Page 1
Instructions Manual
Libretto di Istruzioni
Page 2
EN
INDICE
CONSIGLI E SUGGERIMENTI ..............................................................................................................................................3
CARATTERISTICHE - INSTALLAZIONE.............................................................................................................................4
USO........................................................................................................................................................................................6
MANUTENZIONE...................................................................................................................................................................7
IT
INDEX
RECOMMENDATIONS AND SUGGESTIONS......................................................................................................................9
CHARACTERISTICS - INSTALLATION.............................................................................................................................10
USE.......................................................................................................................................................................................12
MAINTENANCE....................................................................................................................................................................13
2
2
Page 3
EN
The Instructions for Us e a pply t o seve ral versio ns of this appl ianc e. Ac cor
d-
RECOMMENDATIONS AND SUGGESTIONS
ingly, you may fin d descriptions of indi vidual features that d o not apply to
your specific appliance.
INSTALLATION
• The manufacturer will not b e held liable for any dam ages resulting fr om incorrect or i mpr op er in sta l lat ion .
• The minimum safety distance between the cooker top and the extractor
hood is 650 mm (som e m od el s can be installed at a lower height, please re fer to the paragraphs on working dimensions and installation).
• Check th at the mains voltage corres ponds to that indicated on the rating
plate fixed to the inside of the hood.
• For Class I appliances, check th at the domestic power supply guarantees
adequate earthing.
Connect the extractor t o the ex haus t flu e throu gh a pipe o f mi nimum diame-
ter 120 mm. The route of the flue must be as short as possible.
• Do not conn ect the extractor hood to exhaus t ducts carrying combustion
fumes (boilers, fireplaces, etc.).
• If the ext ra ctor is used in conjunctio n wi t h no n- el ec tri c al a ppliances (e.g. gas
burning applia nces), a suffi cient degree of aeration must be guarantee d in
the room in order to prevent t he backfl ow of exha ust gas. T he kitch en must
have an opening communicating directly with the open air in order to
guarantee the entry of clean air.
USE
• The extractor hood has been designed exclusively for domestic use to eliminate kitchen smells.
• Never use the hood for purposes other than for which it has been designed.
• Never leave high naked fla me s un der the ho od wh en it is in oper at i on.
• Adjust th e fl am e i n te nsity to direct it onto the bo ttom o f t he pan only, making
sure that it does not engulf the sides.
• Deep fat fryers must b e continuously m onitored durin g use: overheate d oil
can burst into flames.
• Do not flambè under the range hood; risk of fire
• This appliance is not intended for use by persons (includi ng children) with
reduced physical , sensory or mental capabilitie s, or lack of ex perience and
knowledge, unless th ey have been g iven su pervi sion o r in structi on con cern ing use of the appliance by a person responsible for their safety.
• Child re n sh ould be supervised to ensure that they do not pl a y wi th t he appliance.
MAINTENANCE
• Switch off or unplug the applian c e fr om the m ains supply before carryin g ou t
any maintenance work.
• Clean and/or replace the Filters after the specified time period (Fire hazard).
• Clean the hood using a damp cloth and a neutral liquid detergent.
The symbol on the product or on its packaging indicates that this product may not be treated
as household waste. Instead it shall be handed over to the applicable collection point for the
recycling of electrical and electronic eq uipment. By en s uring this pro d uc t i s disposed of c or rectly,
you will help prevent potential negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste handling of this product. For more
detailed information about recycling of this product, please contact your local city office, your
household waste disposal service or the shop where you purchased the product.
9
9
Page 4
EN 110
CHARACTERISTICS - INSTALLATION
FIXING OF THE HOOD UNDER THE CABINET
• To drill the cabinet follow the indications given in the dimensional drawing in the chapter which regards hood dimensions.
• To fix the hood onto the cabinet use th e 44,4 mm long screws
inserting and tightening them from the inside of the cabinet.
Connection to air outlet
AIR OUTLET IN THE DUCTING MODE
When installing the hood in ducting version, basing on the installer’s choice, a rigid or a flexible pipe is used in order to connect the hood to the ai r outlet piping.
• Insert the flange on the ho od body outlet.
• Open the metal grid and make su re that the con version knob is
in the ducting position.
• Connect the hood to the air outlet piping with a pipe.
• Fix the pipe with an adequate quantity of pipe clamps. This
material is not supplied together with the hood.
• Remove the charcoal filter if present.
Page 5
EN 111
AIR OUTLET IN THE RECYCLING MODE
• Open t he metal grid and make sure that th e conversion knob is in the recycling position.
• Place the charcoal filter. The charcoal filter is not
supplied together with the hood. (Hoods with two
motors needs to be equ ipped with two charcoal filters).
INSTRUCTIONS FOR OPENING AND REMOVING THE
METAL GRILLE PANEL
• To open the grille, pull the facia panel out into the
operating position.
• Press inwardly on the two slide catch fastners, located at each side of the grille near the facia panel,
while pulling the grille panel onwards. The grille
may then pivot down.
• To remove the grille, release the right hand hinge pin
from the slot along the casing and the grille can be
removed.
ELECTRICAL CONNECTION
• Connect the hood to the mains through a two-pole switch having a contact gap of at least 3
mm..
Page 6
EN 112
USE
Control board
1 Lighting On/off lighting system.
2 Motor On/off motor.
3 Speed Speed control:
1. Minimum speed, particularly silent, continuous air exchange, suitable in pres-
2. Medium speed, due to an optimum relation between hood extraction capacity
3. Maxim um sp eed, su itab le for t he cook in g cond itio ns when vap ours an d smells
OPTIONAL
4 Microswitch Microswitch, which is activated by the movement of the visor. It switches on and
5 Led Led indicating when the motor is on.
ence of only few cooking vapours and odours.
and the noise level, it is suitable for mo st of the cooking conditions.
are of the utmost emission even for a longer time.
off the hood basing on the conditions which have been earlier established with
the sliders of the control panel.
Page 7
EN 113
MAINTENANCE
GREASE FILTER
Regular maintenance and cleaning will ensure good performance
and reliability, while extending the working life of the hood. Special attention should be taken to keep the grease filter clean at all
times and the charcoal filter (recirculation model) should be replaced regularly. To remove filters for subsequent cleaning and
replacement first open the metal grille panel.
This retain the solid grease particles. It is fitted onto the reverse
side of the lower grille panel and can be either of a synthetic material or metallic. Maintenance of the grease filter varies acco rding to the type used: synthetic grease filters should not be washed
and should be rep laced every t hree month s. The metal grease filters should be washed once a month in hot water using mild detergent or liquid soap. It should not be bent and should be left to
dry before being refitted. The filter is easily removed from grille
by pushing the spring wire clips to one side and removing.
CHARCOAL FILTER
In the recycling mode the charcoal filter absorbs smells and
odours. The charcoal filter cannot be cleaned and should be replaced at least every si x mon ths o r more frequ ently if the hood is
used consistently.
To replace the charcoal filter, support the filter with one hand,
remove the round disk through the centre of the charcoal filter
and rotate it till the filter will come away .
Replace by reversing the operat i on.
WARNING! It is a possible fire hazard if the filters are not
cleaned and replaced as recommended.
Page 8
EN 114
WORKTOP ILLUMINATION
If a lamp fails to function at any time, open the metal grille panel
and check that the lamp is fully screwed into the holder.
When changing the lamp, an identical replacement must be fitted
to ensure a safe working of the hood.
CLEANING
The metalwork should be cleaned regularly, at least once a month, using household cleaners
and polish. Never use abrasives.
Loading...