Smooth fitness Snc-ii User Manual

OWNER’S

MANUAL

CAUTION: WEIGHT ON THIS PRODUCT SHOULD NOT EXCEED 136KG / 300LBS

The Product May Vary Slightly From The

Picture Shown Above

MADE IN CHINA

Thank you for choosing the Sit N Cycle. We take great pride in producing this

quality product and hope it will provide many hours of quality exercise to make you
feel better, look better and enjoy life to its fullest.

The Sit N Cycle is not a typical exercise bike; it is designed to be a low resistance
long duration exercise product. This is great for the office or the home, and for use
during activities where an individual would sit for long periods of time.

VER-140226

+

2

Seat Cushion Disclosure

ALL NEW MATERIALS

Consisting of

100% Polyurethane

Date of Manufacture 02/15/14

Model # SNC‐II

Lot # 140213

3

“SAFETY INSTRUCTION”

WARNING: To reduce the risk of serious injury, read the following safety instructions before using the
item

1. Read all warnings posted on the equipment.

2. Read this Owner's Manual and follow it carefully before using the equipment. Make sure that it is properly
assembled and tightened before use.

3. Keep children and pets away from the equipment. Do not allow children and pets to use or play on the
equipment .Always keep children and pets away from the equipment when it is in use.

4. Set up and operate the equipment on a solid level surface. Do not position the equipment on loose rugs or
uneven surfaces.

5. Inspect the equipment for worn or loose components prior to each use.

6. Tighten / replace any loose or worn components prior to using the equipment.

7. Follow your physician's recommendations in developing your own personal fitness program.

8. Always choose the workout which best fits your physical, strength and flexibility level. Know your limits and
train within them. Always use common sense when exercising.

9. Do not wear loose or dangling clothing while using the equipment.

10. Never exercise in bare feet or socks; always wear correct footwear, such as running, walking, or
cross-training shoes.

11. Be careful to maintain your balance while getting on this product, using this product and getting off this
product; loss of balance may result in a fall and/ or serious bodily injury.

12. The equipment should not be used by persons weighing over 300 pounds /136 kgs.

13. The equipment should be used by only one person at a time.

14. The equipment is for home usage only.

15. Maintenance: Replace the defective components immediately and / or discontinue the use of the equipment
until it is repaired.

16. Make sure that adequate space is available for access to and passage around the equipment; keep at least a
distance of 1 meter from any obstruction object while using the machine.

17. If you feel faint or dizzy, discontinue use of this equipment immediately. Serious bodily injury can occur if

this equipment is not assembled and used correctly. Serious bodily injury can also occur if all instructions
are not followed.

18. Keep children and pets away from equipment when in use. Always make sure all bolts and nuts are
tightened prior to each use. Follow all safety instructions in this manual.

WARNING: Before starting any exercise or conditioning program you should consult with your personal physician to see if you require a

complete physical exam. This is especially important if you are over the age of 35, have never exercised before, are pregnant, or suffer from
any illness

READ AND FOLLOW THE SAFETY PRECAUTIONS. FAILURE TO FOLLOWTHESE

INSTRUCTIONS CAN RESULT IN SERIOUS BODILY INJURY

4

Thank you for choosing the Sit N Cycle. We take

great pride in producing this quality product and hope
it will provide many hours of quality exercise to make
you feel better, look better and enjoy life to its fullest.

The Sit N Cycle is not a typical exercise bike; it is
designed to be a low resistance long duration exercise
product. This is great for the office or the home for use
during activities where an individual would sit for long
periods of time.

Too often, our busy lifestyles limit our time and
opportunity to exercise. The equipment provides a
convenient and simple way to get your body in shape
and achieve a happier and healthier lifestyle.

Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled. Read this manual carefully before using the
equipment.

Seat Cushion (1)

Seat Post (2)

Pedal (29L) (30R)

L

R

Base Frame Cover

Bottom(14)

Rear Support Frame

(12)(13)(14)

Main Frame Assembly (4)

Base frame Cover Top(12)

Transportation Handle(5)

Foot Pads(15)

“ASSEMBLY PARTS”

Unpack the box in a clear area. Follow the List of Assembly Parts below to check and make sure all of the assembly
parts are present and in good condition. Do not dispose of the packing material until the trial period has expired.The tools
needed for assembly have been included. If anything is missing please check the packing materials to verify it was not
concealed in this material.

5

“HARDWARE IDENTIFICATION CHART”

Note:

Please review the contents of the hardware kit pictured below.
Some small parts may have been pre-attached for shipping. If a part is not in the hardware bag, check to see if it has been
pre-assembled. You can refer to the exploded diagram on page 13 for hardware placement

HARDWARE KIT

Part No. and Description

Q’TY

#16 Bolt (M10x13mm)

4 pcs

#34 Screw (M4x12mm)

4 pcs

#33 Screw(M5X15mm)

6 pcs

#35 Screw(M5x30mm)

2 pcs

#3 Bolt (M8x13mm)

5 pcs

Wrench

ALLEN WRENCH (8 mm)

ALLEN WRENCH (6 mm)

Unpack the box in a clear area. Review the Hardware Kit List below. This chart is provided to help identify the hardware
used in the assembly process. Place the washers, the ends of the bolts, or screws on the circles to check for the correct
diameter. Use the small ruler to check the length of the bolts and screws. Do not dispose of the packing material until the
trial period has expired

NOTICE:The length of all bolts and screws, except those with flat heads, are

measured from below the head to the end of the bolt or screw. Flat head
bolts and screws are measured from the top of the head to the end of the
bolt or screw

THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY: