Smeg LB32 User manual [GB]

-EN- LB32/DS -
19390345302-EN 1 Ed. 02 – 02/02/2015
Read the safety warnings and instructions for the thermodisinfectors in which the rack is used with care, together with the safety instructions of the producer of the glassware and any other item placed on the rack. Badly positioned items or glass which shatters during washing may cause dangerous injuries. If necessary, washing results must be checked and subjected to non-visual inspections.
Q.ty
PART
NUMBER
DESCRIPTION
Q.ty
PART
NUMBER
DESCRIPTION
1
0
TC80DS
LM80DS central pipe (for DS version only)
32
U6170
stainless steel nozzle D=6 H=170 (mm)
1
2
TC80
LM80 central pipe (for version without DS only)
1 - Nozzle spanner
NOZZLE
(E.g. U390 means
Stainless steel nozzle with D=
3mm and H= 90mm)
LB32/DS - INSTRUCTIONS FOR ASSSEMBLY AND USE
1 LIST OF COMPONENTS SUPPLIED
-EN- LB32/DS -
19390345302-EN 2 Ed. 02 – 02/02/2015
ILLUSTRATION
PROCEDURE
Fig.1
Fig. 2
If your product is equipped with the DS device, the pack contains a pipe A (TC80) for the bottom rack and a pipe B (TC80DS) for the top rack, instead of two ordinary pipes A, in which case the pipe B must be fitted as shown in figure 2, i.e. with the pipe projecting towards the rear of the rack, so that once it is inside the appliance it will be aligned with the air intake (for top rack only, can be identified by the set of 3 wheels in line on the back of the rack).
Fig.3
When inserting the rack in the disinfector, the greatest care must be taken to ensure that the tapered connection on the rack is aligned with the one on the machine.
E
2 ASSEMBLY SEQUENCE
The rack is supplied preassembled and thus ready for use; simply take care to position the bottles for washing correctly (nozzle inside).
Loading...
+ 3 hidden pages