SMSC EVB-USB5534-01 User Manual

EVB-USB5534-01 Evaluation Board User Manual

Copyright © 2013 SMSC or its subsidiaries. All rights reserved.
Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for

construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC
reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications
before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent
rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated
version of SMSC's standard Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement"). The product may contain design defects or errors
known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not
designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property
damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of
this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC’s website at http://www.smsc.com. SMSC is a registered
trademark of Standard Microsystems Corporation (“SMSC”). Product names and company names are the trademarks of their respective holders.

The Microchip name and logo, and the Microchip logo are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.

SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE, AND ANY AND ALL WARRANTIES ARISING FROM ANY COURSE
OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL
DAMAGES; OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON CONTRACT;
TORT; NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY REMEDY OF BUYER IS HELD
TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

SMSC EVB-USB5534-01 Revision 1.0 (06-19-13)

USER MANUAL

EVB-USB5534-01 Evaluation Board User Manual

Chapter 1 Overview

The EVB-USB5534-01 Revision E Evaluation Board is a demonstration and evaluation platform
featuring the SMSC USB5534B 4-port USB 3.0/2.0 hub on a 4-layer RoHS-compliant printed circuit
board. The USB5534B is fully compliant with the USB 3.0 USB Specification and supports SuperSpeed
(SS), Hi-Speed (HS), Full-Speed (FS), and Low-Speed (LS) USB signalling for complete coverage of
all defined USB operating speeds. All four of the downstream ports are USB 2.0 and USB 3.0
compliant. The EVB-USB5534-01 demonstrates driver compatibility with Microsoft Windows 8,
Windows 7, WinXP, Mac OS X 10.4+ and Linux Hub Drivers. The USB5534B is configured for
operation through internal default settings and supports custom configurations through SMBus or an
optional external 2-Mbit SPI Flash device, U7.

1.1 Features

 USB5534B in a 64-pin QFN RoHS compliant package
 USB 3.0 compliant (SS, HS, FS, and LS operation)
 USB pins are 5 V tolerant
 Self powered operation
 Four downstream USB 2.0/3.0 ports
 All downstream ports support individual port power and overcurrent sense
 Optional onboard SPI Flash for external downloadable firmware
 Low-cost 4-layer space saving design
 Operates from one single voltage (+12.0 V, regulated) external power supply
 Two GPIO LED indicators (LED0 and LED1)
 Single 25 MHz crystal or external clock input
 Single onboard +3.3 V, 0.5 Amp regulator
 Single onboard +1.25 V, 3 Amp regulator
 +3.3 V and port power LED indicators

Revision 1.0 (06-19-13) 2 SMSC EVB-USB5534-01

USER MANUAL

EVB-USB5534-01 Evaluation Board User Manual

Figure 1.1 Top and Bottom Level Silk Screen and Copper Layers

SMSC EVB-USB5534-01 3 Revision 1.0 (06-19-13)

USER MANUAL

EVB-USB5534-01 Evaluation Board User Manual

Chapter 2 Getting Started

The SMSC EVB-USB5534-01 is designed for flexible configuration solutions. It can be configured via
default internal register settings, downloadable external firmware to an onboard SPI Flash, or through
SMBus. When configured with the default internal register settings, the device operates as a USB

3.0/2.0 hub with four USB ports and SMSC’s standard VID/PID/DID settings.

2.1 Configuration Source - Internal Default

When the USB5534B does not detect a valid SPI Flash image or SMBus configuration upon power­up, the EVB-USB5534-01 uses internal default register settings. It also sets the Vendor ID, Product ID,
Language ID, and Device ID, and additional settings from internal ROM code.

2.2 Configuration Source - External SPI Flash and SMBus

Upon power-up, the USB5534B first looks for an external SPI Flash device and a valid signature in
the flash. If one is found, the external ROM is enabled and code execution is initiated from the external
SPI device. If an SPI Flash device is not found, the firmware checks if the SMBus is enabled. The
SMBus can operate in either legacy mode (USB 2.0 only) or advanced mode (access to both USB 2.0
and USB 3.0 registers).

