT-N

34

SERIES 2

Tiller Head

p

y

Part No Descri

35 7090222 NUT, 5/16-24 Hex Center Lock
36 7014340 IDLER, Flat 2.5" OD .375" ID
37 7032246 ARM, idler
38 7090861 BOLT, 5/16-18 x 1-3/4" Carriage (Gr.5)
39 7035062 PLATE, Left Side
40 7090731 10 BOLT, 5/16-18 x 1/2" Short Neck Carriage (Gr.5)
41 7014668 SPRING
42 7047856 COVER, Belt
43 7091575 2 NUT, 5/16-18 Hex Lock Was 90184
44 7014980 2 WASHER, Seal
45 7091537 NUT, 5/16-18 Lock Wing Was 90375
46 7011791 10 RETAINER, Bolt 5/16"
47 7014353 V-BELT, 4 L x 62.38" Effective Length
48 7090118 3 WASHER, 3/8 Split Lock
49 7040490 PIN, Clevis 3/4 x 6.062 (8HP)

tionItem Qt

Note

Footnotes:

* NOTE: This part may be available from DPNI 1-800-558-1848 (Todd Graff)

Manual No. 7006033LARGE FRAME REAR TINE TILLERS

SERIES 2

35

TP 400-5202-5-RT-N

Main Chain Case

Manual No. 7006033 LARGE FRAME REAR TINE TILLERS
TP 400-5202-5-RT-N

36

SERIES 2

Main Chain Case

p

y

Part No Descri

7051375 ASSEMBLY, Main Chain Case (Includes items 1 thru 24)

1 7051408 ASSEMBLY, Chain Case (Right Hand)

7051408 CASE, Right Hand Was 49714
7010756 BEARING, Ball
7011176 BEARING, Needle

7013681 2 SEAL One was 23775 double lip
2 7092062 NUT, 5/16-24 Hex Lock Was 11201
3 7090554 SCREW, 5/16-18 x 3/8" Self-Tapping
4 7032248 2 RETAINER, Depth Bar
5 7091575 9 NUT, 5/16-18 Hex Lock Was 90184
6 7014980 4 WASHER, Seal
7 7014677 2 STUD, Spacer 5/16 x 2.6
8 7019716 GASKET, Chain Case Housing
9 7050724 SPROCKET ASSM'Y., Intermediate (Includes following indented

7040437 SPROCKET

7011178 2 BEARING, Roller (Press fitted-flush)

10 7011181 SPACER
11 7040364 SHAFT, Tine Rotor
12 7014313 CHAIN, Drive (#50)
13 7091318 9 SCREW, 5/16-18 x 3/4" Hex Head Cap Was 90206
14 7091601 4 NUT, 5/16-18 Hex Flange Lock Was 90585
15 7038090 2 PLATE, Wear Guard
16 7090838 SCREW, 5/16-24 x 2 1/4" Hex Head Cap, Grade 5
17 ASSEMBLY, Chain Case (Left Side)(Not Available) Was 51363

* CASE, Left Hand (Not Available) Was 49701
7010756 BEARING, Ball
7011176 BEARING, Needle
7013681 2 SEAL

18 7021752 RACE, Sprocket Bearing
19 7014312 CHAIN, Drive (#35)
20 7010690 WASHER, Shim .625 x .812 x .016
21 7090858 11 SCREW, 5/16-18 x 1/2" Self-Tapping
22 7019102 ASSEMBLY, Drive Shaft Was 51786 (Includes items 23 &

23 7015017 RING, Tolerance .625
24 7019102 SHAFT, Drive
25 7010211 KEY, #9-3/16 x 3/4" Woodruff

tionItem Qt

Note

items)

24)

Footnotes:

* NOTE: This part may be available from DPNI 1-800-558-1848 (Todd Graff)

