Smeg SA8210BI, SA8210X-1, PL8210X-1, PL8210X-2 Instructions Manual

Download

INSTRUCTION MANUAL

DISHWASHER

Contents

1. Safety and operating instructions AAAAAAAAAAAAAAAAAAAAAAAAAAA 

2. Installation and hook-up AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA

3. Description of the controlsAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA

4. Operating instructionsAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA

5. Cleaning and maintenance AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA

6. Troubleshooting AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA 

Thank you for choosing this product. We advise you to carefully read all the instructions contained in this manual, in order to understand how to operate your dishwasher safely and correctly. The manual is divided into paragraphs, which provide a step by step description of the dishwasher functions, with clear instructions accompanied by detailed illustrations. Recommendations are given for the correct use of the baskets, spray arms, containers, filters, washing programs, and for operating the controls. Follow the recommended cleaning procedures to ensure that your dishwasher always remains in perfect working order. This manual provides a quick and easy reference for answering all your questions concerning the use of your new dishwasher.

INSTALLATION INSTRUCTIONS: these are intended for the qualified technician who must carry out the installation, hook-up and testing of the appliance.

USER INSTRUCTIONS: these consist of recommendations for using the appliance, a description of its controls and of the correct cleaning and maintenance procedures.



Safety instructions

1. Safety and operating instructions

THIS MANUAL FORMS AN INTEGRAL PART OF THE APPLIANCE: IT MUST ALWAYS BE KEPT INTACT TOGETHER WITH THE DISHWASHER. BEFORE USING THE APPLIANCE, CAREFULLY READ ALL THE INSTRUCTIONS CONTAINED IN THIS MANUAL. INSTALLATION MUST BE PERFORMED BY A QUALIFIED TECHNICIAN, IN COMPLIANCE WITH THE REGULATIONS IN FORCE. THIS APPLIANCE IS INTENDED FOR DOMESTIC USE, AND COMPLIES WITH THE

DIRECTIVES 72/23, 89/336 (INCLUDING 92/31)

INCLUDING THE PREVENTION AND ELIMINATION OF RADIO FREQUENCY INTERFERENCE. THE APPLIANCE IS DESIGNED FOR THE FOLLOWING PURPOSE:

AND DRYING OF DISHES

IMPROPER.

USES OTHER THAN THOSE DESCRIBED ABOVE.

THE NAME PLATE FEATURING THE TECHNICAL DATA, SERIAL NUMBER AND MARKINGS IS VISIBLY POSITIONED ON THE INNER EDGE OF THE DOOR.

NEVER BE REMOVED.

DO NOT LEAVE THE DISCARDED PACKAGING MATERIALS UNSUPERVISED WITHIN THE HOME. SEPARATE THE VARIOUS MATERIALS WHICH MAKE UP THE PACKAGING AND TAKE THEM TO THE NEAREST SORTED WASTE COLLECTION CENTRE.

THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR

THE NAME PLATE ON THE INNER EDGE OF THE DOOR MUST

; ANY OTHER USE SHALL BE CONSIDERED

CURRENTLY IN FORCE,

EEC

WASHING

THE APPLIANCE MUST BE PROVIDED WITH AN EARTH CONNECTION IN ACCORDANCE WITH THE ELECTRICAL SAFETY REGULATIONS IN FORCE.

THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR DAMAGE TO PERSONS OR PROPERTY RESULTING FROM THE FAILURE TO EARTH THE APPLIANCE OR FROM A DEFECTIVE EARTH CONNECTION.

IF THE APPLIANCE IS INSTALLED ON A CARPETED OR COVERED FLOOR, ENSURE THAT THE OPENINGS ON ITS UNDERSIDE ARE NOT OBSTRUCTED.

ALWAYS SWITCH OFF THE DISHWASHER AFTER EACH USE TO AVOID WASTING ELECTRICITY.

OBSOLETE APPLIANCES MUST BE RENDERED UNUSABLE. CUT OFF THE MAINS POWER CORD AFTER UNPLUGGING IT FROM THE WALL OUTLET, AND MAKE SAFE ANY COMPONENTS WHICH MIGHT BE DANGEROUS FOR CHILDREN (LOCKS, DOORS, ETC.).



Safety instructions

THIS APPLIANCE IS MARKED ACCORDING TO THE

2002/96/EC

WEEE

( YOU WILL HELP PREVENT POTENTIAL NEGATIVE CONSEQUENCES FOR THE ENVIRONMENT AND HUMAN HEALTH, WHICH COULD OTHERWISE BE CAUSED BY INAPPROPRIATE WASTE HANDLING OF THIS PRODUCT.

THE SYMBOL ACCOMPANYING THE PRODUCT, INDICATES THAT THIS APPLIANCE MAY NOT BE TREATED AS HOUSEHOLD WASTE. INSTEAD IT SHALL BE HANDED OVER TO THE APPLICABLE COLLECTION POINT FOR THE RECYCLING OF ELECTRICAL AND ELECTRONIC EQUIPMENT. DISPOSAL MUST BE CARRIED OUT IN ACCORDANCE WITH LOCAL ENVIRONMENTAL REGULATIONS FOR WASTE DISPOSAL. FOR MORE DETAILED INFORMATION ABOUT TREATMENT, RECOVERY AND RECYCLING OF THIS PRODUCT, PLEASE CONTACT YOUR LOCAL CITY OFFICE, YOUR HOUSEHOLD WASTE DISPOSAL SERVICE OR THE SHOP WHERE YOU PURCHASED THE PRODUCT.

IN THE EVENT OF A FAULT, DISCONNECT THE DISHWASHER FROM THE ELECTRICAL POWER SUPPLY AND SHUT OFF THE WATER TAP.

DO NOT USE APPLIANCES WHICH HAVE BEEN DAMAGED DURING TRANSIT! IF IN DOUBT, CONSULT YOUR DEALER. THE APPLIANCE MUST BE INSTALLED AND CONNECTED IN ACCORDANCE WITH THE INSTRUCTIONS PROVIDED BY THE MANUFACTURER OR BY A QUALIFIED TECHNICIAN.

THE APPLIANCE IS INTENDED FOR USE BY ADULTS.

CHILDREN TO COME NEAR OR PLAY WITH THE DISHWASHER. KEEP CHILDREN AWAY FROM DETERGENTS AND FROM THE OPEN DISHWASHER DOOR. THE PACKAGING MATERIALS (PLASTIC BAGS, POLYSTYRENE, METAL BARS, ETC.) MUST NOT BE LEFT WITHIN THE REACH OF CHILDREN. KEEP CHILDREN AWAY FROM THE OPEN DISHWASHER. THE APPLIANCE MAY CONTAIN RESIDUES OF DETERGENT WHICH CAN CAUSE IRREVERSIBLE DAMAGE TO THE EYES, MOUTH, AND THROAT, AS WELL AS POSSIBLE DEATH BY SUFFOCATION.

ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT

). BY ENSURING THIS PRODUCT IS DISPOSED OF CORRECTLY,

ON THE PRODUCT, OR ON THE DOCUMENTS

EUROPEAN DIRECTIVE

DO NOT ALLOW

DO NOT INTRODUCE SOLVENTS SUCH AS ALCOHOL OR TURPENTINE WHICH MAY CAUSE AN EXPLOSION.

DO NOT LOAD DISHES THAT ARE SOILED WITH ASH, WAX OR PAINTS.

LEANING OR SITTING ON THE DISHWASHER DOOR WHEN OPEN MAY CAUSE THE APPLIANCE TO OVERTURN, PUTING PEOPLE AT RISK. NEVER LEAVE THE DISHWASHER DOOR OPEN; PEOPLE MIGHT TRIP OVER IT.



