INSTRUCTIONS FOR USE
DESCRIPTION OF THE APPLIANCE
BEFORE USING THE APPLIANCE
SAFEGUARDING THE ENVIRONMENT
PRECAUTIONS AND GENERAL
RECOMMENDATIONS
INSTALLATION
HOW TO OPERATE THE REFRIGERATOR/
FREEZER
FREEZING
USE OF THE ICE AND WATER
DISPENSER (ON SOME MODELS)
USE OF THE DISPENSER LIGHT AND
DISPENSER LOCK (ON SOME MODELS)
AUTOMATIC ICE MAKER
COMMON ICE MAKER PROBLEMS
MAINTENANCE AND CLEANING
VACATION
TROUBLESHOOTING GUIDE/AFTER-SALES
SERVICE
WATER FILTRATION AND MONITORING
SYSTEM (ON SOME MODELS)
DISPOSAL OF YOUR OLD REFRIGERATOR
ELECTRICAL CONNECTION
DESCRIPTION OF THE APPLIANCE
Freezer Compartment
Automatic ice maker
S.
Grids
T.
Bottom basket (on some models)
U.
Top basket
V.
Ice cube bucket
W.
Freezer inner door insert
X.
Freezer inner door door tray
Y.
Top inside light (and bottom inside light on
Z.
some models)
Refrigerator Compartment
Inside light
A.
Midway light (on some models)
B.
Adjustable shelf
C.
Drawer lid
D.
Drawer (on some models)
E.
Crisper drawer
F.
Crisper drawer adjustment
G.
Meat drawer
H.
Meat drawer adjustment
I.
Compartment
L.
Door tray (with bottle holder on some
M.
models)
2 litre door tray (with bottle holder on some
N.
models)
0.75 litre door tray
O.
Tray divider (on some models)
P.
Egg tray
Q.
Water filter (on some models)
R.
29
BEFORE USING THE APPLIANCE
Your new appliance is designed
•
exclusively for domestic use
To get the most out of your new
appliance, read the user handbook
thoroughly. The handbook contains a
description of the appliance and useful
tips for storing food.
Keep this handbook for future
consultation.
After unpacking, make sure that the
1.
appliance is undamaged and that the door
closes properly. Any damage must be
reported to your dealer within 24 hours
after delivery of the appliance.
Wait at least two hours before switching
2.
the appliance on in order to ensure the
refrigerant circuit is fully efficient.
Installation of the appliance and electrical
3.
connections must be carried out by a
qualified electrician, in accordance with the
manufacturer's instructions and local
safety regulations
Clean the inside of the appliance before
4.
using it.
SAFEGUARDING THE ENVIRONMENT
1.Packing
The packaging material is entirely
recyclable, and marked with the recycling
symbol. Follow local regulations for
scrapping. Keep the packaging materials
(plastic bags, polystyrene parts, etc.) out of
reach of children, as they are potentially
dangerous.
2.Scrapping
The appliance is manufactured using
recyclable material.
This appliance is marked according to the
European directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of
correctly, you will help prevent potential
negative consequences for the environment
and human health, which could otherwise
be caused by inappropriate waste handling
of this product.
The symbol on the product, or on the
documents accompanying the product,
indicates that this appliance may not be
treated as household waste. Instead it shall
be handed over to the applicable collection
point for the recycling of electrical and
electronic equipment.
Before scrapping, make the appliance
unusable by cutting off the power cable and
removing the doors and shelves so that
children cannot easily climb inside the
appliance.
Disposal must be carried out in accordance
with local environmental regulations for
waste disposal. Deliver the appliance
immediately to an authorized dump; do not
leave it unattended even for a few days,
since it is potentially dangerous for children.
For more detailed information about
treatment, recovery and recycling of this
product, please contact your local city office,
your household waste disposal service or
the shop where you purchased the product.
Information:
This appliance does not contain CFCs
(replaced with R134a) or HFCs (replaced
with R600a).
Appliances with Isobutane (R600a):
isobutane is a naturally occurring, low
environmental impact gas. Caution is
required, however, because isobutane is
flammable. Therefore, it is essential to ensure
that refrigerant pipelines are not damaged.
Declaration of conformity
This appliance is designed to store food
•
and is manufactured in conformity with
EEC directives No. 90/128/EEC,
02/72/EEC and European regulation
EC 1935/2004.
This appliance is designed,
•
manufactured, and retailed in compliance
with:
- the safety objectives of the Low Voltage
Directive 73/23/EEC;
- the protection requirements of the “EMC”
Directive 89/336/EEC, amended by Directive
93/68/EEC;
The electrical safety of the appliance can
•
only be guaranteed if the product is
connected to an approved earth
connection.
30
PRECAUTIONS AND GENERAL
RECOMMENDATIONS
Use the refrigerator compartment only for
•
storing fresh food and beverages and use
the freezer compartment only for storing
frozen food, freezing fresh food and
making ice cubes.
After installation, make sure that the
•
appliance is not standing on the power
supply cable.
Do not store glass containers with liquids
•
in the freezer since they may burst.
Do not eat ice cubes or ice lollies
•
immediately after taking them out of the
freezer since they may cause cold burns.
Before carrying out any maintenance or
•
cleaning, always unplug the appliance or
disconnect the power supply.
Make sure that your appliance is not near
•
a heat source.
