Smeg SAI63-38508/410, SAI63, CLASSICPACK Specifications Sheet

SAI63

smeg SmartSense 60cm induction cooktop

EAN 3760120863431

ﬁnish black ceramic surface, 12mm bevelled edge

installation built-in hob, topmount

size 590mmW x 520mmD x x 41mm H + 4mmH

ceramic surface

cutout 560mmW x 490mmD

capacity three zones —

left: 260mm 2300W | boost 2900/3700W front right*: 220x180mm 2100W | boost 2600/3700W rear right*: 220x180mm, 2100W | boost 2600/3700W *These two zones feature surface share

total power 7400 watts

power levels

current 31 amp, must be hard wired

timers • 3 timers, simultaneous or separate operation

controls ergonomic slide control

safety • pan detection

pan size automatic pan size recognition

warranty two years parts and labour

BOOST FUNCTION Smeg SmartSense induction cooktops feature single boost

(2,300W and 2,600W) and double boost (3,000W and 3700W) options. Boost provides an additional surge of power for even more intense heat and is ideal for heating large quantities rapidly (eg water for cooking pasta). The temperature will revert to power level 9 when complete (boost is limited to 8–10 minutes if not stopped beforehand).

• 9 heat settings per zone + 2 boost settings per zone

• 3 auto-regulated temperatures

∫

42ºC, ∫∫ 70ºC,

• independent egg timer

• automatic cut-off

• touch-control lock

• residual heat indicators

• automatic spillage stop

• child safety lock

∫∫∫

94ºC

FEATURES

SURFACE SHARE The Smeg SAI63 60cm induction cooktop has three induction

cooking zones, two of which feature Smeg’s Surface Share technology - they can be combined and operated with a single control. Smeg’s Surface Share zones are the largest available and rectangular in shape, ensuring that every part of the zone to the edge is usable, without any cold spots. You can use pans of different shapes - long, large, irregular or rectangular; and any number of pans on the single shared surface.

PAN DETECTION Zones which do not feature Surface Share are delineated by a cross

where the zone’s horizontal crossbar is the maximum recommended diameter of the cooking utensil’s base and the vertical crossbar being the minimum diameter. Only the base area of the pan is activated by the electromagnetic field within the cooking zone so there is no wastage of power.

SLIDE OR DIRECT CONTROL For precise cooking control, each zone is operated by an ergonomic

slide control where you can choose to touch directly or finger swipe up and down the 1 to 9 power levels with no ‘tapping’ required.

PRESET TEMPERATURES There are three pre-selected options to take the guesswork out of

cooking – keep warm 42°, simmer 70° or rolling boil 94°C.

RECALL FUNCTION After switching off the cooktop, it’s also possible to reactivate all of

the previous settings.

AUTOMATIC COOKING AND TIMERS Each zone can be programmed for automatic cooking, where the

zone heats to full power and then automatically reduces to the level you have selected. Stop-cook timers can also be activated for each zone. The STOP & GO function means you can pause the whole cooktop, and return to your previous settings if you need to leave the cooktop unattended for any reason.

SAFETY AND MAINTENANCE For safety, Smeg’s SmartSense cooktops feature automatic spillage

stop, touch control locks, child safety locks and residual heat indicators. Cooling fans ensure the temperature beneath the carcase is tempered and protects the electronic controls. And because boilovers will not burn onto the surface, SmartSense cooktops are very easy to clean simply with a damp cloth.

ID051114

Code SAI63

SAI63

smeg SmartSense 60cm induction cooktop

PLEASE NOTE: drawings are not to scale. They are to assist only.

WARNING: technical specications and product sizes can be varied by the manufacturer without notice. Cutouts for appliances should only be by physical product measurements. The above information is indicative only.

ID051114

Code SAI63