Safety instructions

DO NOT DRINK THE WATER RESIDUES WHICH MAY BE PRESENT INSIDE THE DISHES OR DISHWASHER AT THE END OF THE WASHING PROGRAM AND BEFORE THE DRYING CYCLE.

KNIVES OR OTHER SHARP-ENDED COOKING UTENSILS MUST BE PLACED IN THE CUTLERY BASKET BLADE-DOWN, OR LAID HORIZONTAL IN THE TOP BASKET. TAKE CARE NOT TO CUT YOURSELF AND ENSURE THAT THEY DO NOT PROJECT FROM THE BASKET.

AQUASTOP M ODELS

THE AQUASTOP DEVICE PREVENTS FLOODING IN THE EVENT OF A WATER LEAK. WHEN THE AQUASTOP DEVICE IS TRIPPED, CALL IN A QUALIFIED TECHNICIAN TO IDENTIFY AND REPAIR THE FAULT. IN MODELS EQUIPPED WITH THE AQUSTOP DEVICE, THERE IS A SOLENOID VALVE INSIDE THE WATER INTAKE HOSE.

HOSE AND DO NOT ALLOW THE SOLENOID VALVE TO DROP INTO WATER.

DISCONNECT THE APPLIANCE FROM THE ELECTRICAL POWER SUPPLY AND FROM THE WATER SUPPLY.

IMMEDIATELY AFTER INSTALLING THE DISHWASHER, PERFORM A QUICK TEST OF THE APPLIANCE FOLLOWING THE INSTRUCTIONS BELOW. IF THE DISHWASHER FAILS TO OPERATE CORRECTLY, DISCONNECT IT FROM THE ELECTRICAL POWER SUPPLY AND CALL THE NEAREST TECHNICAL SERVICE CENTRE.

APPLIANCE.

IN THE EVENT OF DAMAGE TO THE WATER INTAKE HOSE,

DO NOT ATTEMPT TO REPAIR THE

DO NOT CUT THE

THE DISHWASHER MEETS ALL THE REQUIREMENTS SET OUT BY THE REGULATIONS IN FORCE CONCERNING SAFETY AND ELECTRICAL EQUIPMENT. ANY TECHNICAL CHECKS SHOULD BE CONDUCTED EXCLUSIVELY BY A TRAINED AND AUTHORISED TECHNICIAN:

CARRIED OUT BY UNAUTHORISED PERSONS WILL INVALIDATE THE WARRANTY, AS WELL AS POSING A POTENTIAL HAZARD TO THE USER.

The manufacturer declines all responsibility

for damage to persons or property

REPAIRS

resulting from failure to observe the above precautions, from tampering with even a single component of the appliance, or from the use of non original spare parts.



Installation instructions

2. Installation and hook-up

Remove the polystyrene basket retainers. Position the appliance in the desired place of installation. The back or sides of the dishwasher may be placed up against walls or other furniture units. If the dishwasher is installed near a heat source, fit the special insulating panel to prevent overheating and malfunction of the appliance. To ensure stability, install integrated or built-under dishwashers only under continuous worktops, and screw them to the adjacent units. To facilitate the installation procedure, the intake and drain hoses can be positioned in any direction; make sure that the hoses are not kinked, crushed or pulled too tightly. Make sure to tighten the locking ring-nut once the pipes have been placed in the direction required. A hole at least 8 cm in diameter is required to allow the power supply cable and pipes to pass.

Level the appliance on the floor using its adjustable feet. This operation is essential for ensuring correct operation of the dishwasher.

Building-in a dishwasher underneath a ceramic hob is absolutely forbidden.

A dishwasher can be built-in underneath a conventional hob provided there is no break in the kitchen worktop, and the dishwasher and hob are installed and secured correctly, so that no hazards are

generated.

For free-standing models only

Installing a hob on top of a free-standing dishwasher is absolutely forbidden.

If the appliance is not built-in and is therefore accessible on one side, the door hinge area must be covered for safety reasons (injury hazard). The covering fixtures are available as an accessory from specialist dealers or the After-Sales Service.

To build in the dishwasher, the special kit must be purchased from authorised dealers or the After-Sales Service.



Installation instructions

2.1 Water supply connection

Preventing the risk of clogging or damage: if the water pipe is new or

has not been used for a long time, before connecting to the water supply check that the water is clear and free of impurities, to prevent damage to the appliance. The dishwasher must always be connected to the water

system with new hoses; old or used hoses must never be reused.

CONNECTING TO THE WATER SUPPLY

Connect the intake hose to a cold water supply with ¾” gas thread, inserting the filter A supplied with the dishwasher.

place with your hands and then complete by tightening about ¼ of a turn with pliers.

In dishwashers equipped with the ACQUASTOP device, the filters is already fitted inside the threaded ring.

Take care to screw the hose firmly into

The dishwasher can also be connected to a hot water supply

exceeding 60°C

washing time by approximately 20 minutes, but slightly reduces its effectiveness. Make the connection to the domestic hot water supply using the same procedure described for connecting to the cold water supply.

DRAIN CONNECTION

Insert the dishwasher’s drain hose into a drain pipe having a diameter of at least place it inside the kitchen sink using the plastic support provided, taking care not to crush or excessively bend the hose. It is important to prevent the hose from coming loose and falling. For this purpose, the plastic support is equipped with a hole for tying it to the wall or water tap.

The free end should be positioned at a height of between

cm,

and should never be submerged in water. If a horizontal drain extension hose is used (for a maximum of 3 m) the drain hose can be placed at a maximum height of



. Supplying the appliance with hot water cuts down the

4 cm

, or alternatively,

30 and 100

85 cm

from the ground.

not

Installation instructions

2.2 Electrical connection and precautions

CHECK THAT THE VOLTAGE AND THE FREQUENCY OF THE MAINS MATCH THE RATINGS ON THE NAME PLATE OF THE APPLIANCE POSITIONED ON THE INNER EDGE OF THE DOOR.

THE PLUG ON THE SUPPLY CORD AND THE CORRESPONDING SOCKET OUTLET MUST BE OF THE SAME TYPE AND MEET THE REGULATIONS IN FORCE.

THE PLUG MUST BE ACCESSIBLE AFTER INSTALLATION.

NEVER DISCONNECT THE PLUG BY PULLING ON THE POWER SUPPLY LEAD.

IN THE EVENT OF DAMAGE TO THE SUPPLY CORD

BY THE MANUFACTURER OR AN AUTHORIZED TECHNICAL SERVICE CENTRE.

, HAVE IT REPLACED

DO NOT USE ADAPTORS OR SHUNT CONNECTIONS

THE POSSIBILITY OF OVERHEATING OR BURNING.

IN ORDER TO AVOID

In the event of damage to the supply cord, have it replaced by the manufacturer or an Authorized Technical Service Centre in order to avoid any risk.



User instructions

3. Description of the controls

3.1 Front panel

All the dishwasher control are grouped on the front panel. Programming and option selection are only possible with the

1 ON/OFF

2 START/PAUSE

3 SELECTION PROGRAMS

4 PROGRAMS

5 ½ LOAD WASH

6 ½ LOAD WASH

7 PROGRAM DELAY

8 PROGRAM DELAY

BUTTON

LIGHTS

BUTTON

LIGHT

BUTTON (on some models only)

LIGHTS (on some models only)

door closed



9 NO RINSE AID

RECESSED DOOR HANDLE

LIGHT

User instructions

SETTING THE WASHING PROGRAM

To select the most suitable program for the dishes to be washed refer to the table below, which indicates the most appropriate program according to dish type and degree of soiling.