Do not store or use gasoline or other
•
flammable vapours and liquids in the
vicinity of this or any other appliance. The
fumes can create a fire hazard or
explosion.
To ensure proper ventilation, leave a gap
•
on both sides and above the appliance.
Ensure that the vent outlets on the
•
appliance casing or housing unit are
unobstructed in order to allow correct air
circulation.
All appliances equipped with an ice maker
•
or water dispenser must be connected to
a mains water supply that delivers potable
water only (with water pressure between
1.7 and 8.1 bar (25 and 117 PSI)). Ice
makers and/ or water dispensers not
directly connected to a mains water
supply must be filled with potable water
only.
Install and level the appliance on a floor
•
strong enough to take its weight and in an
area suitable for its size and use.
Install the appliance in a dry and well-
•
ventilated place The appliance is set for
operation at specific ambient temperature
ranges, according to the climatic class
indicated on the data plate: The appliance
may not work properly if it is left for a long
period at a temperature above or below
the indicated range.
Climatic class Amb. T. (°C) Amb. T. (°F)
SN From 10 to 32 From 50 to 90
N From 16 to 32 From 61 to 90
ST From 18 to 38 From 64 to 100
T From 18 to 43 From 64 to 110
Be careful not to damage the floors when
•
you move the appliance (e.g. parquet
flooring).
Do not use mechanical devices or any
•
means other than those recommended by
the manufacturer to speed up the
defrosting process.
Do not damage the refrigerant circuit.
•
Do not use electrical appliances inside the
•
freezer compartments, unless such
appliances are specifically recommended
by the manufacturer.
This appliance is not designed for use by
•
young children or the infirm.
To avoid the risk of children being trapped
•
and therefore suffocating, do not allow
them to play or hide inside the appliance.
The power cable may only be replaced by
•
an authorized person.
Do not use extension leads or adapters.
•
It must be possible to disconnect the
•
appliance from the mains by unplugging it
or by means of a two-pole switch fitted
upline of the socket.
Ensure that the voltage indicated on the
•
appliance data plate corresponds to the
domestic supply voltage
Do not ingest the contents (non-toxic) of
•
the ice packs (if provided).
31
INSTALLATION
Make sure that your refrigerator is not near a heat source.
•
Install it in a dry and well ventilated room.
•
To ensure proper ventilation leave a 1 cm space on both sides and above the refrigerator.
•
Clean the inside of the refrigerator before using it.
•
Let the refrigerator stand (don’t move it) for at least one hour before connecting it to the power
•
supply.
The appliance should be connected to a water supply that delivers drinkable or chemically
•
purified water.
Install and level the refrigerator on a floor strong enough to take its weight and in an area
•
suitable for its size and use.
Do not use the refrigerator in an area where the room temperature may fall below 13°C.
•
Be careful not to damage the floors when you move the appliance (e.g. parquet flooring).
•
32
HOW TO OPERATE THE
REFRIGERATOR/FREEZER
Connect the appliance to the water supply and power
•
supply (see Installation manual).
When the appliance is connected to the power supply,
•
two hyphens will appear on the freezer display until the
optimal temperature is reached. The refrigerator display
will show a temperature of 5° C (factory set).
When the appliance is warm, the red alarm LED will blink
•
and the acoustic alarm will sound, indicating that the
appliance has not yet reached the optimal temperature
for storage of foodstuffs.
Press the Reset button to stop the acoustic alarm.
•
The red LED will stop blinking when the freezer
•
compartment reaches a sufficiently low temperature for
food storage. At this point it is possible to store food into
the freezer compartment.
After being switched on, the refrigerator needs 2/3 hours
•
to reach the correct temperature to store a typical
volume of food in the refrigerator compartment.
IMPORTANT
the appliance has cooled completely, it may deteriorate.
Turning the refrigerator and freezer controls to a cooler
than recommended setting will not cool the compartments
any faster.
Do not place food near the air vents in the refrigerator
•
compartment.
A built-in exterior moisture control continuously guards
•
against moisture build-up on the front edges. Do not be
alarmed if these edges sometimes feel warm to the
touch.
The inside light switches on when both doors are opened.
•
: If food is placed in the refrigerator before
33
Guide to the refrigerator/freezer and ice/water dispenser control panel
Standby
When button is pressed, the appliance switches to
standby. This function deactivates both the refrigerator
and freezer compartments.
When the standby function is activated, two green dots will
appear on both of the displays.
To restore the previous setting, carry out the same
procedure until the previous temperatures appear on
both of the displays.
When the appliance is on standby the light inside the
refrigerator compartment is off.
Remember that this operation does not disconnect the
appliance from the power supply.
Fast freezing
This function must be activated before freezing fresh
food.
To activate the function press the specific button (yellow
LED lights up). The function switches off automatically
after 24 hours or manually by pressing the button again.
When this function is activated, the meat drawer slider
must be set to “vegetables”.
Freezer compartment display
Shows the freezer compartment temperature setting.
The set T° is stored and will automatically be restored
even after a power failure or if the appliance is switched
off by pressing the standby button.
Freezer compartment temperature selection and
control
To change the internal temperature press buttons
until the desired value is reached and shown on the
display.
Refrigerator compartment display
Shows the refrigerator compartment temperature
setting.
The set T° is stored and will automatically be restored
even after a power failure or if the appliance is switched
off by pressing the standby button.
