Smeg MFF01RDUS User manual
Dear Customer,
Thank you for buying the Smeg Milk Frother.
By choosing one of our products, you have opted for a solution in which
aesthetic research and innovative engineering offer unique items that become
decorative elements.
A Smeg appliance always goes perfectly with the other products of the line
and at the same time can be an object of design in the kitchen.
We hope you fully enjoy all the features of your appliance.
For more information, please visit: www.smegusa.com
SMEG S.p.A.
EN
Model MFF01
Milk frother
EN - 1
Important instructions
Important instructions
WARNING: If the instructions contained in this manual are not
followed precisely, fire or explosion may result causing property damage, personal injury or death.
READ AND SAVE THESE INSTRUCTIONS - Your safety and the
safety of others are very important.
We have provided many important safety messages throughout this
manual and on the appliance.
Read all the instructions before using the appliance and always obey all
safety messages.
WARNING
• To reduce the risk of fire or electric shock, do
not remove the cover (or back).
• No user-serviceable parts inside!
• Repair should be done by authorized service
personnel only.
2 - EN
Important instructions
RECOGNIZE SAFETY INFORMATION
This is a safety alert symbol. This symbol alerts you to potential hazards that can result
in severe personal injury or death.
UNDERSTAND SIGNAL WORDS
A signal word - DANGER, WARNING or CAUTION - is used with the safety alert symbol. DANGER denotes the most
serious hazards. It means you could be killed or seriously injured if you do not immediately follow the instructions.
WARNING means you could be killed or seriously injured if the instructions are not followed. CAUTION indicates a potentially hazardous situation, which, if not avoided, could result in minor to moderate injury.
• This appliance is intended for household use only.
• Use this appliance only for its intended purpose. The manufacturer
cannot be held liable for damage caused by improper use of this
WARNING
appliance.
• This appliance complies with current safety regulations. Improper
use of this appliance can result in personal injury and material
damage.
• Read all the instructions before installing or using the appliance
for the rst time.
• Keep these operating instructions in a safe place and pass them on
to any future user.
EN
The safety messages will inform you of potential hazards, on how to avoid the risk of injury
and what can occur if the instructions are not followed.
IMPORTANT: Observe all codes and ordinances in force.
WARNING: For your safety, the instructions contained in this manual
must be followed to minimize the risk of fire or explosion and to prevent
property damage, personal injury or death.
Do not store or use gasoline or other flammable vapors, liquids or materials near
this or any other appliance.
NOTE : This appliance is NOT designed for installation in manufactured (mobile) homes or in recreational vehicles (RVs).
DO NOT install this appliance outdoors.
EN - 3
Important Safeguards
WARNING
When using electrical appliances, basic safety precautions should always be followed to reduce the
risk of fire, electric shock, and/or injury to persons
including the following:
Follow all safety precautions to ensure safe use
of the appliance.
• Read all instructions.
• Do not use the appliance outdoors.
• This appliance is for household use only.
• Do not use the appliance for other than its
intended use.
• Misuse could lead to fires, electric shocks
or personal injury.
• Do not allow children to use the appliance.
• Children should not play with the appliance.
Keep the appliance out of the reach of
children.
• Keep the packaging material (plastic bags,
expanded polystyrene) out of the reach of
children.
• Close supervision is necessary when any
appliance is used by or near children.
• Turn off the appliance immediately after use.
• Do not leave the appliance unattended
while it is running.
• Disconnect the appliance from the wall
outlet before assembly, disassembly,
cleaning and after each use.
• To disconnect, turn any control to the off
position, then remove plug from wall outlet.
• Unplug from outlet when the appliance is
not in use, and before cleaning. Allow to
cool before putting on or taking off parts,
and before cleaning the appliance.
• To protect against fire, electrical shock
and personal injury, do not immerse the
appliance, the power cord or plug in water
or any other liquid.
• Do not touch the appliance or the plug with
wet hands.
• Never try to extinguish a flame/fire with
water: turn off the appliance, unplug it from
the outlet and cover the flame with a lid or
a fire blanket.
• Do not use the appliance if the power cord
or plug is damaged or if the appliance has
been dropped or damaged in any way.
• Do not let cord hang over edge of table or
counter, or touch hot surfaces.