PROGRAM SELE CTI ON TYPEA ND GRA DE D IRT

PANS AND DISHES

SOAK

NORMAL

ECO

(*)

IN WAITING OF

COMPLETING

THE LOAD

PANS AND DISHES

NOT VERY DIRTY

BUT W ITH DRY RESIDUALS

PROGRE SS

PROGRAM

Cold pre wash

Cold prewash Wash at 45°C Rinse at 45°C

DUR AT ION CON SUM PTI O N

MINUTE S

WATER

(1)

LITRES

12' 7 0,03

157'

13,6

POWE R KWh ( 1 )

0,74

Dry

Wash at 55°C Cold rinses Rinse at 68°C Dry

Cold prewash Wash at 65°C Cold rinse Rinse at 68°C Dry

150' 16 1, 45

95' 20

1,42

ECO

NORMAL

Eco

PANS AND DISHES

DIRTY AND

WITH DRY RESIDUALS

PANS AND DISHES

NORMAL DIRTY

WITHOUT DRY RESIDUALS

Prewash at 45°C

SUPER

PANS AND DISHES

VERY DIRTY

WITH DRY RESIDUALS

Wash at 70°C 2coldrinses Rinse at 70°C

115 ' 24 1,77

Dry

Only

run the soak program with half loads.

HALF LOAD

The

option

(5)

is available for all programs

except the soak program

(*) Reference program as AS/NZS 2007 (NORMAL ECO).

(1) The cycle duration and power consumption may vary according to the water and room

temperatures, and the type and amount of dishes.

The washing cycle will not take place if the dishwasher door is left open or not properly closed.

User instructions

TABLE FOR CERTIFICATION BODIES

Reference standard AS/NZS 2007

NORMAL ECO

into the dispenser

pour

10g

(*) Selector on

of cleaner on to the appliance door

20g

and

Reference program Load 14 place-settings Type of detergent in accordance with AS/NZS 2007

Amount of detergent

Rinse aid setting 4/6

At the end of the cycle, you MUST open the door approximately to improve the drying performance.

AS/NZS 2007 cycle test conditions:

The upper basket must be set in the low position. Lower basket: the grid "A" ("lower basket" section) must not be raised. Upper basket: on the left, there are two saucers underneath the cups.

50 mm



AS/NZS 2007

User instructions

front

In the

small

of the dishwasher.

there are one or two supports (depending on the models) for

(B)

plates

. To use them, they have to be turned towards the front



User instructions

3.2 Washing programs

The dishwasher is equipped with a control panel, described in chapter "3. Description of the controls", from which it is possible to carry out all the power switch-on, switch-off and programming operations.

Before starting a washing program make sure that:

• The water supply tap is open.

• The correct amount of detergent has been added to the

dispenser.

• The baskets have been correctly loaded.

• The spray arms are able to rotate freely and without

obstruction.

• The dishwasher door is securely closed.



SWITCHING ON

When the The indicator lights will display the dishwasher's "status".

PROGRAMMING

Programming operations are only possible with the As long as the door is open, the

PROGRAM SELECTION

Press the button the program required comes on.

ON/OFF

(3)

several times until the light of

button

PROGRAM SELECTION

(1)

is pressed, the dishwasher switches on.

door closed

PROGRAMS (4)

lights remain off.

User instructions

STARTING THE PROGRAM

To start the dishwasher, press the

START/PAUSE

button seconds, until the light of the selected program starts to flash (confirmation beep).

The light will flash as long as the program is in progress, to indicate that it is being performed.

END OF PROGRAM

At the end of the program the beeper sounds briefly and the program

lights 4

and 5 (marked "end") flash.

INTERRUPTION A PROGRAM

To interrupt a pr

•

press the

ogram in progress:

START/PAUSE

button

(2)

; the light of the program in

progress remains on (confirmation beep);

•

you may now restart the program by pressing button

restarts, or change or annul the program (see "

PROGRAM

", or "

NNULLING A PROGRAM

").

(2)

for a few

(2)

again until it

HANGING A

CHANGING A PROGRAM

To change the running program it is necessary:

•

to interrupt the running program (see “

•

select the new program;

•

start the program (see “

TARTING THE PROGRAM

NTERRUPTION A PROGRAM

”);

”).



User instructions

ANNULLING A PROGRAM

To annul the program, keep the the program is interrupted (light on and confirmation beep).

Press button pressed until the "end") come on.

The water in the tank will be pumped out and the program will end at the point where it was interru

In case that the door is opened during the operation, to the next door closing it is going to be necessary to start the program as shown in paragraph “ point in which it was interrupted.

In case that the tub temperature is higher than 50°C the program will start about 30 seconds later.

HALF LOAD WASH SETTING (available in all programs except the soak program)

This function is ideal for small loads and saves water and electricity. It is controlled by the

LOAD

button

upper basket only.

IMPORTANT:

remember the next wash is not also carried out in half load

by mistake

mode

(2)

again and keep it

lights 4

pted.

TARTING THE PROGRAM

(5)

and allows washing in the

at the end of the program

to deactivate the function

START/PAUSE

and 5 (marked

”. The program will resume from the

to ensure

button

HALF

(2)

pressed until



A cutlery basket can be placed in the upper basket, while the lower basket must be left empty.

CAUTION: there is no point in loading dishes and cutlery in the lower basket, since the jet of water will only reach the upper basket.

User instructions

DELAYING THE PROGRAM (available in all programs except the soak program)

PROGRAM DELAY

The the washing program by 3, 6 or the dishwasher to work at your preferred time of day.

After selecting the delay, start the program (see relative section).

The appliance will prewash the dishes, after which the "program delay" set previously will come into effect (light start of the program and light

(7)

button

can be pressed to delay the start of

9 hours.

(4)

indicating the program set

This function allows you to set

(8)

indicating the time left before the

flash

If you wish to proceed as follows:

•

press the

PROGRAM DELAY

flashing and remain constantly on;

•

press the

delay set (lights 3, 6 and 9 off);

•

press the

has been set, the the set program start to annulled, the program.

reset or change the delay

START/PAUSE

light

PROGRAM DELAY

START/PAUSE

PROGRAM DELAY

only

the program light

once the program has started,

(2)

button

(8)

and the light

button

flash

for a few seconds, until the

(4)

of the program set stop

button

(7)

to change or annul the

(2)

to start the program. If a delay

(8)

light

; if the program delay has been

(4)

will flash to indicate the start of

and the light

(4)



User instructions

To set the delay once the program has started

If the program you wish to carry out is the same as the one already in progress:

•

press the

program

•

annul the program in progress (see relative section) and wait for the

cycle to come to an end;

•

select the program again;

•

select the delay required;

•

press the

If the program you wish to carry out is different from the one already

•

press the

program

•

change the program;

•

select the delay required;

•

press the

dishwahser will pump out the water and restart with the delay set and the new program.

START/PAUSE

lights 4

START/PAUSE

in progress:

START/PAUSE

lights 4

START/PAUSE

button

and 5 (marked "end") come on;

button

and 5 (marked "end") come on;

button

(2)

to start the new program.

(2)

, proceed as follows.

for a few seconds, until the

to start the new program. The



User instructions

TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT

• Always try to run the dishwasher fully loaded.

• Do not wash the dishes in running water.

• Use the washing program that is most appropriate for each type of

load.

• Do not carry out any preliminary rinsing.

• If available, connect the dishwasher to a hot water supply up to

60°C.

TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENT

The phosphates contained in dishwasher detergents are harmful to the environment. To avoid using excessive amounts of detergent and to save on electricity, observe the following:

• separate the more delicate items from dishes that are more

resistant to aggressive detergents and high temperatures;

• do not pour the detergent directly on the dishes.