Refrigerator compartment temperature selection and
control
To change the internal temperature press buttons
until the desired value is reached and shown on the
display.
Fast cooling
Switches on the Fast Cooling function and shows its
operating status. Use this function to chill the fresh food
stored in the refrigerator compartment rapidly. The
function switches on when the button (yellow LED) lights
up and switches off automatically after 6 hours or
manually by pressing the button again.
34
Guide to the refrigerator/freezer and ice/water dispenser control panel
Vacation
This function turns off the refrigerator compartment if
you are going away for some time. To activate the
function press button (yellow LED lights up).
T° disappears from the display and a green dot
appears. To turn on the refrigerator compartment, press
button
Important:
After activating this function remove perishable food from the
refrigerator compartment and keep the door closed.
Freezer/Refrigerator Door Open Indicator Light
The refrigerator or freezer door symbol lights up (green
LED) when one or both of the doors are opened.
Alarms
In the event of an alarm, the acoustic alarm and
indicator lights are activated.
To switch off the acoustic alarm press button .
Freezer T° alarm
The acoustic alarm will sound and the red LED will
blink, T° disappears from the display and two hyphens
appear.
The alarm is activated when:
•
The appliance is connected to the power supply for the
first time or after prolonged disuse.
•
The freezer compartment T° is too high.
•
The quantity of foods loaded into the freezer exceeds
that indicated on the data plate.
•
The freezer door has been left open for a long time.
Power failure alarm
The maximum T° reached during a power failure blinks on
the freezer display.
The red alarm LED lights up and the acoustic alarm
sounds at the same time.
The alarm is activated when:
•
A prolonged power failure takes place, causing the
internal temperature of the freezer to increase to values
that cannot guarantee safe storage of food.
To disable the alarm:
•
Press the reset button .
•
The display will show the preset temperature.
Note
Check the state of the food in both compartments
before refreezing or using it!
Operation alarms
If the acoustic alarm sounds and letters appear on the
display, call the After-sales Service.
again.
35
Guide to the refrigerator/freezer and ice/water dispenser control panel
Freezer/Refrigerator Door Open Alarm
The refrigerator or freezer door symbol (or both) blinks
(green LED), the acoustic alarm sounds and the red
LED lights up.
The alarm is activated when:
•
One or both of the doors are left open for more than
2 minutes. If the door is not closed, the acoustic alarm
will sound again after two minutes.
To stop the alarm:
Close the door/s or press the reset button .
Control panel lock function
This function prevents anyone from inadvertently
changing settings or switching off the appliance.
•
To lock the panel, press the fast freeze button on
the left hand side of the control panel and the fast
cooling button on the right hand side of the control
panel simultaneously for about 3" until the yellow LED
lights up and the acoustic signal sounds.
•
To unlock the control panel, carry out the same
operation until the yellow LED turns off.
36
Guide to the refrigerator/freezer and ice/water dispenser control panel
Ice maker on/off
This function enables/disables the production of ice.
To dispense ice
The function is activated when the symbol is alight.
Press the button to select the desired type of ice (cubes
or crushed). The symbol will light up (yellow LED).
Light
The dispenser has a night light. This feature can be
enabled / disabled by pressing the specific button or
one of the two dispenser levers (water, ice).
Ice maker control panel lock
The ice/water dispenser can be turned off for easy
cleaning or to prevent accidental dispensing by children
and pets.
To lock the control panel, press buttons “Icemode”
and simultaneously for 3” until the symbol
lights up and the acoustic signal sounds.
If any button is pressed when the control panel is
locked, an acoustic signal will sound and the yellow
LED will blink.
To unlock the control panel, repeat the operation.
Note
: The lock feature does not shut off power to the
appliance, to the ice maker or to the light. It simply
deactivates the dispenser levers.
37
Guide to the refrigerator/freezer and ice/water dispenser control panel
Water filter indicator light function (if present)
The water filter indicator light indicates when to change
the water filter cartridge.
When the light changes from green to yellow, this
means that it is almost time to change the water filter
cartridge (90% of the filter life has been used).
The water filter cartridge should be replaced when the
water filter indicator light changes to red.
After changing the water filter cartridge, reset the water
filter indicator light by pressing the corresponding
switch for 3 seconds.
The indicator light will change from red to green when
the system is reset.
Dispensing water
To dispense water press a glass against the water
dispenser lever and to stop dispensing remove the
glass; the light inside the dispenser turns on
simultaneously and turns off when the lever is released.
Hold the edge of the glass close to the dispenser opening
so water does not spill out of the glass. The water tank is
located in the refrigerator compartment behind the two
lower drawers.
Note:
Pressing hard will not make the water dispenser
operate faster or produce greater quantities.
38
Removal and rearrangement of the refrigerator and
freezer shelves
The shelves may be positioned to suit your particular
requirements.
The glass shelves are strong enough to hold bottles, milk
cartons and heavy food; nonetheless, avoid banging these
down on the shelves.
To remove the shelves:
Slide the shelf out until it stops, then lift it up and remove it.
Removal of the fruit and vegetable drawer or the meat
drawer:
Slide the drawer out until it stops;
•
With one hand underneath the drawer, lift it and pull it out;
•
The drawer will come out of its runners and can be pulled
•
out further;
To remove completely, the drawer will need to be
•
rotated: front end up, back end down.