• Do not operate any appliance with a
damaged cord or plug or after the appliance
malfunctions, or has been damaged in any
manner. Return appliance to an authorized
service facility for examination, repair or
adjustment.
• Make sure the power cord does not come
in contact with sharp edges.
• Do not pull on the cord to remove the plug
from the socket.
• Do not place on or near a hot gas or electric
burner, or in a heated oven.
4 - EN
SAVE THESE INSTRUCTIONS
Important Safeguards
• Do not touch hot surfaces. Use handles and
knobs.
• Do not place the appliance near faucets or
sinks.
• Never attempt to repair the appliance
yourself or without the help of a qualified
technician. Failing to do this will void the
warranty.
• In case of malfunction, have the appliance
repaired by a qualified technician.
• Do not make any changes to the appliance.
• Make sure that the power outlet used is
always freely accessible, because only
in this way can it be unplugged when
necessary.
• To remove the plug from the power outlet,
operate directly on the plug. Never pull the
cable, it could be damaged.
• If the appliance should break down, do not
attempt to repair it.
Switch the appliance off, remove the plug
from the power outlet and contact the
Technical After-sales centre.
• If the plug or power supply cable are
damaged, have them replaced exclusively
by the Technical After-sales centre, so as to
prevent all risks.
• Scalding may occur if the lid is removed
during the brewing cycles.
• This appliance is not intended for use by
persons (including children) with physical,
sensory or mental impairments, or lack of
experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
• Danger of burns! The surface of the jug
during and after use is hot. Do not touch it.
• Do not use the appliance without liquid.
Always fill at least up to the MIN level and
not over the MAX level. Both shown inside
the jug.
• The milk foam disks can pose a risk of
suffocation. Keep disks out of the reach of
children.
EN
SAVE THESE INSTRUCTIONS
EN - 5
Important Safeguards
For this appliance
• The jug warms up during operation. Do not
touch the hot surfaces, always pick up the
jug using the handle.
• The appliance shall not be placed in a
cabinet when in use.
• Leave a space of 10 cm around the
appliance.
• Make sure the lid is firmly closed.
• Do not open the lid during the use.
• Do not use the appliance in combination
with parts or accessories from other
manufacturers.
• The use of accessory attachments
not recommended by the appliance
manufacturer may result in fire, electric
shock or injury to persons.
• Place the appliance on a flat, dry surface.
• Avoid wetting or spraying liquid on the
appliance. In case of contact with liquid,
immediately unplug the cord from the
electrical outlet and dry thoroughly: Risk of
electric shock!
• Do not use abrasive cleaners or sharp
objects to clean the appliance.
• The use of an accessory not evaluated for
use with this appliance may cause injuries.
• Do not install the appliance in environments
with a temperature less than or equal to
0°C.
• Do not place the appliance on or in
proximity of electric or gas cookers, or in
a heated oven.
• Verify that there are no foreign objects inside
the appliance.
• People who have pacemakers or other
similar devices fitted must make sure that the
operation of these devices is not affected
by the induction field, the frequency range
of which is between 20 and 50 kHz.
Electrical Cord:
a) A short power-supply cord is provided
to reduce risks resulting from becoming
entangled in or tripping over a longer cord.
b) Longer detachable power-supply cords or
extension cords are available and may be
used if care is exercised in their use.
c) If a long detachable power-supply cord or
extension cord is used:
1. The marked electrical rating of the
detachable power-supply cord or
extension cord should be at least as
great as the electrical rating of the
appliance;
2. If the appliance is of the grounded
type, the extension cord should be a
grounding-type 3-wire cord; and
3. The longer cord should be arranged so
that it will not drape over the counter top
or table top where it can be pulled on
by children or tripped over.
Connect the appliance
Make sure that the mains voltage corresponds
with that indicated on the data plate on the
bottom of the appliance.
Connect the appliance only to a power outlet
installed perfectly with minimum capacity of
10A and with an efficient earth.
If the plug and power outlet are incompatible,
have the power outlet replaced with a suitable
type by qualified staff
.
6 - EN
SAVE THESE INSTRUCTIONS
Important Instructions
This user’s manual
This user’s manual is an integral part of
the appliance and must be kept intact and
available to the user throughout its life cycle.
Use compliant with destination
This appliance is designed to heat and disc
milk and to prepare hot chocolate; Do not
use the product for purposes other than its
intended use.
