Smeg SA5502X60 Product Sheet

SA5502X60
finish all satin stainless steel fascia rail and under-
carriage
installation built into overhead cabinetry
motor 250 watt centrifugal, twin impellors, double
air capacity 800m³/hr net
air extraction exhaust direct to atmosphere or recirculate
to kitchen, 150mm diameter (6”) ducting required NB: ducting is not supplied
speed four separate illuminated buttons —
automatic presetting
noise rating 41–58 dBA
illumination two 20 watt halogen, rear mounted
filtration two 4-ply stainless steel/aluminium —
removable and washable
delay stop selectable 5-minute delay stop for fan and
lights
cleaning prompts automatic, LED, visual
• 30 hours for grease lters — wash
• 120 hours for charcoal lters — change
charcoal filters optional, purchasable accessory when
recirculating, code for pair 08999801
warranty two years parts and labour
smeg 60cm deluxe slim jim telescopic rangehood
APPLICATION
Built into overhead cabinetry and concealed behind a cupboard fascia (except the distinctive stainless steel fascia rail), the SA550 deluxe slim jim is uncompromising in power, performance and quietness. It requires a minimum 330mm installation height (concealed behind cabinet fascia) to do its job properly; that is, a massive 800 cubic metres of net air
movement an hour for direct ducting or recirculation.
DUCTING
Direct ducting to atmosphere ensures the maximum removal of grease/oil/ particle-laden vapour plus the odours and, very importantly, the heat —
resulting in a cleaner, cooler and more comfortable work area.
RECIRCULATION
When the cooking vapours cannot be ducted, simply redirect the extracted and filtered air into the kitchen via a duct pipe through the overhead cabinetry. A more frequent inspection and cleaning of the grease filter is
recommended.
CHARCOAL FILTERS
These are purchasable accessories. They are replaceable. One each is clipped to either side of the centrifugal motor and are designed to absorb and diminish cooking odours. Periodic inspection is recommended before replacement. They are optionally used for recirculation only. The activated charcoal filters are not be to washed.
DUCTING MATERIAL
Smooth internal walled duct pipe lengths ensure the most efficient air movement and quieter operation. Consider either high temperature rated PVC or galvanised sheet metal piping. The flexible ducting can be ideal for a very short, tight run. The rangehood’s air exit aperture is designed for 150mm diameter (6”) ducting; however, a 125mm diameter (5”) adaptor is supplied for optional use.
DELAY STOP
Ideally, a rangehood should run for several minutes after all cooking is ceased in order to drag through residual vapours and odours. By selecting the delay stop button at the end of the cooking, the rangehood will turn the motor off in five minutes as well as the lights if they were left on.
CLEANING PROMPTS
After 30 hours’ use, the LED window will prompt visually to inspect the grease filters for possible cleaning. Simply use the reset button to clear the LED window.
If the rangehood has been installed for recirculation and charcoal filters have been clipped to either side of the motor, accumulative use of 120 hours will prompt a different LED warning for inspection and possible replacement of these charcoal filters.
ID310812
Code SA5502X60
598 - 898
SA5502X60
smeg 60cm deluxe slim jim telescopic rangehood
40
260
85
50
280
FRONT ELEVATION
30
150ø
connected power cord
1.15 metre
498
120
packaged dimensions
gross weight
net weight 14.5kg
capacity 800m
air extraction duct or recirculate
electrical supply 240 volt, 50 Hz
electrical connection 1.15 metre connected power cord with 3-pin plug
wattage (motor) 250 watt centrifugal, twin impellors, double air
maximum current 1.17 amp
lights two 20-watt halogen
supplied • brackets, screws, instructions for installation,
optional pair activated charcoal filters for optional use when
435mm x 670mm x 350mm = 0.102m³
16.5kg
3
/hr net
NB: 150mm diameter (6”) ducting required — not supplied
suitable for standard 10 amp GPO
uptake
operation and maintenance
• rear spacer for optional tment
• non-return buttery valve for optional tment
• 2 x 4-ply stainless steel/aluminium grease lters
recirculation, part number 08999801 for pair
30
40
260
34
60
 
120
fixed spigot
12
280
SIDE ELEVATION
150
85
shelf for mounting bracket
transformer
plastic ller piece for optional tment
70
max depth 70mm
SPEED 1 2 3 4
3
net air capacity m
/hr 330 500 660 800
pressure mm H20 34 43 46 48
wattage 135 170 210 250
noise dBA 41 48 54 58
optional tment of charcoal lters for recirculation installation
WARNING: technical specifications and product sizes can be varied by the manufacturer, without notice. Cutouts for appliances should only be by physical product measurements. The above information is indicative only.
ID310812
Code SA5502X60
Loading...