Smeg K7588ASC Quick Start Manual
K7588ASC
90cm rangehood, wall mount, stainless steel and crystal glass, ASC tted
dimensions
900mm W x 500mm D x 1235mm H maximum
nish
satin stainless steel & crystal glass
installation
wall mount
motor
250 watt centrifugal, twin impellors, double-sided air uptake
capacity
7503m/hr net
noise rating
40–59 dBA
extraction
NB
• direct duct to atmosphere, 150mm diameter ducting required
• recirculate to kitchen, 125mm diameter ducting required
— 150/125mm diameter ducting adaptor supplied
— recirculation diverter kit supplied
illumination
two 20 watt halogen, separate ON/OFF button
speeds
four — separate buttons
asc
sensor control, separate button & LED
delay stop
five-minute delay stop, fan and lights
cleaning
prompt
• 30-hour prompt to inspect grease lters
• 120-hour prompt to inspect charcoal lter
ltration
two stainless steel and aluminium 4-ply grease lters, removable
option
activated charcoal lter cartridge for optional tment to
recirculation installation, part number 08999802
warranty
two years parts and labour
ASC
Automatic Sensing Control — by selecting this button, the K7588
ASC automatically senses any vapours, smoke and odours
caused by the cooking process and adjusts the speed of air
extraction accordingly. The ASC will also sense and capture any
abnormal presence of gas.
PERFORMANCE
Highly-efcient air extraction of up to 750 cubic metres an hour
true (net) ensures the very swift removal of cooking vapours,
odours and heat. The higher speed selections are perfect for
the more vigorous styles of cooking such as stir frying, griddle
cooking and boiling, the lower speeds at the touch of a button
are perfect for simmers.
QUIETNESS
40 to 59 dBA. The motor/impellor encasements are smoothwalled to minimise air drag and, hence, noise. All metal joins are
welded to reduce vibration.
SAFETY
Thermal overload protection on motor, re retardant hardened
metal and mesh, VO self-extinguishing plastic for motor housing
and internal ue.
MAINTENANCE
No tools required — easy lift-out pair of grease lters for washing.
For light replacement, simply rotate the decorative ange for
access to halogen globes.
DUCTING
Direct ducting to atmosphere ensures the maximum removal
of grease/oil/particle-laden vapour plus the odours and, very
importantly, the heat, resulting in a cleaner, cooler, more
comfortable work area.
RECIRCULATION
When the cooking vapours cannot be ducted to atmosphere, the
ltered air can simply be redirected back into the kitchen via a duct
pipe through the overhead cabinetry.
CHARCOAL FILTERS
These are purchasable accessories. One each is clipped to either
side of the centrifugal motor and are designed to absorb and
diminish cooking odours. Periodic inspection is recommended
before replacement. They are optionally used for recirculation only.
The activated charcoal lters are not to be washed.
DUCTING MATERIAL
Smooth internal walled duct pipe lengths ensure the most efcient
air movement and quieter operation. Consider either high
temperature rated PVC or galvanised sheet metal piping. The
exible ducting cab be ideal for a very short, tight run.
The rangehood’s air exit aperture is designed for 150mm (6”)
ducting; however, a 125mm diameter (5”) adaptor can be
purchased for optional use.
DELAY STOP
Ideally, a rangehood should run for several minutes after all cooking
is ceased in order to drag through residual vapours and odours.
By selecting the delay stop button at the end of the cooking, the
rangehood will turn the motor off in ve minutes as well as the lights if
they were left on.
CLEANING PROMPT
After 30 hours use the LED window will prompt visually to inspect the
grease lters for possible cleaning. Simply use the Reset button to
clear the LED window.
ID040608
code K7588ASC
WARNING: technical specications and product sizes can be varied by the manufacturer without
notice. Cutouts for appliances should only be by physical product measurements. The above
information is indicative only.
NB: drawings are not to scale — they are to assist only
electricity supply
240 volt, 50 Hz
electrical
connection
0.85 metre connected power cord for
plugging to standard 10 amp GPO
wattage
250 watt, 2 x 20 watt halogen globes, 290
watts total
current
1.21 amps
packaged
dimensions
1040mm x 670mm x 640mm = 0.45m³
gross weight
36.35 kg
net weight
29.10 kg
supplied
• instructions for installation, operation,
maintenance
• screws and wall bracket
• 150/125mm diameter ducting adaptor
• recirculation diverter kit
optional
activated charcoal lter cartridge to
slot below the centrifugal motor in the
recirculation installation, part number
08999802
K7588ASC
90cm rangehood, wall mount, stainless steel and crystal glass, ASC tted
ID040608
code K7588ASC
SPEED 1 2 3 4
net air capacity m
3
/hr
300 470 630 750
pressure mm H20
34 41 45 46
wattage
125 160 200 250
noise dBA
40 49 56 59
direct ducting to atmosphere
recirculation to kitchen
253
278
chimney plan detail
PLEASE NOTE the difference in maximum heights between the ‘direct
duct to atmosphere’ installation and the ‘recirculation’ installation.
The recirculation installation’s maximum height is 1235mm due to the
active recirculation vents necessarily being exposed on each side of
the chimney. The ‘direct duct to atmosphere’ installation shows the now
redundant recirculation vents being concealed by the lower chimney by
reversing — that is, turning the upper chimney piece 180 degrees on the
vertical.
If a higher chimney height is required for the ‘direct duct to atmosphere’
installation, that is, up to 1235mm, simply follow the ‘recirculation’
installation and have the recirculation vents exposed, though redundant.
Loading...