To remove the glass cover of the drawer
Lift the front of the frame 10 cm, then with your other
•
hand, lift the back of the frame and pull it out.
To replace the glass cover of the drawer
Insert the back of the frame in the supports on the
•
refrigerator walls and lower it back into place.
Meat drawer temperature control
The cold air flows into the meat drawer through an opening
•
between the refrigerator and the freezer compartment. In
this way the temperature inside the meat drawer is lower
than in other parts of the refrigerator. Set the slider for
higher or lower airflow.
If you wish to store vegetables in the meat drawer, move the
•
control all the way to the left to the vegetables setting. This
avoids possible frost damage to the vegetables.
When the fast freeze function is activated, the slider
•
must be set to “vegetables”.
39
Fruit and vegetables drawer moisture control
The control may be set to any position between LOW
•
and HIGH .
excludes damp air from the drawer for better
•
preservation of fruit and vegetables with peel.
keeps damp air inside the drawer for better
•
preservation of leafy vegetables.
Removal of the freezer compartment drawers
Slide the drawer outwards until it stops.
•
Lift the front to release the drawer from the retainer.
•
Pull out the drawer completely.
•
Removal of the ice storage bucket
Press the button located on the bottom side of the ice
•
storage bucket.
Lift the bucket up, remove from the base and empty it.
•
Replace the bucket in its seat in the freezer
•
compartment inner door.
40
FREEZING
The freezer compartment, marked with the symbol ,
is used for storing frozen food and freezing fresh or cooked
food. It can also be used for making ice cubes.
The inner door of the freezer, marked with the symbol **,
is especially suitable for storing ice cream or frozen food
with short storage time.
The maximum quantity of food which can be frozen in a 24
hour period, at an ambient temperature of 25°C, is stated
on the rating plate, inside the refrigerator.
For more efficient freezing, pre-freeze by pressing the fast
freeze button . After 24 hours place the food to be
frozen on the top shelf of the freezer compartment.
Freezing of fresh food and automatic ice making cannot be
carried out at the same time.
Therefore do not forget to stop the automatic ice maker by
pressing the On/Off button, located on the front panel of
the water and ice dispenser.
See the operating instructions in chapter “Automatic ice
•
maker”.
When the fast freeze function is activated, the slider
•
must be set to “vegetables”.
41
USE OF THE ICE AND WATER DISPENSER
(ON SOME MODELS)
Your freezer dispenses both cubed and crushed ice. When
the appliance is switched on, the ice maker is activated
and set to the “Ice cube” function. Its symbol lights up
(yellow LED). For crushed ice, press the crushed ice
button until the symbol lights up. The button controls are
designed for easy use and cleaning.
To dispense ice:
Press the button for the desired type of ice.
1.
Press a sturdy glass against the ice dispenser lever.
2.
Hold the glass close to the dispenser opening so ice
does not fall outside of the glass.
You do not need to apply a lot of pressure to the lever in
3.
order to activate the ice dispenser. Pressing hard will not
make the ice dispenser operate faster or produce
greater quantities of ice.
To stop dispensing, remove the glass slowly so ice does
4.
not fall outside of the glass.
Do not use a fine, fragile glass to collect ice.
5.
NOTE:
The first few batches of ice cubes may have an off-taste;
Throw this ice away.
Ice is dispensed from the automatic ice maker bucket in
the freezer compartment. When the outside dispenser bar
is pressed, a trapdoor opens between the ice bucket and
the dispenser. When the glass is taken away from the
dispenser bar, the trapdoor closes.
The dispenser will not operate when the freezer
compartment door is open.
Large amounts of ice cubes should be taken directly from
the bucket, not through the dispenser.
For crushed ice, cubes are crushed before being
dispensed. This may cause a slight delay in dispensing
crushed ice. Noise from the ice crusher is normal, and
pieces of ice may vary in size.
When changing from crushed ice to ice cubes, a small
quantity of crushed ice will be dispensed along with the
first cubes.
After starting the appliance, it generally takes overnight
before the first ice cubes are ready.
If the dispenser does not dispense ice when you press
•
the bar, change the ice selection from ice cubes to
crushed ice or vice versa, (see figure) so as to remove
any ice blocks.
If the dispenser still does not dispense ice, wait two
•
minutes and repeat this operation.
If there is condensation in the ice/water dispenser area,
•
press the corresponding button (marked A in the figure)
to activate the anti-condensation device.
42
To dispense water:
After the water dispenser has been switched on, throw the
first glasses of water away, then the water can be used.
Repeat this operation whenever water has not been
dispensed for a long time.
You do not need to apply a lot of pressure to the lever in
order to activate the dispenser. Hold the edge of the glass
close to the dispenser opening. Remove the glass slowly
so water does not spill out of the glass.
Pressing hard will not make the water dispenser operate
faster or produce greater quantities.
USE OF THE DISPENSER LIGHT AND
DISPENSER LOCK (ON SOME MODELS)
The dispenser area has a night light.
It can be turned on and off by pressing the button located
at the centre of the panel.
Your dispenser can be turned off for easy cleaning or to
prevent accidental dispensing by small children and pets.
To switch the dispenser off, press button until
symbols turn off.
To switch the dispenser on again, repeat the operation.
The ice maker will automatically switch off when it finishes
making ice.
To turn off the water/ice dispenser, press the light
button and the ice selection button
simultaneously.
