Smeg SF4104WMCN User manual [GB]

Contents

EN

1Instructions 22

1.1 General instructions 22

1.2 This user manual 22

1.3 Declaration of conformity 23

1.4 Declaration art. 10.10 Directive 2014/53/EU 23

1.5 How to read the user manual 23

2 SmegConnect 24

2.1 Connectivity requirements 24

2.2 Installing the App 24

2.3 Product registration 24

2.4 Remote connection 29

2.5 Changing Access Point credentials 30

2.6 SmegConnect Menu 33

2.7 Connection information 34

2.8 Deleting the registration 34

2.9 Software updates 35

2.10What to do if... 37

1

Dear customer, we would like to thank you for your confidence in us.

ENGLISH

By choosing one of our products, you have opted for solutions where research for
beauty meets innovative technical design to provide unique objects which become
pieces of furniture.
We hope you get the most out of your household appliance.
Kindest regards.
SMEG S.p.A.

Apple, App Store and iOS are trademarks of Apple Inc.
Google Play Store and Android are trademarks of Google Inc.
Wi-Fi is a trademark of Wi-Fi Alliance.

The manufacturer reserves the right to make any changes deemed necessary for the
improvement of its products without prior notice. The illustrations and descriptions contained
in this manual are therefore not binding and are merely indicative.

TRANSLATION OF THE ORIGINAL INSTRUCTIONS

We advise you to read this manual carefully, which contains all the instructions for
maintaining the appliance’s aesthetic and functional qualities.

For further information on the product: www.smeg.com

1

21

Instructions

1 Instructions

1.1 General instructions

• In order to be used the App
requires a Wi-Fi network with an
Internet router, via which the
appliance and the mobile device
are connected.

• If the signal is too weak, install a
Wi-Fi repeater close to the
appliance.

• When outside the range of the
Wi-Fi network, it is assumed that a
data connection will be available
for the mobile device in order for
the App to be used. WA R N I NG :
depending on your mobile
network operator contract,
additional costs may be incurred.

• The appliance can operate offline
as a “non connected” electrical
domestic appliance but cannot
be controlled via the App when
the Wi-Fi or data connection is
disabled.

• In compliance with the provisions
regarding electromagnetic
compatibility, the appliance
belongs to group 2 and class B
(EN 55011).

• This appliance complies with the
current standards and directives
regarding safety and
electromagnetic compatibility.
However, it is recommended that
people who have pacemakers
fitted, maintain a minimum
distance of 20-30 cm between
the pacemaker and the device
when it is in operation. Contact
the pacemaker manufacturer for
further information.

• For safety reasons and in

compliance with current
legislation, Microwave,
Combined microwave, Grill,
Vapor Clean and Pyrolytic
functions (where available) can
be set but not activated remotely.

1.2 This user manual

This user manual is an integral part of
the appliance and must therefore be
kept in its entirety and within the
user’s reach for the whole working
life of the appliance.

Read this user manual carefully
before using the appliance.

22

Instructions

EN

1.3 Declaration of conformity

The manufacturer, SMEG, declares
that the following types of radio
equipment:

SF4303WMCX - SF4303WVCPX

SFP6303WTPX

SF4104WMCN - SF4104WMCS

SF4104WVCPN - SF4104WVCPS

SFP6104WTPB - SFP6104WTPN

SFP6104WTPS
SF4604WMCNR - SF4604WMCNX
SF4604WVCPNR - SF4604WVCPNX

SFP6604WSPNR - SFP6604WSPNX

SFP6604WTPNR - SFP6604WTPNX

SFP9305WSPX

SF4106WMCS - SF4106WVCPS

SFP6106WSPS - SFP6106WTPS
SF4606WMCNR - SF4606WMCNX
SF4606WVCPNR - SF4606WVCPNX

SFP6606WSPNR - SFP6606WSPNX

SFP6606WTPNR - SFP6606WTPNX

SFPR9606WTPNR - SFPR9606WTPNX

comply with the directive
2014/53/EU.

• Technology:

Wi-Fi IEEE 802.11 b/g/n.

•Frequency: 2400-2497 MHz.

• Maximum output power:

+18.5 dBm.

• The appliance operates in the

ISM 2.4 GHz band.

The full text of the EU declaration of
conformity is available at the
following Internet address:

www.smeg.com/smegconnect/
direttiva_red

1.4 Declaration art. 10.10
Directive 2014/53/EU

This radio equipment is NOT subject
to restrictions on putting into
service or of existing requirements
for authorisation of use in any EU
Member State.

1.5 How to read the user manual

This user manual uses the following reading
conventions:

Instructions

General information on this user
manual, on safety and final
disposal.

Use

Information on the use of the
appliance and its accessories.

Information

• The maximum stand-by power
consumption of the appliance
connected to the mains is 2.0 W.

23

SmegConnect

2 SmegConnect

The appliance is equipped with
SmegConnect technology that allows the
user to control the appliance via an App on
his/her smartphone or tablet computer.

For further information, please refer to the
booklet provided and / or visit the website

www.smeg.com

2.1 Connectivity requirements

• Smartphone or tablet running iOS
version 10.x or later or Android
version 5.1 or later.

• Wi-Fi network (2.4 GHz band, WPA2
protected) active and available in the
place where the appliance is installed.

• Internet connection.

• Name and password of the home Wi-Fi
network or WPS (Wi-Fi Protected
Setup) mode available.

2.3 Product registration

The registration process involves alternating
between carrying out operations on the

App

and on the display of the appliance .
Make sure that you are close to the

appliance.

If the “REGISTRATION FAILED!”
message appears on the display
during the registration process, it
means that some steps of the
procedure were not carried out
correctly or it was stopped.

The registration procedure can be
interrupted by pressing the

RETURN button (available
only on some screens).

2.2 Installing the App

• Download the SmegConnect App to
your mobile device - smartphone or
tablet computer from the App Store
(Apple devices) or Google Play Store
(Android devices) and install it.

24

EN

Creating an account

SmegConnect

There is no need to activate the
“Connectivity” setting on the
appliance beforehand. The
procedure starts automatically.

1. Launch the SmegConnect App.

2. Enter the information required in order to
register.

the fields marked with an asterisk “ ”
are mandatory.

3. A confirmation e-mail is sent to the
address that has been entered when the
registration procedure has been
completed.

Connecting to the appliance

1. Log in.

2. In the following Welcome Username
field, touch Add product.

3. In the following Add product screen,
select the type of product that you wish
to connect to (in this case “oven”)

.

4. Touch the SETTINGS button (at the

bottom right) on the main menu display
on the appliance.

5. Select SmegConnect.

6. Touch the ACCESS button.

7. Touch the REGISTRATION button.

8. Select the registration procedure for the
required product.

25

SmegConnect

Manual mode

1. Select Manual mode.

2. Select Manual mode.

3. Go to the Wi-Fi settings on the mobile
device and select the “smegconnect”
network.

4. Enter the password “smeg0001” and
wait for the connection to be
established.

5. Go back to the SmegConnect App and
touch Next.

6. Press the CONFIRM button within one

minute .

7. Enter the Access Point information:

• Name of the home Wi-Fi network.

• Wi-Fi password.

The appliance supports network
names (SSID) of up to 32
characters (spaces included) and
WPA2 security settings (not WEP
or WPA).

26

8. Touch Next and wait.