By default, the SPI Flash (U7) is populated. The 10 k
populated to use external flash. R31 must be populated to select 60MHz SPI operation, rather than
30MHz operation. There is also an alternative SPI 8-pin DIP option available that is not populated by
default. To use a DIP SPI flash chip, remove U7 and solder down the flash chip or a DIP8 socket in
the SKT1 footprint (see Figure 2.1). The external flash can be programmed using the SMSC ProTouch
MPT software tool which can be download from the smsc.com E-Services portal.

 pull-up resistors R20 and R24 must also be

J8

U7

SKT1

Figure 2.1 Notable Component Locations

Revision 1.0 (06-19-13) 4 SMSC EVB-USB5534-01

USER MANUAL

SMBus data and clock can be controlled via the onboard SMBus header, J6. To enable SMBus, pins
1 and 2 must be shorted on the J8 SMBus Man. EN header, which pulls SM_CLK high. An Aardvark
tool will pull SM_CLK high when connected to the SMBus header, and J8 does not need to be shorted.
When SMBus is enabled, the USB5534B configures the GPIOs to act as an SMBus slave. As an
SMBus slave, the USB5534B will wait indefinitely for the SMBus configuration. If no external options
are detected, the it will be configured from the internal default registers.

Note: Refer to the Protouch MPT User Manual on using this software to program the configuration.

2.3 Power Source - Self-Powered

The EVB-USB5534-01 only supports self-powered operation, and is powered through one +12.0 V
regulated 'wall wart' external power supply. The +12.0 V ‘wall wart’ plugs into the 2.5 mm connector
J5 on the board. Alternatively, an external voltage can be injected onto the J7 Ext. 12 V header, which
is not populated by default. The +12.0 V feeds a 6 A regulator which outputs +5.0 V across the board.
This +5.0 V output controls the +3.3 V and +1.25 V onboard regulators.

2.4 Downstream Port Power Control

EVB-USB5534-01 Evaluation Board User Manual

All four USB downstream port powers are controlled via two 1 A port power devices (AP2176S). All
four downstream ports have individual overcurrent sensing available and all sensing signals are pulled
high to +3.3 V through external 10 k
through the PRT_CTL[4:1] signals on the USB5534B. The overcurrent sense signals from the port
power devices are monitored on the OCS[4:1] pins of the USB5534B.

2.5 Conclusion

The EVB-USB5534-01 provides the necessary requirements and interface options for evaluating the
USB5534B four port SuperSpeed USB hub controller. This will allow the user to gain a complete
understanding of the product, and accelerate the integration of the USB5534B into the user’s design.

 resistors. The port power devices, U2 and U4, are enabled

SMSC EVB-USB5534-01 5 Revision 1.0 (06-19-13)

USER MANUAL

EVB-USB5534-01 Evaluation Board User Manual

1

R4 330R4 330

Port 1

USB 3.0

Vbus1D-2D+3GND1

J1

A-REC

A-REC

THRUJ1USB 3.0

THRU

4

+

C10 100uF+C10 100uF

R1 330R1 330

C1 0.1uFC1 0.1uF

10

12

13

11

ShL2

ShL1

ShR2

ShR1

SSRX+6SSRX-5GND27SSTX+9SSTX-

8

SSTXM_C_DN1

SSTXP_C_DN1USB_SSTXP_DN1

Port 2

USB 3.0

Vbus1D-2D+3GND1

J2

A-REC

A-REC

THRUJ2USB 3.0

THRU

4

+

C11 100uF+C11 100uF

C4 0.1uFC4 0.1uF

10

12

13

11

ShL2

ShL1

ShR1

SSRX+6SSRX-5GND27SSTX+9SSTX-

8

SSTXM_C_DN2

SSTXP_C_DN2USB_SSTXP_DN2

ShR2

Port 3

USB 3.0

J3

A-REC

A-REC

Vbus1D-2D+3GND1

THRUJ3USB 3.0

THRU

4

+

C14 100uF+C14 100uF

Rev

Rev

Rev

E

E

E

of

of

of

23

23

23

SMSC - Austin

10900-B Stonelake Blvd.

Austin, TX 78759

512.502.0070

SMSC - Austin

10900-B Stonelake Blvd.

Austin, TX 78759

512.502.0070

SMSC - Austin

10900-B Stonelake Blvd.