The light will automatically switch off when the control
panel Lock function is activated.
NOTE:
The lock feature does not shut off power to the appliance, to
the ice maker or to the light. It simply deactivates the
dispenser levers.
43
AUTOMATIC ICE MAKER
On/Off
Useful hints on the automatic ice maker
To turn the ice maker on/off, press the On/Off button .
If the freezer compartment door is open, make sure the
inside flap is not blocked as it serves as lock sensor that
shuts off the transfer of ice from the automatic ice maker
into the bucket installed in the door.
To remove and replace the ice bucket:
Place four fingers in bucket base opening and rest thumb
1.
on the release button.
Holding the base of the bucket with both hands, press
2.
the release button and lift the bucket up and out. It is not
necessary to turn the ice maker control to the OFF
position. The ice maker will not produce ice without the
bucket installed in the door.
• Normal Ice Production
7 to 9 batches of ice in a 24-hour period.
should produce approximately
Ice bucket care:
Empty the bucket. Use warm water to melt the ice if
1.
necessary.
in the bucket. This can cause damage to the ice bucket and
the dispenser mechanism.
Wash the ice bucket with a mild detergent, rinse well and
2.
dry thoroughly.
Do not use harsh or abrasive cleaners or solvents.
NOTE
the water supply.
It is normal for ice cubes to be stick together at the
•
corners. They can be separated easily.
The ice maker will not operate until the freezer compartment
•
is cold enough to make ice.
This can take overnight.
Good water quality is important for good ice quality.
•
Water softener chemicals such as salt can damage the
ice maker and lead to poor quality ice.
44
Never use anything sharp
: Do not turn the ice maker on until it is connected to
to break up the ice
COMMON ICE MAKER PROBLEMS
PROBLEM CAUSE SOLUTION
The dispenser does not work. The freezer compartment
door is open.
Close the freezer
compartment door.
The ice bucket is not properly
installed.
The ice dispenser stops
working.
Off-taste or odour to ice. Ice absorbs airborne odours.
The dispenser has not been
used for extended periods,
causing the ice cubes to melt
together.
The ice dispenser lever has
been held in for too long.
Water quality.
Food not properly wrapped.
The ice bucket and the
freezer compartment may
need cleaning.
Make sure that the bucket is
pushed all the way in.
Shake the bucket
occasionally to keep cubes
separate and to increase
storage capacity. Throw old
ice cubes away and make a
new supply.
Wait about 3 minutes for the
dispenser motor to reset.
Large amounts of ice should be
taken from the bucket, not
through the dispenser.
New ice should be made.
Throw old ice away and
make a new supply.
Store excess ice in a covered
container.
Water containing minerals
may require a filter.
Wrap food properly.
Clean the ice bucket and the
freezer.
Follow instructions for a
proper water supply to ice
maker.
: Only use cubes from the ice maker.
NOTE
Plumbing connections to ice
maker.
The first few batches of ice
from a new ice maker may
have an off-taste. Throw the
first few batches away and
make a new supply.
45
MAINTENANCE AND CLEANING
Before any cleaning or maintenance operation, unplug the
appliance from the mains or disconnect the electrical
power supply.
Periodically clean the refrigerator and freezer
compartments with a sponge dampened in a solution of
lukewarm water and vinegar. Rinse and dry. Never use
detergents or abrasives. Never clean refrigerator parts
with flammable fluids. The fumes can create a fire hazard
or explosion.
Clean the outside with a sponge dampened in lukewarm
water.
Dry with a soft cloth.
Do not use steam cleaners
•
Clean the condenser and seal.
•
: The refrigeration system pipes are located near the
NOTE
defrost pan and can become hot. Periodically clean them with
a vacuum cleaner.
Always disconnect the refrigerator from the power
supply before replacing any light bulbs.
Removal of the refrigerator light cover:
Loosen the screw that secures the light cover
•
Pull downwards and slide the cover towards the rear of
•
the refrigerator.
Replace the bulb with one of the same type available only
•
from our After-sales Service Centre.
Put the light cover back into place, repeat the above
•
steps in reverse order.
How to replace the freezer upper compartment bulb:
Remove the light shield by pressing the side sections;
•
Remove the bulb and replace it with one of the same type
•
available only from our After-sales Service Centres or
authorized dealers;
Put the light shield back into place, repeat the above
•
steps in reverse order.
How to replace the lower bulb in the refrigerator and
freezer compartments (on some models):
remove the light shield by grasping its upper central part;
•
pull the front and, at the same time, slightly turn the
•
shield to one side;
remove the bulb and replace it with one of the same type
•
available only from our After-sales Service Centres or
authorized dealers.
To replace the light shield:
grasp the upper central part of the light shield;
•
insert the tabs of one side of the shield into the grooves;
•
gently bend the light shield in the centre to insert the tabs
•
on the other side.
How to replace the dispenser bulb (on some models):
grasp the bulb in the dispenser recess;
•
remove the bulb and replace it with one of the same type
•
available only from our After-sales Service Centres or
authorized dealers.
46
VACATION
Short vacation
There is no need to disconnect the refrigerator from the
power supply if you will be away for less than three weeks.
Use up perishable food, freeze other food. If your
appliance has an automatic ice maker:
Turn it off;
1.
shut off the water supply to the ice maker;
2.
empty the ice bucket.
3.