REMOVING THE DISHES

At the end of the washing program, wait at least removing the dishes, to allow them to cool down. To prevent any water droplets on the upper basket from falling on the dishes in the lower basket, it is upper basket.

advisable

to unload the lower basket first, and then the

20 minutes

before



User instructions

4. Operating instructions

Once the dishwasher has been correctly installed, prepare for use as follows:

•

Add the rinse aid and detergent.

4.1 Using the rinse aid and detergent dispensers

The detergent and rinse aid dispensers are situated on the inner part of the door: the

dispenser rinse aid dispenser

With the exception of the SOAK program, before every washing cycle it is necessary to add the required amount of detergent to the detergent dispenser. The rinse aid, on the other hand, should only be added as required.

is on the left, and the

detergent

is on the right.



ADDING THE RINSE AID

The rinse aid helps the dishes dry faster and prevents the formation of scale deposits and staining; it is automatically added to the water during the final rinse cycle, from the container situated on the inner side of the door.

To add rinse aid:

•

Open the door.

•

Rotate the container cap anticlockwise by ¼ of a turn and remove it.

•

Add the rinse aid until the container is full (approximately 140 cc).

The optical level indicator on the side of the cap should be completely obscured. Refill the rinse aid when the optical level indicator becomes clear again, or when the rinse aid warning light illuminates.

•

Replace the cover and turn it in a clockwise direction.

•

Use a cloth to remove any spillage of rinse aid which might lead to

the formation of excess foam.

User instructions

ADJUSTING THE RINSE AID DISPENSER SETTING

The dishwasher is factory set for medium water hardness. However it possible to change the setting by turning the dispenser’s selector to the desired position: the amount of rinse aid dispensed is proportional to the selector position.

•

To adjust the rinse aid setting, rotate the dispenser cap through a

quarter turn in an anticlockwise direction and remove it.

•

Then use a screwdriver to rotate the rinse aid selector to the desired

position.

•

Replace the cap, turning it clockwise.

• The amount of rinse aid must be increased if the washed dishes

appear dull or feature circular stains.

• If, on the other hand, the dishes are sticky or have white streaks, it

is necessary to reduce the rinse aid setting.

ADDING THE DETERGENT

To open the detergent dispenser cap, lightly press the button P. Add the detergent and close the cap carefully. During the washing cycle, the dispenser will be opened automatically.

• Use only detergents specially formulated for dishwashers. For

optimal washing results it is important to use a good quality detergent.

• The detergent packs must be sealed and stored in a dry place to

prevent the formation of lumps which may negatively affect washing results. Once opened the detergent packs should not be kept for too long, otherwise the detergent loses its effectiveness.

• Do not use detergents formulated for washing dishes by hand,

because they produce a great deal of foam and may negatively affect the operation of the dishwasher.

• Add the correct amount of detergent. An insufficient amount of

detergent will result in a partial removal of dirt from the dishes, whereas an excessive amount is wasteful and does not improve the washing results.



User instructions

• The market offers liquid and powder detergents with differing

chemical compositions, which may contain phosphates, or be phosphate-free but contain natural enzymes.

- Detergents containing phosphates are more effective against grease and starch at temperatures above 60°C.

- Enzyme detergents, on the other hand, are also effective at lower temperatures (from 40 to 55°C) and are more easily biodegradable. With enzyme detergents it is possible to obtain at low temperatures comparable results to those which can only be achieved at 65°C using traditional detergents.

For the safeguarding of the environment we recommend the use of phosphate- and chlorine free detergents.

• Also available are tablet detergents which state that that no salt or

rinse aid is required. In some cases, these detergents might not give good results, especially with short and/or low-temperature washing cycles. If performance problems (e.g. a white coating on the tank or dishes, poor drying, dirt on dishes at the end of the wash) are noted, users are advised to return to conventional products (granular salt, powder detergent and liquid rinse aid). However, please note that on return to the use of conventional salt, a number of cycles will be required before the system becomes fully efficient again, so traces of white coating may still be found on the tank and dishes. If the problem persists for too long, contact the After-Sales Service.



• When using detergent in tablet form (bear in mind that we

recommend the use of three separate products: detergent, salt and rinse aid), place the tablets in the cutlery rack. The dispenser is designed to use powder or liquid detergent and the door does not open completely during the washing cycle. This means that a tablet is not completely dissolved (released), which may lead to the following:

- not enough detergent released during the cycle, with poor washing

results;

- the detergent forms a solid block in the distributor and is released

during the final rinse cycle.

The introduction of detergent into the rinse aid dispenser, even in liquid form, will damage the dishwasher.

User instructions

4.2 General warnings and recommendations

Before using the dishwasher for the first time, it is advisable to read the following recommendations concerning dish types to be washed and their loading. There are generally no constraints on the washing of domestic dishes, but in certain cases it is necessary to take their characteristics into account.

Before loading the dishes into the baskets it is necessary to:

• remove coarse food remains: e.g. bones, fish-bones, etc. which

may clog the filter or damage the wash pump.

• soak any pots or pans with burnt-on food remains on the bottom to

facilitate removal, then load them into the LOWER BASKET.

Use the "½ load wash" option (if available) for washing small amounts of dishes; it saves water and electricity. When using this function, only load the basket selected for the ½ load wash; the other basket must remain empty.

There is no need to pre-wash the dishes under running water before loading them into the baskets since this only wastes water.

Correct loading of the dishes helps ensure optimal washing results.

WARNING!

• Make sure that the dishes are securely in place so that they cannot

tip over or obstruct the rotation of the spray arms during the washing cycle.

• Do not place very small objects in the baskets as these could fall

and obstruct the spray arms or the wash pump.

• Containers such as cups, bowls, glasses and pots should always

be loaded with the opening facing downwards and with any cavities at an angle, to allow the water to drain out.

• Do not stack dishes or place them in such a way that they cover

one other.

• Do not place glasses too close together because they may knock

against each other and break, or there might be staining at the point where they touch.

MAKE SURE that the items being washed are dishwasher-safe.



User instructions

Items which are not dishwasher-safe:

• Wooden dishes, pots or pans: these may be damaged by the

high washing temperatures.

• Handcrafted items: these are rarely suitable for washing in a

dishwasher. The relatively high water temperatures and the detergents used may damage them.

• Plastic dishes: heat resistant plastic dishes must be washed in the

upper basket.

• Dishes and objects in copper, tin, zinc or brass: these tend to

stain.

• Aluminium dishes: items made from anodised aluminium may

lose their colour.

• Silverware: silver items may stain.

• Glass and crystal: in general, glass and crystal objects can be

washed in the dishwasher. However, certain types of glass and crystal may become dull and lose their clearness after many washings. Therefore, for these items we recommend using the least aggressive program available.

• Decorated items: the decorated objects available on the market

are generally able to withstand washing in the dishwasher, although the colours may fade after a great many washes. If in doubt as to the fastness of the colours, it is advisable to wash just a few items at a time for approximately one month.



User instructions

4.3 Using the baskets

The dishwasher has a capacity of dishes.

LOWER BASKET

The lower basket receives the full force of the lower spray arm, and should therefore be used for the “toughest” items with a heavier degree of soiling. All types and combinations of loads are permitted, provided that the dishes, pots and pans are arranged with all the soiled surfaces exposed to the water jets coming from the bottom.

rear

The use it, simply lift it until it locks in place.

In the

small

of the dishwasher.

of the basket is fitted with a rack to take

front

there are one or two supports (depending on the models) for

(B)

plates

. To use them, they have to be turned towards the front

14 place-settings

large

, including serving

plates

(A)

. To



User instructions

LOADING THE LOWER BASKET

Carefully load flat plates, soup plates, dessert and serving dishes, positioning them vertically. Pots, pans and their covers must be loaded upside down. When loading soup plates and dessert bowls, be sure to leave a gap between them.