Austin, TX 78759

512.502.0070

PWR4

PWR2

PWR3

PWR1

R7

330R7330

R1

R5

330R5330

C2 0.1uFC2 0.1uF

R2 330R2 330

12

10

13

11

ShL2

ShL1

ShR2

ShR1

SSRX+6SSRX-5GND27SSTX+9SSTX-

8

SSTXM_C_DN3

SSTXP_C_DN3

Port 4

USB 3.0

Vbus1D-2D+3GND1

J4

A-REC

A-REC

THRUJ4USB 3.0

THRU

4

+

C17 100uF+C17 100uF

C3 0.1uFC3 0.1uF

R3 330R3 330

12

10

13

11

ShL2

ShL1

ShR2

ShR1

SSRX+6SSRX-5GND27SSTX+9SSTX-

8

SSTXM_C_DN4

SSTXP_C_DN4USB_SSTXP_DN4

R2

R6

330R6330

R3

R8

330R8330

R4

C7

0.1uFC70.1uF

3V3

C5

0.1uFC50.1uF

C23

C23

0.1uF

0.1uF

C18

C18

0.1uF

0.1uF

"PPWR1"

LED1 GRNLED1 GRN

"PPWR2"

LED2 GRNLED2 GRN

"PPWR3"

LED3 GRNLED3 GRN

Optional

"PPWR4"

LED4 GRNLED4 GRN

R10

10K

R10

10K

R11

10K

R11

10K

R12

10K

R12

10K

R13

10K

R13

10K

1

Mountie

Mountie

Mountie

EVB-USB5534-01

EVB-USB5534-01

EVB-USB5534-01

Project

Name:

Project

Name:

Project

Name:

Evaluation Board for USB5534, QFN64

B

Friday, March 08, 2013

Evaluation Board for USB5534, QFN64

B

Friday, March 08, 2013

Evaluation Board for USB5534, QFN64

B

Friday, March 08, 2013

Title:

Size:

Part Number:

Date: Sheet

Title:

Size:

Part Number:

Date: Sheet

Title:

Size:

Part Number:

Date: Sheet

PWR1

2

3

4

VBUS_DET

R25 100KR25 100K

5

*Note that the SS signal pair Tx+/ are polarity

swapped on J0 for better routing.

C20 0.1uFC20 0.1uFC59 1.0nFC59 1.0nF

USB_SSRXM_DN1

USB_SSRXP_DN1

USBDN_DM1

USBDN_DP1

USB_SSTXM_DN1

6

7

1

2

4

USB2DP_DN1

USB2DM_DN1

USB3DP_RXDN1

USB3DM_RXDN1

Upstream

Upstream

USB2DM_UP

VBUS_DET/GPIO248USB2DP_UP

U1 USB5534B_QFN64

U1 USB5534B_QFN64

54

53

R22

100K

R22

100K

C58

4.7uF

C58

4.7uF

VBUS_UP

USB_DM_UP

USB_DP_UP

3

2

1

4

5

J0

J0

id

D-

D+

Vbus

USB 3.0

microAB

REC

smt &

th tabs

USB 3.0

microAB

REC

smt &

th tabs

R29 330R29 330

C63 0.1uFC63 0.1uF

The same is true for the SS pair Rx+/-.

PWR2

C19 0.1uFC19 0.1uF

3

USB3DP_TXDN1

USB3DM_TXDN1

USB3DM_TXUP

USB3DP_TXUP55USB3DM_RXUP

56

59

58

USB_SSTXP_UP

USB_SSTXM_UP

C52 0.1uFC52 0.1uF

C51 0.1uFC51 0.1uF

SSTXM_C_UP

SSTXP_C_UP

USB_SSRXM_UP

6

7

10

8

GND1

GND2

SSTX-

SSTX+

ShP1

ShL

ShP214ShP315ShP4

13

11

16

D D

USB_SSRXM_DN2

USBDN_DM2

USBDN_DP2

15

9

10

USB2DP_DN2

USB2DM_DN2

SMBUS

SMBUS

USB3DP_RXUP

SM_CLK/GPIO13

38

37

SM_CLK

SM_DAT

USB_SSRXP_UP

9

SSRX-

SSRX+

ShR

3V3

12

C12 0.1uFC12 0.1uF

C13 0.1uFC13 0.1uF

USB_SSTXM_DN2

USB_SSRXP_DN2

14

11

12

USB3DP_TXDN2

USB3DP_RXDN2

USB3DM_TXDN2

USB3DM_RXDN2

SM_DAT/GPIO12

*Note:

System should supply

RESETn in an embedded

hub implementation.

