Smeg WD6010, GW6010 DATASHEET

19510004500 FOGL.IT-EN FIS.PARETE 1P

Smeg S.p.A. - Instruments Division - [e-mail]

BRACKETS - FIXED FOR TRANSPORT

BRACKETS - MOUNTED FOR DEVICE WALL FIXING

BRACKETS

WD6010 – GW6010

SINGLE DOOR DEVICES – FIXING TO THE BACK WALL

For better stability of the machine, this must be fixed to the back wall using the supplied brackets.

The brackets must be fixed to the top steel panel of the machine, using the supplied screws.

During transport, the brackets are already secured to the top panel.

The brackets must be dismantled and reassembled properly as shown in the following figure.

Others elements for wall fixing are not supplied, are in charge to the customer and must be
appropriately chosen depending on the type of back wall available.