Manual No. 7006033LARGE FRAME REAR TINE TILLERS

SERIES 2

37

TP 400-5202-5-RT-N

Main Chain Case

Manual No. 7006033 LARGE FRAME REAR TINE TILLERS
TP 400-5202-5-RT-N

38

SERIES 2

Main Chain Case

p

y

Part No Descri

26 7090356 NUT, 5/18-18 Hex Center Lock
27 7011121 2 WASHER, Cone .64 x 1.25 x .028
28 7014311 PULLEY, 6" O.D.
29 7011024 PLUG

tionItem Qt

Note

Footnotes:

* NOTE: This part may be available from DPNI 1-800-558-1848 (Todd Graff)

Manual No. 7006033LARGE FRAME REAR TINE TILLERS

SERIES 2

39

TP 400-5202-5-RT-N

Tine Assembly

Manual No. 7006033 LARGE FRAME REAR TINE TILLERS
TP 400-5202-5-RT-N

40

SERIES 2

Tine Assembly

p

y

Part No Descri

7060687 KIT, Tine Assembly (8HP)(2 assemblies per kit) (Includes items 1 thru 5)

KIT, Tine Assembly (5HP)(Not Available, order individual parts) Was 60749 (Includes items 1

1 ASSEMBLY, RT8 (8HP)(Not Available)(Includes items 1 thru 5,

order individual parts)

ASSEMBLY, Tine (5HP)(Not Available)(Includes items 1 thru 5,

order individual parts)

2 7049723 STRUCTURE, Tine Hub
3 7075143 8 TINE, 13" (8HP) Was 32424

7075142 8 TINE, 11.5" (5HP) Was 38215

4 7014981 16 BOLT, 3/8-24 Hex Flange Head (Shoulder)
5 7090524 16 NUT, 3/8-24 Hex Lock Gr 8

tionItem Qt

Note

thru 5)
Was 51513

Was 51579

Footnotes:

Manual No. 7006033LARGE FRAME REAR TINE TILLERS

SERIES 2

41

TP 400-5202-5-RT-N

Electric Start Components

Manual No. 7006033 LARGE FRAME REAR TINE TILLERS
TP 400-5202-5-RT-N

42

SERIES 2

Electric Start Components

p

y

Part No Descri

1 7060782 * BATTERY, 12-Volt (Includes 1 thru 7) Was 60770
2 7038268 RETAINER, Battery
3 7090643 2 SCREW, 1/4-20 x 7/8" Hex Head Cap
4 7014303 NUT, 1/4-20 Tee
5 7091294 2 WASHER, 1/4 Flat Was 90055
6 7090372 NUT, 1/4-20 Hex Lock
7 7015550 WIRE, Negative 12" 8 AWG Black
8 7036107 BRACKET, Battery Mount

9 7090324 SCREW, 3/8-16 x 1" Self-Tapping
10 7090858 SCREW, 5/16-18 x 1/2" Self-Tapping
11 7012688 2 NUT, #10-24 Hex Lock
12 7090411 2 SCREW, #10-24 x 1/2" Hex Hd. Cap
13 HARNESS, Wiring (Not Available) Was 18654
14 7012080 TIE, Cable 7"
15 7011155 SWITCH, Electric Start (Includes items 16, 17 & two item 18)
16 7091546 WASHER, 5/8 Internal Tooth Lock Was 90880
17 7015438 NUT, 5/8-32 Hex
18 7011138 2 KEY, Switch (pr.)

tionItem Qt

Note

Footnotes:

* NOTE: (Includes acid pack & cable hardware - Battery cable mounting hardware that comes with battery is metric; when
ordering replacement hardware, order item numbers 11 & 12.)