This appliance is intended for domestic use
only.
Manufacturer’s liability
The manufacturer declines all liability for
damage undergone by persons and objects
due to:
• use of the appliance different from that
envisioned;
• user manual has not been read;
• tampering of individual parts of the
appliance;
• use of non-original spare parts;
• failure to comply with safety
recommendations.
• Old electrical equipment must not
be disposed of with household
waste! In accordance with the law in
force, electrical appliances at the end
of their life should be taken to separate
collection facilities for electrical and
electronic waste. This is so that valuable
materials from old appliances can be
recycled and the environment can be
protected. For more information, please
contact your local authorities or recycling
center employees.
Note that non-polluting and recyclable materials
are used for packaging the appliance.
• Dispose of the packaging materials at
appropriate differentiated waste collection
centers.
Plastic packaging
Risk of suffocation
• Do not leave the packaging or any part
of it unattended.
• Do not allow children to play with the
plastic packaging bags.
EN
Identification plate
The identification plate lists the technical
data, serial number and brand name. The
identification plate must never be removed.
Disposal
Power voltage
Risk of electric shock
• Unplug the appliance.
• Unplug the cord from the wall outlet.
SAVE THESE INSTRUCTIONS
EN - 7
Description / Assembly
DESCRIPTION OF THE
APPLIANCE (Fig.1)
1 Motor base
2 Jug
3 Notched whisk (for frothing milk or
chocolate)
3a Smooth whisk (for hot milk function)
4 Lid
5 Measuring cap
6 START/STOP button
7 Program selection knob
8 LEDs
IDENTIFICATION PLATE
The identification plate states the technical
data, serial number, and marking. The identification plate must never be removed.
BEFORE FIRST USE
(Fig.1)
• Carefully unpack the appliance and remove
all packing materials and any labels and
stickers.
• Clean the motor base (1) with a damp cloth.
Wash all the components and dry thorough-
ly (see par. “Cleaning and Maintenance”)
DESCRIPTION OF CONTROLS
(Fig. 1)
Program selection knob (7)
The appliance is equipped with 6 preset programs and a manual function, which can be
selected using the knob (7).
Knob
icon
Program
Hot chocolate
Hot milk
Hot milk with light froth
Hot milk with thick froth
Cold milk with light froth
Cold milk with thick froth
Manual
Before use, check that all the components are intact.
ASSEMBLY OF COMPONENTS
(Fig. 1)
• Place the jug (2) on the motor base (1).
• Place the whisk (3) inside the jug (2) by
inserting it into the pin.
• Place the lid (4) on the jug (2) and press it
downwards.
8 - EN
Liquid level indications
Symbol Description
Maximum milk filling level
for heating function and
chocolate preparation
(including the amount of
chocolate)
Maximum milk filling level to
be mounted.
Minimum level
Use
USE (Fig. 1)
Recommendations for use
The result of the milk mount function
can be influenced by the ingredients
used.
Use whole milk for best results,
removing it from the fridge immediately before pouring it into the jug
(2).
After a first heating cycle, wait for
the appliance to cool before starting
a second one.
Do not use the appliance without
liquids. Starting the appliance without liquids could damage the jug.
Always fill up to the MIN level and
not beyond the MAX level, both
indicated inside the jug.
The appliance is in error status when
the LED on the knob flashes and
three acoustic signals are repeated
twice.
The appliance displays an error
status if the jug or whisk is not
installed, the jug is removed during
preparation or the cycle is started
with an empty jug.
In the first two cases the cycle fails to
start, while in the last two the cycle
starts but stops after a few seconds.
• Insert the plug into the power outlet.
• The LED (8) flashes, after about 120 seconds of inactivity the appliance positions
itself in stand-by and the LED turns off.
Heat or froth the milk
• Remove the lid (4) and pour cold milk into
the jug (2), referring to the level indications
printed inside the jug itself.
• Refit the lid (4).
• Select the desired program by turning the
knob (7) in correspondence with the red
mark positioned on the knob ring.
The appliance passes from standby
to the work phase.
• Press the START/STOP button (6) to start the
cycle, the LED (8) lights up with a fixed light.
• An acoustic signal and the turning off of the
LED (8) indicate the end of the cycle.