R27

100K

R27

100K

3V3

Manual

SMBus EN

J8

DNPJ8DNP

12

R35

10K

R35

10K

R23

10K

R23

10K

J6

J6

SMBus I/F

Reset

Reset

50

RESETn

SM_CLK

SM_DAT

(ss2/scl)

(ss3/sda)

(ss2/scl)

(ss3/sda)

1

3425678910

(gnd)

(gnd)

(nc/5V)

(nc/5V)

PWR3

USBDN_DM3

18

RESET

RESETn

VBUS_DET

(miso)

(sclk)

(miso)

(sclk)

(mosi)

(mosi)

(nc/5V)

(nc/5V)

USB_SSRXM_DN3

USBDN_DP3

23

17

USB2DP_DN3

USB2DM_DN3

Downstream

Downstream

Bias/Test

Bias/Test

RBIAS

64

49

RBIAS

TEST

C60

0.1uF

C60

0.1uF

R32

100K

R32

100K

(ss1)

(ss1)

Aardvark_I/F

Aardvark_I/F

(gnd)

(gnd)

C16 0.1uFC16 0.1uF

C15 0.1uFC15 0.1uF

USB_SSTXM_DN3

USB_SSTXP_DN3

USB_SSRXP_DN3

22

19

20

USB3DP_TXDN3

USB3DP_RXDN3

USB3DM_TXDN3

USB3DM_RXDN3

TEST

ATEST

60

R17

ZERO

R17

ZERO

ATEST

R21

10K

R21

10K

R16

12.0K1%R16

12.0K

1%

C C

PWR4

USBDN_DM4

25

USB2DM_DN4

Clock

Clock

XTALIN/CLK_IN

62

XTAL1

C31

C31

TP1TP1

USBDN_DP4

USB_SSRXM_DN4

30

24

USB2DP_DN4

13

Y1

25MHzY125MHz

6pF

6pF

C8 0.1uFC8 0.1uF

C9 0.1uFC9 0.1uF

USB_SSTXM_DN4

USB_SSRXP_DN4

29

26

27

USB3DP_TXDN4

USB3DP_RXDN4

USB3DM_TXDN4

USB3DM_RXDN4

XTALOUT

61

XTAL2

C36

6pF

C36

6pF

R31

R31

3V3

R20

R20

R24

R24

SPI Option

5

2

3

OUTA8OUTB

FLAGA

FLAGB

ENA

ENB4GND

U4 AP2176S_SO8

U4 AP2176S_SO8

1

C6

+

+

C26

C26

5V

Port Power Control

Port Power Control

SPI / I2C

SPI / I2C

SPI_CLK/GPIO4

SPI_DO/GPIO5/SPI_SPD_SEL

SPI_DI

SPI_CE

39

40

41

42

SPI_nCE

SPI_SCK

SPI_MOSI

SPI_MISO

10K

10K

10K

10K

10K

10K

nWP

6

2

1

3

5

SI

CS

SO

WP

SCK

VCC8GND

U7

U7

C55

0.1uF

C55

0.1uF

5

(1 A)

(1 A)

OUTA8OUTB

IN

ENA

ENB4GND

U2 AP2176S_SO8

U2 AP2176S_SO8

7

6

1

0.1uFC60.1uF

100uF

100uF

OCS1

PPWR1

PPWR3

PPWR4

PPWR2

32

33

35

36

46

PRT_CTL2/GPIO9

PRT_CTL1/GPIO8

PRT_CTL4/GPIO11

PRT_CTL3/GPIO10

TCK/LED1/GPIO1/OCS1

OCS / JTAG / UART

OCS / JTAG / UART

Power

Power

VDD125VDD128VDD1213VDD1221VDD1228VDD1231VDD1251VDD1257VDD3334VDD3352VDD33

VDD12

nHOLD

7

HOLD

SPI_FLASH-25X20_SO8

SPI_FLASH-25X20_SO8

4

B B

2

3

FLAGA

FLAGB

IN

7

6

C21

0.1uF

C21

0.1uF

LED0

OCS2

OCS3

OCS4

43

44

47

45

TDI/GPIO6/OCS3

TMS/GPIO3/OCS2

TDO/GPIO7/OCS4

TRST/GPIO0/LED0

(1 A)

(1 A)

R30

330

R30

330

65

GND(FLAG)

(Fill the GND FLAG with

at least 20 GND vias.)