Manual No. 7006033LARGE FRAME REAR TINE TILLERS

SERIES 2

43

TP 400-5202-5-RT-N

Decals

Manual No. 7006033 LARGE FRAME REAR TINE TILLERS
TP 400-5202-5-RT-N

44

SERIES 2

Decals

p

y

Part No Descri

* DECAL, Engine Ignition (Manual Start) (Was 14427, contact
DPNI)

1 7071916 DECAL, SNAPPER (14.56 x 2.75") Was 18586

7019295 DECAL, SNAPPER (11.5 x 2.25") Was 18593
2 7014426 DECAL, Throttle Control
3 7018592 DECAL, Tine Rotation Selection
4 7014428 DECAL, Handle Release
5 * DECAL, Engine Ignition (Manual Start) (Not Available) Was 14427
6 7014689 DECAL, Engine Ignition (Elec. Start)
7 7014439 DECAL, Wheel & Tine Control
8 7014429 DECAL, Tine Clutch
9 7014519 DECAL, Belt Rotation Instruction

10 7014425 DECAL, Safety instructions
11 DECAL, Model RT5X (Not Available) Was 18831
12 7014683 DECAL, Model RT5
13 7018591 DECAL, Operating Instructions
14 7014688 DECAL, Model RT8S
15 * DECAL, Model RT8 (Not Available) Was 14684

tionItem Qt

Note

Footnotes:

* NOTE: This part may be available from DPNI 1-800-558-1848 (Todd Graff)

Manual No. 7006033LARGE FRAME REAR TINE TILLERS

SERIES 2

45

TP 400-5202-5-RT-N

Garden Tool Kit (P/N 60559 Hauling Tray Kit)

Manual No. 7006033 LARGE FRAME REAR TINE TILLERS
TP 400-5202-5-RT-N

46

SERIES 2

Garden Tool Kit (P/N 60559 Hauling Tray Kit)

p

y

Part No Descri

KIT, Hauling Tray (Not Available) Was 60559
1 DUMP-HARROW (Not Available) Was 13652
2 * DRAW-BAR (Not Available) Was 13561
3 * BRACKET, Mounting (Not Available) Was 13654
4 GAGE-SHOE (Skid) (Not Available) Was 18608

7012867 PIN, Hair Not shown

PIN, Draw (Not Available) Was 13952, Not shown

7090254 4 WASHER, 1/2 Split Lock Not shown
7091316 5 NUT, 1/2-13 Hex Was 90258, Not shown
1921024 5 BOLT, 1/2-13 x 2" Round Head Carriage Was 90618, Not shown
7090118 4 WASHER, 3/8 Split Lock Not shown
7091302 4 NUT, 3/8-16 Hex Was 90130, Not shown
7090517 4 WASHER, 3/8 Plain Not shown
7091547 4 SCREW, 3/8-16 x 3/4" Pan Head Machine Was 13653, Not shown

tionItem Qt

Note

Footnotes:

* NOTE: This part may be available from DPNI 1-800-558-1848 (Todd Graff)

Manual No. 7006033LARGE FRAME REAR TINE TILLERS

SERIES 2

47

TP 400-5202-5-RT-N

Garden Tool Accessories (P/N 60730 Harrow Kit)

Manual No. 7006033 LARGE FRAME REAR TINE TILLERS
TP 400-5202-5-RT-N

48

SERIES 2

Garden Tool Accessories (P/N 60730 Harrow Kit)

p

y

Part No Descri

7060730 KIT, Wisbone Harrow
1 2 * TOOL BAR (Not Available) Was 31905
2 7047857 CLEVIS, Bracket
3 7032474 4 SHANK, Cultivator
4 7031904 4 CLAMP
5 7012244 4 SHOVEL, Double Point
6 7032473 * ADAPTER, Harrow (Not Available) Was 32473
7 7047858 DRAW-BAR
8 7038217 CLEVIS, Support
9 7040527 BRACKET, Mounting Use on Front Tine Tiller Only!

