Parts Manual fo
r
20" STEEL DECK 5 HP PUSH & PROPELLED
WALK BEHIND MOWERS
SERIES 0
PUSH MODELS PROPELLED
MODELS
NR20500 NRP20500
R20500 RP20500
COPYRIGHT ©2005
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
Revision 1,
McDonough, GA, 30253 U.S.A.
9/22/2005
Manual No. 7006055
TP 400-5104-1-WB-N
s
PAGE GROUP
4
6
8
10
12
16
18
Handles & Controls (Push Models)
Handles & Controls (Self-Propelled Models)
Engine, Cutting Deck, Blade, Interlock (Push Models)
Engine, Cutting Deck, Blade, Interlock (Self-Propelled Models)
Wheels, Guards, Axle, Transmission
Side Chute, Adapter
Decals
Table Of Content
SERIES 0
Manual No. 700605520" STEEL DECK 5 HP PUSH & PROPELLED
3
TP 400-5104-1-WB-N
Handles & Controls (Push Models)
Manual No. 7006055 20" STEEL DECK 5 HP PUSH & PROPELLED
TP 400-5104-1-WB-N
4
SERIES 0
Handles & Controls (Push Models)
p
y
Part No Descri
1 7074384 1 HANDLE, Upper Was 33473
2 7036350 1 HANDLE, Middle
3 7046502 1 HANDLE, Lower (Left Hand) Was 38467
4 7035342 1 HANDLE, Lower (Right Hand) Was 38466
5 7017072 1 CONTROL, Blade
6 7033904 1 CLIP, Blade Control
7 7023765 1 CABLE, Blade Control
8 7014343 2 BUSHING
9 7023813 1 CLIP, Wiring Harness
10 7028481 1 CONTROL, Throttle
11 7090095 1 NUT, 1/4-28 Hex Was 91024
12 7090391 1 WASHER, 5/16 Internal Tooth Lock Was 91068
13 7023735 4 KNOB, 5/16-18 Thread
14 7091740 4 SCREW, 5/16-18 x 2" Curved Head Was 91189
15 7024211 1 DECAL, Blade Control
16 7090053 1 WASHER, 1/4 Internal Tooth Lock Was 91023
17 7090799 4 BOLT, 5/16-18 x 5/8" Short Neck Carriage Was 91026
18 7091601 4 NUT, 5/16-18 Hex Flange Lock Was 91070
19 7090112 1 SCREW, 1/4-28 x 2" Hex Head Cap
tionItem Qt
Note
Footnotes:
Manual No. 700605520" STEEL DECK 5 HP PUSH & PROPELLED
SERIES 0
5
TP 400-5104-1-WB-N
Handles & Controls (Self-Propelled Models)
Manual No. 7006055 20" STEEL DECK 5 HP PUSH & PROPELLED
TP 400-5104-1-WB-N
6
SERIES 0
Handles & Controls (Self-Propelled Models)
p
y
Part No Descri
1 7074384 1 HANDLE, Upper Was 34688
2 7024211 1 DECAL, Blade Control
3 7017072 1 CONTROL, Blade
4 7023792 1 PIN, .250 Dia. x 1 1/2"
5 7014307 1 GRIP, Wheel Drive
6 7041728 1 HANDLE, Wheel Drive
7 7014343 4 BUSHING
8 7033904 1 CLIP, Blade Control
9 7090112 2 SCREW, 1/4-28 x 2" Hex Head Cap, Grade 5
10 7091020 1 NUT, 1/4 Push
11 7029699 1 CONTROL, Throttle
12 7090053 2 WASHER, 1/4 Internal Tooth Lock Was 91023
13 7090095 2 NUT, 1/4-28 Hex Was 91024
14 7029631 1 CABLE, Wheel Drive
15 7016544 2 PLUG
16 7091601 1 NUT, 5/16-18 Hex Flange Lock Was 91070
17 7091190 3 SCREW, 5/16-18 x 1 1/2" Short Neck Curved Head
18 7029697 1 CABLE, Blade Control
19 7023813 3 CLIP, Wiring Harness
20 7029621 2 HANDLE, Middle
21 7091533 1 SCREW, 5/16-18 x 1 3/4" Short Neck Curved Head
22 7034620 1 BRACE, Handle/Bracket
23 7034330 1 BRACKET, Handle/Wheel (Right Hand)
24 7091542 12 SCREW, 5/16-18 x 1/2" Pan Head, Torx
25 7034361 1 BRACKET, Handle/Wheel (Left Hand)
26 7090951 3 NUT, 5/16-18 Large Flange Lock
27 7091673 1 WASHER, Flat, .125 x .252 I.D. x .625 O.D.
