Smeg SAI70MW Specifications Sheet

SAI70MW

smeg SmartSense Plus 70cm induction cooktop

FEATURES

SURFACE SHARE

ALSO AVAILABLE IN BLACK SAI70MB

The Smeg SAI70MW 70cm induction cooktop has four induction cooking zones. The two zones on the left and the two zones on the right feature Smeg’s Surface Share technology they can be combined and operated with a single control. Smeg’s Surface Share zones are the largest available and square in shape, ensuring that every part of the zone to the edge is usable, without any cold spots. You can use any shape of pan - long, large, irregular or rectangular; and any number of pans on the single shared surface.

EAN 3760120863516

ﬁnish white ceramic surface, bevelled edge — 33mm front,

5mm sides, straight back

installation built-in hob, topmount

size 700mmW x 520mmD x x 41mm H + 4mmH ceramic

surface

cutout 670mmW x 490mmD

capacity four zones —

front left*: 220x180mm 2100W | boost 2600/3700W rear left*: 220x180mm 2100W | boost 2600/3700W rear right*: 220x180mm 2100W | boost 2600/3700W front right:* 220x180mm 2100W | boost 2600/3700W *These two zones feature Surface Share

total power 7400 watts

power levels • 9 heat settings per zone + 2 boost settings per

zone

• 3 auto-regulated temperatures

∫

42ºC, ∫∫ 70ºC,

current 31 amp, must be hard wired

timers • 3 timers, simultaneous or separate operation

• independent egg timer

controls ergonomic Active Surface Control

safety • pan detection

• automatic cut-off

• touch-control lock

• residual heat indicators

• automatic spillage stop

• child safety lock

pan size automatic pan size recognition

warranty two years parts and labour

BOOST FUNCTION Smeg SmartSense induction cooktops feature single boost (2,300W

and 2,600W) and double boost (3,000W and 3700W) options. Boost provides an additional surge of power for even more intense heat and is ideal for heating large quantities rapidly (eg water for cooking pasta). The temperature will revert to power level 9 when complete (boost is limited to 8–10 minutes if not stopped beforehand).

∫∫∫

94ºC

ACTIVE SURFACE CONTROL Active Surface Control will trigger and automatically illuminate the relevant power control, no matter where on the surface the pan is placed.

SLIDE OR DIRECT CONTROL For precise cooking control, each zone is operated by an ergonomic Active Surface Control slider where you can choose to touch directly or finger swipe up and down the 1 to 9 power levels with no ‘tapping’ required.

PRESET TEMPERATURES There are three pre-selected options to take the guesswork out of cooking – keep warm 42°, simmer 70° or rolling boil 94°C.

RECALL FUNCTION After switching off the cooktop, it’s also possible to reactivate all of the previous settings.

AUTOMATIC COOKING AND TIMERS Each zone can be programmed for automatic cooking, where the zone heats to full power and then automatically reduces to the level you have selected. Stop-cook timers can also be activated for each zone. The STOP & GO function means you can pause the whole cooktop, and return to your previous settings if you need to leave the cooktop unattended for any reason.

SAFETY AND MAINTENANCE For safety, Smeg’s SmartSense cooktops feature automatic spillage stop, touch control locks, child safety locks and residual heat indicators. Cooling fans ensure the temperature beneath the carcase is tempered and protects the electronic controls. And because boil-overs will not burn onto the surface, SmartSense cooktops are very easy to clean simply with a damp cloth.

ID051114

Code SAI70MW

SAI70MW

smeg SmartSense Plus 70cm induction cooktop

front

PLEASE NOTE: drawings are not to scale. They are to assist only.

WARNING: technical specications and product sizes can be varied by the manufacturer without notice. Cutouts for appliances should only be by physical product measurements. The above information is indicative only.

ID051114

Code SAI70MW