Loading examples:

CUTLERY BASKET

The cutlery should be arranged in an orderly manner inside the basket, with the handles pointing downwards. Take care during loading to avoid injury from the knife blades. The basket is suitable for all types of cutlery, except those long enough to interfere with the upper spray arm. Ladles, wooden spoons and cooking knives can be placed in the upper basket,

making sure that the knife blades do not protrude from the basket.

The cutlery basket features an

sliding tip-up supports

, offering a series of combinations to allow

optimum use of the space available.

exclusive system

of independent



Vertical

inserts

Movement required

to extract the inserts

Horizontal

insert

closed

Horizontal

insert

open

User instructions

It can also be separated into two parts.

UPPER BASKET

It is recommended to load the upper basket with small- or medium-sized items such as glasses, small plates, tea or coffee cups, shallow bowls and light objects made from heat resistant plastic. If the upper basket is used in the lowermost position, it can also be loaded with serving dishes, provided they are only slightly soiled.

The top basket is fitted (on the left) with two plastic racks which can be raised to make room for tall glasses, such as stem glasses. On the right there are two cutlery racks designed to take knives and teaspoons; when not in use, they can be left vertical, attached to the basket. To use the space designed for teaspoons, remove the insert as shown in the illustrations.



User instructions

LOADING THE UPPER BASKET

Load the dishes with the top side facing forwards; cups and concave containers should always be loaded with the opening facing down. The left side of the basket can be loaded with cups and glasses on two levels. In the centre section, plates and saucers can be loaded vertically into the supports provided.

Loading examples:

ADJUSTING THE UPPER BASKET

The upper basket can be adjusted in user’s needs and according to the height of the dishes in the lower basket.

Proceed as follows:

•

pull out the basket to its limit position and pull the right side

upwards. At this point it is possible to load larger sized plates into the lower basket.

•

To return to the original position, pull out the upper basket again and

press the release lever.

two positions

, according to the



User instructions

5. Cleaning and maintenance

Before carrying out any work, always unplug the appliance from the electrical supply or switch off the all-pole disconnection device.

5.1 General warnings and recommendations

Avoid the use of acidic or abrasive detergents.

Clean the outer surfaces and door-lining of the dishwasher regularly using a soft cloth moistened with water or with a normal detergent suitable for painted surfaces. Clean the door gaskets with a damp sponge. Periodically (once or twice a year) it is advisable to clean the tank and gaskets, using a soft cloth and water to remove any deposits.

CLEANING THE WATER INTAKE FILTER

The water intake filter A located at the outlet of the water supply tap needs to be cleaned periodically. After having closed the water supply tap, unscrew the end of the water intake hose, remove the filter A and clean it delicately under running water. Reassemble filter A in its seat and carefully screw the water intake hose back into position.

CLEANING THE SPRAY ARMS

The spray arms can be easily removed for periodic cleaning of the nozzles, to prevent possible clogging. Wash them under running water and carefully replace them in their seats,

movement is in no way impeded

•

To remove the

•

To remove the

central part.

•

To remove the

arm and pull the orbital unit upward. Wash the arms under a jet of running water and return them carefully to their seat.

reassembly, check that the spray arms turn freely.

check that they have been installed correctly.

upper

spray arm, unscrew locking ring R.

lower

orbital

spray arm, simply lift it up, pulling by the

spray arm assembly, take hold of the longer

checking that their rotary

After

Otherwise,

14$+6#.



User instructions

CLEANING THE FILTER UNIT

•

It is advisable to periodically inspect the centre filter C and, if

necessary, to clean it. To remove the filter, grip the tabs, turn them anticlockwise and lift upwards;

•

push the centre filter D from the underside to remove it from the

micro-filter:

•

separate the two parts which make up the plastic filter by pressing

the body of the filter in the zone shown by the arrows;

•

remove the centre filter by lifting it upwards.

GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE:



• The filters should be cleaned under running water using a stiff

brush.

• It is essential to thoroughly clean the filters according to the

above instructions: the dishwasher cannot function if the filters are clogged.

• Carefully replace the filters in their seats, to avoid damaging the

wash pump.

PROLONGED DISUSE:

• Run the soak program twice in succession.

• Unplug the power cord from the socket.

• Leave the door slightly open, in order to prevent the formation of

unpleasant odours inside the washing tank.

• Fill the rinse aid dispenser.

• Shut off the water supply tap.

User instructions

BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE:

• Check that there are no deposits of sludge or rust inside the water

pipe: if there are, allow the water to run from the water supply tap for a few minutes.

• Plug the power cord back into the socket.

• Reconnect the water intake hose and open the tap again.

TROUBLESHOOTING MINOR PROBLEMS

In some cases it is possible to remedy minor problems by referring to the following instructions:

If the program fails to start, check that:

• the dishwasher is connected to the electrical power supply;

• there is no power failure;

• the water tap is open;

• the dishwasher door is properly closed.

If water remains inside the dishwasher, check that:

• the drain hose is not kinked;

• the drain siphon is not obstructed;

• the dishwasher filters are not clogged.

If the dishes are not being cleaned properly, check that:

• the correct amount of detergent has been added;

• the dishes are being loaded correctly;

• the selected program is suitable for the dish types and their degree

of soiling;

• all the filters are clean and positioned correctly;

• the spray arm nozzles are not obstructed;

• there is no object obstructing the rotation of the spray arms.



User instructions

If the dishes fail to dry or remain dull, check that:

• there is rinse aid inside the special container;

• the rinse aid dispenser setting is correct;

• the detergent used is of good quality and has not lost its

effectiveness (for example, through incorrect storage, with the box left open).

If the dishes show signs of streaking, staining, etc., check that:

• the rinse aid dispenser setting is not too high.

If there are visible traces of rust inside the tank:

• the tank is made of steel, and therefore any rust marks are due to

external elements (fragments of rust from the water pipes, pots, cutlery, etc.). Special products are commercially available to remove such marks;

• check that the amount of detergent being used is correct. Certain

detergents can be more corrosive than others.



If after following the above troubleshooting instructions the problem persists, call the nearest After-Sales Centre.

WARNING: any operations performed on the appliance by unauthorised persons are not covered by the warranty and shall be paid for by the user.

User instructions

6. Troubleshooting

The dishwasher is capable of signalling a number of faults through the simultaneous illumination of several indicator lights, with the following meanings:

FAULT DESCRIPTION

Acquastop failure

The anti-flooding system has been activated. The system is tripped in case of water leaks. Contact the after-sales service.

Safety level

The system which limits the water level inside the dishwasher has been tripped. Interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the washing cycle. If the problem persists, contact the after-sales service.

Water heating malfunction

The water is not heated or the heating parameters are not correct. Repeat the washing program; if the problem persists, contact the after-sales service.

Water temperature monitoring malfunction

Interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the washing cycle. If the problem persists, contact the after-sales service.

Water intake malfunction

The appliance does not take in water or does not do so correctly. Check that the water connections are correct, the water intake tap is turned on and the filter is not fouled. If the problem persists, contact the after-sales service.

Water pump-out malfunction

The appliance does not pump out the water or does not do so correctly. Check that the drain hose is not kinked or crushed and that the siphon and filter are not fouled. If the problem persists, contact the after-sales service.

Turbine flow-regulator malfunction

The appliance is not able to "measure" the amount of water loaded accurately. Interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the washing cycle. If the problem persists, contact the after-sales service.



User instructions

FAULT DESCRIPTION

Alternate washing system malfunction

Interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the washing cycle. If the problem persists, contact the after-sales service.

Water intake system malfunction

Contact the after-sales service.

