Smeg FR138A User Manual
Operating Instructions
FRIDGE
I
Italiano, 1
D
Deutsch, 25
FR 138 A
GB
English, 9
F
Français, 17
Contents
GB
Installation, 10
Positioning and connection
Description of the appliance, 11
Overall view
Start-up and use, 12
Starting the appliance
Using the refrigerator to its full potential
Using the freezer to its full potential
Maintenance and care, 13
Switching the appliance off
Cleaning the appliance
Avoiding mould and unpleasant odours
Defrosting the appliance
Replacing the light bulb
Precautions and tips, 14
General safety
Disposal
Respecting and conserving the environment
Troubleshooting, 15
Assistance, 16
Installation
GB
! Before placing your new appliance into operation
please read these operating instructions carefully.
They contain important information for safe use, for
installation and for care of the appliance.
! Please keep these operating instructions for future
reference. Pass them on to possible new owners of the
appliance.
Positioning and connection
Positioning
1. Place the appliance in a well-ventilated humidityfree room.
2. Do not obstruct the rear fan grills. The compressor
and condenser give off heat and require good
ventilation to operate correctly and save energy.
3. Ensure the appliance is away from any sources of
heat (direct sunlight, electric stove, etc.).
Electrical connections
After the appliance has been transported, carefully
place it vertically and wait at least 3 hours before
connecting it to the electricity mains. Before inserting
the plug into the electrical socket ensure the following:
The appliance is earthed and the plug is compliant
with the law.
The socket can withstand the maximum power of the
appliance, which is indicated on the data plate
located on the bottom left side of the fridge (e.g. 150
W).
The voltage must be in the range between the
values indicated on the data plate located on the
bottom left side (e.g. 220-240V).
The socket is compatible with the plug of the
appliance.
If the socket is incompatible with the plug, ask an
authorised technician to replace it (see Assistance).
Do not use extension cords or multiple sockets.
! Once the appliance has been installed, the power
supply cable and the electrical socket must be easily
accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced
by authorised technicians only (see Assistance).
! The manufacturer declines any liability should
these safety measures not be observed.
10
Description of the
appliance
Overall view
The instructions contained in this manual are applicable to different model refrigerators. The diagrams may not
directly represent the appliance purchased. For more complex features, consult the following pages.
Compartment for
MAKING ICE
TEMPERATURE
control
Removable lidded
shelf with EGG TRAY
and BUTTER DISH
Removable
multipurpose
SHELVES
GB
*
SHELVES
FRUIT and
VEGETABLE
crisper
BOTTLE shelf
Varies by number and/or position.
Available only on certain models.
*
11
Loading...