Long vacation
Remove all the food if you are going away for three weeks
or more. If your appliance has an automatic ice maker, turn
off the water supply to the ice maker at least a day before
and as soon as the last batch of ice cubes is produced, turn
off the ice maker. Unplug the refrigerator and clean it, rinse
and dry. Fix some wooden or plastic wedges to the upper
part of both doors with adhesive tape and leave the doors
open enough for air to circulate inside both compartments.
This will prevent odour and mould from setting in.
Moving
Take out all removable parts, wrap them well, and fix
•
them together with adhesive tape so that they do not
bang together or get lost.
Tighten the front levelling screws.
•
Close and fix both doors with adhesive tape and, again
•
using adhesive tape, fix the power cable to the appliance.
Power failure
In the event of a power failure, call the local office of your
Electricity Company and ask how long it is going to last.
In the event of a power cut for maximum 24 hours,
1.
doors of the appliance must be kept closed
allow the stored food to stay cold as long as possible.
Should the power failure last more than 24 hours,
2.
remove all frozen food and put it in a portable freezer
with a key lock. If this type of freezer is not available and,
likewise, no artificial ice packs are available, try to use
up the food which is more easily perishable.
Bear in mind that a full freezer compartment will stay
3.
cold longer than a partially filled one.
Furthermore, a freezer full of frozen meat will stay cold
longer than a freezer filled with pre-cooked food.
If ice crystals are still visible on the food, it may be frozen
again without running any risk, although flavour and
aroma are likely to be affected. If the condition of the
food has deteriorated to the point that refreezing it may
be it risky, throw it away.
both
. This will
47
TROUBLESHOOTING GUIDE/AFTER-SALES
SERVICE
Before calling After-sales Service....
Performance problems often result from simple
things you can find and solve yourself without
tools of any kind.
If your refrigerator does not work
Is the power plug plugged into a live socket
•
with the proper voltage?
Have you checked your home’s fuses?
•
If there are noises or vibrations
Most of the noises are normal. Hard surfaces
like the floor, walls, and cabinets can make the
noises seem louder. The following describes
the most common types of noises and what
may be making them.
• Slight hum
You may be hearing the refrigerator's fan motor
and moving air.
• Clicking noises
The thermostat clicks when the refrigerator
stops running and when it starts. The defrost
timer clicks when the defrost cycle starts and
stops.
• Water noises
When the refrigerator stops running, you may
hear a gurgling noise in the pipes for a few
minutes. You may also hear the defrost water
running into the defrost water pan.
• Ice maker noises
Since your appliance has an ice maker, you
may hear buzzing (from the water valve),
trickling water and the clatter of the ice falling
into the bucket.
If your ice maker does not work:
Has the freezer had enough time to become
•
cold? With a new refrigerator this may take
overnight.
Is the ice maker ON/OFF button set to ON?
•
Is the water turned on? Is water getting to the
•
ice maker?
Is there a water filter installed on the
•
refrigerator?
This filter may be clogged or installed
incorrectly. First, check the filter installation
instructions to ensure that the filter was
installed correctly and is not clogged. If
installation or clogging is not a problem, call
a qualified technician.
If there is water in the defrost pan:
This is normal in hot, damp weather. The pan
•
can even be half full. Make sure the
refrigerator is level so that the water does not
overflow.
If the edges of the refrigerator cabinet, which
come in contact with the door seal, are warm
to the touch:
This is normal in hot weather when the
•
compressor is running.
If the light does not work:
Have you checked your home’s fuses?
•
Is the power plug plugged into a live socket
•
with the proper voltage?
Has the light bulb burnt out?
•
In the case of burned out bulbs:
1.Always remove the power plug from the
socket.
2.See chapter “Maintenance and Cleaning”.
If the motor seems to run too much:
Is the condenser free of dust and fluff?
•
Are the doors properly closed?
•
Are the door seals properly fitted?
•
On hot days or if the room is warm, the motor
•
naturally runs longer.
If the door has been opened a lot or if a large
amount of food has been stored, the motor will
run longer to cool down the interior.
48
Remember
Motor running time depends on different things:
number of door openings, amount of food stored,
temperature of the room, setting of the
temperature controls.
If you have followed the above checks and
your appliance still does not work properly, get
in touch with the After-sales Service,
explaining the problem and specifying the
model and appliance service number (given on
the data plate).
If the refrigerator temperature is too high
Are the refrigerator controls correctly set?
•
Has a large amount of food been added to the
•
refrigerator or freezer?
Check that the doors are not opened too often.
•
Check that the doors close properly.
•
Make sure that air flow vents inside the
•
compartment are not blocked, as this
prevents the circulation of cold air.
If there is moisture build-up
Make sure that air flow vents inside the
•
compartment are not blocked, as this
prevents the circulation of air.
Make sure that the food is properly
•
packaged. Dry any dampness on food
containers before placing them in the
refrigerator.
Check that the doors are not opened too
•
often. When the door is opened, humidity
from the room air enters the refrigerator. The
more often the door is opened, the faster
humidity builds up, especially when the room
itself is very humid.
If the room is very humid, it is normal for
•
moisture to build up inside the refrigerator.
It is normal for droplets of water to form on
•
the back wall after the automatic defrost
cycle.
If the doors do not open and close properly
Check that food packages are not blocking
•
the door.
Check that the pans, shelves, drawers and
•
ice maker are all positioned correctly.