(Fill the GND FLAG with

at least 20 GND vias.)

VDD33

16

63

VDD33

LED7

LED7

"LED1"

LED9

GRN DNP

LED9

GRN DNP

DNP

DNP

R28 330

R28 330

GRN

GRN

"LED0"

TP2TP2

C33

C33

1.0nF

1.0nF

LED1 Option

C22

C22

1.0nF

1.0nF

C38

C38

0.1uF

0.1uF

C48

C48

0.1uF

0.1uF

C49

C49

0.1uF

0.1uF

C41

C41

0.1uF

0.1uF

C37

C37

0.1uF

0.1uF

C29

C29

0.1uF

0.1uF

C28

C28

0.1uF

0.1uF

C27

C27

0.1uF

0.1uF

VDD12

C35

4.7uF

DNP

C35

4.7uF

DNP

C30

C30

1.0nF

1.0nF

C32

C32

1.0nF

1.0nF

C34

C34

0.1uF

0.1uF

C44

C44

0.1uF

0.1uF

C53

C53

0.1uF

0.1uF

C24

C24

0.1uF

0.1uF

VDD33

C25

4.7uF

DNP

C25

4.7uF

DNP

nHOLD

SPI_SCK

SPI_MOSI

3V3

678

5

SKT1

SKT1

123

4

SPI_MISO

SPI_nCE

nWP

Optional TH SPI Socket

A A

Socket

Socket

2

3

4

5

DIP8

DIP8

Figure 2.2 EVB-USB5534-01 Schematic Page 1

Revision 1.0 (06-19-13) 6 SMSC EVB-USB5534-01

USER MANUAL

R33

2671%R33

267

1%

3V3

3

4

1%

ADJ

OUT

R34 1601%R34 160

GND

8

GND

7

GND

1

Optional Alternate 3V3 Regulator

GND

VIN

EN

U8

MIC37102-ADJ_SOIC8

U8

MIC37102-ADJ_SOIC8

2

1

EN3

5V_REG_3V3

6
5

BOM Changes for MIC37102:

C_3V3-IN, 1.0 uF -> 4.7 uF

C_3V3-OUT, 4.7 uF -> 10 uF

R9

3V3

EVB-USB5534-01 Evaluation Board User Manual

Rev

Rev

Rev

E

E

E

of

of

of

33

33

33

SMSC - Austin

10900-B Stonelake Blvd.

Austin, TX 78759

512.502.0070

SMSC - Austin

10900-B Stonelake Blvd.

Austin, TX 78759

512.502.0070

SMSC - Austin

10900-B Stonelake Blvd.

Austin, TX 78759

512.502.0070

1

Mountie

Mountie

Mountie

EVB-USB5534-01

EVB-USB5534-01

EVB-USB5534-01

Project

Name:

Project

Name:

Project

Name:

Evaluation Board for USB5534, QFN64

B

Tuesday, February 12, 2013

Evaluation Board for USB5534, QFN64

B

Tuesday, February 12, 2013

Evaluation Board for USB5534, QFN64

B

Tuesday, February 12, 2013

Title:

Size:

Part Number:

Date: Sheet

Title:

Size:

Part Number:

Date: Sheet

Title:

Size:

Part Number:

Date: Sheet

"3V3 Present"

