Smeg PC45X User Manual

PARTY COOLER



USERS MANUAL

8

8120 518-04

Extent of the delivery:

- Party Cooler as shown on the drawing

- Users manual

Equipment:

1.Transparent tip-up lids

2.Detachable bottom

3.Two side tables of hardwood

4.Refrigerating compartment

5.Bottle holder

6.Variable temperature control

7.Ball bearing castors
Mount the two side tables and the bottle

holder on the handle as shown on the
drawing.

Side Table Installation

Temperature

control

6. Cleaning

Wiping off the condensed water
and occasional cleaning is the
only maintenance needed.

NB!

In no circumstances use soap or
cleaning agents containing soda
and abrasive substances for the
cleaning.

1. Pull the plug out of the wall socket.

2. Remove the side tables and the bottle holder.

3. Remove the lid.

4. Remove the contents of the appliance.

5. Remove the detachable bottom.

6. Wipe the inside and outside surfaces with a damp cloth. The
addition of vinegar (cleaning vinegar, cooking vinegar or vinegar
essence) to the water is good for the prevention of mould
fungus.

7. Take the lid apar t as shown on the drawing and
clean it.

8. Clean the detachable bottom and the lid parts
with lukewar m water and detergent.

9. Wipe all parts thoroughly after the cleaning.

10. Turn the slits in the sealing ring and in the hinge rubber strip
downwards when assembling the lid.

NB!

Avoid overloading the side tables, or else the Party Cooler may
loose its balance (max. 5 kg per side table)!

2

IMPORTANT :

When the Party Cooler is not in use, it must be completely dry inside to avoid
mould growth (if possible, leave the lid open).

7