smithy AM-1032VMC User Manual

AM-1032VMC

Small Vertical Machining Center

Brand New! CNC vertical machining center with full size features in a compact package. Perfect for production,

prototyping, training, 2nd Operations, or situations where floor space is at a premium and another spindle is a necessity.

Comes standard with full-blown Siemens controlled, closed loop servo system.

AutoMate CNC – Features:

• Siemens 808D CNC Control – Respected, industry standard CNC Control

• Closed Loop Control – System monitors motor position/velocity and makes changes as necessary (more

accurate, smoother surface finish) +

• Siemens Servos on all Axes – Smoother, quieter, faster axis movement

• Optional 12 Tool Automatic Tool Change – Optional 12 Tool ATC available. Have the right tools for the job

at hand all the time

• 600 IPM Rapids – Faster speeds equals higher production rates. Five times faster than comparable machines

• Standard Three Axis Control – Optional 4th and 5th Axis Available

• 4 HP Servo Spindle Drive – Plenty of power to match the machine's capacity

• 100-6000 RPM range on spindle – Single range, constant torque variable drive. Easy to select the correct speed

for the material and tooling being used

• BT30 Spindle – Industry standard CNC tool holding system

• Heavy Castings with Cast Stand – High weight to work cube ratio, more rigid/accurate

• Linear Ways on X,Y,Z – Faster, smoother interpolation (less stick slip)

• Three-Fourths Enclosure – Full Surround enclosure contains fluid, chips and flying debris

• Automatic Lubrication System – Well maintained machines have a longer service life, and run smoother

• Programmable Coolant System – Control coolant with standard M-Codes

• Work Light & Alarm Light – An operator standing away from machine can see when machining cycle has

finished or machine errors out.

Programmable Lubrication System Heavy Cast-Iron Base Siemens Servo Drives and Motors

AutoMate CNC – Siemens Sinumerik 808 control

All New – Higher Capacity and Functionality Siemens has developed the all new Sinumerik 808D for performing a full

range of milling applications – from simple to complex. It was brought into the Siemens Control product line with the

idea of having this new more powerful, faster system to replace the Sinumerik 802S over time.

Easy Integration and Operation

The machine control panel is connected uses a simple plug & play USB port, and is equipped with the same

ergonomically designed override rotary switches as on the high-end CNCs. The USB port on the front of the control

panel makes transferring part programs and tooling data easy.

PC Based Machining Simulation Software Program Included – Great Training tool and Programming

Aid

When purchasing this machine, you will also be provided with Siemens 808D on PC. This software program,

Siemens 808D on PC can be used as a training tool and as a machining simulation program. It allows users to

program work pieces on a PC and then run a full parts machining simulation offline. New users can learn

programming more easily and experienced operators can prepare programs ahead of time and determine if

there are corrections that need to be addressed before going to the machine.