tionItem Qt
Note
Footnotes:
Manual No. 700605520" STEEL DECK 5 HP PUSH & PROPELLED
SERIES 0
7
TP 400-5104-1-WB-N
Engine, Cutting Deck, Blade, Interlock (Push Models)
Manual No. 7006055 20" STEEL DECK 5 HP PUSH & PROPELLED
TP 400-5104-1-WB-N
8
SERIES 0
Engine, Cutting Deck, Blade, Interlock (Push Models)
p
y
Part No Descri
1 -- *ENGINE, 5 HP Brigg's & Stratton XM, Model 12F802-0848-01
2 7026879 1 WIRE, Ground
3 7028430 1 RING, Engine Mount (For Push Models)
4 7091584 2 NUT, 1/4-20 Hex Flange Lock Was 91065
5 7090379 1 SCREW, #8-18 x 3/4" Hex Washer Head
6 7090385 1 WASHER, #8 Tab Internal Tooth Lock
7 7012048 1 INSULATOR
8 7034404 1 SPRING, Interlock, (Short) (Serial No's. 55609619 & Up)
7033408 1 SPRING, Interlock (Long) (Serial No's. 55600001 to
9 7011791 2 RETAINER, 5/16 Bolt
10 7091508 2 BOLT, 5/16-18 x 3/4" Short Neck Carriage, Grade 5 Was 90001
11 7090071 2 SCREW, 1/4-20 Hex Head Cap, Grade 5
12 7091088 3 SCREW, 3/8-16 x 2" Hex Washer Head, Self-Tapping
13 7053822 1 DECK, 20" Cutting (Includes items 14 & 15)
14 7024379 1 DECAL - WARNING
15 7013010 1 DECAL - DANGER (Keep Hands & Feet Away)
16 7034362 2 BRACKET, Front Wheels
17 7091542 12 SCREW, 5/16-18 x 1/2" Pan Head Torx, Self-Tapping
18 7090913 1 SCREW, #10-24 x 1/2" Hex Washer Self-Tap (Torx)
19 7034363 1 PLATE, Deck Front
20 7029659 1 DECAL, "Whipper" SNAPPER
21 7090167 1 SCREW, 3/8-24 x 2" Hex Head Cap, Grade 5
22 7012063 2 WASHER, Cone
23 7017167 1 BLADE, Mulching
24 7026189 1 HUB, Blade
25 7010783 1 KEY, #505 HI-PRO
26 7034418 1 BRACKET, Rear Wheel (Right Side Shown)
7034419 1 BRACKET, Rear Wheel (Left Side - Not Shown)
tionItem Qt
Note
55609618)
Footnotes:
Purchase Engine & Engine parts, other than those listed, from engine service outlets.