Light off Light on Light flashing

If an alarm occurs the appliance interrupts the program in progress and signals a fault.

Alarms

•

immediately. The E5, E6 alarms interrupts the running program once the cause is

•

resolved, it will bring bach the execution of the program. The alarm E7 is visualized at the end of the cycle that comes, however,

•

brought to the end since the operation of the dishwasher is not harmed.

To “reset” an alarm is necessary:

Open and close the door, or turn off and on the machine. At this point is

•

possible to program the dishwasher again.

E1, E2, E3, E4, E8

and E9 interrupt the current program

If the malfunction persists, contact your authorised Service Centre.

TECHNICAL DATA

Width

Depth measured flush with the outer edge of the control panel

Height

Capacity Water supply pressure Electrical characteristics



597 ÷ 599 mm Free standing: 600 mm

Semi-integrated: 570 mm Free standing from 870 mm to 890 mm

Semi-integrated from 820 mm to 870 mm 14 Standard place settings min. 0,05 - max. 0,9 MPa (min. 0.5 – max. 9 bar) See rating plate

115 125

Misurare l’altezza del pannello comandi; fare coincidere l’indice relativo a tale valore con il profilo superiore della porta in legno; tracciare il posizionamento degli agganci porta.

Measure the height of the control panel; bring the mark relating to this value into line with the top edge of the wooden door; mark the positions of the door connections.

Measurer la hauteur du panneau de commandes; faire coïncider l’index relatif à cette valeur avec le profil supérieur de la porte en bois; tracer le positionnement des crochets de la porte.

Die Höhe des Bedienfelds messen; Die diesem Wert entsprechende Markierung mit dem oberen Profil der Holztür zur Deckung bringen; Die Position der Türaufhängungen anzeichen.

Meet de hoogte van het bedieningspaneel; laat de markering die bij die waarde hoort overeenstemmen met het bovenste profiel van de houten deur; teken de positie van de deurhengsels af.

Medir la altura del panel de mandos; hacer coincidir el índice correspondiente a dicho valor con el perfil superior de la puerta de madera; trazar el posicionamiento de las bisagras de la puerta.

Meça a altura do painel de comandos; faça com que o indicador relativo a este valor coincida com o perfil superior da porta de madeira; marque a posição dos ganchos para porta.

115

125 135 145 155

ATTENZIONE:

Montare la porta e regolare la tensione delle

molle laterali prima dell’installazione.

IMPORTANT:

Door template, do not destroy. Fit door and

adjust hinge tension before installation.

ATTENTION:

Apres montàge de la porte, regler la tension

des ressorts lateraux avant l’installation.

1 2 3 4 5

Solo su alcuni modelli Certain models only Seulement sur certains modèles nur bei einige Modellen Sólo en algunos modelos alleen indien van toepassing

SUPERFICIE INTERNA SURFACE INTERNE INNER SURFACE INNENFLACHE

567

165

75 - 16575

598

3x16

522

567

min. 567min.

600

130

7 8 9 10

m 0,5

min. 0,5 mmin.

m 0,4

min. 0,4 mmin.

1,10

max. 1,10 mmax.

0,3-10 bar0,3-10 bar

1,14 m1,14 m 1,25 m1,25 m 1,23 m1,23 m 1,50 m1,50 m

1,78 m1,78 m 1,66 m1,66 m

1/2”

S N SF

3/4”

0,3-10 bar0,3-10 bar

0,00

min. 0,00 mmin.

LATO SUPERIORE BORD SUPERIEURE UPPER EDGE OBERKANTE

m 0,4

min. 0,4 mmin.

WICHTIG:

Tür montieren, Türfedern vor Einbau

einstellen.

ATENÇÃO:

Antes da instalação, monte a porta e

regule a tensão das molas laterais.

IMPORTANTE:

Montar la puerta y regular los

muellas laterales antes de la instalación.

135

145

155

19 570 0055 02

ATTENZIONE:

Quota : secondo i modelli 820÷870 oppure 860÷910.

"H"

CAUTION:

Depending on the model, distance may be 820÷870 or 860÷910.

"H"

12 13 14 15

ATTENTION:

Cote : selon les modèles 820÷870 ou 860÷910.

“H”

ACHTUNG:

Maß : gemäß den Modellen 820÷870 oder 860÷910.

"H"

LET OP: “H"

Hoogte : voor de modellen 820÷870 of 860÷910.

ATENCIÓN:

Cota : según los modelos 820 ÷ 870 o bien 860 ÷ 910.

"H"

ATENÇÃO:

Cota : dependendo dos modelos 820-870 ou 860-910.

"H"

UPOZORNĚNÍ:

Rozměr „H“ podle modelů 820-870 nebo 8 0- 0

NOTA: N.B.: REMARQUE: ANMERKUNG: NOTA:

Solamente alcuni modelli sono dotati di uno dei dispositivi sotto illustrati. Only some models are equipped with one of the two devices illustrated below. seul quelques modèles sont munis de l’un de deux dispositifs illustrés ci-dessus.

Nur einige Modelle verfügen über eine der beiden unten dargestellten Einrichtungen.NOTA BENE: NOTA:

Só alguns modelos estão equipados com ou dos dois dispositivos ilustrados abaixo

691

MAX 720 mm

Regolazione vite tensione molle (13) Copertura foto con tappo in dotazione (14) Door spring Adjustement device (13) Covering of hole using cap provided (14) Réglage des ressorts de la porte (13) Couverture du trou avec le bouchon fourni (14) Vorrichtung für die Einstellung der Spannung der Türfedem (13) Abdecken des Lochs mit dem mitgelieferten Stopfen (14)

uitsluitend bepaalde modellen zijn uitgerust met één van de twee onderstaand afgebeelde inrichtingen Sólo algunos modelos están equipados con uno de los dos dispositivos que se ilustran a continuación.

Solo su alcuni modelli Certain models only Seulement sur certains modèles nur bei einige Modellen Sólo en algunos modelos alleen indien van toepassing

BEMÆRK:

Afhængigt af modellen er målet ”H” 820÷870 eller 860÷910.

691

HUOMIO

OPGELET

: Mitta ”H” on mallista riippuen 820-870 tai 8 0- 0.

Geef "H" aan volgens de modellen 820÷870 of 8 0÷ 0.

ADVARSEL:

Avhengig av modell kan avstanden "H" være 820-870 eller 8 0- 0.

UWAGA

691

W zależności od modelu, wartość „H” może wynosić

-6-91

820 870 lub 8 0 0.

POZOR:

Kvóta “H” podla modelov 820-870 alebo 8 0- 0.

691

OBSERVERA!

Beroende på modell kan måttet ”H” vara 820-870 eller 8 0- 0.

691

Sicurezza contro gli allagamenti

Questo

Questo sistema di sicurezza protegge il vostro appartamento

da danni dell’acqua. In caso di guasto al tubo di entrata o

permeabilità

permeabilità del sistema della macchina, l’entrata dell’acqua

viene

viene interrotta.

La scatola della sicurezza anti-allagamento montata sul tubo,

contiene parti elettriche. E’ pertanto proibito collocare la

contiene scatola

scatola stessa nell’acqua. Nel caso in cui per una ragione

qualsiasi

qualsiasi la scatola subisca danni, togliere immediatamente

la presa di collegamento dalla rete elettrica.

Aquastop-Verlägerung

Im Handel können längere Aquastopschläuche gekauft werden,

Im die

die von einem Fachmann mit dem bestehenden Aquastopschlauch

ausgetauscht

ausgetauscht werden müssen. Bei einer elgenmächtigen

Verlängerung

Verlängerung des Wasserzufuhrschlauches trägt der Hersteller

keine

keine weitere Verantwortlichkelt.