Check that the door seals are not dirty or
•
sticky.
Make sure that the refrigerator is level.
•
49
WATER FILTRATION AND MONITORING
SYSTEM (ON SOME MODELS)
The water filter indicator light
The water filter indicator light indicates when to change the
water filter cartridge. The light is located on the control
panel. When the light changes from green to yellow, this
means that it is almost time to change the water filter
cartridge (90% of the filter life has been used). The water
filter cartridge should be replaced when the water filter
indicator light changes to red. Or when water flow to your
water dispenser or ice maker decreases noticeably (See
“Changing a water filter cartridge” later in this section).
NOTE: Do not use with water that is microbiologically
unsafe or of unknown quality without adequate
disinfection before or after the system.
After changing the water filter cartridge, reset the water filter
indicator light by pressing the corresponding switch for 3
seconds.
The indicator light will change from red to green when the
system is reset.
Changing a water filter cartridge
The water filter is located below the freezer compartment
door.
Locate the water filter cartridge cap in the front base grille
1
below the freezer compartment door. Rotate the cap
counterclockwise to a vertical position and pull the cap
and filter cartridge out through the base grille.
: Since the cartridge contains water, some spilling may
NOTE
occur.
Remove the cartridge cap by sliding it off the end of the
2
old cartridge. The cap will slide to the left or right. DO
NOT DISCARD THE CAP.
Take the new cartridge out of its packaging and remove
3
the protective cover from the o-rings.
Slide the cartridge cap onto the new cartridge as shown.
4
With cartridge cap in the vertical position, push the new
5
filter cartridge into the base grille until it stops. Rotate the
cartridge cap clockwise to a horizontal position.
RUN WATER THROUGH THE DISPENSER UNTIL THE
6
WATER RUNS CLEAR (about 9-14 litres or 6-7 minutes).
This will clean the system and clear air from the lines.
: As air is cleared from the system, water may spurt
NOTE
out of the dispenser.
Ordering replacement filters
To order more water filter cartridges, contact an authorized
dealer.
1
2
3
4
5
50
DISPOSAL OF YOUR OLD REFRIGERATOR
Entrapment and suffocation are not problems of the past.
To a child, a scrapped or abandoned refrigerator can be
dangerous -- even if only left unattended for a few days.
Before you dispose of your refrigerator or freezer:
Take off the doors.
•
Leave the shelves in place so that children may not
•
easily climb inside.
ELECTRICAL CONNECTION
1) For Great Britain only
Warning - this appliance must be earthed
Fuse replacement
If the mains lead of this appliance is fitted with a BS 1363A
13amp fused plug, to change a fuse in this type of plug use
an A.S.T.A. approved fuse to BS 1362 type and proceed
as follows:
Remove the fuse cover (A) and fuse (B).
1.
Fit replacement 13A fuse into fuse cover.
2.
Refit both into plug.
3.
Important:
The fuse cover must be refitted when changing a fuse and
if the fuse cover is lost the plug must not be used until a
correct replacement is fitted.
Correct replacement are identified by the colour insert or
the colour embossed in words on the base of the plug.
Replacement fuse covers are available from your local
electrical store.
2) For the Republic of Ireland only
The information given in respect of Great Britain will
frequently apply, but a third type of plug and socket is also
used, the 2-pin, side earth type.
3) Socket outlet / plug (valid for both countries)
If the fitted plug is not suitable for your socket outlet,
•
please contact Whirlpool Service for further instruction.
Please do not attempt to change plug yourself. This
procedure needs to be carried out by a qualified
Whirlpool technician in compliance with the
manufactures instructions and current standard safety
regulations.
51
INSTALLATION
BEFORE INSTALLING THE REFRIGERATOR
PRECAUTIONS AND GENERAL
RECOMMENDATIONS
WATER CONNECTION
ELECTRICAL CONNECTION
LEVELLING YOUR REFRIGERATOR
17
BEFORE INSTALLING THE REFRIGERATOR
Foreword
Your new appliance is a FULL NO FROST model
exclusively for domestic use, i.e. both refrigerator
and freezer compartments are provided with an
automatic defrosting function.
This manual contains indications and warnings for
correct and safe installation of the appliance - read
it carefully before starting installation operations.
The model you have purchased may differ slightly
with respect to some descriptions in this manual,
since this manual covers several models.
Keep this manual for future consultation. If you sell
the appliance give it to the new buyer.
Declaration of conformity
This appliance is intended to come into contact
with foodstuffs and conforms to D.L. 108 of
25.01.1992 (European Directive 89/109/EEC).
Disposal of packaging materials
The packaging material for the protection and
transport of the appliance and single components is
entirely recyclable, and marked with the recycling
symbol .
Keep the packaging materials (plastic bags,
polystyrene parts, etc.) out of reach of children, as
they are potentially dangerous.
Disposal must be carried out in accordance with
local regulations for waste disposal.
PRECAUTIONS AND GENERAL
RECOMMENDATIONS
After unpacking the appliance, check for damage
and make sure that the doors shut properly. Any
damage must be reported to your dealer within
24 hours after delivery of the appliance.
Be careful not to damage the floors when you move
the appliance (e.g. parquet flooring). If, after
removing the doors, it is necessary to move the
appliance, make sure the internal components are
well secured and/or remove them in order to avoid
damage.
Because of the weight of the appliance, at least
2 persons are required to safely move/install it.