Manual No. 700605520" STEEL DECK 5 HP PUSH & PROPELLED
SERIES 0
9
TP 400-5104-1-WB-N
Engine, Cutting Deck, Blade, Interlock (Self-Propelled Models)
Manual No. 7006055 20" STEEL DECK 5 HP PUSH & PROPELLED
TP 400-5104-1-WB-N
10
SERIES 0
Engine, Cutting Deck, Blade, Interlock (Self-Propelled Models)
p
y
Part No Descri
1 -- ENGINE, 5 HP Brigg's & Stratton XM, Model 12F802-0848-01
2 7026879 1 WIRE, Ground
3 7029736 1 RING, Engine Mount (For Self-Propelled Model)
4 7091584 2 NUT, 1/4-20 Hex Flange Lock Was 90583
5 7090379 1 SCREW, #8-18 x 3/4" Hex Washer Head
6 7090385 1 WASHER, #8 Tab InternaI Tooth Lock
7 7012048 1 INSULATOR
8 7034404 1 SPRING, Interlock
9 7011791 3 RETAINER, 5/16 Bolt
10 7091508 3 BOLT, 5/16-18 x 3/4" Short Neck Carriage, Grade 5 Was 90001
11 7090071 2 SCREW, 1/4-20 Hex Head Cap, Grade 5
12 7091088 3 SCREW, 3/8-16 x 2" Hex Washer Head, Self-Tapping
13 7053821 1 DECK, 20" Cutting (Includes items 14 & 15)
14 7024379 1 DECAL - WARNING
15 7013010 1 DECAL - DANGER (Keep Hands & Feet Away)
16 7034362 2 BRACKET, Front Wheels
17 7091542 12 SCREW, 5/16-18 x 1/2" Pan Head Torx, Self-Tapping
18 7090913 4 SCREW, #10-24 x 1/2" Hex Washer Self-Tap (Torx)
19 7034363 1 PLATE, Deck Front
20 7029659 1 DECAL, "Whipper" SNAPPER
21 7090167 1 SCREW, 3/8-24 x 2" Hex Head Cap, Grade 5
22 7012063 1 WASHER, Cone
23 7017167 1 BLADE, Mulching
24 7026189 1 HUB, Blade
25 7010783 2 KEY, #505 HI-PRO
26 7021764 1 PULLEY, .88 x 2.12" O.D.
27 7090201 1 SCREW, 5/16-18 x 5/16" Hex Socket Set
tionItem Qt
Note
Footnotes:
*Purchase Engine & Engine parts, other than those listed, from engine service outlets.
Manual No. 700605520" STEEL DECK 5 HP PUSH & PROPELLED
SERIES 0
11
TP 400-5104-1-WB-N
Wheels, Guards, Axle, Transmission
Manual No. 7006055 20" STEEL DECK 5 HP PUSH & PROPELLED
TP 400-5104-1-WB-N
12
SERIES 0
Wheels, Guards, Axle, Transmission
p
y
Part No Descri
1 7029622 1 COVER, Belt
2 7090372 2 NUT, 1/4-20 Hex Cap Lock
3 7090071 2 SCREW, 1/4-20 x 1/2" H.H.C.
4 7028382 1 BELT, Drive
5 7029344 1 ASSEMBLY, Transmission
6 7028379 1 SPRING, Tension
7 7014341 4 RING, Retaining
8 7013320 4 BUSHING, Height Adjustment
9 7013307 1 SPRING, Front Axle
10 7090122 6 WASHER, 3/8" Flat
11A 7022259 2 WHEEL, Front, 7 x 1.75" (For Push Models)
11B 7053500 2 WHEEL, Front, 7 x 1.75" (For Self-Propelled Models)
12 7013024 4 HUB-CAP, Wheel
13 7017829 4 PLUG, Wheel
14 7034357 2 AXLE, Front & Rear, 375 x 19.60" Was 37946 (For Push Models);
7034357 1 AXLE, Front, 375 x 19.60" (For Self- Propelled Models)
15 7091193 4 PIN, 1/16 x 15/16" Hair
16 7028429 4 HUB-CAP, Wheel (Self-Propelled Models)
17A 7074629 2 WHEEL, Rear, 8 x 2.00" Was 53508 (For Self-Propelled
17B 7022260 2 WHEEL, Rear, 8 x 2.00" (For Push Models)