“Aquastop” por septuplicado”

El sistema “AQUASTOP” por septuplicado protegesu vivienda de forma

fiable

fiable e de danos por escapes de agua. Se corta inmediatamente el

suministro

suministro de agua en caso de cualquier fuga en tubos o en

componentes

componentes del aparato.

contiene componentes eléctricos. Por este motivo no debe

contiene

sumergirse en agua. En caso de que el cajòn de vàlvulas estuviera

sumergirse danado,

danado, debe desconectarse de la red eléctrica, desenchufando la

clavija.

HR AQUASTOP - Zašita pred poplavom

Ovaj sigurnosni sistem štiti vaš stan od štete koju možeuzrokovati voda.

Ovaj U

U slučaju kvara na dovodnoj cijevi ili u slučaju propuštanja na sistemu

stroja

stroja za pranje posuđa, prekida se dovod vode.

Ku ište

Ku ište ventila, odnosno sigumosne naprave, namještene na cijevi,

sadrži

sadrži elektri ne djelove.

Zato

Zato je ne smijete potopiti u vodu. U slu aju da se kutija iz bilo kojeg

razloga

razloga ošteti, odmah isklju ite aparat iz elektri ne mreže.

sistema di sicurezza protegge il vostro appartamento

danni dell’acqua. In caso di guasto al tubo di entrata o

del sistema della macchina, l’entrata dell’acqua

interrotta.

scatola della sicurezza anti-allagamento montata sul tubo,

parti elettriche. E’ pertanto proibito collocare la

stessa nell’acqua. Nel caso in cui per una ragione

la scatola subisca danni, togliere immediatamente

presa di collegamento dalla rete elettrica.

Handel können längere Aquastopschläuche gekauft werden,

von einem Fachmann mit dem bestehenden Aquastopschlauch

werden müssen. Bei einer elgenmächtigen des Wasserzufuhrschlauches trägt der Hersteller

weitere Verantwortlichkelt.

sistema “AQUASTOP” por septuplicado protegesu vivienda de forma

e de danos por escapes de agua. Se corta inmediatamente el

de agua en caso de cualquier fuga en tubos o en

El cajòn de valvulas del tubo acquastop

del aparato.

componentes eléctricos. Por este motivo no debe

en agua. En caso de que el cajòn de vàlvulas estuviera

debe desconectarse de la red eléctrica, desenchufando la

sigurnosni sistem štiti vaš stan od štete koju možeuzrokovati voda.

slučaju kvara na dovodnoj cijevi ili u slučaju propuštanja na sistemu

za pranje posuđa, prekida se dovod vode.

ventila, odnosno sigumosne naprave, namještene na cijevi,

elektri ne djelove.

je ne smijete potopiti u vodu. U slu aju da se kutija iz bilo kojeg

ošteti, odmah isklju ite aparat iz elektri ne mreže.

cajòn de valvulas del tubo acquastop

čč

Aquastop safety device

The AQUASTOP is

The AQUASTOP is safety device. The aquastop assures

the fresh water hose need only take the stress of water

that

that the fresh water hose need only take the stress of water

pressure

pressure during the actual timer water is flowing. If the hose

should

should begin to leak during this time, the magnetic valve in

the

the water spout cuts off the flow, and the hose is relieved of

pressure.

The valve casing on the water-stop hose contains

The

electrically controlled components. It is should not,

electrically therefore,

therefore, be submersed in water. If the housing

becomes

becomes damaged the plug must be removed from the

soket.

SLO AQUASTOP - Zaščita pred poplavo

Ta varnostni sistem varuje vaše stanovanje pred škodo, ki bi

Ta jo

jo povzro ila voda. V primeru okvare na dovodni cevi ali v

primeru

primeru puš anja na sistemu pomivalnega stroja, se prekine

dovod

dovod vode. Ohišje ventila oz.

nameščena

nameščena na cevi, vsebuje električ

Zato

Zato je ne smete potopiti v vodo. V primeru, da se ta škatla iz

kakršnegakoli

kakršnegakoli razloga poškoduje, nemudoma izklopite aparat

iz elektri nega omrežja.

during the actual timer water is flowing. If the hose

begin to leak during this time, the magnetic valve in

water spout cuts off the flow, and the hose is relieved of

Operating pressure DIN 44995.

Operating

valve casing on the water-stop hose contains

controlled components. It is should not,

be submersed in water. If the housing

damaged the plug must be removed from the

varnostni sistem varuje vaše stanovanje pred škodo, ki bi

povzro ila voda. V primeru okvare na dovodni cevi ali v

puš anja na sistemu pomivalnega stroja, se prekine

vode. Ohišje ventila oz.

na cevi, vsebuje električ

je ne smete potopiti v vodo. V primeru, da se ta škatla iz

elektri nega omrežja.

safety device. The aquastop assures

pressure DIN 44995.

Varnostne

Varnostne naprave, ki je

razloga poškoduje, nemudoma izklopite aparat

naprave, ki je

dele.

ne dele.

YU AQUASTOP - Заштитa пpeд пoплaвoм

безбедносни систем вaш стaн од штете ко¼у може

Oвaj безбедносни систем вaш стaн од штете ко¼у може

Oâaj

óçpêîóje âoäa. Y cëy÷ajy êâapa ía âoäoâoäíoj öåâè

äa

äa óçpêîóje âoäa. Y cëy÷ajy êâapa ía âoäoâoäíoj öåâè

y cлyчajy прекидa ce oвoдa вoдe.

èëè

или y cлyчajy прекидa ce oвoдa вoдe.

Êyžèøòå

Кyžиште вeнтиa oднocнo безбедноснe нaпрaвe,

ìoíòèðaíe

ìoíòèðaíe ía öåâè, caäæè eëeêòpè÷íe äeëoâe. Çàòo

íecìeòå

íecìeòå äa je ïoòaïœaòe y âoäy. Yc ëy÷ajy äa ce êóòèja

билo кor paзлora oштети, oдмax иcкœyчите aпapaт

èç

из билo кor paзлora oштети, oдмax иcкœyчите aпapaт

eëeêòpè÷íe ìðeæå.

èç

èç eëeêòpè÷íe ìðeæå.

MK AQUASTOP - aЗаштитa oд пoплaв

Oboj зaштитен систем ro штити вaшиoт cтaн oд пoплaвa.

Oboj

Bo cëy÷ajy ía oøòeòyâaœe ía äoâoäíaòa öåâêa èëè ïaê aêo

cëy÷ajy ía oøòeòyâaœe ía äoâoäíaòa öåâêa èëè ïaê aêo

пpoпyштa систем вo мaшинaтa зa миeœe caдoви, ce пpeкинyвa

ïpoïyøòa

äoâoäoò ía âoäa. Êyêèøòeòo ía âeíòëoò oäíocío ía

äoâoäoò

cèrypíocíaòa íaïpaâa êoja e íaìecòeía ía öåâêaòa, coäpæè

cèrypíocíaòa

eëeêòpè÷íè äeëoâè è çaòoa íe cìeeòe äa ja òoïèòå âo âoäa.

eëeêòpè÷íè

Aкo ce cлyчи од билo кaкви пpичини кyкиштeтo дa ce oштeти,

Aêo

aïapaòoò âeäaíaø ècêëy÷eòå ro oä eëeêòpè÷íaòa ìpeæa.

aïapaòoò

SW 32

вeнтиa oднocнo безбедноснe нaпрaвe,

ía öåâè, caäæè eëeêòpè÷íe äeëoâe. Çàòo

äa je ïoòaïœaòe y âoäy. Yc ëy÷ajy äa ce êóòèja

зaштитен систем ro штити вaшиoт cтaн oд пoплaвa.