LED5

Red

LED5

Red

330R9330

MT2MT2

MT1MT1

TP3TP3

TP4TP4

3V3

TP5TP5

VDD12

2

TP6TP6

3

4

5

C62

C62

C61

C61

C56

C56

C54

C54

C45

C45

C46

C46

0.1uF

0.1uF

10uF

10uF

2671%R26

267

6_AmpU66_Amp

DNPJ7DNP

GND

1%

10uF

10uF

1.0nF

1.0nF

0.1uF

0.1uF

4.7uF

4.7uF

C_3V3-OUT

1.0nF

1.0nF

2

1.0uF

1.0uF

1.0uF

1.0uF

C_3V3-IN

25V

25V

VDD12

DNP

DNP

FB2

FB2

2A/0.05DCR

2A/0.05DCR

C39

0.1uF

C39

0.1uF

C40

10uF

C40

10uF

R14

29.4K1%R14

29.4K

1%

R15

1.91K1%R15

1.91K

1%

5

3

4

GND

TRIM

VOUT

3_AmpU33_Amp

VIN2ENABLE

U3

1

C43

0.1uFDNP

C43

0.1uFDNP

1V25 Regulator, 1A

EN12

R19

ZERO

R19

ZERO

C42

16V

C42

16V

10uF

10uF

5V_REG_1V2

FB3

FB3

2A/0.05DCR

2A/0.05DCR

2

3

4

5

VDD33

DNP

DNP

FB1

FB1

2A/0.05DCR

2A/0.05DCR

5

1

NR

OUT

D1 MMBD914D1 MMBD914

IN

SHDn

U5

PQ1LA335MSPQ

U5

PQ1LA335MSPQ

3

4

EN3

3V3 Regulator, 500 mA

R18

47K

R18

47K

5V_REG_3V3

FB4

FB4

2A/0.05DCR

2A/0.05DCR

5V 3V3

C47

C47

C50

C50

R26

5

4

3

GND

TRIM

VOUT

VIN2ENABLE

U6

1

5V Regulator, <6A

C57

C57

12V_EXT

Ext. 12V

J7

12

123

J5

2.5 mmJ52.5 mm

Note:

Jumper selections marked with

an asterisk (*) are default settings.

D D

C C

B B

A A

Figure 2.3 EVB-USB5534-01 Schematic Page 2

SMSC EVB-USB5534-01 7 Revision 1.0 (06-19-13)

USER MANUAL

EVB-USB5534-01 Evaluation Board User Manual

p

_

Supplied by SMSC

QFN64

Cut from long header

Place at each Board

corner on the bottom

side

W25X20BVSNIG

ort, QFN64 SMSC USB5534B

Capacitor, 0.1uF, 10V, 10%, X5R, 0402 Murata GRM155R71A104KA01D

Capacitor, 1000pF, 50V, 10%, X7R, 0402 Murata GRM155R71H102KA01D

Lumex SSF-LXH103GD

Resistor, 10K, 5%, 1/16W, 0603 Panasonic ERJ-3GEYJ103V

Resistor, 330, 5%, 1/16W, 0603 Panasonic ERJ-3GEYJ331V

Bumper Specialties RBS-6

IC, '25x20, 2Mb (256K x 8) SPI Serial FLASH, 2.5V-3.3V, 75MHz, Dual Read, SO8 Winbond

Reference Designator(s) Description Manufacturer Manufacturer Part Number Notes

U1 IC, USB5534B, USB 2.0 and 3.0 Hub, 4-

C12,

C13,C15,C16,C18,C19,C20,C2

1,C23,

C24,C27,C28,C29,C34,C37,C3

8,C39,

C41,C44,C47,C48,C49,C51,C5

2,C53, C55,C60,C61,C63

2

Pop'd

11 1

2 38 38 C1,C2,C3,C4,C5,C6,C7,C8,C9,

Item Qty Qty

Figure 2.4 EVB-USB5534-01 Bill of Materials

3 5 5 C10,C11,C14,C17,C26 Capacitor, Low ESR, 100uF, 6.3VDC, 20%, Aluminum, Radial-SMT, 5mm x 5.8mm United Chemi-Con EMZA6R3ADA101ME61G

4 7 7 C22,C30,C32,C33,C54,C59,C6

5 2 2 C31,C36 Capacitor, 6pF, 50V, +/-0.5pF, NPO, 0402 Murata GRM1555C1H6R0DZ01D

6 2 2 C40,C50 Capacitor, 10uF, 6.3VDC, 20%, X5R, 0603 Murata GRM188R60J106ME47D

7 1 1 C42 Capacitor, 10uF, 16VDC, 10%, 0805 Murata GRM21BR61C106KE15L

8 2 2 C45,C46 Capacitor, 1.0uF, 16VDC, 10%, X5R, 0603 Murata GRM188R61C105KA93D

9 2 2 C56,C58 Capacitor, 4.7uF, 6.3VDC, 20%, X5R, 0603 Murata GRM188R60J475KE19D

10 1 1 C57 Capacitor, 10uF, 25 VDC, 10%, 0805 Murata GRM21BR61E106KA73L

11 1 1 D1 Diode, MMBD914LT, Fast Switching, 100VDC, 200mA, SOT-23 On Semiconductors MMBD914LT1