• It is possible to stop the cycle before the time
set by pressing the START/STOP button (6).
• Remove the lid (4) holding it by the side
flaps.
• Remove the jug (2) and pour the milk with
the aid of a spoon.
It is best to add any sugar or sweetening syrups (e.g. honey, agave or
maple juice, etc.) at the end of the
cycle.
Preparing hot chocolate
• Remove the lid (4) and pour the chocolate
ingredients into the jug (2), referring to the
level instructions printed inside the jug and
the recommendations provided by the Smeg
recipe.
• Select the relative program and proceed in
the same way as for milk.
Powder ingredients can be added
during the work phase by removing
the measuring cap (5).
Add the ingredients gradually and in
small amounts a few moments after
the start of the cycle so that the milk
EN
EN - 9
Cleaning and maintenance
warms up. Adding the ingredients
too quickly or in large amounts
could cause the whisk to stop or
detach from its housing.
Manual function
Remove the lid (4) and pour the milk into the
jug (2), referring to the level indications printed
inside the jug.
• Refit the lid (4).
You can select a hot cycle or a cold cycle.
Hot Manual:
• Start the Manual Program (M), with heating
function, by pressing the START/STOP button, the LED (8) lights up steadily; the speed
of the whisk and the temperature increase
proportionally to the duration of the cycle.
The user can interrupt the cycle by pressing
the START/STOP button whenever obtaining
the desired result.
Cold Manual:
• Keeping the START/STOP button pressed
for about 3 seconds, the whisk starts to froth
the milk without heating it and the LED (8)
flashes for the entire duration of the cycle.
The user can interrupt the cycle by pressing
the START/STOP button whenever obtaining
the desired result.
• In both cases, after a certain time,
the manual function will automatically stop to preserve the safety and
functionality of the product.
• An acoustic signal and the turning
off of the LED (8) indicate the end
of the cycle.
• Then proceed as described for milk.
You can remove the measuring cap
(5) to add any powder ingredients
(example: instant coffee, soluble
cappuccino, soluble tea, etc.) during the work cycle.
CLEANING AND
MAINTENANCE (Fig. 1)
Before cleaning, ALWAYS discon-
nect the plug from the socket and
allow the appliance to cool down.
Never immerse the motor base (1)
in water or other liquids.
The instruction manual contains appropriate
instructions and provisions for cleaning, main
tenance and operations recommended by the
manufacturer to the customer. Any other intervention must be performed by an authorized
service representative.
• Remove the whisk (3).
• Remove the jug (2) from the motor base.
• The whisk (3), the lid (4), the measuring cap
(5) and the jug (2) can be washed in the
dishwasher.
• The motor base (1) can be cleaned by first
using a damp cloth and then a dry one. Do
not use detergents or abrasive materials.
-
10 - EN
Cookbook
HOT CHOCOLATE
Quantity for two cups
Ingredients
- Whole milk 250 ml
- Dark chocolate
in flakes 90 gr
Instructions
• Pour the milk into the jug.
• Add the chocolate flakes.
• Close the lid.
• Select the hot chocolate program (
• Press the START/STOP button and wait for
the program to finish.
CAPPUCCINO
Quantity for two cups
Ingredients
- Whole milk 200 ml
- Coffee 80 ml
or strong coffee 40 ml
).
EXPRESSO ICE COFFEE
Quantity for two cups
Ingredients
- Whole milk 200 ml
- Coffee 80 ml
- Ice cubes 4
Instructions
• Put the ice cubes in 2 glasses.
• Dispense coffee from a coffee machine and
pour it on ice in glasses.
• Add a teaspoon of sugar or sweetening
syrup as desired.
• Pour the milk into the milk frother jug.
• Close the lid.
• Select the cold milk program with thick froth
or light froth depending on result desider (
/ ).
• Press the START/STOP button and wait for
the program to finish.
• Pour the milk froth into glasses with coffee
and ice.
EN
Instructions
• Dispense coffee from a coffee machine and
pour it into a cup.
• Pour the milk into the milk frother jug.
• Close the lid.
• Select the hot milk program with thick froth
).
(
• Press the START/STOP button and wait for
the program to finish.
• Pour the milk froth onto the coffee.
• Add a teaspoon of sugar or sweetening
syrup as desired.
EN - 11
Loading...