Installation of the appliance must be carried out by
a qualified technician.
Wait at least 1 hour before connecting the
appliance to the power supply in order to ensure
the refrigerant circuit is fully efficient.
Depending on the model purchased, the appliance
does not contain CFCs (if the refrigerant circuit
contains R134a) or HFCs (if the refrigerant circuit
contains R600a - Isobutane). Isobutane is a natural
gas with low environmental impact. Caution is
required, however, since isobutane is flammable.
Therefore, it is essential to ensure that refrigerant
pipelines are not damaged.
Data regarding refrigerant and insulating substances
is given on the rating plate.
Clean the inside of the appliance before introducing
food.
For correct and safe operation, install and connect
the appliance according to the instructions given in
this manual.
The appliance is set for optimum operation at
specific ambient temperature ranges, according to
the climatic class indicated on the data plate:
Climatic class Amb. Temp.
SN From 10 to 32 From 50 to 90
N From 16 to 32 From 61 to 90
ST From 18 to 38 From 64 to 100
T From 18 to 43 From 64 to 110
The appliance may not work properly if it is left for
a long period at a temperature above or below the
indicated range.
Temperature inside the compartments may be
influenced by various factors such as: position of the
appliance, ambient air temperature, frequency of
door opening.
Install the appliance in a dry and well-ventilated
place.
Avoid locations in direct sunlight or near a source of
heat (oven, heating, etc.). If this cannot be avoided,
install the appliance respecting the following
minimum distances:
Coal or paraffin stoves: 30 cm
Electric and/or gas stoves: 3 cm
Install and level the appliance on a floor strong
enough to take its weight and in an area suitable for
its size and use.
To allow product handling and sufficient air
circulation, leave at least 1 cm clearance at the
sides, above the appliance, and between the rear
panel and the wall.
(°C)
Amb. Temp.
(°F)
18
Removing the freezer door
19
Removing the refrigerator door
20
Mounting the freezer door
21
Mounting the refrigerator door
22
WATER CONNECTION
Disconnect the appliance from the mains power
supply before starting operations.
• The ice maker and water circuit must be connected to a
water supply of potable and/or chemically purified water.
• The water connection must be carried out in compliance
with local regulations.
• The appliance is supplied with a water tube, 2.330 m. long,
already attached to the back of the product, and is provided
with a transition connector for connecting to the water
supply (internal bag).
• Remove the shipping tape from the gray coiled water tubing
on the rear of the appliance.
• Remove the protective cap from the end of the gray water
tubing.
• Connect the water tube (1) to the transition connector (2).
Finger tightening and then 1 to 2 additional turns should be
adequate.
• Connect the transition connector (2) to the household
water supply (3).
• Make sure that the water tube is not twisted.
• The appliance is pre-set for operation at pressures between
1.7 and 8.1 bar (25 and 117 PSI).
• Open the water tap. Check for and eliminate any leaks.
• The appliance does not require any adjustment or water
drain.
23
ELECTRICAL CONNECTION
Regulations require that the appliance is earthed. The
manufacturer declines all liability for injury to persons or animals
and for damage to property resulting from failure to observe the
prescriptions.
Make sure that the installation and the electrical connection are
carried out by a qualified technician according to the
manufacturer’s instructions and local safety regulations.
If your new appliance is provided with a plug with no earth wire,
connect the green/yellow earth wire (A) to the earth screw
located on the appliance (B) (see figure).
Ensure that the voltage indicated on the appliance data plate
corresponds to the mains voltage.
The plug of the appliance must be easily accessible even after
installation so that the appliance can be unplugged if necessary.
If this is not possible, connect the appliance to the mains supply
by means of a two-pole switch with minimum break distance
between contacts of 3 mm, fitted at an easily accessible point.
If the power supply cable plug and socket are not of the same
type, replace the socket.
Do not use extension leads or adapters.
After installation, make sure that the appliance is not standing on
the power supply cable.
Disconnect the appliance from the power supply by unplugging
it. Do not pull the power supply cable.
24
LEVELLING YOUR REFRIGERATOR
The refrigerator has two front and two rear wheels at the
base of the product on each side that can be adjusted.
If the appliance seems unsteady or you want the doors to
close easier, adjust the appliance’s tilt following the
instructions below.
1. Check the installation location to be sure you have at least
1 cm clearance on all sides including the top.
2. Connect the appliance to the mains power supply.
3. Move the refrigerator into its final position.
4. Open both doors and remove the plinth to locate the
levelling bolts at the left and right of the refrigerator base.
The top bolt (1) will adjust the rear wheel, and the bottom
bolt (2) will adjust the front wheel.
5. Use the wrench provided to adjust the levelling bolts. Turn
the levelling bolt clockwise to raise the appliance, or anticlockwise to lower it.
It may take several turns of the levelling bolts to adjust the
tilt of the refrigerator.
Note:do not unscrew the levelling bolts too much when
lowering the appliance as they could fall out.
Aligning the doors
If, after switching on the appliance and adjusting the refrigerator
and freezer doors, the doors are misaligned, disconnect the
appliance from the power supply and adjust both doors as
indicated in the enclosed diagram.
25
Horizontal alignment of freezer door
26
Horizontal alignment of refrigerator door
27
Vertical alignment of freezer door
28
Vertical alignment of refrigerator door
29
Loading...