10 7013460 PIN, Clevis, 3/8 x 1 1/2" Use on Front Tine Tiller Only!
11 7013111 3 PIN, Clevis, 1/2 x 1"
12 7091596 4 PIN, Hair 2.62" Was 13844
13 1931352 4 BOLT, 3/8-16 x 1 1/2" Carriage Was 90497
14 7090122 8 WASHER, 3/8" Flat
15 7090390 4 WASHER, 3/8 Internal Tooth Lock
16 7091302 6 NUT, 3/8-16 Hex Was 90130
17 1921176 8 SETSCREW, 1/2-13 x 1 1/4" Square Head Was 90542
18 7090326 8 NUT, 1/2-13 Square
19 7090543 2 SCREW, 1/2-13 x 2" Hex Head Cap
20 7090254 2 WASHER, 1/2 Split Lock
21 7091316 2 NUT, 1/2-13 Hex Was 90258
22 7091540 2 SCREW, 5/16-18 x 1 1/2" Hex Head Cap Was 90211
23 7091511 2 NUT, 5/16-18 Hex Was 90196
24 7090187 2 WASHER, 5/16 Split Lock
25 7090188 4 WASHER, 5/16 Flat
26 7090134 2 SCREW, 3/8-16 x 3/4" Hex Head Cap
27 7090118 2 WASHER, 3/8 Split Lock

HILLER FURROWER UPDATE (Not Available) Was 60750, Consists of items 8,

tionItem Qt

Note

9, 10, 12, 16, 23, 26 and 27.

Footnotes:

* NOTE: This part may be available from DPNI 1-800-558-1848 (Todd Graff)

Manual No. 7006033LARGE FRAME REAR TINE TILLERS

SERIES 2

49

TP 400-5202-5-RT-N

Garden Tool Accessories (P/N 60731 Hiller Furrower Kit)

Manual No. 7006033 LARGE FRAME REAR TINE TILLERS
TP 400-5202-5-RT-N

50

SERIES 2

Garden Tool Accessories (P/N 60731 Hiller Furrower Kit)

p

y

Part No Descri

7060731 Hiller Furrower Kit
1 7047857 BRACKET, Clevis Included in Hiller/Furrower Kit

2 7047858 DRAW-BAR Included in Hiller/Furrower Kit

3 7047885 STANDARD Included in Hiller/Furrower Kit

4 7032430 SKID-SHOE Included in Hiller/Furrower Kit

5 7035072 HILLER - FORROWER Included in Hiller/Furrower Kit

6 7036135 WING, Hiller (Left Side) Included in Hiller/Furrower Kit

7 7036134 WING, Hiller (Right Side) Was 38134, Included in

8 7090779 BOLT, 1/2-13 x 3 1/2" Carriage, Grade 2
9 7090705 WASHER, 1/2' Flat

10 7091316 NUT, 1/2-13 Hex Was 90258
11 7090316 4 BOLT, 5/16-18 x 3/4" Carriage
12 7090188 8 WASHER, 5/16" Flat
13 7091537 4 WING-NUT, 5/16-18 Was 90492
14 7091596 3 PIN, .148 x 2 5/8" Hair Was 13844
15 7013111 3 PIN, 1/2 x 1" Clevis
16 7091540 2 BOLT, 5/16-18 x 1 1/2" Hex Head Was 90211
17 7091511 2 NUT, 5/16-18 Hex Was 90196
18 7090187 2 WASHER, 5/16 Split Lock
19 7040527 BRACKET, Mounting (Front Tine Tiller Only!)
20 7013460 PIN, 3/8 x 1 1/2" Clevis (Front Tine Tiller Only!)
21 7038217 CLEVIS, Support
22 7090134 2 SCREW, 3/8-16 x 3/4" Hex Head Cap
23 7090122 8 WASHER, 3/8" Flat
24 7090118 2 WASHER, 3/8 Split Lock
25 7091302 6 NUT, 3/8-16 Hex Was 90130

tionItem Qt

Note

(P/N 6-0628)

(P/N 6-0628)

(P/N 6-0628)

(P/N 6-0628)

(P/N 6-0628)

(P/N 6-0628)

Hiller/Furrower Kit (P/N 6-0628)

Footnotes:

Manual No. 7006033LARGE FRAME REAR TINE TILLERS

SERIES 2

51

TP 400-5202-5-RT-N

Parts Manual fo

r

LARGE FRAME REAR TINE TILLERS
SERIES 2

RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS

COPYRIGHT ©2006
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.

IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS

WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE

AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE

SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.

McDonough, GA, 30253 U.S.A.

Manual No. 7006033

Revision 5,

6/20/2006

TP 400-5202-5-RT-N