12 2 2 FB3,FB4 Ferrite Bead, 220 Ohm, 2A, 0.05DCR, 0603 Murata BLM18EG221SN1D

13 1 1 J0 Receptacle, USB 3.0, Style MicroB, Right Angle, SMT, TH Tabs Kycon KMMX-B10-SMT1SB30TR

14 4 4 J1,J2,J3,J4 Receptacle, USB 3.0, Style A, Right Angle, Through-hole Amphenol GSB311131HR

15 1 1 J5 Connector, Power Jack, 2.5 mm x 5.5 mm, 12 V, 4 A, Right Angle, TH Cui Stack PJ-002BH

16 1 1 J6 Header, 2 x 5, 0.1 Inch, Vertical AMP 146256-5

17 5 5 LED1,LED2,LED3,LED4,LED7 LED, Green, 3mm, Diffused, 0.2" CL-vert, TH, Right Angle

3,R24, R31,R35

R29, R30

21 1 1 R14 Resistor, 29.4K, 1%, 1/10W, 0603 Panasonic ERJ-3EKF2942V

22 1 1 R15 Resistor, 1.91K, 1%, 1/10W, 0603 Stackpole Electronics RMCF0603FT1K91

23 1 1 R16 Resistor, 12.0K, 1%, 1/16W, 0603 Panasonic ERJ-3EKF1202V

24 2 2 R17,R19 Resistor, ZERO, 0.1W, 0603 Panasonic ERJ-3GEY0R00V

20 10 10 R10,R11,R12,R13,R20,R21,R2

18 1 1 LED5 LED, Red, 3mm, Diffused, 0.2" CL-vert, TH, Right Angle Lumex SSF-LXH103ID

19 11 11 R1,R2,R3,R4,R5,R6,R7,R8,R9,

25 1 1 R18 Resistor, 47K, 5%, 1/16W, 0603 Yageo America 9C06031A4702JLHFT

26 4 4 R22,R25,R27,R32 Resistor, 100K, 5%, 1/16W, 0603 Panasonic ERJ-3GEYJ104V

27 1 1 R26 Resistor, 267, 1%, 1/10W, 0603 Panasonic ERJ-3EKF2670V

28 2 2 U2,U4 IC, Power Distribution Switch, Dual, 1 A continuous, SO-8 Diodes Inc. AP2176SG-13

29 1 1 U3 IC, DC-DC Converter Module, 0.591-6 Vout, ~12 Vin, 0.591-6 VDC out, 3A, 5 pin SIP, 0.41" Wide Murata OKR-T/3-W12-C

30 1 1 U5 IC, PQ1LA335MSPQ, Voltage Regulator, 3.3V, 500mA, Low Dropout, SOT-89-5 Sharp PQ1LA335MSPQ

-none Foot, Silicone Rubber, Adhesive, Clear, Cylindrical, .500"x.250"

31 1 1 U6 IC, DC-DC Converter Module, 0.591-6 Vout, ~12 Vin, 0.591-6 VDC out, 6A, 5 pin SIP, 0.41" Wide Murata OKR-T/6-W12-C

32 1 1 U7

33 1 1 Y1 Crystal, 25.000MHz, 30ppm, 6pF, SMT 2.0MM X 1.6MM Murata XRCGB25M000F3M00R0

34 4 4

Revision 1.0 (06-19-13) 8 SMSC EVB-USB5534-01

USER MANUAL

EVB-USB5534-01 Evaluation Board User Manual

Chapter 3 User Manual Revision History

Table 3.1 Revision History

REVISION LEVEL & DATE SECTION/FIGURE/ENTRY CORRECTION

Rev. 1.0 (06-19-13) Document Release

SMSC EVB-USB5534-01 9 Revision 1.0 (06-19-13)

USER MANUAL