Smeg AE2 User manual [GB]

-EN-AE2/DS -

19390290000-AE2DS_EN.docx

1

Rev. 01 - 03/01/2012

Read the safety warnings and instructions for the thermodisinfectors in which the rack is used
withcare, together with the safety instructions of the producer of the glassware and any other item placed on

the rack. Badly positioned items or glass which shatters during washing may cause dangerous injuries. If
necessary, washing results must be checked and subjected to non-visual inspections.

Qt.y

PART

NUMBER

DESCRIPTION

Qt.y

PART

NUMBER

DESCRIPTION

10

U430

Stainless steel nozzle
D= 4 H=30 (mm)

1

U6260

stainless steel nozzle
D=6 H=260 (mm)

1

U6220

Stainless steel nozzle
D=6 H=220 (mm)

1

-

Nozzle spanner

1

U6240

stainless steel nozzle
D= 6 H=240 (mm)

NOZZLE

(E.g. U390 means

Stainless steel nozzle with D=

3mm and H= 90mm)

AE2/DS - INSTRUCTIONS FOR ASSEMBLY AND USE

1 LIST OF COMPONENTS SUPPLIED

-EN-AE2/DS -

19390290000-AE2DS_EN.docx

2

Rev. 01 - 03/01/2012

2 BLOW-UP DIAGRAM

The blow-up diagram below is guideline; request up-to-date information on spare parts from your Smeg
contact, with reference to www.smegtech.com.

-EN-AE2/DS -

19390290000-AE2DS_EN.docx

3

Rev. 01 - 03/01/2012

1

1

1

1
1

1
11

11

2

3

4

POSITION

DESCRIPTION

1

U430

2

U6220

3

U6240

4

U6260

ILLUSTRATION

PROCEDURE

Fig.1

When inserting the rack in the disinfector, the
greatest care must be taken to ensure that the
tapered connection on the rack is aligned with
the one on the machine.

3 NOZZLE ASSEMBLY DIAGRAM

Rear

Front

4 ASSEMBLY SEQUENCE

This rack does not require assembly; simply take care to position the instruments correctly.
The system has been designed to ensure that no fluid remains inside or on the instruments, to provide the
very best hygiene standards.
Taking care to keep the lower edge of the rack at the front, load the instruments and place the rack inside
the appliance.

-EN-AE2/DS -

19390290000-AE2DS_EN.docx

4

Rev. 01 - 03/01/2012

WARNING

WARNING

Raise the spring underneath the support to allow the

liquid to flow freely.

Slide the tubes right along the length of the support.

Load catheter tubes by inserting then onto the

nozzles at the front and resting them on the supports.

Place masks on the rear supports.

5 USE AND PRECAUTIONS

Via Leonardo da Vinci, 4 – 42016 Guastalla (RE) Italy

E-Mail: [e-mail] – www.smeg-instruments.com

Smeg S.p.A.

Instruments Division

Tel. [phone] - Fax + 0522 821 592