CNC-622 BED MILL SPECIFICATIONS
Dimension Inch Metric
General Specifications
Length 30.70" 780 mm
Width 31.49" 800 mm
Height 36.60" 930 mm
Machine Weight 375 lbs 170 kg
Footprint 36" x 24” 914.40 x 609.60mm
Shipping Dimensions 39.37” x 40.94” x 40.94” 1000 x 1040 x 1040mm
Shipping Weight 1420 lbs 205 kg
Maximum Work Capacities
-Drilling mild steel Max dia 0.984” 25 mm
-End Mill Capacity 0.630” 16 mm
-Face Mill Capacity 1.969” 230 mm
Specifications
Table Size 21.65” x 6.30” 550 x 160 mm
Work Cube 12” x 6.5” x 11.8” 300 x 165 x 300 mm
Maximum Weight on Table 33 lbs 15 kg
T-Slot Size 7/16" 12 mm
Slots on Table, Qty. 3 3
Table Travel X Axis 12" 300 mm
Saddle Travel Y Axis 6.5" 165 mm
Head Travel Z Axis 11.8" 300 mm
Castings Cast Iron Cast Iron
Table Surface Precision Ground Precision Ground
Ways (X, Y Axis) Dovetail Dovetail
Ways (Z Axis) Linear Bearings Linear Bearings
Spindle
Motor HP Rating 1.33 HP 1000 W
Maximum Torque 18.68 in-lb 5.5 Nm
Drive System Geared Belt Geared Belt
Minimum Speed 100 RPM 100 RPM
Maximum Speed 3500 RPM 3500 RPM
Positioning Accuracy + or - 0.0004" + or - 0.01 mm
Repeatability 0.00025" 0.00635 mm
Quill Diameter 2.76" 70 mm
Spindle to Column 7.75" 198.86 mm
Spindle Taper R-8 10:1 Taper 10:1 Taper
Axes
Stepper Motors
X & Y Axis 566 in-oz 4 N-m
Z-Axis 850 in-oz 6 N-m
Ball Screws Pre-loaded Pre-loaded
Hardened & Ground Hardened & Ground
Ball Screw Size (X Axis) 0.78" x 25.39” 20 mm x 645 mm
Ball Screw Size (Y Axis) 0.55" x 13.23” 14 mm x 336 mm
Ball Screw Size (Z Axis) 0.78" x 18.82” 20 mm x 478 mm
Ball Screw Pitch 0.157" 4 mm
Ball Screw Precision P5 P5
Electrical
Power Requirement 110 VAC 60 Hz 110 VAC 60 Hz
Stand Specifications
Stand Footprint 25.20" x 36.50" 640 x 927 mm
Stand Dimensions 20” x 32” x 33” 508 x 812.8 x 838 mm
Stand Weight 75 lbs 34.02 kg
Stand Shipping Weight 80 lbs 36.29 kg
Floor Space Required 26" x 14” x 65” 660 x 355.60x1651 mm
Loading...