Smeg STA643DD, STA6443-2, STA13XL2 Instruction Manual

INSTRUCTION MANUAL

GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS

Contents

1. Description of the controls ________________________________ 2

2. Operating instructions ___________________________________ 14

3. Cleaning and maintenance _______________________________ 27

4. Troubleshooting _______________________________________ 31

Thank you for choosing one of our products. You are advised to read this manual carefully; it contains all the information you need about the right conditions for the proper, safe use of your dishwasher. The individual sections are laid out to provide you with a step-by-step guide to all your appliance's functions; the texts are easy to understand and are complete with detailed illustrations. Recommendations are given for the correct use of the baskets, spray arms, containers, filters, washing programs, and for operating the controls. Following the cleaning instructions provided here will keep your dishwasher's performance at peak levels in the long term. This user-friendly manual will provide answers to all your questions about use of the dishwasher.

USER INSTRUCTIONS: these consist of recommendations for using the appliance, a description of its controls and of the correct cleaning and maintenance procedures.

1. Description of the controls

1.1 Upper panel

User instructions

All the dishwasher controls are grouped on the upper panel. Switch-on, programming, switch-off etc. procedures are only possible when the door is open.

ON/OFF BUTTON

Pressing this button energises the appliance.

SELECTED PROGRAM INDICATOR LIGHTS

Illumination of this light denotes the program selected and the occurrence of a fault (troubleshooting).

PROGRAM SELECTION BUTTON

By pressing this button in sequence it is possible to select the desired program.

WATER HARDNESS ADJUSTMENT ON INDICATOR LIGHT

The light flashes to indicate that the appliance is in “water hardness adjustment” mode.

SALT WARNIN LIGHT (on some models only)

If the symbol is present, illumination of this light denotes a regenerating salt warning level.

RINSE AID WARNING LIGHT (on some models only)

Illumination of this light signals that rinse aid dispenser is empty.

QUICK TIME OPTION BUTTON + EXTRA OPTION BUTTON

(see “EXTRA OPTIONS” section)

The button controls selection of the quick time programs. (see table).

QUICK TIME OPTION LIGHT

Illuminates to indicate that one of the extra programs (see table) is going to be executed.

User instructions

Err

ENERSAVE OPTION + EXTRA OPTION BUTTON

(see “EXTRA OPTIONS” section)

Press the button to enable/disable the option.

ENERSAVE OPTION LIGHT

Illuminates to indicate that the function is activated.

HALF LOAD BUTTON

Press this button to activate the half load wash option. HALF LOAD LIGHT

Illuminates to indicate that the function is activated.

"3/1" OPTION (EXTRA OPTION) LIGHT

Illuminates to indicate that the function is activated.

PROGRAM DELAY BUTTON

Press this button to delay the start of the program.

14 INFORMATION DISPLAY

N.B.: symbols and styling are guideline and may vary depending on

the model or version of the dishwasher purchased.

Information displayed

Scheduled program duration yes

Remaining program time yes

Delayed start 1 - 24 hours

Error message

PROGRAMS TABLE

SETTING THE WASHING PROGRAM AND

SWITCHING ON

User instructions

The manual contains the programs table for several models. To find the table for your dishwasher, compare the program symbols at the top of the table with those on your control panel.

After identifying the most suitable program with the aid of the programs table:

• Press the ON/OFF button (1) and wait for the PROGRAM INDICATOR LIGHT (2) to illuminate;

• Keep pressing the PROGRAM SELECTION button (3) until the indicator light corresponding to the desired program illuminates;

• select the option required (if any and if the model provides options);

• close the door; after about 2" the program will start LIGHT will

flashing (indicating that the program is being executed).

User instructions

PROGRAMS TABLE

PROGRAMME,

NUMBER &

SYMBOL

SOAK

2 GLASS

ECO (*)

EN 50242

AUTO

60-70

IEC/DIN***

SUPER

****

LOAD CROCKERY AND

Pans and dishes awaiting

completion of the load.

Glass, china and mixed

dishes with light dirt.

Dishes with normal dirt, even

with dried-on residues.

Pans and dishes with normal

dirt, even with dried-on

Very dirty pans and dishes,

even with dried-on residues.

CUTLERY

residues.

PROGRAM

PROGRESS

DURATION

MINUTES

(1)

CONSUMPTION

WATER LITRES

Cold prewash

3,5 0,02

Wash at 45°C Cold rinse Rinse at 70°C Dry

Wash at 45°C Cold rinse Rinse at 55°C Dry

When the "

recognises the type of dirt and automatically adjusts the

AUTO

" program is selected, the dishwasher

washing parameters as appropriate.

Hot prewash Wash at 70°C Cold rinse (2) Rinse at 70°C Dry

135

9,5 1,10

** **

15,5 1,60

IMPORTANT: see “NOTES AND REFERENCES” table on the following pages.

The washing cycle will not take place if the dishwasher door is left open or not properly closed.