18 7091194 2 WASHER, 1/2 Flat
19 7073618 2 BUSHING, Rear Wheel Was 24541
20 7024573 2 SHIELD, Dust
21 7024549 1 GEAR, Pinion (Right Hand)
7024550 1 GEAR, Pinion (Left Hand)
22 7028572 1 ROD, Trail Shield (For Self-Propelled Models)
23 7024749 2 PAWL, 3/16
24 7026479 2 SEAL, Felt Pinion
25 7026478 2 RETAINER, Pinion Seal
26 7053684 1 ASSM'Y, Height Adjusting (Right Hand)
7053685 1 ASSM'Y, Height Adjusting (Left Hand)
27 7027702 2 GRIP, Height Adjuster
28 7091641 2 WASHER, Flat
29 7021001 2 NUT, Shoulder, 3/4-16 Hex Jam
30 7091601 2 NUT, 5/16-18 Hex Flange Lock Was 91070
31 7029859 1 GUARD, Rear Foot (For Self-Propelled Models)
32 7013027 2 SPRING, Rear Guard (For Push Models)
tionItem Qt
Note
(Shown)
Models)
Footnotes:
Manual No. 700605520" STEEL DECK 5 HP PUSH & PROPELLED
SERIES 0
13
TP 400-5104-1-WB-N
Wheels, Guards, Axle, Transmission
Manual No. 7006055 20" STEEL DECK 5 HP PUSH & PROPELLED
TP 400-5104-1-WB-N
14
SERIES 0
Wheels, Guards, Axle, Transmission
p
y
Part No Descri
33 7018444 1 GUARD, Rear Foot (For Push Models)
tionItem Qt
Note
Footnotes:
Manual No. 700605520" STEEL DECK 5 HP PUSH & PROPELLED
SERIES 0
15
TP 400-5104-1-WB-N
Side Chute, Adapter
Manual No. 7006055 20" STEEL DECK 5 HP PUSH & PROPELLED
TP 400-5104-1-WB-N
16
SERIES 0
Side Chute, Adapter
p
y
Part No Descri
1 7053680 1 ASSEMBLY, Side Chute/Adapter
2 7029700 2 KNOB, Fluted, 5/16-18 Thread
3 7091508 2 BOLT, 5/16-18 x 3/4" Short Neck Carriage, Grade 5 Was 90001 (3 used with item 5)
4 7029630 1 COVER, Recycling
5 7017169 1 COVER, Recycling Was 34679 (Push Models-
6 7091076 3 WASHER, 5/16 Flat
7 7024085 3 WING-NUT, 5/16-18 Nyloc
tionItem Qt
Note
Serial No's. 55600001 to
55609618)
Footnotes:
Manual No. 700605520" STEEL DECK 5 HP PUSH & PROPELLED
SERIES 0
17
TP 400-5104-1-WB-N
Decals
Manual No. 7006055 20" STEEL DECK 5 HP PUSH & PROPELLED
TP 400-5104-1-WB-N
18
SERIES 0
Decals
p
y
Part No Descri
1 7029659 1 DECAL, "WHIPPER" SNAPPER
2 7013312 1 DECAL, CAUTION (Discharge Opening)
3 7013010 1 DECAL, DANGER (Keep Hands & Feet Away)
4 7024379 1 DECAL, WARNING (Serial No. Blank)
5 7024211 1 DECAL, Blade Control
6 7029657 1 DECAL, SNAPPER 5HP Quantum XM
tionItem Qt
Note
Footnotes:
Manual No. 700605520" STEEL DECK 5 HP PUSH & PROPELLED
SERIES 0
19
TP 400-5104-1-WB-N
Parts Manual fo
r
20" STEEL DECK 5 HP PUSH & PROPELLED
WALK BEHIND MOWERS
SERIES 0
COPYRIGHT ©2005
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS
WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE
RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS
AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE
SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.
McDonough, GA, 30253 U.S.A.
Manual No. 7006055
Revision 1,
9/22/2005
TP 400-5104-1-WB-N
Loading...