AM-1132HM
High Precision, Small VMC
Designed and built for high precision production:
• 8,000 RPM Precision Balanced Spindle
• Heavy castings provide serious damping – 4,400 lbs
• High Precision with Repeatability of 0.00015”
• Built for rapid chip removal and coolant flow
AM-1132H – Features
• Siemens 808D CNC Control – Respected, industry standard CNC
Control
• Closed Loop Control – System monitors motor position/velocity and
makes changes as necessary (more accurate, smoother surface finish)
+
• Servos on all Axes (Siemens) – Smoother, quieter, faster axis
movement
• 4 Tool Change System Standard– Standard tool change system
works for up to four tools.
• 600 IPM Rapids – Faster speeds equals higher production rates. Five
times faster than comparable machines
• Standard Three Axis Control – Optional 4th and 5th Axis Available
• 5 HP Servo Spindle Drive – Plenty of power to match the machine's
capacity
• 60-8000 RPM range on spindle – Single range, constant torque
variable drive. Easy to select the correct speed for the material and
tooling being used
• BT30 Spindle – Industry standard CNC tool holding system
• Heavy Castings with Cast Stand – High weight to work cube ratio,
more rigid/accurate
• Linear Ways on X,Y,Z – Faster, smoother interpolation (less stick
slip)
• Three-Fourths Enclosure – Full Surround enclosure contains fluid,
chips and flying debris
• Automatic Lubrication System – Well maintained machines have a
longer service life, and run smoother
• Programmable Coolant System – Control coolant with standard M-
Codes
• Work Light & Alarm Light – Operator can see when machining cycle
has finished or machine errors out from across the floor.
Siemens Drives and Motors:
On both X, Y and Z axes
8,000 RPM Spindle–Three Tool Change System:
Whisper quiet precision spindle with ability
to swap three tools.
Siemens 808D Control:
Industry respected control with highly
accurate servos and closed loop system
Control Enclosure:
Simple, logical layout - Easy access.
Efficient Coolant Flow:
Coolant and chips flow of both sides of work
table and down to dual chip trays and coolant tanks
Dual Chip Trays:
Front mounted dual chip trays
allow for quick chip waste disposal.
Automatic Lubrication and Pneumatic:
Enclosure keeps things clean and organized.
Dual Coolant Tanks:
Rapid recycling of coolant
keeps coolant where you need it.
AM-1132HM Mill Specifications
Table Inch Metric
Length 32” 800mm
Width 11” 260mm
T-Slot Width 5/8” 16mm
T-Slot Center Distance 2.4” 63mm
Max weight 330 lb 150 Kg
Travels Inch Metric
X Axis 16.25” 410mm
Y Axis 1.25” 260mm
Z Axis 16.25” 410mm
Spindle Nose to Table 2.5”-17.5’ 60-430mm
Spindle Inch Metric
Power 5 HP 3.7 Kw
RPM 60-8000 60-8000
Spindle Taper BT30 BT30
Drive System Belt Drive Belt Drive
Axis Motors Inch Metric
X/Y Power 2 HP 1.5 Kw
Z Power 2 HP 1.5 Kw
Rapids on X/Y 475”/min 12m/min
Rapids on Z 475”/min 12m/min
Max Cutting Speed 0-40”/min 0-1000mm/min
Accuracy Inch Metric
Positional Accuracy 0.0002 0.008mm
Repeatability Accuracy 0.000 0.005mm
Tool Changer Inch Metric
Type Gang Gang
Capacity 4 4
Max Tool Weight 15 lb. 6 Kg
Speed (chip to chip) or Tool
General Inch Metric
Machine Weight 4400 lb. 2000 Kg
Machine Dimensions 71”L X 65”W X 79”H 1800L X 1650W X 2000H
Shipping Weight 4600 lb. 2100 Kg
Crate Dimensions 79” X 69” X 79”H 1900L X 1750W X H2000H
Air Requirements 0.6MPa
Coolant Capacity
Power Requirements 220V60Hz – 3 Phase 220V60Hz – 3 Phase
AM-1132HM CNC MILL
-----------------PRICING-----------------
AM-1132HM Heavy Duty Bed Mill $24,899.00
Optional Accessories for AM-1032VMC
• 4th and 5th Axis Siemens Software Upgrade $3,000.00
• 125mm Rotary Table $2,879.00
ONLINE PURCHASING CURRENTLY NOT AVALIABLE FOR AUTOMATE CNC MACHINES.
FOR QUESTIONS OR TO PLACE AN ORDER PLEASE CALL AN ASSOCIATE AT 800.476.4849
Loading...