систем вo мaшинaтa зa миeœe caдoви, ce пpeкинyвa нa вoдa. Кyкиштeтo нa вeнтлoт oднocнo нa

íaïpaâa êoja e íaìecòeía ía öåâêaòa, coäpæè

äeëoâè è çaòoa íe cìeeòe äa ja òoïèòå âo âoäa.

ce cлyчи од билo кaкви пpичини кyкиштeтo дa ce oштeти,

âeäaíaø ècêëy÷eòå ro oä eëeêòpè÷íaòa ìpeæa.

1/2”

min.10mm

3/4”

Aquastop

Dieses Wasserschutz-System schutz ihre Wohnung zuverlassing

Dieses

vor Wasserschaden. Bei undichtem Wasserzulaufschlauch oder

vor

undichtem Maschinensystem wird jeglicherweiterer Wasserzulauf

undichtem

unterbunden.

beinhaltet elektrisch gesteuerte Bauteile. Er darf deshalb nicht

beinhaltet

in Wasser getaucht werden. Sollte das Ventilkastengehause

beschadigt sein, ist unbedingt der Netzstecker aus zu ziehen.

beschadigt

Paliers de sécurités pour empecher les fuites

Le système est doté de sept paliers de sécuritè pour éviter les fuites

d’eau et protége ainsi votre logement contre d’eventuels dègats

d’eau

matériels. Si le tuyau d’arrivée d’eau n’est pas étanche ou si la

matériels.

machine fuit, ce dispositif arrete l’ecoulement d’eau.

machine

sécuirité qui controle l’arrivée d’eau est situé sur le tuyau et

sécuirité

contient des parties électriques. Il ne faut donc pas le tremper

contient

dans l’eau. S’il est endommagé pour une raison quelconque,

dans

débranchez immédiatement l’appareil en retirant la prise.

débranchez

Wasserschutz-System schutz ihre Wohnung zuverlassing

Wasserschaden. Bei undichtem Wasserzulaufschlauch oder

Maschinensystem wird jeglicherweiterer Wasserzulauf

Der Ventilkasten am Wasserstop Schlauch

Der

Ventilkasten am Wasserstop Schlauch

elektrisch gesteuerte Bauteile. Er darf deshalb nicht

Wasser getaucht werden. Sollte das Ventilkastengehause

sein, ist unbedingt der Netzstecker aus zu ziehen.

système est doté de sept paliers de sécuritè pour éviter les fuites

et protége ainsi votre logement contre d’eventuels dègats

Si le tuyau d’arrivée d’eau n’est pas étanche ou si la

Le boitier de

fuit, ce dispositif arrete l’ecoulement d’eau.

qui controle l’arrivée d’eau est situé sur le tuyau et

des parties électriques. Il ne faut donc pas le tremper

l’eau. S’il est endommagé pour une raison quelconque,

immédiatement l’appareil en retirant la prise.

Cu ø10

MIN

40cm

boitier de

Dispositivo di bloccaggio dell’acqua

Il tubo di carico dell’acqua è provvisto di un dispositivo di

tubo di carico dell’acqua è provvisto di un dispositivo di

sicurezza che blocca l’afflusso dell’acqua qualora il tubo di

sicurezza

carico si deteriori. Questo fatto viene segnalato dall’apparizione

carico

una tacca rossa nella finestrella “ ”. In questo caso, il tubo di

di una tacca rossa nella finestrella “ ”. In questo caso, il tubo di

carico

carico acqua dovrà essere necessariamente sostituito.

Water-stop system

Water-stop

The

The water-stop device protects against water damages caused

by leaks on the hose which could develkop due to natural ageing

the hose. In the water-stop system the leaking water fills the

of the hose. In the water-stop system the leaking water fills the

corrugated

corrugated hose and activates a stop valve which cuts off the

water

water supply to the machine.

This

This fault is shown by a red sector on the window “ ”.

Should

Should this occur, please refer to your Service Agent.

Dispositif de blocage de l’eau

Dispositif

Le tuyau d’alimentation est équipé d’un dispositif de blocage

d’eau.

d’eau. Dans le cas où le tuyau intérieur devrait se détériorer

cause d’une usure naturelle, ce dispositif bloquera l’entrée

à cause d’une usure naturelle, ce dispositif bloquera l’entrée

d’eau

d’eau à l’appareil. Cet inconvenient est signalé par l’apparition

d’un

d’un secteur rouge dans la petite fenêtre “ ”.

Dans

Dans ce cas fermez le robinet d’eau et remplacé le tuyau.

Wasserstop-System

Der

Der Wasserzulaufschlauch ist mit einem Wasserstop-System

ausgestattet.

ausgestattet. Sollte der Innenschlauch durch naturliche Alterung

beschädigt

beschädigt werden, so blockiert das System die Wasserzufuhr

zum

zum Gerät. Die Störung wird durch die Erscheinung einer roten

Markierung

Markierung in Fensterchen “ ” angezeigt.In diesem Fall muß

der

der Wasserhahn geschlossen und der Schlauch ersetzt werden.

che blocca l’afflusso dell’acqua qualora il tubo di

si deteriori. Questo fatto viene segnalato dall’apparizione

acqua dovrà essere necessariamente sostituito.

system

water-stop device protects against water damages caused

leaks on the hose which could develkop due to natural ageing

hose and activates a stop valve which cuts off the

supply to the machine.

fault is shown by a red sector on the window “ ”.

this occur, please refer to your Service Agent.

de blocage de l’eau

tuyau d’alimentation est équipé d’un dispositif de blocage

Dans le cas où le tuyau intérieur devrait se détériorer

à l’appareil. Cet inconvenient est signalé par l’apparition

secteur rouge dans la petite fenêtre “ ”.

ce cas fermez le robinet d’eau et remplacé le tuyau.

Wasserzulaufschlauch ist mit einem Wasserstop-System

Sollte der Innenschlauch durch naturliche Alterung

werden, so blockiert das System die Wasserzufuhr

Gerät. Die Störung wird durch die Erscheinung einer roten

in Fensterchen “ ” angezeigt.In diesem Fall muß

Wasserhahn geschlossen und der Schlauch ersetzt werden.

Waterstop-system

De watertoevoerslang is meet een “waterstop-systeem”

watertoevoerslang is meet een “waterstop-systeem”

uitgerust.

door natuurlijke veroudering, de binnenslang lek

Zou, door natuurlijke veroudering, de binnenslang lek

Zou,

dan blokkeert het systeem de watergevoer.

raken,

raken, dan blokkeert het systeem de watergevoer.

optreden van deze storing kunt u zien aan rode sektor

Het

Het optreden van deze storing kunt u zien aan rode sektor

het venstertje “ ”. Sluit de waterkraan en vevang de

in het venstertje “ ”. Sluit de waterkraan en vevang de

in z’n geheel tegen een nieuwe.

stang

stang in z’n geheel tegen een nieuwe.

Dispositivo de bloqueo del agua

Dispositivo

tubo de carga del agua se encuentra provisto de un

El tubo de carga del agua se encuentra provisto de un

dispositivo

dispositivo de seguridad que bloquea el flujo del agua

cuando

cuando el tubo de carga se deteriora. En este caso, se

observara

observara un señal una mancha roja en la ventanilla “ ” y

será

será necesario sostituir el tubo de carga del agua.

el tubo de carga se deteriora. En este caso, se

necesario sostituir el tubo de carga del agua.

de bloqueo del agua

de seguridad que bloquea el flujo del agua

un señal una mancha roja en la ventanilla “ ” y

Smeg SA8210BI, SA8210X-1, PL8210X-1, PL8210X-2 Instructions Manual

Specifications and Main Features

Frequently Asked Questions

User Manual