POWER KWh (1)

User instructions

QUICK TIME PROGRAMS

(see relevant section for explanation of functioning modes)

PROGRAMME

NUMBER E

SYMBOL

RAPID 27’

ECO

QUICK

NORMAL QUICK

STRONG and

FAST

LOAD CROCKERY AND

CUTLERY

Dishes with light dirt,

washed immediately after

Dishes with normal dirt,

washed immediately after

Dishes with normal dirt,

washed immediately after

Mixed dishes with normal dirt

without dried-on residues.

use

use.

PROGRAM

PROGRESS

Wash at 38°C Rinse at 50°C

Cold prewash Wash at 60°C Cold rinse Rinse at 70°C

Cold prewash Wash at 70°C Cold rinse Rinse at 70°C

Wash at 65°C Cold rinse Rinse at 70°C

IMPORTANT: see “NOTES AND REFERENCES” table on the following pages.

The washing cycle will not take place if the dishwasher door is left open or not properly closed.

DURATION

MINUTI

(1)

55 9,5 1,35

CONSUMPTION

WATER LITRES

6,5 0,70

12,5 1,25

13 1,40

POWER KWh (1)

User instructions

PROGRAMS TABLE

ULTRA CLEAN

PROGRAMME

NUMBER

& SYMBOL

1 SOAK

2 GLASS

ECO (*)

EN 50242

4 NORMAL

IEC/DIN***

ULTRA

CLEAN

****

LOAD CROCKERY AND

CUTLERY

Pans and dishes awaiting

completion of the load

Glass, china and mixed

dishes with light dirt.

Dishes with normal dirt,

even with dried-on

residues

Dishes with normal dirt,

even with dried-on

residues

Very dirty pans and

dishes, even with dried-on

residues.

DURATION

PROGRAM

PROGRESS

Cold prewash

Wash at 45°C Cold rinse Rinse at 70°C Dry

Wash at 45°C Cold rinse Rinse at 55°C Dry

Cold prewash Wash at 65°C Cold rinse Rinse at 70°C Dry

Hot prewash Wash at 70°C Cold rinse (2) Rinse at 70°C Dry

MINUTES

WATER

(1)

LITRES

15 3,5 0,02

105

155

CONSUMPTION

POWER KWh (1)

9,5 1,10

** **

13,5 1,35

15,5 1,70

IMPORTANT: see “NOTES AND REFERENCES” table on the following pages.

The

program terminate with an extra anti-bacteria rinse that ensures a further reduction in the bacteria level. If the temperature falls during this stage of the program (e.g. because the door is opened or due to a power blackout), the program lights flash to warn that the anti-bacteria effect is not guaranteed.

If the dishwasher door is open or not properly closed, the washing cycle will not start.

User instructions

QUICK TIME PROGRAMS

(see relevant section for explanation of functioning modes)

PROGRAMME

NUMBER E

SYMBOL

RAPID 27’

ECO

QUICK

NORMAL

QUICK

STRONG

and FAST

LOAD CROCKERY AND

CUTLERY

Dishes with light dirt,

washed immediately after

Dishes with normal dirt,

washed immediately after

Dishes with normal dirt,

washed immediately after

Mixed dishes with normal

use

use.

dirt without dried-on

residues.

PROGRAM

PROGRESS

Wash at 38°C Rinse at 50°C

Cold prewash Wash at 60°C Cold rinse Rinse at 70°C

Cold prewash Wash at 70°C Cold rinse Rinse at 70°C

Wash at 65°C Cold rinse Rinse at 70°C

DURATION

MINUTI

(1)

CONSUMPTION

WATER LITRES

6,5 0,70

12,5 1,25

13 1,40

9,5 1,35

IMPORTANT: see “NOTES AND REFERENCES” table on the following pages.

If the dishwasher door is open or not properly closed, the washing cycle will not start.

POWER KWh (1)

User instructions

NOTES AND REFERENCES

EN 50242

ENERSAVE

IEC/DIN

ENERSAVE

Only run the soak program with half loads.

Options cannot be used with the soak program.

The ENERSAVE option (if featured) cannot be used with soak, ultra clean, or any programs which do not include the final drying stage.

Standard programme under

. If present, the

option must

be enabled.

** See information sheet provided

***

enabled.

Reference program for laboratories: Detergent: 20g in the dispenser + 10g in the

****

door or tablet. Configuration: see photo in “Using the baskets”.

(1) The cycle duration and power consumption may vary according to the water and

room temperatures, and the type and amount of dishes.

reference programme. If present, the

option must

(2) 1 or 2 cold rinses depending on the model.

REFERENCES for the ENERGY LABEL supplied with the dishwasher:

- Annual energy consumption is based on 280 standard wash cycles with cold water and consumption of low-energy operating modes. Actual consumption depends on the way in which the appliance is used.

- Water consumption is based on 280 standard wash cycles. Actual consumption depends on the way in which the appliance is used.

- Information refers to the EN 50242 STANDARD programme (identified in the programmes table), which is the most effective in terms of combined energy and water consumption. The programme is recommended for dishes with a normal level of dirt.

- Energy consumption in “sleep” mode = 0.02 W.

- Energy consumption in “on” mode = 1.5 W.

- Drying efficiency class on a scale from “G” (minimum efficiency) to “A” (maximum efficiency).

+ 24 hidden pages