SA520TX60 rangehood
deluxe 60cm, front recirculating, retractable rangehood, halogen lights,
silverfrost/stainless steel
ID241109
SA520TX60
FINISH
SIZE
INSTALLATION
MOTOR
CONTROLS
SPEEDS
ILLUMINATION
NOISE
CAPACITY
FILTER
AIR EXTRACTION
ACCESSORY
WARRANTY
DIRECT RECIRCULATION
No longer is a ducting kit required to be installed in the
cabinetry above the rangehood to redirect the filtered
air back into the kitchen. Simply remove the cover plate
positioned behind the telescopic fascia rail and the air is
efficiently recirculated.
SPACE SAVING
This direct recirculation frees the overhead cabinetry space for
extra kitchen storage.
silverfrost carcase, stainless steel fascia, clear glass deector,
fascia rail replaceable for integration
60cm
built into overhead cabinetry
100 watt single shaded motor with impellor
two front mounted, right
3 settings — LOW, MID, HIGH ‑‑ presettable
two x 20 watt halogen lights
37–53dB
210 cubic metres/hour net, 273 cubic metres/hour gross
one‑piece aluminium mesh (removable)
ducted or recirculated
actived charcoal lter (removable/replaceable), 60cm code CF3061
two years parts and labour
PERFORMANCE
Highly-efficient air extraction of up to 273 cubic metres an
hour further enhanced by large catchment area when glass
visor is telescoped outwards.
QUIETNESS
37–53 dB. The motor/impellor encasement and flues are
all smooth-walled to minimise air drag and hence noise,
welded metal joints for no vibration.
COST CUTTING
As well as the absence of a recirculation kit and its associated
purchase costs, there is no further carpentry involved with this
single and simple installation requirement.
FULL INTEGRATION
Mounted above the cooktop in cupboard and suspended
from a shelf in the cabinet cavity, the front fascia rail is fully
integrated into the cupboard line when the rangehood is not
in use. This front rail is replaceable by a decor strip of timber
or laminated material.
AUTOMATION
Preset fan speed and/or lights to operate automatically when
rail is pulled forward.
MAINTENANCE
Easy lift-out grease filter is washable; removable light diffuser
for bulb access. All clean lines for wipe-over maintenance.
SAFETY
Thermal overload protector or motor; fire-retardant
hardened metal and mesh. VO self-extinguishing
polycarbonate for motor housing and internal flue.
CHARCOAL FILTER
This accessory is fitted for the effective removal of cooking
odours in the circulation application. These filters are not to
be washed and are replaceable.
DIRECT DUCTING
When the extracted air can be sent straight to atmosphere,
simply replace the front coverplate and the top exit, in
conjunction with a duct pipe.
SA520TX60 rangehood
170
40
280
0-185
20
598
498
123
80
169
80
centre
recirculation
vent
80
169
power
cord
100
18
pick-up points
for shelf
598
498
removable
spigot
power
cord
80
filtered air back into kitchen
duct to atmosphere
duct to atmosphere
deluxe 60cm, front recirculating, retractable rangehood, halogen lights,
silverfrost/stainless steel
height
width
depth
packaged dimensions
net weight
gross weight
capacity
noise rating
electrical supply
electrical connection
wattage
total current
air exit aperture
supplied
170mm
598mm
retractable visor closed — 300mm
retractable visor open — 485mm
645mm x 390mm x 255mm = 0.065m³
8.6kg
9.7kg
273m3/hr gross, 210m3/hr net
37–53 dB
240 volt, 50 Hz
3‑pin plug, 1.25m power cord
motor: 100 watt, single‑shaded pole
light: 2 x 20 watt halogen
total: 140 watt
0.6 amp
123mm diameter for 125mm (5”) dia duct pipe
template for mounting, spigot for duct pipe,
screws, instructions for instalation, operation
and maintenance
ID241109
SA520TX60
PLAN
PLAN
PLEASE NOTE
automatic recirculation: unpacked, the hood has a 475mm x 44mm cover
platge screwed in place over the recirculation vent visible behind the
telescopic fascia rail — remove cover for recirculation mode.
direct ducting to atmosphere: leave cover plate in place, use roof exit
and t the supplied spigot (123mm diameter) to take a 125mm (5”)
diameter duct pipe.
NB: drawings are not to scale —
they are to assist only
air ltering options
WARNING: technical specifications and product sizes can be varied by
the manufacturer without notice. Cutouts for appliances should only be by
physical product measurements. The above information is indicative only.