Smeg WD6090, GW6090 Instruction Manual

OPENING THE DOOR INTRUCTIONS

SMEG WD6090 – GW6090

APERTURA PORTA WD6090 – GW6090

THIS DOCUMENT IS INTENDED FOR USE BY

SPECIALISED SMEG TECHNICIANS ONLY

DO NOT FORCE MANUALLY THE OPENING

The machine is equipped with an automatic door locking/unlocking system

If the door of the chamber should be opened, this can be done by connecting electrically the machine.

Following these instructions it is also possible to connect only to open the door.

• Before proceeding, switch off the power supply.

• Connect the BLUE wire (of the mains cable) to NEUTRAL terminal.

• Connect the BROWN wire to the LIVE terminal.

• Connect the YELLOW-GREEN wire to EARTH terminal.

• DO NOT connect the two BLACK wires.

• Once plugged in, make sure the green light is on.

• Switch “ON” the power supply by rotating the main switch.

• The red light (On/OFF indicator) will switch ON.

temporarily

in single-phase 230V 50Hz,

Switch that powers ON models 6090 is the red element on the front of the machine, under the control panel.

OPENING THE DOOR INSTRUCTIONS

Opening the door of the washing chamber is possible only through the ENTER button.

After pushing it, to open the machine the door handle should be lifted.

BUTTON DESCRIPTION

ENTER: push it to open the door.

FRONT VIEW COMMAND PANEL

OPENING THE DOOR INSTRUCTIONS